How do i tell if i have itunes 32 or 64 bit?

I wanted to know how to tell if I have itunes 32 or 64 bit. I'm not sure how to do this. I started the task manager and it says "itunes.exe 32". Does this mean I have the 32 bit version?

I'm not sure how to do this. I started the task manager and it says "itunes.exe 32". Does this mean I have the 32 bit version?
That's normal on a 64-bit version of iTunes. (It's a mix of 32-bit and 64-bit componentry, and the itunes.exe is 32-bit.)
Is your iPodservice.exe running as 64-bit? If so, and your itunes version is 9.x or higher, you've got a 64-bit iTunes installed.

Similar Messages

  • HT1420 how can i tell which computers have sharing on it

    how can i tell which computers have itunes sharing on it, i am at my limit but dont have five computers

    You cannot.  There is no list.
    Deauthorize all then authorize the active ones.

  • How is the best way to have Itunes notice your app or drive traffic to the app store?

    How is the best way to have Itunes notice your app or drive traffic to the app store? What are the best ways based on experiance that works to drive traffic to your app as a paid game for .99?

    Write an app people want to buy and rate highly.

  • How can i tell if i have flashback malware

    How can I tell if I have the flashback malware? Will installing the latest security update get rid of the malware /virus and protect my computer?

    Here's what I am suggesting as a rudimentary test for some of the known strains of the flashback trojans.  Open a terminal window and copy/paste each of the following lines hitting return after each one and note the results:
    defaults read ~/.MacOSX/environment
    defaults read /Applications/Safari.app/Contents/Info LSEnvironment
    ls -la ~/Library/LaunchAgents
    grep "/Users/$USER/\..*" ~/Library/LaunchAgents/*
    For the two defaults command if you get anything other than a "does not exist" error message post the results since you are almost certainly infected.
    The third command, ls, just lists the contents of your LaunchAgents, if any.  That's additional info to be used in conjunction with the last grep command.  If the grep shows any results then that too may indicate infection and again post its results.

  • How can I tell if I have an ipad 3?

    How can I tell if I have an ipad 3?

    Or type in your serial number (Settings > General > About > Serial Number) in on this page : https://selfsolve.apple.com/agreementWarrantyDynamic.do

  • How can I tell if I have an iPad or iPad 2?

    How can I tell if I have an iPad or iPad 2?

    2 cameras actually.
    One on the front, one on the back.

  • How do i tell if i have a iphone3 or 3gs model number is A1303

    how do i tell if i have a iphone3 or 3gs model number is A1303

    Google will take you straight to Apple's iPhone list - http://support.apple.com/kb/ht3939

  • I have an emac OS X 10.4.11. How can I tell if I have . . .

    I have an emac OS X 10.4.11. How can I tell if I have iMovies and a firewall?
    Thanks.

    1. Check if it's in the Applications folder in the Finder's sidebar.
    2. Check the Security and Sharing panes of System Preferences.
    (66033)

  • HT3939 how can i tell if i have a iphone 3 or 4

    how can i tell if i have a iphone3 or4

    http://support.apple.com/kb/HT3939?viewlocale=en_US&locale=en_US

  • How can I tell if I have skype on my IMac?

    How can I tell if I have skype on my IMac?  I have an Icon on my MacBook Air, which I have not used, but on the IMac there is not an Icon;  how do I set this up?

    Open Spotlight and type in Skype. If Spotlight doesn't find anything, Skype is not installed.
    Alllan

  • How can i tell if I have botware on my mac?

    There have been numerous stories in the news in recent days regarding botware attacks on macintosh computers in recent days. how can i tell if I have botware on my mac? thanks.....

    This app was just released......
    http://www.macupdate.com/app/mac/42571/anti-flashback-trojan

  • How do I tell is Windows 7 is 32 or 64 bit?

    How do I tell if Windows 7 is 32 or 64 bit?

    Right-click on Computer and select Properties.
    Under the System area, look for an entry called System Type.

  • How can I tell which songs have been iTunes matched?

    When first using iTunes Match, how can I tell which songs were 'matched' and which were simply uploaded?

    Simply turn on the iCloud Status and iCloud Download fields on your library view - you can then see whether the Song is 'purchase', 'matched' or 'uploaded'.

  • How can you tell which files have backed up to external hard drive using Time Machine?

    Hello Mac Users,
    I have Macbook Pro (early 2011) and recently purchased a WD My Passport for Mac external HD. I have completed a back up using Time Machine, however how do I tell what files actually were backed up? I have a ton of audio, documents and photos that I would like on there. Its a 2 TB HD, my memory is 750 GB... Im using 632. At end of back up, the drive still had 1.88 TB left. Any help would be appreciated! Thanks
    Linz19

    This procedure is a diagnostic test. It makes no changes to your data.
    Please triple-click anywhere in the line below on this page to select it:
    tmutil compare | open -ef
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
    The command may take several minutes to run. Wait for a new line ending in a dollar sign ($) to appear below what you entered.
    A TextEdit window will open with the output of the command. Don't post all the output; just read it yourself. Each line that begins with a plus sign (“+”) represents a file that has been added to the source volume since the last snapshot was taken. These files have not been backed up yet.
    Each line that begins with an exclamation point (“!”) represents a file that has changed on the source volume. These files have been backed up, but not in their present state.
    Each line that begins with a minus sign (“-“) represents a file that has been removed from the source volume.
    Files that you’ve excluded from backup, or that are excluded automatically, are ignored.
    At the end of the output, you’ll get some lines like the following:
    Added:
    Removed:
    Changed:
    These lines show the total amount of data added, removed, or changed on the source(s) since the last snapshot.
    Caution: Under some conditions, tmutil may falsely flag files as not having been backed up when in fact they have been. It can be confused by multi-linked files, or by files with a modification date earlier than the one in the snapshot. This will not be an issue for most users. If the results of the above procedure surprise you, inspect your snapshots directly.

  • How can I tell if I have BizTalk server 2013 or 2013 R2

    I have the developer version intalled on my machine.  How can I tell if it's 2013 or 2013 R2?  In looking at the version it states Version: 3.10.229.0
    thank you.
    jRenae.s

    Thank you Maheshkumar,
    I also looked in programs and features.  But wasn't sure if it would be obvious just by at the name - it shows 'Microsoft BizTalk Server 2013 Developer Edition'.  
    So if it was R2 would it show 'Microsoft BizTalk Server 2013 R2 Developer Edition'?
    Jean
    jRenae.s

Maybe you are looking for

  • PSE 7 Crashing

    We have been running PSA 2 with over 10,000 images.  Recently installed PSE 7 and did a catalog convert per instructions in http://kb2.adobe.com/cps/404/kb404990.html.  The old catalog was under 'My Catalog' and since it said the name was already use

  • Unity Message Aging Policy

    All, is there anyway to customize the Message aging policy beyond the options that are present?  As an example any way to move a message from New Directly to Deleted Folder after 10 days but bypass the Move to Saved folder? Thanks, All replies rated.

  • G5 Startup Failure

    What action do I take to correct the following on my G5 (June 04) dual processor: On safe boot there is an error mapping AppleIntel CPUPower Management.  Can't allocate class.  This occured after taking many steps described in the technical resource

  • All programs can't find Hard drives

    The Bios is showing up with; DO Maxtor 6Y080M0 76324MB Ultra DMA 5 D 1 Maxtor 6Y080M0 76324MB Ultra DMA 5 IDE Bus Enabled  SATA Tx2 Plus (tm)  Bios Version 1.00.1030.26 Promise Technology In the Select first Boot device  is floppy : 1:44 CD/DVD - 0 :

  • Authorization object Z_PRPS_ANR missing

    Hi All, One user tried running CJIC and the error msg thrown" No costs, revenues or Finances were selected" The SU53 screen shot gives the following details: Missing Auth Obj:Z_PRPS_ANR. There are two roles found which links with this object 1. maint