How do I tell if my Firewire is 4 pin or 6 pin

How do I tell if my iMac has a 4 pin or a 6 pin firewire connection. I'm looking at buying a external DVD drive using firewire and there seems to be two platforms 4 pin and 6 pin. I have used the System profiler and all it tells me is transfer rate.
If anyone can tell me where I can get the info I would be grateful.
iMac G4 800 MHz
iMac G4 800 MHz 17 in Flat Panel Mac OS X (10.4.4)

Hi Gary,Welcome to Apple Discussions.
All Macs with Firewire have 6pin Firewire 400 connectors. They are superior as they provide power to a device as well as data. Only some PCs and some devices use 4pin FW400 connectors which transfer data only.
For your information please see the diagram below which shows both connector types.
6 pin:
4 pin:
The diagram shapes are correct but the scale is not.
regards
mrtotes

Similar Messages

How can I tell if my firewire port is faulty?

I recently cannot import video from my canon elura 100 which connects using a 4-6pin firewire cable. I thought maybe it was the cable so I grabbed my brother's black macbook and it seems to import fine, it still isn't 100% smooth like I think it should be but when I plugged the camera back into my black macbook, the video that was being imported just kept freezing and it seemed warped. I tried this process a few times and kept getting the same results. I feel as though I may have a firewire port issue. How could I check on my own. I know that when I use my firewire 410, I have no problems so I don't know what could be wrong. Any help?

Did any of your problems start with Snow Leopard, is your brother's machine running the same version of SL.
Over in the audio forum there are those having some problems with their firewire interfaces. (glitches, static...etc)
pancenter-

How can I tell if my firewire is blown?

I bought a firewire card in the past 12 months to replace my other firewire card that went out on me. Now, my computer is not finding my recent one either. It crashed on me several times trying to start up Final Cut Pro and then the externals just "vanished". I have two external drives and a digital video camera connected and have restarted several times to the same effect... no firewire found (under About This Mac > more info).
Do all firewire cards self destruct after a year usually or is there something I am missing? Can I test this someway?

I guess what I was asking was, can I test my firewire card some way outside of just seeing it is not being read by my computer? And is there a history of Lacie cards going out with Apple products?

PLEASE HELP! How can I tell if my Imac has been hacked?

PLEASE HELP! How can I tell if my Imac has been hacked? I see a few people have asked this question but the responses tended to be advice on what to do once you've been hacked, not what can done to find out if you have been hacked. I have a late 2012 model imac. My sharing was off and remote logging was off. I use an external router that send wireless to about 4 consoles in the flat. I don't think I have any firewalls up (now looking like a mistake). I think I'm possibly being hacked due to abnormal behaviour and most recently my camera was turned off all day (no LED) then I went to record something on Photo Booth, the application popped up displaying an image of me getting dressed (nightmare!) which happened hours earlier when the camera was off. This image quickly then disappeared and the camera began working normally. Very strange and alarming. Please help me. Any advice would be very much appreciated. Thanks.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
Copy a line of text in this window to the Clipboard.
Paste into the window of another application.
Wait for the test to run. It usually takes a few minutes.
Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/d;/(etc|Preferences)\//s/^\.\/[^/]+//p;' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' 's/0/Off/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;D12 26 48 59 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

My macbook pro no longer connects to my TV with the mini dvi to hdmi adapter. A while ago the computer fell down and hit the cable. How can I tell if the computer is working ok. Doesn't show mirroring any more.

My macbook pro no longer connects to my TV with the mini dvi to hdmi adapter. A while ago the computer fell down and hit the cable. How can I tell if the computer is working ok. Doesn't show mirroring any more. Was working while watching a movie but when I pulled it out from the computer and put it back in the system would no longer mirrorr the screen on the TV.

The best option is an appointment at an Apple store genius bar. The evaluation will be for FREE!
Ciao.

How do i tell if a phone is a 4 or a 5 model?

how can i tell if a phone is a 4 or a 5 model?

Append the last three characters of its serial number to http://www.everymac.com/ultimate-mac-lookup/?search_keywords= and load the page.
(108875)

I'm too old to learn iCal. How do I tell iTunes to synch with Outlook for Mac for all of the Contacts and the Calendar on my iPhone and iPad?? Thanks

I'm too old to learn iCal. How do I tell iTunes to synch with Outlook for Mac for all of the Contacts and the Calendar on my iPhone and iPad??
Also, once I figure out how to replace iCal with Outlook/Mac on iTunes, how do I synch the phone and pad so that the information on those devices over-writes onto Outlook as a backup, rather than having a blank Calendar on Outlook wipe out all of the information on the phone and pad???
Thanks

If you haven't tried already, plug your devices into iTunes, and on each device next to the "Summary" tab at the top is another tab called "Info." Click that and scroll down to Contacts, Calendars, etc. There should be a pull down bar under each category for "Sync contacts from..." and you should be able to select from that pull down list Outlook. Hit Apply at the bottom and see if that does it.

ITunes library only shows music in the cloud, how do I tell it to show the library on my hard drive? iTunes 11.0.2.26

I don't know how this happened.
I opened iTunes last night and the player only lists items from the cloud, which is a small percentage of my itunes library - no podcasts, no playlists. Somehow the iTunes players has "forgotten" that my music library is on my hard drive.
How do I tell the iTunes player where to look for my library? In About iTunes, the version I am running is 11.0.2.26
Also, how did some random songs/albums end up on the cloud when I didn't put them there? Some of the songs were purchased through itunes but not all and not all of my purchased songs, etc. show up on the cloud. I'm so confused.
Thans for your help!

See this post.
tt2

My ipad does not have the amount of GB on the back and in the settings it says 56gb! Also there is no setting called regulatory. It is an ipad 4 retina w wifi that i got as a Christmas present. Could it be a fake? How can i tell?

My ipad does not have the amount of GB on the back and in the settings it says 56gb! Also there is no setting called regulatory. It is an ipad 4 retina w wifi that i got as a Christmas present. Could it be a fake? How can i tell?

The amount of storage that is shown on the box and in Settings are calculated differently - the package uses 1 billion bytes as a gig (i.e. decimal), whereas in Settings it's shown as the binary definition : http://support.apple.com/kb/TS2419
Also some space has been used for iOS, the built-in app and some space is lost due to formatting.

How do I tell what version (update / release level) of version 6 has been applied to my system?

Question
How do I tell what version (update / release level) of version 6 has been applied to my system? I have applied several different release levels to version 6 of FF but all the about feature tells me is Version 6.0. no version! This seems to be a change in the way updates are handled. Is that a bending because of the speed of which you're pushing out updates and new releases?
contact me if you need something more
''deleted email address''

@cchur <br />
Nope, I never used Chrome, but I did try Chromium on my Windows desktop PC for a few months last year. I got tired of the Google updater. exe running all the time and Google's method of doing updates, so it's gone. I do have Chromium on my Linux EeePC since last summer, but Ubuntu handles all updates and gives the user the capability to accept or deny, any or all updates - much more to my liking, similar to the way Mozilla does it. I don't like software developers forcing to update until I am ready to proceed.
There's a lot more about this new Fast Release system, than just the lack of visible version numbers, that I don't like. The Nightly, Aurora, Beta, & Release sequence is dumb with the way it changes the version numbers. I prefer installing (for instance) what will become version 7 and have that installation progress thru the 4 stages, instead. Now it's like Nightly going from 7 to 8, Aurora going from 6 to 7, and Beta doing - hell, I won't know if it becomes a Release or if it just dies and I will have to install the Release version myself. ''Quite honestly I don't care, because I don't think this new "system" is going to last too long without major modifications. Too damn many users are so pissed off, that when Firefox starts losing large numbers of users, Chrome keeps growing and eventually passes Firefox in number of users and market share of usage - Mozilla will wake up and see the "light" and change back to the way things used to be done, to a certain extent.''
I also dislike the UI changes in 4/5/6/7 enough that I am still using Firefox 3.6 for almost everything and Firefox 2.0.0.20 for the rest. I have been setting my toolbars up almost like Mozilla did for Firefox 4, since Firefox '''0.7''' in 2003 and I haven't come up with a workable combination of mods and extensions to configure Firefox to look and work the way I have been doing for almost 8 years now.

How can I tell what is "Auto Launching"

User's (me) tech background:
Fairly technical user here, but getting pretty rusty. In a past life (late '90s) I was a network administrator as well as server admins for NT 4, Novell (up to 4.11), AIX, and HP-UX servers. Used to be really good at a command prompt ($ or #) in AIX and HP-UX as well as MS DOS. I do have ROOT enabled on my Macs and I am not afraid to use it. However, I know how severe the consequences can be (trashed a customer's AIX server once using a -R switch in the root directory), so I am extremely cautious and must be confident of the instruction. Can probably fix most anything with some guidance........
Here is the problem........ I have recently developed an error on boot, say within the last couple of weeks, where it tells me that some Vista application won't run because VM Ware will not initialize. The problem is VM Ware is not loaded on this computer (15" MBP model 8.2, i7 processor, 16MB of RAM, OS 10.7.4........ bought as a "refurb", never had a problem, have used this workstation for several months now). Boot Camp is not configured on this machine either. Nothing is in the Dock that would knowingly trigger this. When I go into System Information, I find nothing set as a "Startup Item" (screen shot attached) , making me think that I am looking in the wrong place. Where should I be looking?
Interesting enough, when I go to System Information, and look under "Applications", I do see a lot of Vista items, including apps from an older MBP that I do not connect to (on same network, they have "rights" to connect, I just never do as there is nothing on there I need). I have attached a screen shot of this as well.
Please, someone, can you give me some advice here?
How can I tell where this auto loading of this Vista app is coming from
How do I get rid of it
Why did it happen "suddenly"?
Can I go into System Info/Applications and delete any Vista or VM Ware apps?
If I cannot do this via "System Info" can I remove (rm OR mv) the files from whichever system directory stores this data?
This is puzzling and quite concerning. I would be deeply grateful if there is a "Yoda" out there that knows how to fix this.......
Thanks in advance,
Bill

Managing your data usage is very important Bag02231958. I would like to thank ttipgem for the great suggestion to see what is using data on your phone. However, when you access the internet, social media apps, stream data, videos, music, etc. that uses data on your phone. Unfortunately, we do not have a list of what specifically is being accessed on the device to incur data. You do have the ability to view data records and time frames online via My Verizon http://bit.ly/xB4iTc
Thank You,
MichelleL_VZW
VZW Support
Follow us on Twitter @VZWSUPPORT

"Volume not found" I have 3 iphoto_libraries stored in a external disk, while the actual files are in other external disk. Ive moved together iphotolibraries and files but: HOW CAN I TELL THE LIBRARIES WHERE TO FIND THEM NOW?

I have three iphoto_libraries stored in a external disk PASSPORT (one for each trip imovie Im making -Ive managed this way the libraries so to not confuse the trips) while the actual files are in OTHER external disk LACIE. And everything was fine: imovie find each library, could work with it, or iphoto could edit the files.
But one day everything crashed at the same time: i opened iphoto to find 3 different scenarios:
1) iphoto_library GREECE was there, but not the albums i prepared. no events. when double click in any of them: "Volume not found"
2) iphoto_library ITALY was there, and the albums i prepared too, but empty.
in both cases I can only see the photos in 'photos' because 'events' shows some events with photo preview and some with no preview, just some kind of preset clipart palm tree, but if i enter the event, photos are there but again: when double click in any item: "Volume not found"
3) iphoto_library ISRAEL was there, the albums too, when double click in any of them: all OK
The 3 libraries was managed the same way. Meaning: Ive imported photos to iphoto from external disk LACIE in a iphotolibrary stored in another external disk PASSPORT. Also: I don't have unchecked the option "copy to file" or something like that. photos where moved, not copied. Also i have all the movie_libraries in the PASSPORT as well. What happened??
Solution? Nothing yet. Ive moved now all the photo folders from LACIE together in PASSPORT with the iphotolibraries but problem persist:
HOW CAN I TELL THE LIBRARIES WHERE TO LOOK FOR THE VOLUMES NOW?
"Volumes" are the original files aren't them?
Please help. this is so annoying to try and find in the forum, to tricky to explain
I have a Macbook pro retina Yosemite 10.10.1 / iphoto 9.6 (910-29)/ iMovie 10.0.6
THANK YOU
Vicky

The 3 libraries was managed the same way. Meaning: Ive imported photos to iphoto from external disk LACIE in a iphotolibrary stored in another external disk PASSPORT.
This is not clear, especially when you say
I don't have unchecked the option "copy to file" or something like that. photos where moved, not copied.
Especially as the message you're getting is typical of a library where the ' option "copy to file" or something like that' is unchecked.
So it's a simple question:
Are you these Managed or Referenced Libraries?
A Managed Library, is the default setting, and iPhoto copies files into the iPhoto Library when Importing. The files are then stored in the Library package
A Referenced Library is when iPhoto is NOT copying the files into the iPhoto Library when importing because you made a change at iPhoto -> Preferences -> Advanced. (You unchecked the option to copy files into the Library on import) The files are then stored where ever you put them and not in the Library package. In this scenario you are responsible for the File Management.

How can i tell what computers are authorized with my itunes account?

My iTunes app tells me that I have 5 computers currently authorized with my account. How can I tell which ones they are??? I've checked all of my old desktops and laptops to deauthorize them but they indicate that they were never authorized. Confusing. Why go to the trouble managing how many are authorized if you don't provide a means to list them??? I realize that I can deauthorize them all (the only choice!) but, in doing so and reauthorizing the ones I need, does this mean that I lose the ability to access previously purchased music on them?? I must say that, for the ease of use of the Apple apps, I expected more. Thanks:-) !

You cannot. You can see the number of authorised machines.
Go to itunes Store, Select Account from Quick Links on the right.
If you already have 5 authorised but can't remember which the machines are you have the option of once every 90 days to deauthorize all comuters and then individually reauthorising the ones you want.
On each machine in iTunes Click Store > Authorise this computer

How can I tell if Time Machine is backing up my external HD?

Mac Newbie here. I just have a quick question: I have two external HD hooked up to my 2012 iMac, one holding media files (not iTunes, just miscellaneous avi and mkv type files) and the other serving as the backup drive for use with Time Machine. When I first hooked up the media external HD, the OS asked me if I wanted to use it with Time Machine. Interpreting that as a request to use it as the backup drive, I replied "no." Then when I hooked up the second external HD, I replied "yes" when asked if I wanted to use it with Time Machine.
Since that time, Time Machine has been running smoothly, but I'm not sure if it is backing up both my internal HD and my external HD #1 used for media files. When I open Time Machine using Launchpad, it shows me a picture of Finder listing all my different hard drives, but only in the "now" timeframe. When I go back a few backups, the external HD used for media files is grayed out. Does that mean it has not been backing up my external HD files? If so, how do I tell it to include that external HD in the backup process?
Note that I am trying to backup contents of one external HD (including my internal HD) to another - the internal HD has 1 TB, the first external HD has 2 TB, and the second external HD has 3 TB (this is the one I'm using as the backup drive). So I think I should be ok from a space standpoint.

Open System Preferences > Time Machine > Options and see Excluded Items. If the external drive is there, it's not being backed up

How can you tell if a pic hasnt been tagged by iPhoto, and do you then...

How can you tell if a pic hasnt been tagged by iPhoto, and do you then do you then have to draw "missing box" around them
What I mean is tagged a few faces, imported some more pics, checked a few and they dont show as named faces, but are faces that are in my Faces source list (ie identified and named)
So do I then have to draw a box around known faces to me, and name them again (I think iPhoto will pop up as Im typing the names I already have)
It just means that even when i import and it doesnt name, I may have lots of pics that are of faces but not tagged and so not in my faces source list
please help
cheers
ps when are Apple going to upload the Getting Started manuals for iLife 09? its been a while since released now, ad they give a bit more insight than the video tutorials alone

No-one? It'll be nice to know how many pics of faces that arent yet tagged
cheers

How do I tell if my Firewire is 4 pin or 6 pin

Similar Messages

Maybe you are looking for