How do I tell Leopard NOT to connect to a particular local drive?

I don't want my Leopard computer to automatically connect as guest to the Tiger computer.
Leopard does not automatically connect to it. If it shows in the sidebar you are not connected to it. The sidebar is just showing what computers on the network are available to connect to. To connect to it you still have to click on the connect button.
To stop it showing the sidebar you have to turn off file sharing on that mac.

Similar Messages

How can I tell if I'm connected at 5ghz??

I just bought an Airport Extreme and realize that it can connect at 2.4 or 5ghz, but how can I tell which it's connected to?
Thanks!

Your computer is connecting at 2.4 GHz because it "sees" that as the better quality signal where it is located. 5 GHz signals are absorbed by walls, ceilings and any obstructions much more quickly than 2.4 GHz signals.
Unless you are relatively near the AirPort Extreme and have close to line-of-sight between your computer and the AirPort Extreme, your computer will likely connect at 2.4 GHz.
Are you asking if you can "force" your computer to connect to the 5 GHz band even though it may not be the best signal?

HT5569 How can I tell if iPhone Internet connection is rooted through another computer

How can I tell if iPhone Internet connection is rooted through another computer

If you are connecting directly to your WiFi router which coonects to your ISP modem then another computer is not involved.

How do I tell iphoto NOT to load ALL images from camea and iphone, only new images?

I've bee using my MacBook Pro, iphoto and Nikon for many years. I travel alot and take many pictures, and like to keep them on the memory cards as an extra backup. All was going great on a recent trip, until one day, suddenly, when I plug camera into computer, iphoto opens (as usual) but it starts downloading ALL of the old images on the memory card instead of just the ones that have not already been imported! It takes forever when you are using a 16GB card!! Is this due to some update I installed? How do I tell iphoto not to do this?! I only want to see images not yet imported, as it used to be. I am using OS X 10.6.8 and iphoto '09 - 8.1.2 And, this same thing is happening with my iphone, and my other camera.

iPhoto does read all images (how else can it know if it has already imported them or not) and then gives your oppertunity to import new, all or selected
Yes it does take a bit to get all images and see what needs to be imported - I use 32 GB cards - and the other issue is that if you delete impoprted photos next time you use the card the deleted ones will be in the new list so you have to select the rest and import selected - I've found no solution to this
LN

How can I tell the device is connected to itunes 12?

how can I tell the device is connected to itunes 12? I have Windows 8. I hear that the device is connected, but don't see the device to manage. Only thing that happens is on the phone it says Trust the computer.. I say Trust and nothing happens.

in ituens at the top where you see the small icons for Music, Movies, TV etc when your device is connected you will see a small icon representing your phone or ipad etc popup click that and it will show you the usual interface for backup and syncing.
if that doesnt happen, like it didint for me initially, you should close itunes fully via task manager if you know how to do this and start it again with the device unplugged then plug it in after itunes has finished loading.
Worst case scenario you nee to resatrt

How do I tell iTunes not to install on sync apps that I downloaded?

I upgraded my SSD on my Mac and I thought I'd download all my apps so they were backed up on my computer. However, now iTunes tries to install them all on my iPhone whenever I try to sync it. I don't have nearly enough space on my iPhone so I always get a bunch of "ghost" apps and an error message that my iPhone is out of space every time I sync. How do I tell iTunes not to attempt to install these on my iPhone on sync? The only options to choose from are "Install" and "Will Install".
Thanks.
I have OS X 10.9.3, iTunes 11.2.2 (3), and iOS 7.1.1.

The easiest way is to simply remove the previous apps from your account, then sync all your apps. You can remove unwanted apps via iTunes. If you want a step by step instructions go to: http://www.cnet.com/how-to/how-to-delete-unwanted-ios-apps-from-itunes/

How do I tell Lightroom not to boot automatically?

When I load photos from my camera to my computer, Lightroom boots automatically and interferes with my loading. How do I tell Lightroom not to boot automatically under any circumstances? I cannot find that option in any menu.
John Johnson

Do one or more of the following solutions:
Solution 1: Turn off the Adobe Photo Downloader start-up item.
1. Right-click the Adobe Photo Downloader located on the far right of the Windows Task Bar.
2. Choose Exit.
Note: This turns off the Photo Downloader for your current Windows session, only.
Solution 2: Turn off the Adobe Photo Downloader permanently.
1. Choose Start > Run, and type in msconfig. Click OK.
2. Choose the Startup tab.
3. Uncheck apdproxy. Click Apply, and then click OK. Restart Windows.

How to identify that a host is connected to which particular edge switch

Hello Guys
Can anybody explain how to identify that a host is connected to which particular edge switch and port in a Cisco SAN Fabric ??

Hi,
Hopefully you know the host PWWN.
If the edge switch is not in NPV mode, get the FCID from the output of "show fcns database"
The answer may also be as simple as finding this entry in the "show fcns database detail".
If not, once you have the fcid, the first byte of the fcid is the switch domain ID. With the combination of "show fcdomain domain-list vsan xx" "show fcs ie" you should be able to determine what you need.
If the edge switch is in NPV and registers as a NPV device ( Cisco switches do ), then the FCID will be assigned by the core switch upstream of that edge switch. You can see this from a "show flogi database". Find the PWWN here. There will likely be multiple entries for the port where the host is connected. Once you find the port where the NPV switch is attached. The first flogi entry on that port will be the switch WWN. Get the FCID for the switch and then find the entry for this FCID in the "show fcns database detail", this will give you the switch information.
Best regards,
Jim

How do I tell if I am connected to Time Machine or my Linksys Router

OK, so I set up my Time Capsule. When configuring I chose to extend my existing wireless network, with the description that the TC and my existing network would have the same name/settings, and that my MacBook Pro and other Macs would automatically connect and chose the strongest signal.
In my Airport menu item I only have one named network showing, which seems correct. But is there an easy way of telling if I am wirelessly connected to my Linksys router or the TC. For example, when I open my MacBook Pro (which does not have the airport manager software on) it connects, but to which device?

Many thanks, this has helped, as I looked up the MAC address of the two devices and can now tell which I am connected to.
However, is there a more friendly solution... one that would show the physical description of the device (eg. Time Capsule - or whatever I named it).

When my wife goes to login to Yahoo mail, my email Id and password automatically appear. How do I tell Firefox not to populate these fields with my id and passwords. Basically how do we not have firefox automatically fill in these fields.

When my wife was already login to our shared computer, I went into Yahoo email and told the computer to save my login and password. Now, everytime my wife goes to login to her Yahoo email my ID and Password are filled in. How do we have firefox not remember the Yahoo ID and Password for anyone?

When my wife was already login to our shared computer, I went into Yahoo email and told the computer to save my login and password. Now, everytime my wife goes to login to her Yahoo email my ID and Password are filled in. How do we have firefox not remember the Yahoo ID and Password for anyone?

ITunes library only shows music in the cloud, how do I tell it to show the library on my hard drive? iTunes 11.0.2.26

I don't know how this happened.
I opened iTunes last night and the player only lists items from the cloud, which is a small percentage of my itunes library - no podcasts, no playlists. Somehow the iTunes players has "forgotten" that my music library is on my hard drive.
How do I tell the iTunes player where to look for my library? In About iTunes, the version I am running is 11.0.2.26
Also, how did some random songs/albums end up on the cloud when I didn't put them there? Some of the songs were purchased through itunes but not all and not all of my purchased songs, etc. show up on the cloud. I'm so confused.
Thans for your help!

See this post.
tt2

How can you tell which files have backed up to external hard drive using Time Machine?

Hello Mac Users,
I have Macbook Pro (early 2011) and recently purchased a WD My Passport for Mac external HD. I have completed a back up using Time Machine, however how do I tell what files actually were backed up? I have a ton of audio, documents and photos that I would like on there. Its a 2 TB HD, my memory is 750 GB... Im using 632. At end of back up, the drive still had 1.88 TB left. Any help would be appreciated! Thanks
Linz19

This procedure is a diagnostic test. It makes no changes to your data.
Please triple-click anywhere in the line below on this page to select it:
tmutil compare | open -ef
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
The command may take several minutes to run. Wait for a new line ending in a dollar sign ($) to appear below what you entered.
A TextEdit window will open with the output of the command. Don't post all the output; just read it yourself. Each line that begins with a plus sign (“+”) represents a file that has been added to the source volume since the last snapshot was taken. These files have not been backed up yet.
Each line that begins with an exclamation point (“!”) represents a file that has changed on the source volume. These files have been backed up, but not in their present state.
Each line that begins with a minus sign (“-“) represents a file that has been removed from the source volume.
Files that you’ve excluded from backup, or that are excluded automatically, are ignored.
At the end of the output, you’ll get some lines like the following:
Added:
Removed:
Changed:
These lines show the total amount of data added, removed, or changed on the source(s) since the last snapshot.
Caution: Under some conditions, tmutil may falsely flag files as not having been backed up when in fact they have been. It can be confused by multi-linked files, or by files with a modification date earlier than the one in the snapshot. This will not be an issue for most users. If the results of the above procedure surprise you, inspect your snapshots directly.

How to download a clob file from a table to my local drive?

Hii Everyone,
I'm havig a table of this structure
Create table r_dummy
c_clob_file clob
How to download this file into my local drive?Please give me some hints.Can this be done using dbms_lob??
Regards
Raghu.

You need to share a directory on your local drive and give permissions for the database server to write a file on your local drive. Or you may create the file on your database server and copy the same to your local drive.
conn / as sysdba
create or replace directory ext_tab_dir as 'C:\ExtTab_Dir';
/* you may need to give a network path in place of C:\ExtTab_Dir if you want to create the file on your local drive. The directory should be created manually by you on the file system*/
grant read, write on directory ext_tab_dir to scott;
conn scott/tiger
declare
        clb clob;
        l_output utl_file.file_type;
        len integer(6);
        vstart integer(6):=1;
        bytelen integer(6):=32000;
        my_vr varchar2(32000);
        x integer(6);
begin
         l_output := utl_file.fopen('EXT_TAB_DIR','Clob_File.txt','w',32767);
        select c_clob_file into clb
         from r_dummy;
         len:=dbms_lob.getlength(clb);
         x:=len;
        while vstart < len and bytelen > 0
        loop
            dbms_lob.read(clb,bytelen,vstart,my_vr);
            utl_file.put(l_output,my_vr);
            utl_file.fflush(l_output);
            vstart:=vstart+bytelen;
            x:=x-bytelen;
            if x< 32000 then
               bytelen := x;
            end if;
        end loop;
        utl_file.fclose(l_output);
exception when others then
        utl_file.fclose(l_output);
        raise;
end;
/Edited by: Preta on Sep 29, 2010 10:53 AM

How can I tell if I am connected through "N" or "G"

I have the latest Leopard 10.5.2 and a Airport Extreme with "N". My question is how do I check to make sure I am connected by "N" and not "G"?

Using Airport Utility, connect to your main base station.
At this window, click on "Wireless Clients" near the bottom.
The new window will show you what each computer or device that is connected the:
1. Client
2. Signal
3. Noise
4. Rate
Basically, If you are running a b/g/n network, the "Rate" will be something like this:
54 for b/g connected clients
130 to 144 for "n" connected clients
If you are running only "n", then you should see 300 "Rate" but of course only "n" clients would be connected....
Joseph Kriz

How can I tell what devices are connected to my e2000

I have a cisco e2000. I just turned off guest access, but 'cisco connect' says I still have 4 devices conneted to my router. Is there a way I can tell what those devices are?
Also, even thoug the setup said my guest access had a password, I found out it did not. Any concerns about nosy neighbors?

Try to install Network Magic. It will show you what are the devices connected to your router. You can download it from here.

How do I tell Leopard NOT to connect to a particular local drive?

Similar Messages

Maybe you are looking for