How do I tell the difference between iPad 2 and the New iPad because they both look the same?

The box says iPad. How do I tell that I bought iPad or the new iPad? There is no way to tell the cpu is the new one or the camera is better when this is my first apple product.I have nothing to compare with.

Here's the various iPad model numbers and order numbers. The model numbers are on the back of the iPad
Apple iPad Wi-Fi (Original) 16, 32, 64 GB
The wi-fi only iPad configurations are assigned model number A1219.
MB292LL/A is the order number for the 16 GB configuration. The 32 GB configuration is assigned MB293LL/A and the 64 GB configuration is assigned MB294LL/A.
Apple iPad Wi-Fi/3G/GPS (Original) 16, 32, 64 GB
The Wi-Fi/3G/A-GPS iPad configurations are assigned model number A1337.
MC349LL/A is the order number for the 16 GB configuration. The 32 GB configuration is assigned MC496LL/A and the 64 GB configuration is assigned MC497LL/A.
Apple iPad 2 (Wi-Fi Only) 16, 32, 64 GB
The wi-fi only iPad 2 configurations are assigned model number A1395.
MC769LL/A is the original order number for the 16 GB configuration in black. The 32 GB configuration in black is assigned MC770LL/A and the 64 GB configuration in black is assigned MC916LL/A. The original 16 GB, 32 GB and 64 GB configurations in white are assigned MC979LL/A, MC980LL/A, and MC981LL/A, respectively. On March 7, 2012, Apple discontinued the 32 GB and 64 GB configurations and assigned new order numbers of MC954LL/A and MC989LL/A for the black and white 16 GB configurations, respectively.
Apple iPad 2 (Wi-Fi/GSM/GPS AT&T) 16, 32, 64 GB
The Wi-Fi/GSM/GPS iPad 2 configurations are assigned model number A1396.
MC773LL/A is the original order number for the 16 GB configuration in black. The 32 GB configuration in black is assigned MC774LL/A and the 64 GB configuration in black is assigned MC775LL/A. The original 16 GB, 32 GB and 64 GB configurations in white are assigned MC982LL/A, MC983LL/A, and MC984LL/A, respectively. On March 7, 2012, Apple discontinued the 32 GB and 64 GB configurations and assigned new order numbers of MC957LL/A and MC992LL/A for the black and white 16 GB configurations, respectively.
Apple iPad 2 (Wi-Fi/CDMA/GPS Verizon) 16, 32, 64 GB
The Wi-Fi/CDMA/GPS iPad 2 configurations are assigned model number A1397.
MC755LL/A is the original order number for the 16 GB configuration in black. The 32 GB configuration in black is assigned MC763LL/A and the 64 GB configuration in black is assigned MC764LL/A. The original 16 GB, 32 GB and 64 GB configurations in white are assigned MC985LL/A, MC986LL/A, and MC987LL/A, respectively. On March 7, 2012, Apple discontinued the 32 GB and 64 GB configurations and assigned new order numbers of MC755LL/A and MC985LL/A for the black and white 16 GB configurations, respectively.
Apple iPad 3rd Gen (Wi-Fi Only) 16, 32, 64 GB
The Wi-Fi Only iPad 3 configurations are assigned model number A1416
MC705LL/A refers to the 16 GB configuration in black. The 32 GB and 64 GB configurations in black are MC706LL/A and MC707LL/A, respectively. The 16 GB, 32 GB and 64 GB configurations in white are MD328LL/A, MD329LL/A, and MD330LL/A, respectively.
Apple iPad 3rd Gen (Wi-Fi/4G LTE AT&T/GPS) 16, 32, 64 GB
The Wi-Fi/4G LTE AT&T/GPS iPad 3 configurations are assigned model number A1430
MD366LL/A refers to the 16 GB configuration in black. The 32 GB and 64 GB configurations in black are MD367LL/A and MD368LL/A, respectively. The 16 GB, 32 GB and 64 GB configurations in white are MD369LL/A, MD370LL/A and MD371LL/A, respectively
Apple iPad 3rd Gen (Wi-Fi/4G LTE Verizon/GPS) 16, 32, 64 GB
The Wi-Fi/4G LTE Verizon/GPS iPad 3 configurations are assigned model number A1403
MC733LL/A refers to the 16 GB configuration in black. The 32 GB and 64 GB configurations in black are MC744LL/A and MC756LL/A, respectively. The 16 GB, 32 GB and 64 GB configurations in white are MD363LL/A, MD364LL/A, and MD365LL/A, respectively.
 Cheers, Tom

Similar Messages

How to calculate Sales percentage difference between selected year and its previous year in a Matrix

Hi,
I'm trying to generate a report using matrix like this
Month
Product PreviousYearSalesAmount SelectedYearSalesAmount %SalesDifference
I can populate year sales amount, but i cant calculate the percentage.
Can Anyone help me please.
Note: Month and Year are passed as parameters.
Thank you.

Hi Abhiram,
As per my understanding you can show your fields in matrix.
Only problem is to create the additional column which will have the %SalesDifference value right?
If yes,
Just create one column as shown in below screen,
It will create one column, Name the header of this newly created column as %SalesDifference
In below this header , where you want to show the value for %SalesDifference as
=sum(iif(Fields!year.Value=Parameters!year.Value,(Fields!SalesAmount.Value),-Fields!SalesAmount.Value))/Fields!SalesAmount.Value
Set the property of the column in number as Percentage.
run the report, you will see as below screen.
For your reference I am attaching my RDL code, you can save as .rdl file and run the report (sample Data inside the report only)
<?xml version="1.0" encoding="utf-8"?>
<Report xmlns="http://schemas.microsoft.com/sqlserver/reporting/2008/01/reportdefinition" xmlns:rd="http://schemas.microsoft.com/SQLServer/reporting/reportdesigner">
<Body>
<ReportItems>
<Textbox Name="textbox1">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>Matrix</Value>
<Style>
<FontFamily>Tahoma</FontFamily>
<FontSize>14pt</FontSize>
<FontWeight>Bold</FontWeight>
<Color>SteelBlue</Color>
</Style>
</TextRun>
</TextRuns>
<Style>
<TextAlign>Center</TextAlign>
</Style>
</Paragraph>
</Paragraphs>
<rd:DefaultName>textbox1</rd:DefaultName>
<Height>0.37in</Height>
<Width>5in</Width>
<Style>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
<Tablix Name="Tablix1">
<TablixCorner>
<TablixCornerRows>
<TablixCornerRow>
<TablixCornerCell>
<CellContents>
<Textbox Name="Textbox16">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>Product</Value>
<Style>
<FontWeight>Bold</FontWeight>
</Style>
</TextRun>
</TextRuns>
<Style />
</Paragraph>
</Paragraphs>
<rd:DefaultName>Textbox16</rd:DefaultName>
<Style>
<Border>
<Color>LightGrey</Color>
<Style>Solid</Style>
</Border>
<BackgroundColor>LightBlue</BackgroundColor>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixCornerCell>
</TablixCornerRow>
<TablixCornerRow>
<TablixCornerCell>
<CellContents>
<Textbox Name="Textbox17">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value />
<Style>
<FontWeight>Bold</FontWeight>
</Style>
</TextRun>
</TextRuns>
<Style />
</Paragraph>
</Paragraphs>
<rd:DefaultName>Textbox17</rd:DefaultName>
<Style>
<Border>
<Color>LightGrey</Color>
<Style>Solid</Style>
</Border>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixCornerCell>
</TablixCornerRow>
</TablixCornerRows>
</TablixCorner>
<TablixBody>
<TablixColumns>
<TablixColumn>
<Width>1.79722in</Width>
</TablixColumn>
<TablixColumn>
<Width>1.76722in</Width>
</TablixColumn>
</TablixColumns>
<TablixRows>
<TablixRow>
<Height>0.25in</Height>
<TablixCells>
<TablixCell>
<CellContents>
<Textbox Name="SalesAmount">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>=Sum(Fields!SalesAmount.Value)</Value>
<Style />
</TextRun>
</TextRuns>
<Style />
</Paragraph>
</Paragraphs>
<rd:DefaultName>SalesAmount</rd:DefaultName>
<Style>
<Border>
<Color>LightGrey</Color>
<Style>Solid</Style>
</Border>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixCell>
<TablixCell>
<CellContents>
<Textbox Name="Textbox76">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>=sum(iif(Fields!year.Value=Parameters!year.Value,(Fields!SalesAmount.Value),-Fields!SalesAmount.Value))/Fields!SalesAmount.Value</Value>
<Style>
<Format>0.00%</Format>
</Style>
</TextRun>
</TextRuns>
<Style />
</Paragraph>
</Paragraphs>
<rd:DefaultName>Textbox76</rd:DefaultName>
<Style>
<Border>
<Color>LightGrey</Color>
<Style>Solid</Style>
</Border>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixCell>
</TablixCells>
</TablixRow>
</TablixRows>
</TablixBody>
<TablixColumnHierarchy>
<TablixMembers>
<TablixMember>
<Group Name="month">
<GroupExpressions>
<GroupExpression>=Fields!month.Value</GroupExpression>
</GroupExpressions>
</Group>
<SortExpressions>
<SortExpression>
<Value>=Fields!month.Value</Value>
</SortExpression>
</SortExpressions>
<TablixHeader>
<Size>0.25in</Size>
<CellContents>
<Textbox Name="month1">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>=MonthName(Fields!month.Value)</Value>
<Style>
<FontWeight>Bold</FontWeight>
</Style>
</TextRun>
</TextRuns>
<Style>
<TextAlign>Center</TextAlign>
</Style>
</Paragraph>
</Paragraphs>
<rd:DefaultName>month1</rd:DefaultName>
<Style>
<Border>
<Color>LightGrey</Color>
<Style>Solid</Style>
</Border>
<BackgroundColor>LightBlue</BackgroundColor>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixHeader>
<TablixMembers>
<TablixMember>
<Group Name="year">
<GroupExpressions>
<GroupExpression>=Fields!year.Value</GroupExpression>
</GroupExpressions>
</Group>
<SortExpressions>
<SortExpression>
<Value>=Fields!year.Value</Value>
</SortExpression>
</SortExpressions>
<TablixHeader>
<Size>0.25in</Size>
<CellContents>
<Textbox Name="year">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>=Fields!year.Value</Value>
<Style>
<FontWeight>Bold</FontWeight>
</Style>
</TextRun>
</TextRuns>
<Style>
<TextAlign>Center</TextAlign>
</Style>
</Paragraph>
</Paragraphs>
<rd:DefaultName>year</rd:DefaultName>
<Style>
<Border>
<Color>LightGrey</Color>
<Style>Solid</Style>
</Border>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixHeader>
<TablixMembers>
<TablixMember />
</TablixMembers>
</TablixMember>
</TablixMembers>
</TablixMember>
<TablixMember>
<TablixHeader>
<Size>0.25in</Size>
<CellContents>
<Textbox Name="Textbox61">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>%SalesDifference</Value>
<Style>
<FontStyle>Normal</FontStyle>
<FontWeight>Bold</FontWeight>
<TextDecoration>None</TextDecoration>
<Color>#000000</Color>
</Style>
</TextRun>
</TextRuns>
<Style>
<TextAlign>Center</TextAlign>
</Style>
</Paragraph>
</Paragraphs>
<rd:DefaultName>Textbox61</rd:DefaultName>
<Style>
<Border>
<Color>LightGrey</Color>
<Style>Solid</Style>
</Border>
<BackgroundColor>LightBlue</BackgroundColor>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixHeader>
<TablixMembers>
<TablixMember>
<TablixHeader>
<Size>0.25in</Size>
<CellContents>
<Textbox Name="Textbox62">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value />
<Style>
<FontWeight>Bold</FontWeight>
</Style>
</TextRun>
</TextRuns>
<Style />
</Paragraph>
</Paragraphs>
<rd:DefaultName>Textbox62</rd:DefaultName>
<Style>
<Border>
<Color>LightGrey</Color>
<Style>Solid</Style>
</Border>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixHeader>
</TablixMember>
</TablixMembers>
</TablixMember>
</TablixMembers>
</TablixColumnHierarchy>
<TablixRowHierarchy>
<TablixMembers>
<TablixMember>
<Group Name="Product">
<GroupExpressions>
<GroupExpression>=Fields!Product.Value</GroupExpression>
</GroupExpressions>
</Group>
<SortExpressions>
<SortExpression>
<Value>=Fields!Product.Value</Value>
</SortExpression>
</SortExpressions>
<TablixHeader>
<Size>1.38889in</Size>
<CellContents>
<Textbox Name="Product1">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>=Fields!Product.Value</Value>
<Style />
</TextRun>
</TextRuns>
<Style />
</Paragraph>
</Paragraphs>
<rd:DefaultName>Product1</rd:DefaultName>
<Style>
<Border>
<Color>LightGrey</Color>
<Style>Solid</Style>
</Border>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixHeader>
</TablixMember>
</TablixMembers>
</TablixRowHierarchy>
<DataSetName>DataSet1</DataSetName>
<Top>0.38in</Top>
<Left>0.04667in</Left>
<Height>0.75in</Height>
<Width>4.95333in</Width>
<ZIndex>1</ZIndex>
<Style>
<Border>
<Style>None</Style>
</Border>
</Style>
</Tablix>
</ReportItems>
<Height>1.20167in</Height>
<Style />
</Body>
<Width>5.1in</Width>
<Page>
<LeftMargin>1in</LeftMargin>
<RightMargin>1in</RightMargin>
<TopMargin>1in</TopMargin>
<BottomMargin>1in</BottomMargin>
<Style />
</Page>
<AutoRefresh>0</AutoRefresh>
<DataSources>
<DataSource Name="DataSource1">
<DataSourceReference>DataSource1</DataSourceReference>
<rd:SecurityType>None</rd:SecurityType>
<rd:DataSourceID>501ee6de-61fb-416f-9a92-011661d01cba</rd:DataSourceID>
</DataSource>
</DataSources>
<DataSets>
<DataSet Name="DataSet1">
<Query>
<DataSourceName>DataSource1</DataSourceName>
<QueryParameters>
<QueryParameter Name="@year">
<Value>=Parameters!year.Value</Value>
</QueryParameter>
<QueryParameter Name="@Month">
<Value>=Parameters!Month.Value</Value>
</QueryParameter>
</QueryParameters>
<CommandText>select * from
select 'apple' Product ,1 month ,2014 year,2000 SalesAmount
union
select 'apple' Product ,1 month,2015 year,3000 SalesAmount
union
select 'dell' Product ,1 month,2014 year,3000 SalesAmount
union
select 'dell' Product ,1 month,2015 year,2500 SalesAmount
union
select 'apple' Product ,2 month,2014 year,1500 SalesAmount
union
select 'apple' Product ,2 month,2015 year,3000 SalesAmount
union
select 'dell' Product ,2 month,2014 year,3000 SalesAmount
union
select 'dell' Product ,2 month,2015 year,5500 SalesAmount
)t
where year between @year-1 and @year
and Month=@Month</CommandText>
<rd:UseGenericDesigner>true</rd:UseGenericDesigner>
</Query>
<Fields>
<Field Name="Product">
<DataField>Product</DataField>
<rd:TypeName>System.String</rd:TypeName>
</Field>
<Field Name="month">
<DataField>month</DataField>
<rd:TypeName>System.Int32</rd:TypeName>
</Field>
<Field Name="year">
<DataField>year</DataField>
<rd:TypeName>System.Int32</rd:TypeName>
</Field>
<Field Name="SalesAmount">
<DataField>SalesAmount</DataField>
<rd:TypeName>System.Int32</rd:TypeName>
</Field>
</Fields>
</DataSet>
</DataSets>
<ReportParameters>
<ReportParameter Name="year">
<DataType>String</DataType>
<DefaultValue>
<Values>
<Value>2015</Value>
</Values>
</DefaultValue>
<Prompt>year</Prompt>
</ReportParameter>
<ReportParameter Name="Month">
<DataType>String</DataType>
<DefaultValue>
<Values>
<Value>1</Value>
</Values>
</DefaultValue>
<Prompt>Month</Prompt>
</ReportParameter>
</ReportParameters>
<Language>en-US</Language>
<ConsumeContainerWhitespace>true</ConsumeContainerWhitespace>
<rd:ReportUnitType>Inch</rd:ReportUnitType>
<rd:ReportID>ee1a8383-6595-42b1-94f2-c68d681c85d3</rd:ReportID>
</Report>
Thanks
Prasad
Mark this as Answer if it helps you to proceed on further.

Difference between str="Hai"; and str = new String("Hai");

HI,
String szFirst = "Hello World":
String szSecond = new String("Hello World");What is the difference between the two types of string initialization?

RajivGuna wrote:
HI,
String szFirst = "Hello World":
String szSecond = new String("Hello World");What is the difference between the two types of string initialization?What do you think the difference is?

Difference between "Times" font and "Times New Roman"

I see these fonts right next to each other, and I am wondering if there are any differences.

I see these fonts right next to each other, and I am wondering if there are any differences.
Ah, the history of type wars in the twentieth century.
In the nineteen-twenties when Stanley Morison became typographic consultant to Monotype Corporation, newspapers were still printed with nineteenth century types where the verticals are thick and the horisontals are very, very thin in emulation of copper plate printing.
Morison famously fought The Times over the legibility of its printing type, and was invited to design and develop a different form of printing type that would stand up to production with flatbed assembly, stereotyping (10% condensing after cooling) onto curved half-cylinders, and high speed presswork with thin inks and thin unmoistened and uncoated paper.
Morison looked to the printing types of the seventeenth and eighteenth century. With these types one can make an optical trick, because the bown (the counter) is asymmetric and the stress is diagonal and not vertical. This makes the type look broad, even if in fact it is condensed, a trick Matthew Carter later used at Linotype to develop Olympian as replacement for Corona.
Morison had Victor Lardent at the drawing department of The Times prepare the large scale masters, differently dimensioned for different printing sizes. From these masters, electro-mechanical pantographic routers in turn made the metal manufacturing masters for machine casting and machine composition with Monotype systems.
The Times was composed in two machine composition systems at the same time, Monotype for titling and Linotype for body copy. Therefore, the new printing type was also manufactured for Linotype composition, that is, for solid line slug casting in addition to single letter sort casting for Monotype composition.
During World War II, the Monotype works at Salfords in Surrey manufactured machine gun parts in addition to composing machine parts. Meanwhile, in the United States, the Mergenthaler Linotype company applied for a patent on the Times printing type and was granted the United States patent in the North American market.
Linotype and Monotype first converted to photo-mechanical composition in the nineteen-sixties and then to electro-photographic composition in the first half of the nineteen-seventies and to electronic composition for laser imagesetting with early page description languages and raster image processors in the second half of the nineteen-seventies.
In this process, the paper masters for metal casting machines were modified in the process of making masters for the new media. Linotype Times was modified for electro-photographic reproduction by Walter Tracy of the Linotype office in London. Walter Tracy's work became the source of the Linotype Times licenced for the Apple LaserWriter in late 1984.
Linotype had licenced Dr Peter Karow's type production tool, Ikarus, which was the first to implement type as outlines to be populated with picture elements by the raster image processor instead type as patterns of picture elements painted by the type production team in advance of rasterisation. Dr Karow's outline technology was then converted to Dr Warnock's outline technology for PostScript.
The first conversion to PostScript suffered from shortcomings, and was subsequently redone. Linotype in the first half of the nineteen-eighties was selling Linotronic imagesetters into the rapidly rising market for PostScript offset printing, with the Linotype Adobe Type 1 Library as the preferred type library for the new production platform.
Monotype entered into a licence agreement with Adobe in late 1988, and in 1989 the bottom went out of the type market when Apple and Microsoft announced the TrueType Alliance with the promise of publishing a free TrueType Specification, Adobe announced that that the Adobe Type 1 specification would be published, Sun Microsystems acquired Folio and announced that the Sun F3 font format would be available, and Agfa acquired Compugraphic after which Agfa-Compugraphic contracted with Hewlett-Packard to provide the Agfa-Compugraphic Intellifont technology for the Hewlett-Packard Printer Control Language page description language.
Apple developed TrueType 1 with Linotype Times and Linotype Helvetica as models for gridfitting the same as Linotype Times and Linotype Helvetica had been developed as models for Adobe Type 1 gridfitting. Microsoft did not have the rights to Linotype Times and Linotype Helvetic, so Microsoft approached Monotype for comparable core fonts. Monotype then developed Times (New) Roman for TrueType, and a close match for Linotype Helvetica, Monotype Arial (named after the spirit in Shakespeare's The Tempest?).
Linotype Times, Monotype Times New Roman, Linotype Helvetica, and Monotype Arial are the four type faces that have attracted most engineering attention in the development of technologies to automatically fit an outline to a raster grid.
/hh

Difference between importing files and adding files/folders to liabrary?

When I want to bring in new music into my liabrary from my my music folder, I don't know the difference between importing them and adding a file. They both seem to bring up the my music folder and seem to give me the same options?

To quote from the following link:
"When you add something to the library, essentially you are taking existing audio or movie files and adding an entry for each to your iTunes Library index. iTunes adds entries in your iTunes library for the selected files, and copies the files to your iTunes Music folder (if you have that option selected in the Advanced pane of iTunes preferences)."
"The Import menu item allows you to import playlists and other data files into iTunes."
For more see this page: About the Add to Library, Import and Convert functions

What is the difference between access specifiers and access modifiers?

what is the difference between access specifiers and access modifiers? are they same? if not what is the difference.

Access Specifier are used to specifiy how the member variable ,methods or class to other classes.They are public ,private and protected.
Access Modifier:
1.Access
2.Non Access
Access:
public ,private,protected and default.
Non Access:
abstract,final,native,static,synchronized,transient,volatile and strictfp

What are the major differences between UCCX v7 and v8.0.2

Does anyone know of a matrix or document which shows the major differences between UCCX v7 and v8.0.2?
I have looked high and low, even searched this forum, but have not found anything.
I've even looked at release notes in 8.0.2 but couldn't see anywhere that states the changes.
Any help appreciated.

Hi,
I have awarded you both with the 'correct answer'.
I went through, painstakingly, the documents I was linked to above and compared.
In the end the major differences are pretty much what you have outlined here - which is exactly what I wanted.
Thank you both very much.
Cheers,
Brett
PS: Here are the obvious differences I found going thru the documentation I was linked to... (pretty much what you said)
Feature
V7
V8
High   Availability over the WAN (HAoWAN)
No
Yes
Available in   an Appliance Model
No
Yes
Read-only access to Cisco Unified Contact Center Express   database (Informix) with JDBC, ODBC, or Structured Query Language (SQL)
No
Yes
System   Software Configuration
MS Windows Server   2003
Cisco Media   Convergence Appliance Software
System   Software Configuration (client)
XP and Vista
XP, Vista, and Win7
System   Software Configuration (browser based client software)
No
CAD and Workforce   Management
System   Software Configuration (Web 2.0 based client software)
No
QM and AQM
Operating   System
Cisco OEM Windows   Server 2003
Cisco Voice OS

What is the difference between Instance variable and Global variable?

Hi folks,
Could you please explain me, "what is the difference between Instance variable and Global variable?"
Are they really same or not?
--Subbu

Hi flounder,
I too know that there is no such a term GLOBAL in java.
generally people use to say a variable which is accessible throught out the class or file has global access
and that will be called as a global variable...
my point is very much similar to what Looce said.
In simple that is not a technical term, but just a causual term.
In technically my question is, "What is the difference between a instance variable and public variable?".
Hi looce,
Thanks for the reply. even thats what my understanding too....in order to confirm that i raised this question..
Your reply has given a clear answer...... thanks again.
--Subbu

What is the difference between Data Warehousing and Big Data?

What is the difference between Big Data and
Data Warehousing? are they the same? similar? if no, then when to use each of them?
Any link to a paper that describes the difference?!

Big Data is a term applied to data sets whose size is beyond the ability of commonly used tools to capture, manage and process the data within a tolerable elapsed time. But Data-warehouse is a collection of data marts representing historical data from different
operations in the company.
It means Big Data is collection of large data in a particular manner but Data-warehouse collect data from different department of a organization. However Data-warehouse require efficient managing technique. Conceptually these are same only at one factor that
they collect large amount of information
For Big Data - You can start researching on HDInsight and for Datawarehouse check MSBI
Sandip Pani http://SQLCommitted.com

What's difference between JPanel.remove(); and JPanel = null

nice day,
how can remove JPanel (including its JComponents), safe way, can you explain the difference between JPanel.remove () and JPanel = null,
1/ because if JPanel does not contain any static JComponents
2/ or any reference to static objects,
then works as well as JPanel.remove or JPanel = null,
or what and why preferred to avoid some action (to avoid to remove or to avoid to null)

mKorbel wrote:
nice day,
how can remove JPanel (including its JComponents), safe way, can you explain the difference between JPanel.remove () and JPanel = null, Remove the JPanel from the container it was part of and make sure you do not keep any references to it from your own classes. Don't make it any more difficult than it has to be.

Difference between Component Controller and Custom Controllet...?

Hi
Can any one tell me Difference between Component Controller and Custom Controllet...?
Best Regards
Ravi Shankar B

Hi RaviShankar B,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/web%20dynpro%20sample%20applications%20and%20tutorials.htm
Also refer to the below link
Component and custom controllers
Component Controller:-
For each component of yours there will be a component controller, were in you can define context variables and methods, events etc.. This usefull while using models.
Simple example where we can see this is, when you create global context variable in this controller and map this variable to the view controller context variable of different view, which enables you to pass the value of the variable from one view to another.
Custom Controller:-
They also have the same the function but as the name suggest there function can be customised. That is we can have more than one custom controller for a component. This is usefull when we need to create seperate execute methods for inputs from model import( Both webservice and rfc call).So you can seperate each other. Example is there in the more sample codes and application section.
regards
Anil Dichpally

Difference between co-product and By-product

Hi,
Can anyone tell me Difference between co-product and By-product with example?
What is their impact on costing?

Hi,
By-Product : By-Product is a Product Created While Making Production
1. The System Does not create a separate order item for each by-Product
2. The Material Valuation of a by-Product is always based on the price, specified by the price control in the material master
3. The by-product must be listed as an item in the bill of material of the main product .The bill of material item must have a negative quantity (for example 1 -)
4. Byproduct has only the -ve quantity in BOM component, it does not go for joint production costing.
5. Movement type 531 to post the By-Product during Confirmation.
6. Settlement of cost is done to the header of the material
Co-Product :A co-product is a product that is produced in conjunction with other products. The system creates a separate order item in the production order for each co-product. As a result, it is possible to display actual costs at co-product
Settings: 1.) You have to activate check box in MRP2 view for co product.
2.) For co products we also need to define the apportionate structure with equivalence number for costing purpose, this will be done in "Joint Production" details in the same view. (30:30:20:20)
Prerequisite for the main product:
1.) The indicator Co-product must be activated in the material master of the main product (MRP area)
Prerequisites for a co-product:
1.) The indicator Co-product must be activated in the material master of the co-product (MRP area)
The co-product must be listed as an item in the bill of material of the main product
2.) On the Basic data tab page of the BOM item, the indicator Co-product must be activated in the field group General data
Regards
Sunil Kumar

Difference between service pack and support pack

Hi,
what is the exact difference between service pack and support pack. Are they same?
The version details presnt in integration builder -> help-> inforamtion of my XI server are as follows :
Service pack: 09
Release: 645_VAL_REL
does it mean that the both support package and service package for my XI server are 09?
thanks in adavance
regards
Jagruthi

1. A service pack (in short SP) is a collection of updates, fixes and/or enhancements to a software program delivered in the form of a single installable package. Service packs are usually numbered, and thus shortly referred to as SP1, SP2, etc. It is notable that they may bring, besides bug fixes, entirely new features.
http://help.sap.com/saphelp_nw04/helpdata/en/57/a21f407b402402e10000000a1550b0/frameset.htm
Service packs in 2004 and 2004s;
in 2004 - in 2004s
SP12 & < - SP04 http://XI 3.0
SP13 + 14 - SP05 http://PI 7.0
SP15 - SP06
SP16 - SP07
SP17 - SP08
SP18 - SP09 and so on...
2) Support pack -
http://help.sap.com/saphelp_nw04s/helpdata/en/9e/5bc53f3e0f0228e10000000a114084/frameset.htm
For the ABAP parts of usage type PI, this is the implementation of support packages. For the Java parts, the deployment with the Java Support Package Manager (JSPM) is used.
You can find currently available support packages on SAP Service Marketplace at service.sap.com/sp-stacks.
A description of how to apply support packages is available in SAP Note 879289.

Difference between Internal HU and External HU

Hi guys,
I am quite new to WM, can you please tell me Difference between Internal HU and External HU

The HU information is stored in table VEKP (header) and VEPO (item). In the header table you can find Internal HU No (VENUM). This is the internal SAP number automatically assigned as the table key each time you create an HU. However, the HU aslo has an external number (EXIDV) which is the number of the HU that is used when marking the HU. This number allows for a longer ID than the internal number if you want to use.
Here is the documentation for EXIDV.
Short Text
External Handling Unit Identification
Definition
Specifies an external identifier for the handling unit.
Use
The system automatically generates an internal number that must be unique for each system client. The system also needs external identification so that it can uniquely identify handling units.
1. Creating a handling unit:
Identifiers for handling units are determined during creation according to settings in Customizing for number assignment of the packaging material type for the packaging material that is being used. You can also assign default values for identifiers when you create handling units, although these values must correspond to the settings in Customizing.
2. Processing a handling unit
To edit existing handling units, enter the handling unit's identification in this field.
Rgds
Richard

Difference between Ace Director and Ace Memeber

What is the Difference between Ace Director and Ace Member?
because recently I saw one Ace director becoming Ace Member... (John)

You have not read the link I provided, have you ?
Ace director are not more senior than Ace member, they have more things to commit to like "Ability to commit to participation in an honorary (noncompensated) capacity for 12 months"...
So, I cannot tell for John, but if one cannot commit within those things, you cannot be Ace director... and it is not "depromoted", probably have less time for this.
Nicolas.

How do I tell the difference between iPad 2 and the New iPad because they both look the same?

Similar Messages

Maybe you are looking for