How do I tell what radio frequency and speed (AGN) my WRT610N router is operating on ?

with each of my laptops, and how do you change this ?

If i am not wrrong, you need to change the Wireless Settings of your Router? That you can do it by simly logging in to your Router setup page. That you can do it by Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 Leave username blank & in password use admin in lower case...Then Click on the Wireless Tab and there you can Set the RadioBand and Channel as per your Need.

Similar Messages

  • How can I tell what video card and how much video memory does my iMac have?

    How or where can I find out: which video card does my iMac have and how much video memory does it have? I've tried looking in System profiler, but I did not see it there. Thank you.

    Once you open System Profiler there should be a line called "memory" which is the RAM (vs. hard drive size which is not what is called memory), e.g., Memory: 1.5 GB
    For video click on the line Graphics/Displays and look at the chipset line, e.g., Chipset Model: GeForce2 TwinView
    Kappy's instructions are handy for checking the original configuration of your computer, but that may have been changed at some time, especially if you bought it secondhand.

  • I have several CC subscriptions and want to cancel one.  How do I tell what subscription is attached to what computer?

    I have several CC subscriptions and want to cancel one.  How do I tell what subscription is attached to what computer?  I can't find any place to match up a serial number or any kind of ID.

    Hi Okvideodude,
    Welcome to Adobe Forums
    You can Contact Adobe Customer Support and provide your email address for the one you want to cancel. In order to do so see the link mentioned below.
    http://www.adobe.com/support/download-install/supportinfo/
    Let us know if that helps!
    Thanks
    Garima   

  • HT3775 My DVD player is supposed to play avi videos, but it often doesn't telling me that the file format is not recognized.  I suspect it's because it's the wrong codec.  How can I tell what the codec is before I burn a DVD?  And how do I get a workable

    My DVD player is supposed to play avi videos, but it often doesn't telling me that the file format is not recognized.  I suspect it's because it's the wrong codec.  How can I tell what the codec is before I burn a DVD?  And how do I get a workable codec?  Thanks for uour help!
    Ken Selvidge ([email protected])

    I am not a computer savy person.  I just need to plug in and have the machine do what it should do.
    Not a problem, but that indicates you have a lot to learn.
    File extensions like mpeg, mp4., avi, wmv, etc. are just wrappers. It is like a box the audio or video content is placed inside. The audio and video content must be encoded with a codec before it is placed in the box. There are thousands of codecs. Not all are installed on your Mac. You must have the same codec installed that encoded the video in order to play it. So, while Quicktime does support mpeg wrapper, it may not have the codecs to decode the internal video.
    Some programs have lots of the codecs available to them, like VLC, Niceplayer, MPlayerX, etc.
    You can also get "plug-ins" for Quicktime that add codecs to Quicktime, like Perian. Although it is no longer being developed, Perian still works well.
    Why is it so difficult? Probably because they are always working on ways to compress the video to get better playback.

  • Own a second hand ipod classic,how can i tell what generation it is if back is scratched and hard drive busted?

    own a second hand ipod classic,how can i tell what generation it is if back is scratched and hard drive busted?

    See here: Identifying iPod models
    Or type in the iPod's serial # here: https://selfsolve.apple.com/agreementWarrantyDynamic.do
    B-rock

  • How do I tell what version (update / release level) of version 6 has been applied to my system?

    Question
    How do I tell what version (update / release level) of version 6 has been applied to my system? I have applied several different release levels to version 6 of FF but all the about feature tells me is Version 6.0. no version! This seems to be a change in the way updates are handled. Is that a bending because of the speed of which you're pushing out updates and new releases?
    contact me if you need something more
    ''deleted email address''

    @cchur <br />
    Nope, I never used Chrome, but I did try Chromium on my Windows desktop PC for a few months last year. I got tired of the Google updater. exe running all the time and Google's method of doing updates, so it's gone. I do have Chromium on my Linux EeePC since last summer, but Ubuntu handles all updates and gives the user the capability to accept or deny, any or all updates - much more to my liking, similar to the way Mozilla does it. I don't like software developers forcing to update until I am ready to proceed.
    There's a lot more about this new Fast Release system, than just the lack of visible version numbers, that I don't like. The Nightly, Aurora, Beta, & Release sequence is dumb with the way it changes the version numbers. I prefer installing (for instance) what will become version 7 and have that installation progress thru the 4 stages, instead. Now it's like Nightly going from 7 to 8, Aurora going from 6 to 7, and Beta doing - hell, I won't know if it becomes a Release or if it just dies and I will have to install the Release version myself. ''Quite honestly I don't care, because I don't think this new "system" is going to last too long without major modifications. Too damn many users are so pissed off, that when Firefox starts losing large numbers of users, Chrome keeps growing and eventually passes Firefox in number of users and market share of usage - Mozilla will wake up and see the "light" and change back to the way things used to be done, to a certain extent.''
    I also dislike the UI changes in 4/5/6/7 enough that I am still using Firefox 3.6 for almost everything and Firefox 2.0.0.20 for the rest. I have been setting my toolbars up almost like Mozilla did for Firefox 4, since Firefox '''0.7''' in 2003 and I haven't come up with a workable combination of mods and extensions to configure Firefox to look and work the way I have been doing for almost 8 years now.

  • HT1338 how do i tell what my operating system is?

    how do i tell what my operating system is?

    Click on the Apple at the upper left and choose About This Mac. Your version of OS X will be shown.

  • How can I tell what the iTunes build is before I download?

    I am having difficulty finding out what the iTunes build is for the current download from the Apple site. I am running iTunes 7.6 (29); I assume the "29" is the build for my installed version. I also assume that Software Update will ignore build changes unless the version changes.
    I do not want to download and install the current iTunes build unless it is different from my currently installled app. How can you tell what the specific version and build are from the Apple download site?
    Thanks!

    I am running iTunes on Leopard.

  • How can I tell what app makes up the "usage"?

    Under General Settings, you have the option to view usage. How can I tell what app is using that "usage"? It is not data, just time active.

    Go to the AppleStore and download BatteryDoctor.
    This will help you to see which apps take a lott of your battery level.

  • How do i tell what version of Microsoft Office am i using on my mac

    how do i tell what version of Microsoft Office am i using on my mac

    You can open any piece in Office, such as Word, click on About Word, and it will say Office 2011 (or whatever) for Mac.

  • How do I tell what version of Foxfire I have? Why am I not able to log in to the NC Tracks Login?

    I have been told by NC Medicaid NC Tracks/Liberty that they only support Firefox 10. This is the program where all transactions and processes are conducted. How do I tell what version I have?
    I have also tried to log in to NC Track with Firefox, but I get a screen that states I cant access the site?

    Hello,
    At the top of the Firefox window, click the '''Help menu''' and select '''About Firefox.''' You will get a window like the one in image below.
    For Installing older version of Firefox Go through [https://support.mozilla.org/en-US/kb/install-older-version-of-firefox?esab=a&s=checking+version+of+firefox&r=1&as=s Install an older version of Firefox] .
    Please let us know if it solved your problem or not.
    Thank You.

  • How do you tell what week your computer was manufactured?

    How can I tell what week my computer was manufactured? My serial number is [..snipped...]. Week 19 translates to what month?
    Thank you

    Someone, somewhere could theoretically, trace your serial number to your name, address and maybe even how you paid for your computer. I recently had my identity cloned in Mexico. I wouldn’t think of posting any unnecessary information on any website. But that’s just me.

  • How can I tell what microprocessor my computer has

    How can I tell what microprocessor and operating system I have on my Mac? Also wheter it is 32 or 64 bit? How much RAM? I want to purchase software, but not if it won't work.

    Apple>About This Mac>More Info

  • TES 6.1.x - how do you tell what DB is used by ClientMgr?

    We just externalized the Client Mgr DB to Oracle, updated config files, etc. How do you tell what db is using - Derby or Oracle?        

    After you externalize the CM database, you should see the db objects (tables and views) in the database are now created shortly after you start the CM service.
    You can verify creation of database objects in the actual database and in the plugin log upon start-up. This log can be found  under the ../ClientManager/plugin/tes-6.0/log directory
    John

  • How can you tell what pictures from iPhoto you already used in iMovie?

    how can you tell what pictures from iPhoto you already used in iMovie?

    Log into your account on a computer (iTunes>Store>View Account) and go to Purchase History

Maybe you are looking for

  • Itunes closes when I try to sync my ipod touch4g!

    Problem signature: Problem Event Name: BEX Application Name: iTunes.exe Application Version: 10.1.2.17 Application Timestamp: 4d3f51b8 Fault Module Name: StackHash_fd00 Fault Module Version: 0.0.0.0 Fault Module Timestamp: 00000000 Exception Offset:

  • Credit  - use current convertion rate (possible?)

    Good Morning all!! I need help with something regarding sales credit value. There are situations where the customer has a credit limit configured in one currency (lets say dollar) and has it´s sales invoices in another (lets say euro). If I create an

  • Iphone Restore Help Please

    I had to do a restore from backup on my iphone today because an app just totally messed up the phone. I restored from back up successfully i think all my info was back on the phone. The only problem is that now, since this is the first time that this

  • Can't connect but can ping & use AP Util

    A couple issues: TC shows up in finder, can ping it (static ip, as are all my ip's) and use the airport utility. It worked fine for a day or so, now with no changes, this is where I'm at. I get an error about it not existing. I've tried to 'connect A

  • Artists names duplicated in iTunes Library

    I'm still using iTunes 6.5 on my system. I haven't upgraded yet and I don't know if I'll do. However, I have a question. Why do I have multiple listings for the same artist if only the album (CD) or source changes. For example, I may have three (3) l