How do I tell what speed (wireless) the ATV is connected to my router at?

Just swapped one 'n' router for another (Netgear DG834N for DGN2000) and am finding that syncing media between iMac and ATV is suddenly taking 10x as long so wondering if my ATV is connected at full speed. I've confirmed that the iMac is connected to the router @ 130Mbps - should that be 270Mbps for 'n'?
...devices are all very close to router for testing purposes and signal strength is excellent.
Cheers,
Adam

The tv should operate at the fastest network speed available.
130 Mbps is what I would expect from a base station that is transmitting at 2.4 Ghz 802.11n with 802.11b/g compatibility.
If you have changed a 802.11g router to a 802.11n, then you may or may not see improved performance depending on your connection between the base station and the mac/pc, but if your performance is worse you may want to examine the router settings.

Similar Messages

Upgraded to IO6, seems like the amount of system memory to run is higher, this causes issues with some Apps. I can't get SIRI to work because the amount of free system memory is not enough. how can I tell what is eating the system memory?

Upgraded to IO6, seems like the amount of system memory to run is higher, this causes issues with some Apps. I can't get SIRI to work because the amount of free system memory is not enough. how can I tell what is eating the system memory?

Upgraded to IO6, seems like the amount of system memory to run is higher, this causes issues with some Apps. I can't get SIRI to work because the amount of free system memory is not enough. how can I tell what is eating the system memory?

How do I tell what is in the Other category of storage?

My phone shows its almost full, but the biggest catogry of storage is the "other" at 6.9g. How do I see what makes that up?

"Other" normally incudes the iOS, app data, messages and email. It normally is not much over 1 GB, often less. Unless you have a massive number of messages on your phone, there is corrupted data appearing as "other."
To get rid of it, restore the iOS using iTunes. You can try also restoring a backup, but the backup may contain the corrupted data and it will reappear on the phone. In that case, you'll have to restore as new.
iTunes: Restoring iOS software

I'm up to 55 gb on my 60 gb HD--how can I tell what's hogging the space?

I have 10,000 pics on iphoto, which I thought was the culprit, but after backing that up to an external, that only is 12 gb. I need to free up more space to load iphoto6 and do some movies.
What's the best way to find out exactly what is using up space? And what are the common culprits?
thanks!

You can use WhatSize to find out where the space on your hard disk is going; don't delete anything without getting further advice. Possible causes include:
1. One application or process writing a large number of entries to a log file.
2. An application trying to write large amounts of data to a disk which isn't connected to the machine.
3. Large numbers of swapfiles appearing in the /private/var/vm/ folder.
(13481)

How can I tell what table(s) have the most transactions against them

Hello, in Oracle 11.2.0.3, RHEL 6 x86-64, how can I tell what tables have the highest transaction activity?
Picked "Objects" because I could not find a space related to performance tuning
Humbly,

What version of Oracle are you running (standard or enterprise)?
Easist system is to run an AWR or statspack report. If you run either of these you will see sections on segments (so segments by logical reads, physical reads) which is easily digestible.
v$segment_statistics will also give you a breakdown on segment access.

How can I tell what the iTunes build is before I download?

I am having difficulty finding out what the iTunes build is for the current download from the Apple site. I am running iTunes 7.6 (29); I assume the "29" is the build for my installed version. I also assume that Software Update will ignore build changes unless the version changes.
I do not want to download and install the current iTunes build unless it is different from my currently installled app. How can you tell what the specific version and build are from the Apple download site?
Thanks!

I am running iTunes on Leopard.

How can I tell what app makes up the "usage"?

Under General Settings, you have the option to view usage. How can I tell what app is using that "usage"? It is not data, just time active.

Go to the AppleStore and download BatteryDoctor.
This will help you to see which apps take a lott of your battery level.

How do I tell what version of Foxfire I have? Why am I not able to log in to the NC Tracks Login?

I have been told by NC Medicaid NC Tracks/Liberty that they only support Firefox 10. This is the program where all transactions and processes are conducted. How do I tell what version I have?
I have also tried to log in to NC Track with Firefox, but I get a screen that states I cant access the site?

Hello,
At the top of the Firefox window, click the '''Help menu''' and select '''About Firefox.''' You will get a window like the one in image below.
For Installing older version of Firefox Go through [https://support.mozilla.org/en-US/kb/install-older-version-of-firefox?esab=a&s=checking+version+of+firefox&r=1&as=s Install an older version of Firefox] .
Please let us know if it solved your problem or not.
Thank You.

How can you tell what type of Iphone I have from the model number or serial number from the settings menu

how can you tell what type of Iphone I have from the model number or serial number from the settings menu?

Type Serial Number from Settings App here https://selfsolve.apple.com/agreementWarrantyDynamic.do it will tell you the type of iPhone.

PAL or NSTC, how can i tell what format the vid clip is?

The 2nd abbreviation might be wrong...
concerning vid clips
How can you tell what format clips are in before iMovie tells you?
I don't want to combine the formats and cannot figure a way to tell the difference before trying to burn the dvd

At the top of the iMovie project window it will tell you by giving the name you gave to the project as well as 'DV NTSC, or DV NTSC Widescreen.
Somewhat confusingly, when you set your choice of NTSC or PAL in iMovie's preferences when starting a new project (you can't switch later), these are only identified as 29.95 fps (which is NTSC) and 25 fps (which is PAL). Once you have set that, all iMovie projects you start will default to the same until you change it. You cannot combine the formats in the same project.
As you are in the USA yours will probably default to NTSC which is the TV system you use there. In Europe we set it to PAL which is what we use here.
A bit rudely, we also say that NTSC stands for 'Never The Same Colour Twice'!
PAL used to stand for 'Prolongs Active Life', but that was actually the tag-line in a dog food commercial! But they are useful mnemonics to remember them by!

I just got an IPAD2 on Saturday. With the Mac, I could always tell when programs were open/running by going to the menu bar. How can I tell what programs are running in the background. I am struggling with not being able to go to a menu bar at the top

I just got an IPAD2 on Saturday. With the Mac, I could always tell when programs were open/running by going to the menu bar. How can I tell what programs are running in the background. I am struggling with not being able to go to a menu bar at the top

You can see which apps are open and/or recently used by double-clicking the home button to bring up the taskbar at the bottom of the screen (not all apps that appear there are active) - you can then close apps on it by pressing and holding one of them for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar. If you have an app 'open' on-screen then it won't appear on the taskbar, you will need to go back to the homescreen first, and it should then show when you next open the taskbar.
If you haven't already got a copy then you can download the iPad manual from here : http://support.apple.com/manuals/#ipad

HT3775 My DVD player is supposed to play avi videos, but it often doesn't telling me that the file format is not recognized. I suspect it's because it's the wrong codec. How can I tell what the codec is before I burn a DVD? And how do I get a workable

My DVD player is supposed to play avi videos, but it often doesn't telling me that the file format is not recognized. I suspect it's because it's the wrong codec. How can I tell what the codec is before I burn a DVD? And how do I get a workable codec? Thanks for uour help!
Ken Selvidge ([email protected])

I am not a computer savy person. I just need to plug in and have the machine do what it should do.
Not a problem, but that indicates you have a lot to learn.
File extensions like mpeg, mp4., avi, wmv, etc. are just wrappers. It is like a box the audio or video content is placed inside. The audio and video content must be encoded with a codec before it is placed in the box. There are thousands of codecs. Not all are installed on your Mac. You must have the same codec installed that encoded the video in order to play it. So, while Quicktime does support mpeg wrapper, it may not have the codecs to decode the internal video.
Some programs have lots of the codecs available to them, like VLC, Niceplayer, MPlayerX, etc.
You can also get "plug-ins" for Quicktime that add codecs to Quicktime, like Perian. Although it is no longer being developed, Perian still works well.
Why is it so difficult? Probably because they are always working on ways to compress the video to get better playback.

How do I tell what version (update / release level) of version 6 has been applied to my system?

Question
How do I tell what version (update / release level) of version 6 has been applied to my system? I have applied several different release levels to version 6 of FF but all the about feature tells me is Version 6.0. no version! This seems to be a change in the way updates are handled. Is that a bending because of the speed of which you're pushing out updates and new releases?
contact me if you need something more
''deleted email address''

@cchur <br />
Nope, I never used Chrome, but I did try Chromium on my Windows desktop PC for a few months last year. I got tired of the Google updater. exe running all the time and Google's method of doing updates, so it's gone. I do have Chromium on my Linux EeePC since last summer, but Ubuntu handles all updates and gives the user the capability to accept or deny, any or all updates - much more to my liking, similar to the way Mozilla does it. I don't like software developers forcing to update until I am ready to proceed.
There's a lot more about this new Fast Release system, than just the lack of visible version numbers, that I don't like. The Nightly, Aurora, Beta, & Release sequence is dumb with the way it changes the version numbers. I prefer installing (for instance) what will become version 7 and have that installation progress thru the 4 stages, instead. Now it's like Nightly going from 7 to 8, Aurora going from 6 to 7, and Beta doing - hell, I won't know if it becomes a Release or if it just dies and I will have to install the Release version myself. ''Quite honestly I don't care, because I don't think this new "system" is going to last too long without major modifications. Too damn many users are so pissed off, that when Firefox starts losing large numbers of users, Chrome keeps growing and eventually passes Firefox in number of users and market share of usage - Mozilla will wake up and see the "light" and change back to the way things used to be done, to a certain extent.''
I also dislike the UI changes in 4/5/6/7 enough that I am still using Firefox 3.6 for almost everything and Firefox 2.0.0.20 for the rest. I have been setting my toolbars up almost like Mozilla did for Firefox 4, since Firefox '''0.7''' in 2003 and I haven't come up with a workable combination of mods and extensions to configure Firefox to look and work the way I have been doing for almost 8 years now.

HT1338 how do i tell what my operating system is?

how do i tell what my operating system is?

Click on the Apple at the upper left and choose About This Mac. Your version of OS X will be shown.

How can I determine what dns server the wifi client use within airport

How can I determine what dns server the wifi client use within airport
I want to use dns servers other then the one that airport extreme is using. For example I got the 172.16.1.1 (the default gateway - airport extreme), but I want to use the office dns servers, that are in a 10.x.x.x range.
Is there a possibility?
Thanks and happy eastern

The Airport Extreme uses the DNS servers assigned by the network that it connects to. Is you Airport Extreme on the 10.x.x.x network? if it is then you are already using the 10.x.x.x DNS servers. Check your Airport Extreme with the Airport Utility and you will see in the Internet tab, the DNS servers used. The devices connecting to the Airport Extreme are assigned a DNS address of the Airport Extremes IP, In your case 172.16.1.1 but all DNS searches and resolution are done with the DNS servers you see in the Airport Extreme.
If you want to use some other DNS then you can override in the Airport Extreme which will be used by all devices connecting too the Airport Extreme, Or you can edit the DNS address in each devices wireless settings.

How do I tell what speed (wireless) the ATV is connected to my router at?

Similar Messages

Maybe you are looking for