How do I tell what version airport express I have? Airport Utility says this version does not support this base station. What to do, how to update?
I tried to add an older airport express to my network that I had not been using. It shows up in Airport Utility but Airport Utility says that this version of Airport Utility Dies not support this base station. I am running airport utility V6.3.4 on a mac mini running OS X 10.10. Not sure which airport express it is, nor how to check. I assume I need a firmware upgrade on the Airport Express, but not sure how to do this without Airport Utility. I tried to download an older version of Airport Utility, but could not install because it does not support OS X 10.10 Any ideas other than throwing a perfectly good airport express away?
Don't throw the AE away. It is still very useful as I have both the old & new each work well (sometimes the sound keeps dropping out but I think that has to do with the wirless settings!!!)
You need Airport Utility 5.6.1 which works in 10.10 - I managed to download a .dmg from the net but not sure how I could get it to you.
The new utility doesn't support the old AEs unfortunately which I have and Apple have no intention of allowing a utility that will cover all
AEs.
Try and get a version 5.6.1.
Similar Messages
-
When I click safari on my iMac it says my toolbar does not support this. What is the issue?
My safari won't open. When I click it, the message says the toolbar does not support this. How can I fix safari?
You installed the Conduit spyware. To remove it, back up all data, then follow these instructions.
If the instructions don't work, proceed as follows.
Triple-click the line below on this page to select it:
~/Library/Application Support/Conduit
Copy the selected text to the Clipboard (command-C). From the Finder menu bar, select
Go ▹ Go to Folder…
Paste into the box that opens (command-V), then press return. A Finder window should open with a folder named "Conduit" selected. If it does, delete the selected item.
Repeat with this line:
/Applications/Toolbars
Now you're deleting a folder named "Toolbars". You may be prompted for your login password. Next, copy this line:
/Library
Select Go to Folder… again and paste. Don't delete the Library folder. Delete only the following items inside it, if they exist.
Application Support/Conduit
InputManagers/CTLoader
LaunchAgents/com.conduit.loader.agent.plist
ScriptingAdditions/ct_scripting.osax
Close the Finder windows you opened. Log out and log back in.
I've seen a report that Conduit may be bundled with a scam "utility" called "MacKeeper." If you installed MacKeeper, you should remove it according to the developer's instructions. It's worthless and causes many problems reported on this site. -
I have lightroom 4.4 and it does not support Canon EOS 70D what to do?
I have lightroom 4.4 and it does not support Canon EOS 70D raw files. What do I do?
Several choices
Download the free Adobe DNG Converter version 8.5 and convert your RAWs to DNG and import those into Lightroom
Use the software that came with the camera to convert the RAWs into TIF and import those into Lightroom
Purchase the upgrade to Lightroom 5 -
How can I update the iphone to IOS versions that support the apps I want?
Viber and Skype aren't compatible, but you might try a similar app called Text Free (from Pinger):
https://itunes.apple.com/us/app/text-free-real-phone-number/id470580739?mt=8 -
The hdmi adapter no longer works, and I tried it on different tv, different hdmi cables, apple's adapter still don't work. My iOS is 5.1 by the way. HDMI cables work fine for other devices, connect it to my computer, works fine, connect it to dvd player works fine. So what is going APPLE? I splashed out SGD59 for this handy adapter, and it no longer works after a month!!!
ipadfan2012 wrote:
Hi yes, I've turned my new iPad off and turn it back on again, along with my Tv, still did not work
No. Meg was referring to a reset:
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc. -
I can not install the Express after the Extreme tha AirPort tool is of no help. It does not display any base station.
What is the exact model of the AirPort Express that you are trying to install? Which version of the AirPort Utility are you using? What is the operating system and version, and on what device, are you running the AirPort Utility on?
-
I have an older airport express. My airport utilities states that it does not support this base station. I am try ing to use the airport express in conjunction with a base station to air play my itunes library in another room. I have mountain lion on my Imac (purchased new in SEP of last year. My Imac was the last issued with an internal dvd drive.
Unfortunately, Apple discontinued support of the older AirPort base stations with the introduction of Lion and Mountain Lion.
You might be able to use a somewhat complicated workaround.....not supported by Apple.....if you want to try to use the older AirPort Express.
See this thread for details:
https://discussions.apple.com/message/21397085#21397085
More background info here:
http://www.macworld.com/article/1167965/mountain_lion_and_the_ancient_airport_ba se_station.html -
I accidently deleted Safari and now I can't reinstall because it keeps telling me there is a newer version on my computer. The issue is my system does not support the newer version. Does anyone know how I can get around this?
Apple wanted to charge me 50 bucks jsut to talk to someone!
I believe you may be referring to the $49 ASL agreement at AppleCare? That is only when/if you are out of AppleCare Protection.
Can you get to an AppleStore Genius Bar?
They may be able to fix this for you. No charge.
I highly doubt that. There is a $70 charge for troubleshooing software issues, EVEN IF there is AppleCare Warranty on the hardware.
However, since there is no charge for an appointment at a Bar, go make one, and see what options they give you. Let us know how it goes. -
i have a problem with installing PS13 as I get an error message "This installer does not support installation on a 64-Bit Windows operating system. Please download the 64-Bit version of Photoshop Elements." how do i do this
Try downloading the trial. It ought to detect that you have a 64-bit system.
You aren't using Vista, are you? PSE 13 requires at least win 7 and I think a few folks with vista have gotten a similar error message on trying to install it. -
Unable to install photoshop elements 13 on new computer (Windows 8.1 OS). Error message is: This installer does not support installation on a 64-Bit windows operating system. Please download the 64-Bit version of photoshop elements. How do I do this?
You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html -
I have a license of the PARTY 11, recently expired, to find out what was going on I have PSE 11 uninstalled. Reinstall does not work because the license has expired. Can I purchase the upgrade version of PSE 12 now or should I buy a full program?
Ok thank you, I better can wait then.
Greetings, Evert Annen
Op 8 sep. 2014 19:45 schreef "Peru Bob" <[email protected]>:
I have a license of the PSE 11, recently expired, to find out what
was going on I have PSE 11 uninstalled. Reinstall does not work because the
license has expired. Can I purchase the upgrade version of PSE 12 now or
should I buy a full program? created by Peru Bob
<https://forums.adobe.com/people/Peru+Bob> in Photoshop Elements - View
the full discussion <https://forums.adobe.com/message/6711348#6711348> -
"Exchange organisation does not support this version of Exchange server"
I am facing the error "Exchange Organisation does not support this version of exchange server" at time of installation of exchange server 2007 in the Windows server 2008 Enterprise edition.
I have already installed exchange Server 2010 in the that domain.
The following the image that show the error that i am facing
I have the checked current Active Directory or Exchange Server schema version by using
Using that i got the following information
"dsquery * cn=schema,cn=configuration,dc=india,dc=local -scope base -attr objectVersion"
objectVersion = Windows Server 2008 RTM
CN=ms-Exch-Schema-Version-Pt,cn=schema,cn=configuration,dc=india,dc=local -scope base -attr rangeUpper"
rangeUpper = 14726 ( Exchange server 2010 sp1)
I am attaching the Exchange server setup logs here
[5/31/2013 3:04:28 PM] [0] **********************************************
[5/31/2013 3:04:28 PM] [0] Starting Microsoft Exchange 2007 Setup
[5/31/2013 3:04:28 PM] [0] **********************************************
[5/31/2013 3:04:28 PM] [0] Operating System version: Microsoft Windows NT 6.1.7600.0.
[5/31/2013 3:04:28 PM] [0] Setup version: 8.1.240.6.
[5/31/2013 3:04:28 PM] [0] Logged on user: INDIA\administrator.
[5/31/2013 3:04:28 PM] [0] Command Line Parameter Name='mode', Value='Install'.
[5/31/2013 3:04:28 PM] [0] Command Line Parameter Name='sourcedir', Value='C:\Exchange2007'.
[5/31/2013 3:04:28 PM] [0] Command Line Parameter Name='fromsetup', Value=''.
[5/31/2013 3:04:28 PM] [0] ExSetupUI was started with the following command: '-mode:install -sourcedir:C:\Exchange2007 /FromSetup'.
[5/31/2013 3:04:29 PM] [0] Setup is choosing the domain controller to use
[5/31/2013 3:04:29 PM] [0] Setup is choosing a local domain controller...
[5/31/2013 3:04:31 PM] [0] Setup has chosen the local domain controller NewDelhi.india.local for initial queries
[5/31/2013 3:04:31 PM] [0] PrepareAD has either not been run or has not replicated to the domain controller used by Setup. Setup will attempt to use the Schema Master domain controller NewDelhi.india.local
[5/31/2013 3:04:31 PM] [0] The schema master domain controller is available
[5/31/2013 3:04:31 PM] [0] The schema master domain controller is in the local domain; setup will use NewDelhi.india.local
[5/31/2013 3:04:31 PM] [0] Setup is choosing a global catalog...
[5/31/2013 3:04:31 PM] [0] Setup has chosen the global catalog server NewDelhi.india.local.
[5/31/2013 3:04:31 PM] [0] Setup will use the domain controller 'NewDelhi.india.local'.
[5/31/2013 3:04:31 PM] [0] Setup will use the global catalog 'NewDelhi.india.local'.
[5/31/2013 3:04:31 PM] [0] Exchange configuration container for the organization is 'CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=india,DC=local'.
[5/31/2013 3:04:31 PM] [0] No Exchange organization container was found for the organization. Message: 'Could not find the Organization Container.'.
[5/31/2013 3:04:31 PM] [0] Setup will search for an Exchange Server object for the local machine with name 'PONDY'.
[5/31/2013 3:04:31 PM] [0] No Exchange Server with identity 'PONDY' was found.
[5/31/2013 3:04:31 PM] [0] The following roles are unpacked:
[5/31/2013 3:04:31 PM] [0] The following roles are installed:
[5/31/2013 3:04:31 PM] [0] The local server does not have any Exchange files installed.
[5/31/2013 3:04:31 PM] [0] Setup will use the path 'C:\Exchange2007' for installing Exchange.
[5/31/2013 3:04:31 PM] [0] The server is cluster type: 'None'.
[5/31/2013 3:04:31 PM] [0] The requested cluster type: 'None'.
[5/31/2013 3:04:31 PM] [0] The installation mode is set to: 'Install'.
[5/31/2013 3:04:31 PM] [0] Exchange organization name is required for this mode.
[5/31/2013 3:04:31 PM] [0] Active Directory Initialization status : 'True'.
[5/31/2013 3:04:31 PM] [0] Schema Update Required Status : 'False'.
[5/31/2013 3:04:31 PM] [0] Organization Configuration Update Required Status : 'True'.
[5/31/2013 3:04:31 PM] [0] Domain Configuration Update Required Status : 'False'.
[5/31/2013 3:04:32 PM] [0] Applying default role selection state
[5/31/2013 3:04:32 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:32 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:32 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
[5/31/2013 3:04:32 PM] [0] InstallModeDataHandler has 4 DataHandlers
[5/31/2013 3:04:32 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:32 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:32 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
[5/31/2013 3:04:32 PM] [0] InstallModeDataHandler has 5 DataHandlers
[5/31/2013 3:04:32 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:32 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:32 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
[5/31/2013 3:04:32 PM] [0] InstallModeDataHandler has 6 DataHandlers
[5/31/2013 3:04:32 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:32 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:32 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
[5/31/2013 3:04:32 PM] [0] InstallModeDataHandler has 6 DataHandlers
[5/31/2013 3:04:32 PM] [0] RootDataHandler has 1 DataHandlers
[5/31/2013 3:04:44 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:44 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:44 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
[5/31/2013 3:04:44 PM] [0] InstallModeDataHandler has 5 DataHandlers
[5/31/2013 3:04:44 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:44 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:44 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
[5/31/2013 3:04:44 PM] [0] InstallModeDataHandler has 4 DataHandlers
[5/31/2013 3:04:44 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:44 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:44 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
[5/31/2013 3:04:44 PM] [0] InstallModeDataHandler has 1 DataHandlers
[5/31/2013 3:04:46 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:46 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:46 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
[5/31/2013 3:04:46 PM] [0] InstallModeDataHandler has 4 DataHandlers
[5/31/2013 3:04:48 PM] [0] Validating options for the 0 requested roles
[5/31/2013 3:04:48 PM] [0] Validating options for the 0 requested roles
[5/31/2013 3:04:53 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:53 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:53 PM] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
[5/31/2013 3:04:53 PM] [0] **************
[5/31/2013 3:04:53 PM] [0] Setup will run the task 'test-setuphealth'
[5/31/2013 3:04:53 PM] [1] Setup launched task 'test-setuphealth -DomainController 'NewDelhi.india.local' -DownloadConfigurationUpdates $true -ExchangeVersion '8.1.240.6' -Roles 'Global' -ScanType
'PrecheckInstall' -SetupRoles 'Global' -PrepareOrganization $true'
[5/31/2013 3:04:53 PM] [1] Beginning processing.
[5/31/2013 3:05:24 PM] [1] [ERROR] The Exchange organization does not support this version of Exchange Server.
[5/31/2013 3:05:24 PM] [1] Ending processing.
[5/31/2013 3:05:24 PM] [0] **************
[5/31/2013 3:05:24 PM] [0] Setup will run the task 'test-setuphealth'
[5/31/2013 3:05:24 PM] [1] Setup launched task 'test-setuphealth -DomainController 'NewDelhi.india.local' -DownloadConfigurationUpdates $false -ExchangeVersion '8.1.240.6' -Roles 'Mailbox' -ScanType 'PrecheckInstall' -SetupRoles 'AdminTools','Mailbox' -CreatePublicDB
$true -TargetDir 'C:\Program Files\Microsoft\Exchange Server' -IISInstalled $true'
[5/31/2013 3:05:24 PM] [1] Beginning processing.
[5/31/2013 3:05:27 PM] [1] [ERROR] The Exchange organization does not support this version of Exchange Server.
[5/31/2013 3:05:27 PM] [1] Ending processing.
[5/31/2013 3:05:40 PM] [0] End of Setup
[5/31/2013 3:05:40 PM] [0] **********************************************
Please suggest me how to install the exchange server 2007 SP1 on the domain that has exchange server 2010 sp1
Thanksdear amit can u tell me I have one doming sg.com .I used for lab first I install in exchange server 2013 is normaly install and working fine .then I format my pc and agine install exchange 2010
Exchange organisation does not support this version of Exchange server
warning
setup is going to perepare the organization for exchange 2010 by using setup/ prepare AD . no exchange 2007 server roles have been deteted in this topology .
please can u tell me the how install exchange 2010
thanks -
Error when trying to re-mount a VHDx (the version does not support this version of the file format)
Hi,
I have a vhdx on a NAS that I use for server backup. I created the VHDx via disk management, mounted it and assigned drive letter X. I now created a script that gets triggered upon startup via task scheduler to remount the VHD. If I try to mount it however,
it tells me this:
No matter what I try, I can't mount it. Double clicking just says this:
Eventviewer spits out error 137: The default transaction resource manager on volume X: encountered a non-retryable error and could not start. The data contains the error code.
How do I trouble shoot this? oO Originally I had created the VHD as expanding, where now I recreated it at it's full size of 900GB. Maybe that will make a difference.
Thanks for the help
Cheers
MaikeHi Maike,
Do you mean that you can mount the VHDX via disk management but cannot mount it via a script? If so, please provide the diskpart’s mount commands in the script.
In the meantime, check if destination partition is NTFS formatted.
Problem with Attach VHD function: The version does not support this version of the file format
http://www.paulauskis.lt/2010/03/problem-with-attach-vhd-function.html
Please Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there.
Best Regards,
Mandy
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
Hi Mandy,
I can not mount it after a reboot. So I create the VHDx via disc management and attach it afterwards without problem. After the server reboots and the attached VHDx dropps, I can't remount it. Gives me the errors I posted above.
As I had mentioned above, I recreated the VHDx at it's full size this time, rather than expanding. That worked just fine and I can remount after reboot.
So I consider this dealt with ;)
Thanks anyway! -
I recently had wanted to sign-up for an e-card web-site. However, when I clicked on the web-page, I am NOT ABLE TO HEAR ANY MUSIC. The message shown is that Apple does not support MIDI music.
What other software can I download in order for me to listen to the music on this web-page?Systran wrote:
I recently had wanted to sign-up for an e-card web-site. However, when I clicked on the web-page, I am NOT ABLE TO HEAR ANY MUSIC. The message shown is that Apple does not support MIDI music.
Please don't tell my wife this, she's been working with MIDI on her Mac(s) since the turn of the century...
The statement from that web site is completely incorrect. What they probably meant was that their software doesn't support Mac. IMHO this is a sign of either ignorance or lack of concern on the part of the site creators. Back in the dark ages a lot of PC apps didn't support Mac but not these days.
Get into your Mac Help window and search MIDI. There's plenty of info there on how your Mac supports MIDI. -
Mac OS X v 10.7 Lion does not support Norton Antivirus? what to do? Buy another one?
Need advice!
Mac OS X v 10.7 Lion does not support Norton Antivirus? what to do? Buy another one?Sophos seems like the best alternative to me.
No, the best alternative is not to install any commercial "anti-virus" products. They're all worse than useless, including Sophos.
Mac OS X versions 10.6.7 and later have built-in detection of known Mac malware in downloaded files. The recognition database is automatically updated once a day; however, you shouldn't rely on it, because the attackers are always at least a day ahead of the defenders. In most cases, there’s no benefit from any other automated protection against malware.
The most effective defense against malware is your own intelligence. All known Mac malware takes the form of trojans that can only operate if the victim is duped into running them. If you're smarter than the malware attacker thinks you are, you won't be duped. That means, primarily, that you never install software from an untrustworthy source. Any website that prompts you to install software, such as a “codec” or “plug-in,” that comes from that same site, or an unknown site, is untrustworthy. A web operator who tells you that you have a “virus,” or that anything else is wrong with your computer, or that you have won a prize in a contest you never entered, is trying to commit a crime with you as the victim.
Software with a corporate brand, such as Adobe Flash, must be downloaded directly from the developer’s website. No intermediary is acceptable.
Never install any commercial "anti-virus" products for the Mac, as they're all counter-productive. If you need to be able to detect Windows malware in your files, use ClamXav -- nothing else. -
When I try to install adobe photoshop 13 on my computer it comes up with the following error message " This installer does not support installation on a 64bit windows operating system" error code 6. How to I recify this? TIA
You can try downloading the 64 bit version. You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html
Maybe you are looking for
-
Comparing an Item in a List to...
Hello. I'm new to these forums, and this is my first post here. I'm working on a hangman game just for fun, and I've run into a snag. When it checks to see if the key pressed is equal to (or the same as) the letter in position x. Every time, even if
-
Can 5 axis image stabilization be engaged with non system lenses for A7II and A7rII?
Many people use/will use their excellent non system manual focus non system macro lenses on the A7II and undoubtedly on the soon to be released A7RII. Stabilization in the X/Y planes is very very important for macro. Sony on the A7II only stablizes t
-
Arno's firewall - blocking ICMP?
Hey all, I'm trying to block my computer from responding to ping requests. I've found what appears to be the relevant syntax for iptables, but I can't use it with Arno' firewall script, which obviously is what I'm using for the rest of the firewall.
-
I've downloaded (on ibook) a "how to" book on autodesk maya. The hard copy comes with a tutorial DVD. Is there a way I can retrieve this material or did I lose out on those goodies?
-
HT1040 Ordering more photo books
Hello How do I order more Photo books? I work at a school and have produced a photo album, how can parents if they wish order the album?