How do I temporairily stop using Fire Fox? I'd like to switch back and forth with IOE.

When I first got FF, I had to click on the icon to turn it on. That was great. Now it seems to have taken over as my only operating system. I'd like to be able to switch back and forth with IE as I have lots of info located on the hard drive in places which seem easier to get to with IE. When I turn off my computer I click on the FF icon and turn it off, but to no avail. Not only is it there when I start up my machine again, it has saved some of the items which I worked on prior to shuting it down. It's becoming a real pain!!!!

Just open Internet Explorer! You can even use Firefox and IE at the same time, if you care to - Firefox doesn't stop you from using another browser, either ny itself or when Firefox is running.

Similar Messages

I have a G5 PPC Dual 20" Mac Displays - I want to incorporate a Mac Mini and still use my keyboard and Monitors and Switch back and forth. How do I do this?

I have a G5 PPC Dual 20" Mac Displays - I want to incorporate a Mac Mini and still use my keyboard and Monitors and Switch back and forth. How do I do this?

The Hatter,
I am a novice at Mac so I read all I can. From what I understand the NEC monitors I bought require Display Port for their maximum performance. The GTX 680 only has DVI outputs. Difference from what I understand is larger bandwidth with the DP.
You said I have the 4000 for CUDA. I am not all that familiar with CUDA and when I do read about it I do not understand it.
A concern I have is, that if I connect the 2 high end NEC monitors via the 5770, using it's 2 Display Ports I would have nothing connected to the 4000. Is the 4000 doing anything with nothing connected? I read where in a PC system the 2 cards would interact but in a Mac system they do not.
Bottom line, as I see it, the 4000 will not be useful at all to me, since I want a dual monitor set-up.
So far the 5870 seems the best choice, higher band width than the 5770, and it has 2 Display Ports to optimize the NEC monitors.
I'm not sure how fine I am splitting hairs, nor do I know how important those hairs are. I am just trying to set up a really fast reliable system that will mainly be used for CS6 and LR4. Those NEC monitors are supposed to be top notch.

Can I make a second libary on a second hard drive and how do I switch back and forth

I woud like to creat a second libary for itunes on a second hard drive. I am using the latest itunes and lion on my imac and how do I switch back and forth.

Yes. You can.
Start iTunes with the Option depressed and that will allow you to select the library.
Allan

How can I switch back and forth from Classic to Tiger

How can I switch back and forth from OS9.2.2 to Tiger without restarting? I want Classic as my startup system.

I think that the number of clicks to open a file is a rather shortsighted way to compare two operating systems.<<</div>
Well excuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuse ME!
I happen to think it's a pain to click twice on files when I'm used to clicking just once.
But Tiger is a nice operating system. I enjoy that it has much more capabilities than the OS9. I mean, Tiger keeps up with the advancing internet. My beef is really against OS9. I can open OS9 in Tiger but not Tiger in OS9.

How do I switch back and forth between Roku and Verizon FIOS TV?

I just purchased a Roku 3500R Streaming Stick (HDMI). I set it up with no problem. What I can't figure out is how to switch easily between viewing the Roku and viewing regular TV. The only way I was able to get rid of the Roku screen was to unplug the Roku from the one HDMI connection on my TV, and replace it with the HDMI connection from my set-top box. If I got an HDMI splitter, would there be a way to switch back and forth without unplugging things?
FYI, my TV is a Sony Model KDL-32S2010. Any suggestions would be gratefully accepted!

Looks like your TV only has 1 HDMI port.
A splitter won't work. Would need to get an HDMI switch.
Or just get component cables (will need 4) to run from FIOS box to Component ports (3 video and 2 audio) on the back of your TV.
Then just use the TV menu to switch back and forth.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

Typically, How many back and forths with Creative Support before they acknowledge your questi

Typically, how many times does one have to go back and forth with Creative Support before they acknowledge an issue or question?
This is ridiculous.
I'm on the forth reply now.
All I want to know is if there is a?64-bit ASIO driver for the X-Fi Titanium on 64-bit Vista?
They will not answer me.
All of my testing indicates that there is not a 64-bit ASIO driver for Vista, but they will not confirm or deny.
:angry:

dRe: Typically, How many back and forths with Creative Support before they acknowledge your question?U I don't know what Creative would have written if you asked SUpport these days?
I assume, they lied when they wrote this. There are several walkarounds for XFI cards
with beta drivers. In releas drivers they exclude the ASIOx64, but in beta it's included!
Creative has a very awkward marketing strategy. This was with Vista not having EAX on Audigy as
the said it is impossible. The newer X-FI was able to?do it and after a few weeks the Audigy also could-
after paying for it. The same with DolbyDigital Li've... and now with x64 ASIO. They reduce features
in cases the cheaper card had same possibilities as the more expensi've EMUs...
Shame on them. I?baught a creative Card for the 4th time (SB, SB AWE32,Audigy2, and now Titanium).
I'm going to thinking about selling it...

How to switch back and forth from mac to windows????

for some reason, i'm unable to switch back and forth from windows to mac right now. i rarely shut down my mac, but did today and when it restarted, it naturally restarted in windows. i then held down the keys i thought i was supposed to and restarted it, but don't have the option of getting back into my mac side. what keys am i supposed to hold down while restarting the computer?? i feel like the mac side is being held hostage! i thought it was ctrl & the apple key that i was to hold down at the same time. anyone? anyone??

Hi and welcome to Discussion,
to 'release the hostage' you have to hold down the 'Option/Alt'-key during restart and are then greeted by a Boot-Menu from which you can choose which one to boot.
Once in OSX you might want to go to System Preferences - Startup Volume and choose OSX as the default.
After the needed restart OSX boots up automatically unless you again use the Option-key to choose Windows.
Regards
Stefan

Can I switch back and forth the same sim card between an old iPhone 4 and a new one never used in order to activate the latter? Should I use same Apple Account?

Can I switch back and forth the same sim card between an old iPhone 4 and a new one never used in order to activate the latter? Should I use same Apple Account? Should I activate it via WiFi or iTunes? I am filtering on the MAC no and I cannot read that number from the new iPhone without having it activated??!!
All I want do is to have the new phone activated and then tested!
Ciao // Mufftas

Yes, you can do that.

How do I keep my iPad from switching back and forth from my Apple ID to my husbands Apple ID?

How do I keep my iPad from switching back and forth from my Apple ID to my husbands Apple ID?

Your question confuses me because there is no way that the iPad can switch Apple ID's without user input. Where are you seeing evidence of this?
If you are seeing app updates that require your husbands ID, that's because those apps were purchased with his ID and will always require his ID and password for updates.
If you are seeing his ID elsewhere, explain....

How do I keep multiple windows open and switch back and forth?

How do I keep multiple windows open and switch back and forth?

billyg27,
if you hold down a Command key and press the Tab key, it will show a set of icons representing your currently opened programs. Press Tab until you arrive at the program you’d like to switch to, and then release the Command key.

HELP! How can I switch back and forth from LT to FCE to sync sound?

I'm using LT 1.2.1 and FCE 3.0. I haven't used it for 2 or 3 years, but people in this forum have been amazing at helping me get an old project working again.
Here's my latest question. I swore back then there was a way to move back and forth between LT and FCP so I wouldn't have to render my LT files each time I wanted to drop it into FCP.
Here's what I'm doing:
I've created an entire "movie" in LT that now needs to be fine-tuned to be sync'd up with a professional voiceover, which is why I'm using FCP. The only way I can figure out how to make sure the LT file is going to be sync'd with the audio is to render the movie in LT, import it into FCE, see if the audio works with it, if not, I go back to LT, move things around, then re-render, import into FCE, and hope it all sync's.
I think there was an easier way to go back and forth between the two.
Along the same lines, is there a way to get the audio from FCE (or some sort of a representation) into LT? The LT file must be adapted to the audio, and if I could "see" the audio in LT, it would be infinitely easier.
Thanks!
Bob

LiveType does not support any kind of audio, Bob.
Go through your movie in the FC Timeline and set markers at the relevant cue points by pressing M.
Pressing M a second time whilst sitting on the marker, will open a dialog where you can type a suitable description in the name field. Keep the description short -it might help to take notes too.
Export a copy of the movie (including markers) and bring it into LiveType with File > Place background Movie. The markers will show up at the top of the LT timeline, with their descriptions.
Delete the background from LiveType when you have everything lined up. Save your LT project file and import it into FCE. You can use the project file exactly like a video clip.
If you need to go back to LiveType for changes, right click the LT file in FCE's Timeline. Choose "Open in Editor". This will open the project in LT. Make changes, save the file and it will update in FCE.
Message was edited by: Nick Holmes

I do NOT like the new Firefox. I do alot of work back and forth with pages, with this new system it slows me down. How can I restore my older version

I work on Bay listing items, I have to go back and forth on sites. The new firefox dosn`t allow this. It has back arrows, but pop up asking request are very annoying, and take much more time, The older version would allow me to drop down to the previous pages..I want my old version back. This new version has a whole lotta extra unneeded crap that just takes L O N G E R to load.. It sucks..How can I restore the older version

See this thread:
https://discussions.apple.com/thread/4661473
It contains instructions for downgrading to iTunes 10 and also an explanation of how to use the new search features from tt2 if you want to try again with iTunes 11.

How do I switch back and forth from Mac to Vista?

I am on Mac OS right now and cant figure out how to switch to Vista, also when im in Vista how do I switch back to Mac?
thanks

Restart the computer with the Option key held down, select the desired OS, and press Enter, or use the Startup Disk pane of System Preferences in Mac OS X and the Startup Disk control panel in Windows to change it. If you're using Boot Camp, you need to restart the computer to change.
(42617)

I want to work on my web-site and switch back and forth between the public view and the admin view but Firefox keeps closing one of them - how do I disarm this?

Before upgrading to this version of Firefox I could simultaneously have my public version and my admin version of my web-site open. I could make changes in the admin version and then check to make sure the public version registered and displayed the changes just as I wanted them. Now it keeps switching so both of them are public or both of them are admin. I want to know how to disarm this function. Thanks!

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

How do I capture software simulations when having to switch back and forth between applications?

Working with service reps who use multiple systems to complete an order. Need to know how to guide them in the use of Captivate 8 to produce a software simulation that includes the entire process.

Hi there
It sounds as if you might be thinking that Captivate typically records a single application. Certainly it *CAN* work that way, but it also can record just an area of the screen. This is what I'm thinking you are wanting in this case. Just define an area of the screen (possibly even the entire screen) and record that. Then your reps can move between applications.
Cheers... Rick

How do I temporairily stop using Fire Fox? I'd like to switch back and forth with IOE.

Similar Messages

Maybe you are looking for