How do I terminate an application

what code do I use to end a program on a button click i.e a Quit button. So in my event handler...

thanks, I know that was a stupid question...my mind was blank and I was too lazy to go searching through my notes!
thanks!

Similar Messages

Terminate web application from servlet

It will be very helpful to me if any one found me the solution for the following.
How can i terminate web application from servlet and also i want to close the browser window immediately from servlets?

How can i terminate web application from servletWhat do you mean by this?
also i want to close the browser window immediately
from servlets?The servlet can't close a browser window, but could send back client code that closes it (i.e. JavaScript as part of an HTML page).

When i double click home button, I can see many applications running. How do I terminate these?

When i double click home button, I can see many applications running. How do I terminate these?

Those are not necessarily running. It's a list of previously opened apps for the most part. You can flick the cards upwards to get rid of them.

I have installed Adobe packages and cannot find the Acrobat extension folder please advise how can I get these applications to load onto my computer?

I have installed Adobe Creative Cloud for teams CC Packages which says that Acrobat XI Pro is installed. Your support page says it does not install Acrobat and I have to look in the Extensions folder for an MSI file. I have run a number of searches and cannot find the Acrobat extension folder please advise how can I get these applications to load onto my computer?
Also I now administer the teams and have accepted the invitation to I received to be a team member and download the apps. The admin page shows that I have been sent an invitation but does not show my account as "ACtive" unlike my other team members. I tried to use the link in the invite to accept it become active but the link displayed an error saying I had already accepted the invite... why is no account not active?
Finally what other product downloads in Creative Cloud do not actually download as part of the Creative cloud Packager for downloading the apps? e.g. acrobat and what else?

My apologies Eadeszoo I believe our support agents are unavailable on January 1.
Are you able to copy the contents of the DVD to your computer? Are you receiving any particular error messages when you are trying to install? Finally which operating system are you using?

How to integrate web based application to windows based application

Hi,
Experts,
we developed web based application in this when we raising
invoice document after adding this we need to updated Amount
in integratee SAP B1 then that Amount we need Update The
Amount in OACT Table how we can Update in Amount Field
in OACT Particular Account Code. plz Guide me. and how to
integrate web absed application to windowbased application
plz help me.
Regds,
Samapth.

Dear sampathdevunuri kumar,
You may develop the addon based on SDK DIServer for required function.
The DI Server is an extension of the DI API and supports all its objects. It is intended for high-volume data integration, where numerous client connections must be managed simultaneously and optimized for speed. It is also suitable where Web-services architecture is preferred.
Please refer to SDK help and SDK DIServer sample for more information.
Best Regards
Jane Jing
SAP Business One Forums team

HOW TO: Set up your application server to run BC4J

How To set up your application server to run BC4J.
INTRODUCTION
A running BC4J application is actually the combination of:
* Your own application files
* BC4J runtime libraries
In order to successfully run your BC4J application in local mode, the first requirement is
that your application server contains the necessary BC4J libraries.
This How To describes the steps required to ensure that you have a functional
BC4J runtime environment installed on your application server.
Oracle IAS 1.0.2 and Tomcat 3.1 will be used as examples.
THE BC4J RUNTIME LIBRARIES
Whatever application server you deploy to, the following libraries
are required in the following order to be in the classpath.
BC4J Libraries:
xmlparserv2.jar
jdev-rt.zip
jbojdbcpatch.zip
connectionmanager.zip
jbohtml.zip
jboimdomains.zip
ordim817.zip
ordvir817.zip
ordhttp.zip
jbomt.zip
jbodomorcl.zip
jboremote.zip
jndi.jar
jbodatum12.zip
These libraries can be found in <JDEV_HOME>/lib/
INSTALLING THE LIBRARIES ON IAS:
Installing the libraries is simply a matter of copying them to the
application server's filesystem and adding them to the classpath.
IAS's classpath can be modified by editing the file:
<IAS_HOME>\Apache\Jserv\conf\jserv.properties
In this file you'll find the existing pre-installed BC4J libraries which
looks like this:
wrapper.classpath=<IAS_HOME>\Apache\BC4J\lib\ordvir817.zip
wrapper.classpath=<IAS_HOME>\Apache\BC4J\lib\ordim817.zip
etc.
Note! These BC4J libraries correspond to JDeveloper 3.1.1.
In order to run JDev 3.2 based applications you will have to update these libraries
to JDeveloper 3.2 production.
Steps:
1. Copy (or FTP) the JDev 3.2 BC4J libraries from <JDEV_HOME>\lib to a NEW directory on the
appserver's filesystem called:
<IAS_HOME>\Apache\BC4J\newlib
2. Modify the classpath by editing <IAS_HOME>\Apache\Jserv\conf\jserv.properties.
Example: (modified classpath entries)
# New 3.2 BC4J Runtime libraries
wrapper.classpath=<IAS_HOME>\Apache\BC4J\newlib\xmlparserv2.jar
wrapper.classpath=<IAS_HOME>\Apache\BC4J\newlib\jdev-rt.zip
wrapper.classpath=<IAS_HOME>\Apache\BC4J\newlib\jbojdbcpatch.zip
wrapper.classpath=<IAS_HOME>\Apache\BC4J\newlib\connectionmanager.zip
wrapper.classpath=<IAS_HOME>\Apache\BC4J\newlib\jbohtml.zip
wrapper.classpath=<IAS_HOME>\Apache\BC4J\newlib\jboimdomains.zip
wrapper.classpath=<IAS_HOME>\Apache\BC4J\newlib\ordim817.zip
wrapper.classpath=<IAS_HOME>\Apache\BC4J\newlib\ordvir817.zip
wrapper.classpath=<IAS_HOME>\Apache\BC4J\newlib\ordhttp.zip
wrapper.classpath=<IAS_HOME>\Apache\BC4J\newlib\jbomt.zip
wrapper.classpath=<IAS_HOME>\Apache\BC4J\newlib\jbodomorcl.zip
wrapper.classpath=<IAS_HOME>\Apache\BC4J\newlib\jboremote.zip
wrapper.classpath=<IAS_HOME>\Apache\BC4J\newlib\jndi.jar
wrapper.classpath=<IAS_HOME>\Apache\BC4J\newlib\jbodatum12.zip
Note: Make sure to remove or comment out the existing 3.1.1 BC4J library entries!
To see the changes, you must restart IAS and that's it, your IAS will be updated with
the JDev 3.2 BC4J libraries which allow you to run BC4J Data Tags among other
things!
INSTALLING THE LIBRARIES ON TOMCAT
As before, this process involves both the copying of the libraries
and modifying the classpath.
After copying the BC4J libraries to a path accessible from Tomcat,
you can modify Tomcat's classpath by editing it's startup script:
<TOMCAT_HOME>\bin\tomcat.bat (NT)
<TOMCAT_HOME>\bin\tomcat.sh (Unix)
Here is a portion of a modified tomcat.bat (on NT)
rem Add BC4J libraries
set CLASSPATH=%CLASSPATH%;D:\bc4j_lib\xmlparserv2.jar
set CLASSPATH=%CLASSPATH%;D:\bc4j_lib\jdev-rt.zip
set CLASSPATH=%CLASSPATH%;D:\bc4j_lib\jbojdbcpatch.zip
set CLASSPATH=%CLASSPATH%;D:\bc4j_lib\connectionmanager.zip
set CLASSPATH=%CLASSPATH%;D:\bc4j_lib\jbohtml.zip
set CLASSPATH=%CLASSPATH%;D:\bc4j_lib\jboimdomains.zip
set CLASSPATH=%CLASSPATH%;D:\bc4j_lib\or dim817.zip
set CLASSPATH=%CLASSPATH%;D:\bc4j_lib\ordvir817.zip
set CLASSPATH=%CLASSPATH%;D:\bc4j_lib\ordhttp.zip
set CLASSPATH=%CLASSPATH%;D:\bc4j_lib\jbomt.zip
set CLASSPATH=%CLASSPATH%;D:\bc4j_lib\jbodomorcl.zip
set CLASSPATH=%CLASSPATH%;D:\bc4j_lib\jboremote.zip
set CLASSPATH=%CLASSPATH%;D:\bc4j_lib\jndi.jar
set CLASSPATH=%CLASSPATH%;D:\bc4j_lib\jbodatum12.zip
rem Add Oracle JDBC library
set CLASSPATH=%CLASSPATH%;D:\bc4j_lib\classes12.zip
Note: I also added the Oracle JDBC library since Tomcat does not have it.
It is found at:
<JDEV_HOME>\jdbc\lib\oracle8.1.7\classes12.zip
And That's It!
When Tomcat is restarted using this script, the necessary BC4J libraries
will be in the classpath..
A follow up How To:"How To Deploy a BC4J JSP Application on IAS and Tomcat"
will be posted shortly!

I copied the following files in jserv classpath
bc4jct.jar
bc4jctejb.jar
bc4jdomorcl.jar
bc4jhtml.jar
bc4jimdomains.jar
bc4jmt.jar
bc4jmtejb.jar
bc4juixtags.jar
collections.jar
datatags.jar
jdev-cm.jar
regexp.jar
share.jar
uix2.jar
cabo.war
classes12.jar
nls_charset12.jar
ordim.jar
ordhttp.jar
runtime12.jar
jdev-rt.jar
xmlparserv2.jar
bc4j_jclient_common.jar
webapp.war
I got this list from Jdev 9031 on-line help
I also copied the new DataTags.tld file to /webapp directory
When i run my jsp page i get this error..
java.lang.NoClassDefFoundError: java/util/TimerTask
     at oracle.jbo.http.HttpContainer.findSessionCookie(HttpContainer.java:693)
     at oracle.jbo.html.jsp.datatags.ApplicationModuleTag.doStartTag(ApplicationModuleTag.java:148)
     at jspapp.odrjsp__html._menu._jspService(Compiled Code)
     at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
     at oracle.jsp.app.JspApplication.dispatchRequest(Compiled Code)
     at oracle.jsp.JspServlet.doDispatch(Compiled Code)
     at oracle.jsp.JspServlet.internalService(Compiled Code)
     at oracle.jsp.JspServlet.service(Compiled Code)
     at javax.servlet.http.HttpServlet.service(Compiled Code)
     at oracle.portal.provider.v1.http.JspRenderer.renderBody(JspRenderer.java:116)
     at oracle.portal.provider.v1.RenderManager.render(RenderManager.java:164)
     at oracle.portal.provider.v1.http.ServletProviderResponse.showPortlet(Compiled Code)
     at oracle.portal.provider.v1.http.HttpProvider.dispatchProviderAction(Compiled Code)
     at oracle.portal.provider.v1.http.HttpProvider.service(Compiled Code)
     at javax.servlet.http.HttpServlet.service(Compiled Code)
     at org.apache.jserv.JServConnection.processRequest(Compiled Code)
     at org.apache.jserv.JServConnection.run(Compiled Code)
     at java.lang.Thread.run(Compiled Code)
In the JDK 1.3 APi docs, i found that TimerTask was introduced only in JDK 1.3
Does this mean that BC4J (in jdev 9031) will only work
with JDK 1.3 or later?
Thanks for your time.
Harish

How to upload logo from application server

Hi all,
Plz show me the way how to upload logo from application server into sap script.
What is NGT.
Thanks in advance
Venkat

Hi
You have to import your logo in SAP by SE78 before using it in a SAPSCRIPT.
So have you done it?
If yes, it depends on how you have imported the logo:
- As std text:
INCLUDE <LOGO TEXT> OBJECT TEXT ID ST LANGUAGE <LANGUAGE>
- As graphic:
BITMAP <LOGO GRAPHIC> OBJECT GRAPHICS ID BMAP TYPE BCOL
Max

How to handle file on application server without coading?

HI all,
can anybody tell me How to handle file on application server without coading? Is there any solution?
Thanks in advance.

> can anybody tell me How to handle file on application server without coading? Is there any solution?
what is that you want to handle. what you do if you don't code ...

How to create file on application server?

how to create file on application server?

Hi,
The following program illustrates the creation of ifle in app server and reading the file from appli server:
DATA: ITAB LIKE vbakOCCURS 0 WITH HEADER LINE.
PARAMETERS: P_VBELN LIKE VBAP-VBELN.
START-OF-SELECTION.
SELECT *
    FROM VBAP
    INTO TABLE ITAB
WHERE VBELN = P_VBELN
    PERFORM WRITE_DATA.
    PERFORM READ_DATA.
*&      Form WRITE_DATA
      text
--> p1        text
<-- p2        text
FORM WRITE_DATA.
OPEN DATASET 'VBAP_DATA' FOR OUTPUT IN TEXT MODE.
LOOP AT ITAB.
TRANSFER ITAB TO 'VBAP_DATA'.
ENDLOOP.
CLOSE DATASET 'VBAP_DATA'.
CLEAR: ITAB, ITAB[].
ENDFORM.                    " WRITE_DATA
*&      Form READ_DATA
      text
--> p1        text
<-- p2        text
FORM READ_DATA.
OPEN DATASET 'VBAP_DATA' FOR INPUT IN TEXT MODE.
DO.
READ DATASET 'VBAP_DATA' INTO ITAB.
IF SY-SUBRC <> 0.
EXIT.
ENDIF.
APPEND ITAB.
ENDDO.
CLOSE DATASET 'VBAP_DATA'.
LOOP AT ITAB.
WRITE:/ ITAB-VBELN,
        ITAB-POSNR.
ENDLOOP.
ENDFORM.                    " READ_DATA
If it is helpful rewards points
Regards
Pratap.M

How to download file from application server

Hi Experts,
              I developed report and execute in background mode. for this i used Open dataset transfer and close dataset . i got the requried output . But in this case user want downloaded file on presentation server so can anyone tell me How to download file from application server?
i know it is possible through Tcode CG3Y. but i want code in program.

This code will download a file to your Client package by package, so it will also work for huge files.
*& Report ZBI_DOWNLOAD_APPSERVER_FILE
REPORT zbi_download_appserver_file.
PARAMETERS: lv_as_fn TYPE sapb-sappfad
DEFAULT '/usr/sap/WBP/DVEBMGS00/work/ZBSPL_R01.CSV'.
PARAMETERS: lv_cl_fn TYPE string
DEFAULT 'C:\Users\atsvioli\Desktop\Budget Backups\ZBSPL_R01.CSV'.
START-OF-SELECTION.
CONSTANTS blocksize TYPE i VALUE 524287.
CONSTANTS packagesize TYPE i VALUE 8.
TYPES ty_datablock(blocksize) TYPE x.
DATA lv_fil TYPE epsf-epsfilnam.
DATA lv_dir TYPE epsf-epsdirnam.
DATA ls_data TYPE ty_datablock.
DATA lt_data TYPE STANDARD TABLE OF ty_datablock.
DATA lv_block_len TYPE i.
DATA lv_package_len TYPE i.
DATA lv_subrc TYPE sy-subrc.
DATA lv_msgv1 LIKE sy-msgv1.
DATA lv_processed_so_far TYPE p.
DATA lv_append TYPE c.
DATA lv_status TYPE string.
DATA lv_filesize TYPE p.
DATA lv_percent TYPE i.
"Determine size
SPLIT lv_as_fn AT '/' INTO lv_dir lv_fil.
CALL FUNCTION 'EPS_GET_FILE_ATTRIBUTES'
    EXPORTING
      file_name      = lv_fil
      dir_name       = lv_dir
    IMPORTING
      file_size_long = lv_filesize.
"Open the file on application server
OPEN DATASET lv_as_fn FOR INPUT IN BINARY MODE MESSAGE lv_msgv1.
IF sy-subrc <> 0.
    MESSAGE e048(cms) WITH lv_as_fn lv_msgv1 RAISING file_read_error.
    EXIT.
ENDIF.
lv_processed_so_far = 0.
DO.
    REFRESH lt_data.
    lv_package_len = 0.
    DO packagesize TIMES.
      CLEAR ls_data.
      CLEAR lv_block_len.
      READ DATASET lv_as_fn INTO ls_data MAXIMUM LENGTH blocksize LENGTH lv_block_len.
      lv_subrc = sy-subrc.
      IF lv_block_len > 0.
        lv_package_len = lv_package_len + lv_block_len.
        APPEND ls_data TO lt_data.
      ENDIF.
      "End of file
      IF lv_subrc <> 0.
        EXIT.
      ENDIF.
    ENDDO.
    IF lv_package_len > 0.
      "Put file to client
      IF lv_processed_so_far = 0.
        lv_append = ' '.
      ELSE.
        lv_append = 'X'.
      ENDIF.
      CALL FUNCTION 'GUI_DOWNLOAD'
        EXPORTING
          bin_filesize         = lv_package_len
          filename             = lv_cl_fn
          filetype             = 'BIN'
          append               = lv_append
          show_transfer_status = abap_false
        TABLES
          data_tab             = lt_data.
      lv_processed_so_far = lv_processed_so_far + lv_package_len.
      "Status display
      lv_percent = lv_processed_so_far * 100 / lv_filesize.
      lv_status = |{ lv_percent }% - { lv_processed_so_far } bytes downloaded of { lv_filesize }|.
      CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
        EXPORTING          "percentage = lv_percent - will make it fash
          text = lv_status.
    ENDIF.
    "End of file
    IF lv_subrc <> 0.
      EXIT.
    ENDIF.
ENDDO.
"Close the file on application server
CLOSE DATASET lv_as_fn.

How to transfer file from application server to presentation server in background?

Hi Experts,
How to transfer file from application server to presentation server in background?
Thanks in advance
Namita

Thanks Raman and Challa,
We want to move file from application server to Shared folder, not on local machine. We checked FM which you guys have provided but those are not able to read file from application server.
We need this program to run in background so that we can use this in daily process chain.
Appreciate your inputs on this.
Thanks,
Namita

How to upload file from Application Server?

Dear Friends,
How to upload file from Application Server?
Plz. with example...
Regards,
Dharmesh

hi,
check the code for upload from application server.
tables: kna1.
types: begin of s_file,
         customer type kna1-kunnr,
         country type kna1-land1,
         name     type kna1-name1,
         region   type kna1-regio,
       end of s_file.
*--Internal tables
data: it_file type s_file occurs 0 with header line.
*-- Selection screen
selection-screen: begin of block b1 with frame title text-001.
parameter: p_file type rlgrap-filename default 'C:/customer.txt'
obligatory.
selection-screen: end of block b1.
*-- At selection screen
at selection-screen on value-request for p_file.
perform file_help using p_file.
*-- Process File
start-of-selection.
perform upload_file using p_file.
*-- write File data to o/p
end-of-selection.
perform write_data.
*&      Form file_help
form file_help using    p_p_file.
data: l_filepath type ibipparms-path.
call function 'F4_FILENAME'
EXPORTING
PROGRAM_NAME        = SYST-CPROG
DYNPRO_NUMBER       = SYST-DYNNR
FIELD_NAME          = ' '
   importing
     file_name           = l_filepath
p_p_file = l_filepath.
endform.                    " file_help
*&      Form upload_file
form upload_file using    p_p_file.
call function 'WS_UPLOAD'
   exporting
     filename                      = p_p_file
     filetype                      = 'DAT'
IMPORTING
FILELENGTH                    =
    tables
      data_tab                      = it_file
   exceptions
     conversion_error              = 1
     file_open_error               = 2
     file_read_error               = 3
     invalid_type                  = 4
     no_batch                      = 5
     unknown_error                 = 6
     invalid_table_width           = 7
     gui_refuse_filetransfer       = 8
     customer_error                = 9
     no_authority                  = 10
     others                        = 11
if sy-subrc <> 0.
    message i001.
endif.
endform.                    " upload_file
*&      Form write_data
form write_data .
loop at it_file.
    write:/ it_file-customer, it_file-country, it_file-name,
            it_file-region.
endloop.
endform.
regards,
keerthi.

Open With... How to Change List of Applications?

I installed Photoshop CS2 recently and now a whole slew of applications show up when I click on a jpg file and select "Open With..." I know how to change the default application for the files, but how do I remove applications from this list? I don't need to ever choose between 40 applications to open jpeg files - just a few. How can I pare down this list?
Thanks,
tommy

Then why don't you remove them yourself? Go to this page and download PropertyListEditor.dmg. It normally is incuded with the free XCode package from Apple.
Install the app in your Utilities folder and then you can edit plist files whenever you want.
Open com.apple.launchservices.plist and unfold the object tree. Now you can browse and delete objects. It is recommended you backup the file before messing with it.
You can also "Dump" the entire file, it might be faster to see what all is in it.

How to call a WD4A Application of another system

Hi,
I have the need to call a WebDynpro Application of another system via a URL call, thet the application should be opend in the CRM WebUI Window (statefull ) .
Calling the application via a button event & transaction launcher works fine, but i need to call it from a BSP page. So my idea was to create an iframe, but this obviously opens a new window:
<html>
<head>
    <title>IFrames - Webdynpro Test</title>
</head>
<body>
    <iframe src=<%= lv_url_route %>"
      width="100%" height="500" scrolling="auto" frameborder="1" transparency>
          </iframe>
</body>
<html>
Can anybody help?!?!
Thanx & best regards,
Oliver
Edited by: Oliver Pregler on Jul 28, 2008 3:26 PM

Hi Oliver,
unfortunately I know nothing about BSP-Applications, but this is how I call my WD4A-Application using a FM from CRM:
data: lr_empty_parent type ref to cl_gui_container,
      lr_viewer       type ref to cl_gui_html_viewer.
data: lv_url(200)     type c.
lv_url = 'http://www.xyz.com'.
create object lr_viewer
    exporting
      parent             = lr_empty_parent
    exceptions
      cntl_error         = 1
      cntl_install_error = 2
      dp_install_error   = 3
      dp_error           = 4
      others             = 5.
if sy-subrc <> 0.
    message id sy-msgid type sy-msgty number sy-msgno
              with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
lr_viewer->detach_url_in_browser(
    exporting
      url              = lv_url
    exceptions
      cntl_error       = 1
      dp_error_general = 2
      others           = 3 ).
if sy-subrc <> 0.
    message id sy-msgid type sy-msgty number sy-msgno
               with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
cl_gui_cfw=>flush( ).
If it helps you - fine. If not - forget it
Best regards
Jörg Racz

How to Import 3.0 application in APEX 3.2?

How to Import 3.0 application in APEX 3.2? These two are on two different machines. It is not upgrade.
Pls help.

Hello,
APEX supports backward compatibility. It means that 3.2 version can run any application that was developed in earlier versions.
In your case, just export the full application from 3.0 and import it in the 3.2
Regards,
Arie.
&diams; Please remember to mark appropriate posts as correct/helpful. For the long run, it will benefit us all.
&diams; Forthcoming book about APEX: Oracle Application Express 3.2 – The Essentials and More

How do I terminate an application

Similar Messages

Maybe you are looking for