How do I tile a picture in the background OFF the stage?

Okay, since my stage doesn't take up the whole window when viewing it on the Internet, is there a way to tile a picture in the background? So no matter how big someone's screen is, in the background they will see a tiled picture.
Sorry if that sounds confusing. I'm not very good at explaining myself...

Hi! I tried adding to the HTML code
<body background="gradient-3-max.jpg">
but doesn't work... also tried
<body background="gradient-3-max.jpg" leftMargin=0 topMargin=0 marginheight="0" marginwidth="0">
doesn't work too.
Did I miss out anything? Any ideas?
Thks!

Similar Messages

In elements 11, how will I load 2 pictures in the same work space of the photo editor

in Elements 11, I am working on face swapping, how can I load 2 pictures in the same workspace of the photo editor

Editor preferences>general>allow floating documents in expert mode, then window>images>cascade or tile. You may need to choose float all in windows the first time before you can make either of those work.

How can I send multiple pictures to the Kodak link (under file & then order prints)? if the photos are not sequential can it be done?

how can I send multiple pictures to the Kodak link (under file & then order prints)? if the photos are not sequential can it be done?

Does the order matter here?Because the photos will be sent for printing. If there is any other reason, can you please cite example.

How do you enlarge a picture in the edit workspace?

how do you enlarge a picture in the edit workspace?

ok I figured that out by incre
asing the % on the lower left
of picture

How can i get my pictures from the cloud if deleted from my Iphone

how can i get my pictures from the cloud if deleted from my Iphone?

Restore a backup of your phone that was made while the photos were still on it. It should include your camera roll photos. This explains how to restore an iCloud backup: iCloud: Restore your iOS device from iCloud.

How do i get my pictures,contacts and apps off my old phone. i ready did a storage back up on my old phone. how do i upload the stuff on my new phone even though its already setup

how do i get my pictures,contacts and apps off my old phone. i ready did a storage back up on my old phone. how do i upload the stuff on my new phone even though its already setup

In this case you would have to reset your new device (Settings > General > Reset > Erase All Content and Settings) in order to restore it from a backup during the device setup.

How do I take a picture of the screen on my iPad Air?

How can I take a picture of the screen on my iPad Air?

Tap the On/Off button and at the same time tap the Home button. The resultant picture will be saved to your "Camera Roll".

How do I take a picture of the screen?

How do I take a picture of the screen?

You can also use spotlight (Cmd + Space) to search for and start an app called Grab (or look in the Applications folder...). With this program you can capture a selection of the screen, a window, the whole screen and more. See menuoption Capture for these options.

How do you delete unwanted pictures from the photo library on the iPhone 4s? The one with the Daisy icon...

How do you delete unwanted pictures from the photo library on the iPhone 4s? The ones in the Daisy icon...

Pictures in Photo Library are synced from your computer and must be deleted from there, followed by re-sync. Photos in Camera Roll can be deleted from your iPhone directly (tap arrow in top right, tap the pictures you want to delete, press the Delete button).

Cant see the import picture on the stage

I import a picture on the stage
I only see a blank box on the stage ( but I can see the
picture in the library)
how can I resolve this problem? please help me
the
picture

kanatan
You can import to the stage, or to the library. Usually I
import to the library. If you are going to import directly to the
stage, you must click your mouse in the layer that the image should
go into.
Hope this helps

How do I load a picture from the clipboard (either Windows clipboard or Labview clipboard) into image data that can then be processed in Labview?

I want to load a picture from the Windows clipboard (and if not possible, then from the Labview clipboard) into actual numerical image data so that it can be processed in lab view. When I'm at the main screen where I can add controls, I see a section of controls called "Vision" in the tool bar where all the different controls can can be added from. When I go to the control called "Image" and put that on my form, and then look at the flowchart/blockdiagram programing window to see what inputs and outputs it has, I only see one output, and no inputs. And when I right click on it, I see NO way to load an image into the Image control. PLEASE help me.
Message Edited by Ben321 on 11-09-2008 04:32 PM

Hi Ben,
National Instruments has an image processing software called Vision and although I am not completely sure, I think the controls that you found in the control pallet are used in conjunction with the software. Depending on what kind of image processing you want to conduct in LabVIEW, you might want to consider purchasing that product.
If cost is an issue, there are functions in LabVIEW which allows you to take in image files and process them. However, please keep in mind that the capabilities are limited.
Images should be loaded onto LabVIEW not via the clipboard but through loading it from folders or directories. (There might be a way to and so if you find a way please let me know! I would like to know myself =D) If you open the function pallet by right clicking on the block diagram, in the programming folder you should find a directory called "Graphic and Sound". There, you'll find functions in which allows you to process images.
In the "Graphic Type" directory there should be a function called Read JPEG file.vi. There are also others which allows you to read png and bmp files. Please note that there are functions which write as well. Set a file path on the block diagram and inside the "Grahic and Sound" there is a "Picture Function" directory and inside there, there should be a function called "Draw Flattened Pixmap.vi" That changes the image into a format where you can process on LabVIEW. Inside the "Picture Function" directory there are several functions which allows you to process the specified image. Play around with it and see how it goes. And don't forget to Write the file in the end to save any changes.
I hope this helps
National Instruments Japan
Applications Engineer Taiki Hoshi

How do I patch print pictures with the filename?

I have 1000 student proof pictures to print on envelopes. one per envelope. I'm trying to figure out how to print the picture with the file name included. I need the file name printed under the picture so that when the students turn in their order
I can find their pictures. I've been doing a contact sheet of one coloumn and one row. this gets the name included with the picture, however, the system crashes if I try to do all 1000 at once. So I have to break it down into separate folders. I've found that if i try to this with more than
76 pictures photoshop freezes and I have to restart. There's got to be an easier way to do this. Please, help.

If you have InDesign, you could set up a data merge to do this.
Your data file would have one text column with the image name, and one image column (header beginning with '@)
Set up the first page and run the merge.

How can i add a picture to the album?

i have a picture for the album just dont know how to import it on the iTunes?

In your iTunes Library, select the album. Then click on File/Get Info/Info and paste the artwork into the box named Artwork (in the lower right corner). Click OK

HT4623 How do I change my picture in the messages for my IPAD mini?

How do I change my picture in my message app?

You do realize that the photo that you see in the messages app is NOT transmitted to the person that you are messaging with. You simply associate that photo with your contacts for your own purposes. That photo is for your viewing pleasure only. If you change your photo in the contacts app, the other person will not see it anyway when you message.

How do I put a picture in the background on Pages

I must be having a senior moment! In the past I have made a poster in Pages and put a picture in the background and text over the top.
I have just tried to do it again and can't for the life of me remember how to do it. I do have a new version of Pages which has confused me slightly.
Any help would be much appreciated.
Kathy

Menu > Arrange > Section Master > Move object to Section Master
You also should still have Pages '09 still in your Applications/iWork folder
Pages 5.5.3 has over 100 + features missing and is comparatively buggy.
Peter

How do I tile a picture in the background OFF the stage?

Similar Messages

Maybe you are looking for