How do I transfer/place my existing Final Cut Pro X on my new iMac?

I have been using Final Cut Pro X on a Mac Book Pro. I just upgraded to an iMac 27". How do I transfer/add my existing download of Final Cut Pro X to my new iMac?

CCopy it from one machine to the other. You can use a jump drive, the app isn't that big. You will have to download the additional content on the other machine.

Similar Messages

  • How do I transfer my film from final cut pro to DVD studio pro and burn it?

    Hi, I'm just wondering how it works and how to do it. Thanks.

    You first start off reading the manual and looking at free online tutorials like this. If you get stuck, come on back and we'll do our best to help.
    http://dvdstepbystep.com/fasttrackover.php
    Message was edited by: Eric Pautsch1

  • I CAN'T INSTALL FINAL CUT PRO 3 ON MY NEW INTEL IMAC, HELP!!!

    I'm trying to install FINAL CUT PRO 3 onto my new iMac but can't. It reads the disk but then says, "Original disk needed for install." I have the original disk, I own a registered copy of the program, so I'm stuck.

    Hi -
    I believe Final Cut 5 is designed to run on a Power PC CPU machine, the current MacBooks use Intel chips - so the software will not install on your Intel based MacBook.
    You can, however, upgrade from a full version of Final Cut 5 to Final Cut Studio 3 which contains the latest version of FCP, version 7 as well as Compressor, Color, Soundtrack Pro and Motion for $299 which is a steal as the full version for Final Cut Studio 3 is $999.
    You only need the serial number of the full version (non-academic or non-upgrade version) to do the FCS 3 upgrade - you don't need to have FCP 5 loaded on your machine to make the upgrade work.
    Hope this helps.
    MtD

  • How to work on TOD files on Final Cut Pro

    Hi,
    I can't figure out how to work on .TOD files on Final Cut Pro. I'm using a JVC Everio HD40 camera. None of the sequence presets work. Is there a plug-in or something else I could try?
    Thanks for any help!

    .TOD is JVCs version of an MPEG 2 file.
    Use Log and Transfer from the File menu and convert to ProRes.

  • I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?

    I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?

    at the end, you say "import preferences", which program are you describing?
    So im safer using footage that is remotely being pulled from iphoto...
    vs
    using footage that is imported into FCP from imovie?
    Is there anything i can do in fcp to make this footage more reliable or safer or more stable as i pull remotely from iphoto?
    All the footage, and all the libraries to all programs, or on a new pegasus 12tb raid 5 setup fyi.

  • How to switch to older version of final cut pro x from 10.1.2?

    How to switch to previous version of Final cut pro X after once it is updated to 10.1.2?

    M. Stochholm wrote:
    This project plays 1:50:00.
    Kindly
    Michael
    Not sure what that means…1 minute  and 50 seconds? Or 1 hour and 50 minutes?
    Russ

  • How do I export a project from Final Cut Pro onto my desktop?

    How do I export a project from Final Cut Pro to my desktop as a movie?

    Can anyone please help me.. when I click on my timeline in my project library and try to export movie nothing happens! and when I  try to "share" to youtube I get an error message stating that it cannot be exported because it contains "no video"... The 4 minute music video that I've created with shots off my Canon T2i looks and plays great....If I uploaded the videos into Final Cut but did not save them on my desktop or anywhere else on the Mac would this be a reason to get this message? I have never experienced this before...the only option under "share" that works is "email"
    [email protected]

  • How do I make a pic in final cut Pro stop  flickering?

    how do I make a pic in final cut Pro stop  flickering?

    Question: how do I make a pic in final cut Pro stop  flickering?
    Answer: It depends on what is causing the flickering.  It could be due to the pixel dimensions being too large for the Sequence settings in FCP.  It could be due to thin horizontal lines in the image.  It could be due to areas of the image in high contrast with each other.   Or it could be due to a combination of several factors.
    If the image is too large, reduce the pixel dimensions to a more reasonable size.
    If it's due to thin horizontal lines, deinterlace the image, or slightly blur the lines in Photoshop.
    If it's due to areas of high contrrast, reduce the contrast of those areas in Photoshop.
    In FCP you can also try applying the Flicker filter to the image in the Timeline and/or a Gaussian blur filter with a setting of around 0.2 or 0.3
    -DH

  • How do use the hum remover in final cut pro 5? Help

    How do use the hum remover in final cut pro 5? Help!!

    Simply drop the effect onto the appropriate audio track. Set the frequency for the hum frequency (50Hz or 60Hz depending on your power supply). Include whichever harmonics you think might be present eg. 100, 150, 200Hz.
    Note that I have generally had more success by using Soundtrack Pro's noise removal tool.
    Trevor

  • Animation. How do I import still images in final cut pro x (from dragon frame) duration 3 frames pr. image?

    Animation. How do I import still images in final cut pro x (from dragon frame) duration 3 frames pr. image? We have allready tried to set stillimages duration in preferences to 0,08 sek, but it does not have any effect!

    You can drag your images to the timeline, select all, ctrl-d and set the duration to 3 frames by typing 3 and enter.
    Or you can use Quicktime 7 to "open image sequence", select the desired duration, export your animation to quicktime and import that into FCP X for further editing.

  • How do i burn a dvd using final cut pro x

    how do i burn a dvd using final cut pro x?

    Use the Share button at the far right end of the Toolbar or File>Share>DVD.

  • How do I stabilize a timelapse on final cut pro?

    How do I stabilize a timelapse on final cut pro? I took a time-lapse in a car, and the footage is shaky so I would like to stable it, I have created a compound clip with all the images that make up the time-lapse, but stabilization does not show up as an option. Can anyone help?

    danidando wrote:
    … I don't have and don't want to buy Compressor or Steeamclip or Motion?
    Mpeg Streamclip is free, well&widely recommended ...

  • Hi, I accidentally deleted a project in trash. How do I get it back into final cut pro X. It is still sitting in trash,

    Hi, I accidentally deleted a project in trash. How do I get it back into final cut pro X. It is still sitting in trash.

    If your working on an external hard drive, just drag/drop back in the Final Cut Projects folder, and re-open FCPX

  • Can I / how do I transfer my Windows platform Creative Suite 3.3 to my new iMac?

    Can I / how do I transfer my Windows platform Creative Suite 3.3 to my new iMac?

    You cannot. The license is for Winows only. CS6 can only be changed from Windows to Mac.
    You can purchase CS6 Mac, or subscribe to Creative cloud where you will be able to use your products on windows and Mac.
    Gene

  • Will final cut pro X 10.0.8  still be available for purchase after the new final cut pro release for mavericks/new macpro in december?

    will final cut pro X 10.0.8  still be available for purchase after the new final cut pro release for mavericks/new macpro in december?

    10.0.8 is no longer available, except in the trial version. The current sale version is 10.0.9. Apple has never sold older versions of their software, only the current version. That's not going to change in the near future.

Maybe you are looking for

  • Selection-screen code error

    hi all,      i am trying to code selection screen. where in when i click on 1 pushbutton one field should be active and the other one should be invisible. the code is syntactically correct but when i execute it . it is not working properly . i am una

  • Flash Builder 4.6 mobile connetion oracle and php

    Hi everyone im new in flash builder and as far i know Flash Builder 4.6 gives you the option to create sample PHP code, but only gives an option for a MySQL database.  Does anyone have some PHP sample code for using Oracle? I try few proyect and they

  • Help for F4 help

    I paint a listbox on screen . I want to show three fields in the listbox . But only 2 field can be showed in the listbox. why? The source code is : module set_datalist input. data:begin of itab occurs 0,     BNAME like USR02-BNAME,     GLTGV like usr

  • Help reg: Creating PO & Effective price problem

    Hi Experts, I am creating PO from transaction me21n. Here i see PBXX as condition type under conditions tab. Now the thing is that whenever i create a PO from me21n it picks net price which i have entered, but when i create a PO from "bapi_po_create1

  • Pci exhaust fan

    just got myself a pci exhaust fan,its only a cheapish one and i know its not the best for cooling but since ive installed it my case temp has dropped about 3-4c an my cpu temp has dropped about 2c so not to bad i think for very little money   anyone