How do I transfer the complete action panel in Adobe CC from my laptop to my new desktop?
How do I transfer the complete action panel in Adobe CC from my laptop to my new desktop?
You do not transfer, you install
Cloud License allows 2 activations http://www.adobe.com/legal/licenses-terms.html
-Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0
-Windows or Mac does not matter... 2 on the same operating system, or 1 on each
-Both computer Cloud subscriptions may not be in use at the same time
Similar Messages
-
How can I transfer the e-mails that I have sent from my OUTBOX in a webserver to Thunderbird?
I have an e-mail account in a webserver (STRATO Communicator), and I want to transfer all my e-mails to Thunderbird.
I have installed Thunderbird, and I have managed to transfer all the e-mails from my INBOX from the webserver to Thunderbird.
However, I do not know how I can also transfer all the e-mails that I have sent from my OUTBOX in the webserver (STRATO Communicator) to Thunderbird as well.
Can anyone help me? Thank you very much in advance!Pop mail accounts can only access the Inbox on the server.
So if you are using a Pop mail account then there is a workaround.
In Thunderbird
Move all emails out of Inbox into other suitable folders for organising.
This makes it easy to detect the 'outbox' emails.
Logon to webmail account and move all emails from Outbox to Inbox
then in Thunderbird use Get Messages to download those emails.
You can then move those emails into a suitable folder like 'Sent'.
Please note than in Thunderbird, the account Sent folder keeps a record of what was sent by you.
The 'Outbox' located in Local Folders, is the Outbox for all mail accounts in Thunderbird. It is not a place to store emails.
In Thunderbird, when you select 'Send', it sends email immediately and puts copy in 'Sent' folder. However, if you use 'Send Later', it puts email in 'Outbox' ready to go when you select 'Send unsent messages', at which point copies are stored in 'Sent' folder and removed from 'Outbox'. -
How can I hide the main front panel when I run from the executable?
Hopefully this is an easy question. I have an application where the front panel is not the main GUI and I would like to hide it when the program runs, but only when it runs from the executable. How can I do this?
NIquist wrote:
Yeah, don't do that. Executables built in LV require at least one front panel to be open. If it isn't, the run-time engine automatically closes the executable. I haven't checked recently, but I assume this is still the case.
Instead, you can set the FP state to minimized (as suggested earlier) or (better) to hidden.
P.S. one side point - the property and invoke nodes have a shortcut - if you use the Application or VI classes and don't connect a reference, they default to the current app or VI. That means you don't have to open the reference.
Try to take over the world! -
On my old (Win XP) computer I had saved hundreds of messages in Local Folders.
I got a new Windows 8.1 computer a few months ago. I installed Thunderbird and have been using it ever since. But I would like to copy the contents of the Local Folders from the old to the new computer.
Is there a way to transfer them on a memory stick and get them loaded into Thunderbird on the new computer?On the XP computer, select Help/Troubleshooting Information, click Show Folder to open the profile folder in Explorer. Open the Mail subfolder, then the Local Folders subfolder. There, you will see files with the name of your folders, but with no extension. These are the mbox files that contain the messages; copy them to the memory stick.
On the other computer, repeat as above to open the profile folder, exit TB, and copy the mbox files into the Mail/Local Folders directory. Open TB, and you should see the folders under Local Folders. -
have 2 imac computers and here are my questions: first, how to I transfer the information from my contact directory from my old imac into my new imac? Once the information is transfered how can I print it? Second: I have a large music collection in my old Imac computer how do I transfer this information to my new computer? Also how can I share this information with other computers at home?
I think you may find helpful information here:
A Basic Guide for Migrating to Intel-Macs
The Knowledgebase article Intel-based Mac: Some migrated applications may need to be updated refers to methods of dealing with migrating from PowerPC chips to Intel with the Migration Assistant safely. The authors of this tip have not had a chance to verify this works in all instances, or that it avoids the 10.6.1 and earlier Guest Account bug that caused account information to get deleted upon use of the Migration/Setup Assistant. However, a well backed up source that includes at least two backups of all the data that are not connected to your machine will help you avoid potential issues, should they arise. In event it does not work, follow the steps below.
If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate. Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
Rosetta supports "software that runs on the PowerPC G3, G4, or G5 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
Classic Environment, and subsequently any Mac OS 9 or earlier applications
Screensavers written for the PowerPC System Preference add-ons
All Unsanity Haxies Browser and other plug-ins
Contextual Menu Items
Applications which specifically require the PowerPC G5 Kernel extensions
Java applications with JNI (PowerPC) libraries
See also What Can Be Translated by Rosetta.
In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior, TechTool Pro , SuperDuper , and Drive Genius work properly on Intel-Macs with Leopard. The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries. Leopard Cache Cleaner, Onyx, TinkerTool System, and Cocktail are now compatible with Leopard.
Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
Additional links that will be helpful to new Intel-Mac users:
Intel In Macs
Apple Guide to Universal Applications
MacInTouch List of Compatible Universal Binaries
MacInTouch List of Rosetta Compatible Applications
MacUpdate List of Intel-Compatible Software
Transferring data with Setup Assistant - Migration Assistant FAQ
Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode, copying the critical contents to CD and DVD, an external hard drive, or networking will work better when moving from PowerPC to Intel Macs. The initial section below discusses Target Disk Mode. It is then followed by a section which discusses networking with Macs that lack Firewire.
If both computers support the use of Firewire then you can use the following instructions:
1. Repair the hard drive and permissions using Disk Utility.
2. Backup your data. This is vitally important in case you make a mistake or there's some other problem.
3. Connect a Firewire cable between your old Mac and your new Intel Mac.
4. Startup your old Mac in Transferring files between two computers using FireWire.
5. Startup your new Mac for the first time, go through the setup and registration screens, but do NOT migrate data over. Get to your desktop on the new Mac without migrating any new data over.
If you are not able to use a Firewire connection (for example you have a Late 2008 MacBook that only supports USB:)
1. Set up a local home network: Creating a small Ethernet Network.
2. If you have a MacBook Air or Late 2008 MacBook see the following:
MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- What to do if migration is unsuccessful;
MacBook Air- Migration Tips and Tricks;
MacBook Air- Remote Disc, Migration, or Remote Install Mac OS X and wireless 802.11n networks.
Copy the following items from your old Mac to the new Mac:
In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
In your /Home/Library/ folder:
/Home/Library/Application Support/AddressBook (copy the whole folder) /Home/Library/Application Support/iCal (copy the whole folder)
Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
/Home/Library/Keychains (copy the whole folder) /Home/Library/Mail (copy the whole folder) /Home/Library/Preferences/ (copy the whole folder) /Home /Library/Calendars (copy the whole folder) /Home /Library/iTunes (copy the whole folder) /Home /Library/Safari (copy the whole folder)
If you want cookies:
/Home/Library/Cookies/Cookies.plist /Home/Library/Application Support/WebFoundation/HTTPCookies.plist
For Entourage users:
Entourage is in /Home/Documents/Microsoft User Data Also in /Home/Library/Preferences/Microsoft.
Credit goes to Macjack for this information.
If you need to transfer data for other applications please ask the vendor or ask in the Discussions where specific applications store their data.
5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
Written by Kappy with additional contributions from a brody.Revised 5/21/2011 -
Until recently I have owed 2 iPod Classics - 2007 80gb and 2009 160gb (which has since been returned as it had a very noisy hard drive).
How do I transfer the library from the 160gb to the 80gb in iTunes using Windows Vista.
Nothing seems to help on the Apple support pages, so any help would be appreciated
ThanksThanks for the reply, but not actually sure how to sync a second iPod with the library of the first, as I thought it would not recognise a new iPod for copyright reasons.
Also, the files are in a location on the pc but I had to do lots of formatting amendments in iTunes as most of the stuff was on mp3 files and the formatting was all over the place. I did not want to loose any of the work by simply asking the new iPod to look at the original file and would rather copy en masse from one device to another.
Any help or pointers greatly appreciated
Thanks -
I downloaded a video course from iTunes U to my iMac. How do I transfer the video to Apple TV to watch on my big screen TV?
I do something like that, and can confirm 20 feet won't be a problem. More than 30 or so might be.
-
I have 2 laptops and both have liberies,how can I transfer the music from my 1st account (laptop) into the newer one which I made a new account for.My Iclassic has music fro both liberies, but once I purchase a new song and try to sync, it into my iclassic it doesn't allow me todue to having both liberies.Can u plesae help
See Recover your iTunes library from your iPod or iOS device.
tt2 -
I changed my apple id and have a gift card credit on the old account which I no longer use. How do I transfer the gift card $ to my new apple id?
Click here and request assistance.
(75296) -
I have a Power PC G5 computer that I will soon be replacing with a current i5 or i7 Mini. How do I transfer the Time Machine files from the internal hard drive on the G5 to an external drive that I will later use with the Mini?
Hi, likely the easiest is to just poll the drive & get something like this...
Get MacScan...
http://www.apple.com/downloads/macosx/networking_security/macscan.html
http://eshop.macsales.com/item/NewerTech/U3NVSPATA/
But if you have a good external drive already, just clone it.
Get carbon copy cloner to make an exact copy of your old HD to the New one...
http://www.bombich.com/software/ccc.html
Or SuperDuper...
http://www.shirt-pocket.com/SuperDuper/ -
How do I transfer the songs from my desktop to my iPad using the same iTunes account? I can only sync the other way. Thanks
DaisyDoodle,
The songs on your Shuffle should still be in your iTunes library. That means you should just be able to connect your Nano to the same iTunes library and sync it just as you would with your Shuffle. There is no limit to the number of iPods, iPads, or iPhones you can sync to one computer, iTunes library, or account.
As for preparing the Shuffle for your husband, just restore it via iTunes and then let him sync it to his own iTunes library or if its the same iTunes library, let him configure it to sync only his content.
Here are instructions on how to restore the Shuffle if need be.
http://support.apple.com/kb/ht1481
B-rock -
HOW CAN I TRANSFER THE ITUNES PROGRAM ( NOT THE LIBRARIES,BUT THE ACTUALLY EXE PROGRAM ) FROM ONE CPU TO ANOTHER. I CAN'T
STAND THE NEW ITUNES. I WANT TO TRANSFER MY OLD ONE THAT STILL HAS THE SLIDER FEATURE. THANKSSounds like you've already installed iTunes 11 and are now trying to downgrade. To do so successfully you will also need access to a pre-upgrade copy of your library as set out below...
The main differences between iTunes 11 and earlier versions are the loss of coverflow and ability to have multiple windows open.
In Windows, you can restore much of the look & feel of iTunes 10.7 with these shortcuts:
ALT to temporarily display the menu bar
CTRL+B to show or hide the menu bar
CTRL+S to show or hide the sidebar
CTRL+/ to show or hide the status bar (won't hide for me on Win XP)
Click the magnifying glass top right and untick Search Entire Library to restore the old search behaviour
Use View > Hide <Media Kind> in the cloud or Edit > Preferences > Store and untick Show iTunes in the cloud purchases to hide the cloud items. The second method eliminates the cloud status column (and may let iTunes start up more quickly)
If you don't like having different coloured background & text in the Album (Grid) view use Edit > Preferences > General and untick Use custom colours for open albums, movies, etc.
With iTunes 11.0.3 you can enable artwork in the Songs & List views from View > Show View Options (CTRL+J) making it more like the old Album List view.
If you still feel the need to roll back to iTunes 10.7 first download a copy of the 32 bit installer or 64 bit installer as appropriate, uninstall iTunes and supporting software, i.e. Apple Application Support & Apple Mobile Device Support. Reboot. Restore the pre-upgrade version of your library database as per the diagram below, then install iTunes 10.7.
See iTunes Folder Watch for a tool to scan the media folder and catch up with any changes made since the backup file was created.
tt2 -
my laptop was stolen and with it my itunes, all of my music (including non-apple downloaded content) is still on my iphone 5, how can I transfer the files to my new laptop which is authorised to the same apple ID?
See this user tip for recovering the media from the iPhone: https://discussions.apple.com/docs/DOC-3991
-
before i buy the complete creative cloud, how many computers can i install it on with the one subscription? i have a macbook pro laptop and a iMac desktop, which i both need it on.
Creative Cloud Help | Creative Cloud / Common Questions
"Can I use the software I download from Creative Cloud on more than one machine?
Yes. Creative Cloud desktop applications can be downloaded and installed on multiple computers, regardless of operating system. However, activation is limited to two machines per individual associated with the membership. See the terms of use for more information. Learn how to deactivate a Creative Cloud license on a machine." -
How can i use the same front panel graph in more than one events in an event structure?
i want to display the signals from my sensorDAQ in a graph.but i have more than one event in the event structure to acquire the signal and display it in the graph.the first event is to acquire the threshold signals and its displayed in the graph as a feedback.after the first event is executed, i will call the second event,where the further signals are acuired and compared with the threshold signals from the event 1.my question is how can i use the same front panel control in more than two events in the event structure?please answer me i'm stuck.
Solved!
Go to Solution.Hi,
I have attached here an example of doing the same using shift registers and local variables. Take a look. Shift register is always a better option than local variables.
Regards,
Nitzz
(Give kudos to good answers, Mark it as a solution if your problem is Solved)
Attachments:
Graph and shift registers.vi 12 KB
graph and local variables.vi 12 KB
Maybe you are looking for
-
IMovie '09 Won't Import HD Content from Sony HDR-SR11 Camcorder
Hi, iMovie stopped importing HD content from Sony HDR-SR11 camcorder. It only recognizes the standard definition content in the preview thumbnails. Previously this used to work with both a FireWire cable and a Mini USB. All of a sudden it doesn't imp
-
How can you create a new category list and attach it to a new incident template
We intend to create helpdesks for various teams e.g. Facilities, IT, HR etc and allow staff to email separate email addresses via the exchange connector. So incidents get assigned to separate queues categorised via the support group set in the assig
-
Hi, I'm a new Mac user and need some help. Is there a way to send a file through email that is 900mb? I have a Comcast account and it won't let me send it, even if I compress it, or the mail inside Snow Leopard won't let me either. I'm trying to send
-
Hi! I'm coming because I want to do a fresh intall of Lion. I have a Mac Mini mid-2011 and came with Lion instaled. Yes, I know, ML is coming, but right now I will going to wait to maybe 10,8,2. Fine, the problem is, trying to download Lion, in the A
-
CCMS Connectivity with Status Error
Hi, I am in the process of System Monitoring using Solution Manager. In Setup System Monitoring window, Check CCMS connectivity is Red color, then I generated & save RFC connections for systems , but still I am getting same error with CCMS connectivi