How do I transition between pages using something other than a white screen

When the site first pulls up (I see this in Safari intermittently but not Firefox) the background is white (outside the page). After switching between pages it goes back to black. Can I have it use any other color besides white? How do I do this?
Also, when trying to pull up in Internet Explorer, there are numerous problems loading. How do I optimize for this browser?
dancingdogtreasures.com

Roddy has some tips at his iWeb for Musicians site: How to get your iWeb Site to load in Internet Explorer.
Using an optimizing application like Web Site Maestro can greatly reduce the "weight" of a site's pages to facilitate faster loading. I use it event thought my sites are geared for Mac users and it greatly reduces the size of the files in the site.

Similar Messages

Emailing form using something other than outlook

Is there anyway I get the form to use a different email system other than outlook when using the email button? We used to go through outlook and we could conveniently hit email and the form would attach and be ready to send. We switched email systems and now work in Zimbra. Is there an easy way to configure the email to use Zimbra instead? Thanks

The form will use the default mail client.
Jasmin

Has anyone set the SGE2000 to use something other than VLAN1 and how did you do it.

The SGE2000 uses VLAN1 for SNMP Management traffic by default. I tried to change to VLAN 2 by setting up an Access profile that set SNMP to VLAN 2 but it did not work. I am using the latest firmware.

Hi Kevin,
Thank you for participating in the Small Business support community. My name is Nico Muselle from Cisco Sofia SBSC.
Indeed this is the best option, to reserve the default (management) VLAN for what it is intended for ... management and set your clients to use another VLAN. I'm not sure if it is possible to separate SNMP traffic on a Windows XP machine and send that over the management VLAN, however, what you could do, is enable inter-vlan routing (either on the router, or set the switch to L3) and create an access-list that only allows the snmp traffic to be routed to and from the management VLAN.
This way you can keep your SNMP server in the management VLAN.
Wouldn't that be an option ?
Best regards,
Nico Muselle
Sr. Network Engineer - CCNA

Can I use something other than HDMI for the apple TV?

My TV and AVR are in different locations. For this I ran the connection with cat5 and hooked it all up with component video. The AVR won't down convert the hdmi to component out so therefore I can not plug hdmi into it. Does the apple tv connect video only through hdmi? If so could I hook up a unit to the tv itself and one to the receiver independently for sound?
I have a pioneer sc-25 and a samsung plasma (b650 maybe?)

That won't work. The only way you can get sound to the AVR without using the HDMI or optical cable is to use it as a remote speaker from iTunes. Remote speaker doesn't push video. You would have a synchronization problem between your tv and your remote speakers driven by iTunes.
Regards

Looking to reference files using something other than PHP includes

Hello -
Aside from using PHP includes, what would be another technology that I can use that allows me to use HTML file extensions, that if I make a change to a file in one location (assets/dirname/filename), it updates dependant pages? It's got a be Linux server friendly, and no templates or CMS stuff.
~Mike

No problem Mike,
Shouldn't matter if the pages are static or dynamic for includes to be useful. Some of the most common uses are headers, footers and menus for sites that have many pages, static, synamic or both.
For example; if you have a phone number in your footer and have 100 pages, it would be crazy to change 100 pages. Just change one small file and upload and your done.
Stick with the includes, you'll be glad you did
Brad Lawryk
Adobe Community Expert, Dreamweaver
Adobe Usergroup Manager, Northern British Columbia Adobe User Group

Email notification - can I use something other than Mail?

I've started using GyazMail instead of Apple's Mail application. However, whenever I get an email reminder I've set up for myself in iCal, Mail opens instead of GyazMail. I've set GyazMail as the default email application using the Preferences menu in Mail, but for whatever reason it seems that the reminders keep passing through to Mail instead of GyazMail.
Is there a way to change this?

I'm pretty sure you cannot get apple mail to interact with your other mail program - Afterall, Apple wants you to use their program - It's only been recent for example that ical can integrate other date info from such programs such as Entourage. Apple has been understandably slow to permit this kind of cross thru.
You can use any mail program you want of course. I use Entourage and also Gmail - Both receive my mail from different mail domains and tell me when new mail arrives. I don't use the apple mail program at all.
Hope this was kinda helpful.
G5, G4, G3, Classic, FCP Studio, Aperture, Cinema Displays etc, etc

Can I use something other than ITunes?.....

I am new to using a ipod and I am looking to get one, but I need to know if I can just use a downloading program and sync the music I download onto the ipod? I use morpheus to download music right now and use windows media player.
Toshiba Windows XP Laptop

Although Itunes is sort of the defacto standard for the iPod you can use a bunch of different programs that will interface with it...Try "Musicmatch" although you can't have "Musicmatch" on the same computer as Itunes as there is a compatibility problem so you have to uninstall Itunes to use Musicmatch but I think Musicmatch is much easier to use than Itunes.

How to pass values between pages?

Hi
Anybody know how you pass values like ids between pages using buttons?
Cheers
dan
Message was edited by:
user551484

Hi
Why do you want to do this? You can access values from other pages so if you are on page 2 and there is an item on page 1 called P1_ID you can simply assign it to an item on page 2 by typing in P1_ID in the source value for your page 2 item.
Or you could reference it direct in your pl/sql process by typing &P1_ID. (note the fullstop)
If you did want to pass a value using a button you can do so by clicking on the button name in then scroll down to the section called optional URL redirect.
set target is a - to page in this application
then select the page you want the button to send you to
then click the flashlight icon next to set these items
you can then select the page item you want to send the value to and the page item you are getting the value from.
Danny
Message was edited by:
Danny Roach

How to apply transitions between clips in the same track?

Hey guys,
I'm in Uni on Final Cut Pro 5 and all the videos and discussions tell of how to apply transitions between clips in the same track.
I like to have my clips on different tracks so that I can overlap them at specific points but I don't know how to do this?
If I have track one. . .which ends. . .and have track 2 beginning below that (and have it overlapped for a few seconds) I don't know how to enable the transition at the point where track 2 begins.
Can anyone help?

Yep I understand that.
Let's say I overlap track 2 as I don't like the beginning of it. . .so I want the transition from the end of track one to track two to occur in the middle of track 2 - should I just trim the track to the point I want the transition to occur as opposed to have it overlapping?

I am trying to delete pages I have crated in numbers, but can only see them in print preview. Without print preview I do not see them. How can I delete these pages, but keep others before and after?

I am trying to delete pages I have crated in numbers, but can only see them in print preview. Without print preview I do not see them. How can I delete these pages, but keep others before and after?

Hi Crushed,
Numbers doesn't have pages. It has a canvas that holds objects such as tables and charts.
Drag the objects from the bottom of the canvas onto the white space above. That will reduce the number of "pages" (sheets of paper) that will print.
Regards,
Ian.

How can i hide a pages file from other users

How can I hide a pages file so other users can't open or see it?

My own tip is to save this kind of doc in an encrypted disk image (the .dmg items)
Such item resemble to every downloaded installer so it doesn' take special attention and the encryption scheme is an efficient one.
Yvan KOENIG (VALLAURIS, France) dimanche 21 août 2011 14:53:01
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

I have a huge amount of my memory used by 'other' than photos and music - to my knowledge, there is nothing there apart from a few songs and photos and 5 podcasts. What could it be? How could I get rid of this 'other' stuff and get the memory back?

I have a huge amount of my memory used by 'other' than photos and music - to my knowledge, there is nothing there apart from a few songs and photos and 5 podcasts. What could it be? How could I get rid of this 'other' stuff and get the memory back?

See -> What is "Other" and what can I do about it? by Kappy.
Clinton

How to upgrade to something other than the most recent OS

I am currently running Os 10.6.8. I would like to update, but I have a critical application that is only qualified for 10.8.2 and the current operating system is 10.8.4. Is there a way to buy something other than the current OS?

Apple updates the OS X installer at the Mac App Store with the latest version, and older OS X versions disappear. If you want to upgrade to Mountain Lion and you purchase Mountain Lion at the App Store, you will get the OS X Mountain Lion installer with 10.8.4 installed, so it will install 10.8.4, without any possibility to install 10.8.2.
You can try changing system files to look like you are using 10.8.1 and try applying the 10.8.2 update, but doing this you may damage OS X Mountain Lion

ACS 4.2 RDBMS Action 105/108 - How to set to something other than default "RADIUS Token Server"

I'm trying to create an import script for RDBMS to import users, but cannot figure out how to set the "PASS_TYPE_RADIUS_TOKEN" to something other than the default of "RADIUS Token Server". We have multiple RADIUS Token Server definitions.
I can create a user with what I need, except external db password is set to "RADIUS Token Server". How do I set it to (for example) something like "RADIUS Token Server - xxxx"
We have more than 1 RADIUS Token Server definition called "RADIUS Token Server - xxxx", "RADIUS Token Server - yyyy".
Thanks!

As per my knowledge you have to update 4.2 ACS to
5.1, because when you go for RDBMS synchronization it wont allow you, I have faced problem in past while primary ACS was 4.1 and secondary I have 4.2, I have updated primary ACS to 4.2 and everything is working fine.

How to install ovi suite to a drive other than C:?...

how to install ovi suite to a drive other than c:??? my c: drive is almost full with other partitions perfectly free to install it, how do i do that? can i use previous versions of ovi suite to use with my e63? at this point, i'm unable to use ovi suite at all, because there's no room to install it on my c: drive.
allllllllso there's one more thing, when i originally had tried installing ovi suite on my computer i had more than 1gb free. after installing it i on'ly had 500mb free. i had only intended for it to use a very small amount of space, and since i also use my c: drive for virtual memory i quickly uninstalled it, looking for an option i'd maybe skipped over while installing it the first time. no luck. anyways, when i looked in the add/remove programs control panel the installed size of ovi suite was only 40-50mb. even after uninstalling ovi suite the extra memory space that seemed to all of a sudden taken up by the installation stayed used.
when looking at the file sizes of everything on my hard drive, (including system files and paging file) there is still a descreprency between the amount of memory used and the size of all files total on the drive. at this point im quite disgusted and disapointed in ovi suite as i'm mostly unable to use it to connect my phone to my computer and i'm also having problems with the CA101 cable as well. i guess i'll have to go check for another cable.
nokia!!! wake up and fix yo **bleep**!!!!
anyone have any solutions for the main problem? (installing to a drive other than c? is there support for this option in any of the new beta versions? can that be included in the newest betas? i'm suuuuuure i'm not the only one begging for this option!!!

Hi ostrenga4, sorry to hear about your experiences.
When installing Nokia Ovi Suite to PC, Windows makes "system restoration points", which are available to restore operating system to previous condition, if something goes wrong, for example in driver installation.
You can change install location of Nokia Ovi Suite with following:
- Download Nokia Ovi Suite install package from Nokia Ovi Suite pages
- Start Windows Command prompt
- From Command prompt, navigate to folder containing Nokia Ovi Suite install package, which you downloaded
- Start Nokia Ovi Suite install package with command line "Nokia_Ovi_Suite_webinstaller.exe /TARGET="D:\TestDir\Test"
- This results, that Nokia Ovi Suite installer creates folder D:\TestDir\Test (if that doesn't exist) and installs Nokia Ovi Suite there.
- Unfortunately, Windows Installer still keeps installer cache files and system restoration points in C: drive (or whatever your system drive is)
As you can see, this is possible, but it is very much recommend to have enough space for installing software into system drive.
Cheers, Samuli

How do I transition between pages using something other than a white screen

Similar Messages

Maybe you are looking for