How do I turn a non cellular iPad into a cellular iPad?

How do I turn a non cellular iPad into a cellular iPad?

You cannot turn a non cellular ipad into cellular. You must purchase this model from apple which will cost you an extra 130 usd $.

Similar Messages

  • How can I turn off "find my ipad" to restore to factory settings if screen is not working?

    How can I turn off "Find My iPad" to restore to factory settings if screen is not working?  I can't get access to the apps on my mini pad.  I can see the device when I'm in iTunes.

    Try resetting the iPad by holding the home and power keys down until the Apple logo appears.
    Barry

  • How do you turn on mobile with ipad...message I get when trying to update oto IOS

    How to you turn on mobile on Ipad or itunes so that you can update to

    Is this what you mean?
    There have been some problems accessing pages on the Apple web site.  If the hyperlink gives you a "We're sorry" message, try again.

  • HT1414 How can I turn off 'Find my IPad in settings if nothing is appearing on the screen ie cant navigate to Settings on the Ipad

    How can I turn off 'Find my IPad in settings if nothing is appearing on the screen ie cant navigate to Settings on the Ipad

    Hi Jim
    Thanks, held down the buttons and the apple logo appears in a flash, then nothing. Screen goes black.
    I am trying to restore the ipad through itunes, but it keeps telling me to turn off the find my ipad.
    Any other suggestions please??

  • HT3819 How do I turn on homesharing on iPad? I do not see the menu bar on the left side in iTunes. Thank you in advance

    How do I turn on homesharing on iPad? I do not see the menu bar on the left side in iTunes. Thank you in advance

    Home sharing support
    http://www.apple.com/support/homesharing/
    Understanding Home Sharing
    http://support.apple.com/kb/HT3819
    Troubleshooting home sharing
    http://support.apple.com/kb/TS2972

  • How can I turn my French apple account into Australian one to be able to buy a Iphoto book I've made?

    hi
    How can I turn my french apple account into an Australian one , to be able to buy a Iphoto book I 've created ?

    And you need to set the "Print Products Store" in the iPhoto Preferences "Advanced" to the country you are in. The credit card you will be using with your AppleID needs to be valid in the country your AppleID is registered to. Will you be staying permanently in Australia? Maybe it wuld be simpler to create a second AppleID just for the time of your stay there.

  • How can I turn my Mac using iTunes into an alarm clock?

    Here's my question: How can I turn my Mac, using iTunes, into an alarm clock?
    I want to be able to put my Mac to sleep but have it set up so that when it wakes up at the predetermined time iTunes will open and start playing the music I've selected....
    A "musical alarm clock"...
    A friend suggested using the Energy Saver option in Sys. Preferences to wake the computer at the right time. He said that then I could use iCal to start iTunes. I would then have to use an Apple Script to get iTunes to play the song I want.
    But is there a SIMPLER way to do this? Are there any programs out there that do this already??
    Thanks for any help....

    I recently got a copy of AlarmClock Pro from MacWorld UK. It is shareware, I think it is (USD?)19. I haven't had a chance to try it out much, but it does look quite good. I have an older version. The latest version looks even better.
    I'm sure there's plenty of freeware apps out there. You might also want to try looking here for an applescript here Doug's AppleScripts for iTunes
    p53

  • How do I turn a Labview measurement file into waveform data

    How do I turn a Labview measurement file into waveform data, I have done this recreating the waveform out of an array with build waveform vi, is there another way?

    OK I am sorted, sorry for such a stupid question!!!!!

  • How can i turn on my cellular data after updating to ios 5, how can i turn on my cellular data after updating to ios 5

    i updated my iphone to ios5 and but i forget to turn on my cellular data andi cannot use my phone cause its not activated and no service en i connect to itunes no sim card

    Did you try to reset your iPod by holding the sleep an home button until the Apple logo comes back again?
    Did you try to set it up as new device? How to back up your data and set up as a new device

  • How do you turn pages on and iPad

    How do you change how pages are turned with and iPad?

    Hi: Try the Apple link below
    http://www.apple.com/support/ipad/getstarted/
    Stedman

  • How can i turn off Find My iPad without using the iPad?

    My swipe screen has stopped working completely on my iPad. Very disappointing as it is only 18 months old and has been well looked after! I have tried holding down the off/on button and menu button to reboot but this doesn't work. I have now logged the fault with Apple and have an appointment to see someone in the support team this Monday. However, I wanted to try one more thing. I want to restore to factory settings as I've read that this could resolve the problem. When I plug it in to iTunes and try to restore iPad i get a warning message telling me I need to go to iCloud settings on my iPad and turn off Find My iPad before restoring. As I cannot use the iPad I cant do it from there. Is there another way? Please help me, I want to weep!

    FORCE IPAD INTO RECOVERY MODE (this will disable Find My iPhone)
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.
    3. Repeat the process if necessary.

  • How do you turn third-party midi loops into Apple Loops?

    Does anyone know how to turn third-party midi loops into Apple Loops? I've got hundreds of short midi files that I purchased, and I would like to be able to use them in the loop browser of Logic Studio. I tried some of the obvious ways of doing this, like using Apple Loop Utility, but it doesn't seem to recognize .mid files. Seems like .mid files would be right up its alley, so maybe I'm doing something wrong...

    Yes, have the same problem but with wav loops. i have 75000 wav loops from third part and do not find how to "logicized" it. For the moment i can use them into a project but they are not adapting when i change the bpm of the projetc for exemple.
    If you know the solution i would be rescued

  • How do I plug a non-USB microphone into a Mac Pro?

    Question from an audio newbie....I've got a 2009 Mac Pro desktop computer. I just bought a microphone headset. The headset has a two-pronged plug in, a green one for the headset (speakers) and a pink one for the microphone. My Mac Pro has two speaker ports - one in front and one in back - but I can't find anyhwere to attach the microphone plug.
    I don't want a USB headset because my USB ports are already maxed out. How can I attach this non-USB microphone and get it to work?

    Look at your back side. Look at the booklet too that it came with or from support page manual.
    www.apple.com/support/macpro
    there are digital out audio and microphone on the backside.

  • How can I import a non-BC site into BC, using Dreamweaver CC, and then use it as one of my free sites?

    I am trying to import one of my non-BC sites into BC, using Dreamweaver CC, and then use it as one of my free WebBasics sites.
    When I try to create a new BC site in Dreamweaver CC, it creates a BC template site, and I have unsuccessfully tried to update the files on BC - it won't let me connect.
    If I import the site from my portal, I don't get the option of a free site - when I try to upgrade, I get the credit card form asking for payment.
    I feel like I'm running around in circles with one foot nailed to the floor.
    Any tips?

    Thank you for your quick reply and for clearing up my confusion.  I'm exporting the first section now.  I choose the smallest size, 3x4 but I'd prefer to go higher as this DVD was originally a VHS home movie.  I'm wondering if after three conversions (VHS,->DVD->MPEG) the resolution will be so poor as to not support a larger size frame?  If it can, what size should I select when I export? 

  • TS1702 How do you turn off iCloud on iPad?

    I have a game that I purchased, that I need to reload from the vender. When I go to purchased games after deleting the game. It comes up as being on the iCloud and not vender site. How do I delete it from the iCloud so I can reload from the vender.  Forgot to mention the reason to reload. When typing in the game my iPad resets itself.

    Deleting the account will only delete it from your iPad, not from iCloud.  If you want to delete the account and keep your data on your iPad, first go to Settings>iCloud and turn all data that is syncing with iCloud (contacts, calendars, etc.) to Off.  When prompted choose to keep the data on the iPad.  (If you are syncing iWork documents with iCloud, also open your iWork apps and turn off iCloud syncing and choose to keep the documents on your iPad.)  After everything is turned off, scroll to the bottom and tap Delete Account.  Your data will remain on your phone.  If you ever want to re-use your iCloud, just go to Settings>iCloud and sign back in.

Maybe you are looking for

  • Sales Orders for Projects

    I have some strange situation with reports: CN54N - shows no data CN55N - shows data CNS54 - no data CNS55 - no data Same time there are Sales orders created with WBS account assignment. Any ideas?

  • How to maintain a common document in solution manager

    Gurus , we are in the process of configuring service desk . One major type of support message we receive is user creation /modification . currently we maintain these details in an common  excel sheet .  if a new  requirement is made they take the lat

  • User exit -Note 103678 : ALE Transfer terms of Payment

    Hi, We are using Inter--company STOS and intending to use ALE to automatically post the Intercompany A/P MIRO created off of the P.O/SD billing Invoice. Base line date was not getting filled and SAP came back saying to check the Note :103678. iisue w

  • How to call exchange rate

    Hi, We are trying to get the value entered by Partner entity in its local currency to the entity currency of another Partner Entity for which I try to pull the exchange rate of the partner entity using the following rule: iEOP_Rate = HS.GetRate("A#Cl

  • Script getting hang while trying to execute update command in python using cx_oracle

    Hi All, My script is getting hang while executing below script and it is not throwing any error. TEMP_PROD_cur=TEMP_PROD_schema_conn.cursor() sql="update APP_DB_CONNECT set DRIVER=:driver,URL=:url where APPNAME=:appname and CONNECT_NAME=:connect_name