How do i turn car multi media on

i finally got my iphone 5 connected to my cars bluetooth however now the music audio wont stream through the blue tooth... i receive a message saying to make sure my car multi media is turned on or within distance...can you connect so both work w/out disconnecting the other?

Now I hope someone knows how to help you with this issue, but I did want to mention that even though it makes no since, some folks have said they had to purchase one song on iTunes and then their Bluetooth auto pairing worked for all functions.  Believe me, I hate even typing this, but the threads are out there somewhere saying it worked for them.

Similar Messages

  • Bluetooth won't pair both audio and phone. Car multi-media in range and turned on?

    I have iOS 8.1.3.  Can no longer use both phone and audio- it disconnects one to pair the other and doesn't allow both. Error message says make sure car multi-media is turned on, in range, and ready to use.

    Thanks Peter! I had done  that before multiple times with no success- even turning off bluetooth and the phone in hopes for a reset; I called Apple and my rad service person Shaquita requested I turn off my wireless, reset my network, and try again. That worked and both the audio and the phone paired. Have a great day! Hopefully this helps others with the same issue; but I understand that the bluetooth may kick out again and I may have to repeat this process. Kind regards, Angela

  • How can i turn off the media player shortcuts on the f keys on the envy 17?

    how can i turn off the media player shortcuts on the f keys on the envy 17?

    If you press the Home button and open Security, you can change "Auto Lock Device" to "Never". Does that do what you want?
    Edit: I see you found the solution the Software board in this thread: http://forums.palm.com/palm/board/message?board.id=software&thread.id=13064
    Message Edited by Jeffro on 12-16-2008 12:00 AM

  • How do I turn off Multi-Pass?

    I am having a big problem with the iTunes Store.  I purchased the Jon Stewart Show on iTunes back in September, I believe.  I only wanted to purchase one "set" of shows, but somehow I've been signed up for an auto-renewal.  We ended up purchasing Hulu Plus, and were able to get the Jon Stewart Show on Hulu, so I didn't need the other subscription.  However, it keeps charging me, and there is NO WAY to stop the downloads nor to request a refund. 
    I did finally find the auto-renewal buried in the "Passes" section, which is NOT intuitive.  However, I can't find a way to request a refund.  I tried the "Report a Problem" button on the bottom, but it just kicks you back to the iTunes Support page on the website.  It does NOT let you do much of anything after that. 

    Also, Apple Support (Express Lane) told me to go to my Account Info page, then go to Subscriptions to turn off Auto-Renewal.  The only thing listed on mine was the Hulu Plus.  I couldn't find the option to turn off the Daily Show, and had no idea it was called a "Multi-Pass."  Even so, that didn't trigger me to look under the "Passes" section of My Account...because I had no idea that's what it was called.

  • I am unable to get my bluetooth working message says "make sure car mutli media is in range" how do I get connected?

    I am unable to get my bluetooth working on my phone. the message says "make sure car mutli media is in range" how do I get connected and what does that mean?

    Have you tried a soft-reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • HT1816 How do I turn auto-renew off for my multi-pass using my iphone

    How do I turn auto-renew off for my multi-pass using my iphone

    Anserwed in your other post on this Topic...
    https://discussions.apple.com/message/22415340#22415340
    See the first Link I posted...
    iTunes Store: Purchasing and managing auto-renewing subscriptions

  • HELP...HOW DO I TURN ON MEDIA TRANSFER PROTOCOL

    I recently purchased the 8350i smartphone, and am trying to download subscription songs from Rhapsody.  I am being told by Rhapsody that I need to turn on media transfer protocol.  I went to options/memory and mtp is not located there.  How do I turn on media transfer protocol?

    It would be at Options > Media Card.
    Normally, a red lock icon such as you describe would mean that has been disabled by your corporate BES admins. 
    Are you on a BES?
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • How do I reinstall missing Adobe Media Encoder CS3 ?

    I need some help here ??
    When attempting to encode on Vista from Premiere 3.2 the Adobe Media Encode (AME) just goes off and hangs.
    Looked for the error log which lives at
    C:\Users\user\AppData\Roaming\Adobe\Adobe Media Encoder\4.0\AMEEncodingErrorLog.txt
    Make sure you have view hidden files turned on to look for this file..
    Ok the folder "Adobe Media Encoder" is not on my machine... It looks like the installation is FUBAR.
    I check CS3 Master Collection distribution - I don't see a module for Adobe Media Encoder to reinstall.
    So my question is . How do I reinstall the "Adobe Media Encoder" for the CS3 collection ?
    Anybody have a clue as how to do this ?
    How do I reinstall the Adobe Media Encoder CS3 ?

    Mr Hunt...
    I my view you're a wizzard with statute more than Merlin...
    Here's what I found. Last time I shut down ProPre I was on a dual monitor.
    I tossed my laptop in the car went to 2nd location.
    Re-configured laptop for single monitor mode.
    Upon starting up ProPre hammered encoding and the resulting screen opened ...... which I could not see.
    PrePro DOES NOT sense hardware.... Dhaaaaaaaaa
    Its stays stuck in dual monitor mode !!!!!
    You need a second monitor to unstick it !!!!!
    I was unable to set it back to single mode without the 2nd monitor !!!
    Yahhoooo !!!! Its working again !!!!!
    Dhaaaaaaa

  • How do you turn off in app purchases

    My son was playing the free app download Restaurant Story and made a lot of in app purchases. I don't know how he made the purchases or how you can legally  charge somebody for playing a game that is marked FREE. Does anybody know how to turn off "in app" purchases?

    Assuming this is an iOS device (iPad, iPod Touch, iPhone, etc):
    Find and click on the Settings icon
    Select General from the list on the left.
    Scroll down on the right until you see Restrictions. Click on it.
    At the top, click where it says 'Enable Restrictions'.
    It should come up with a box that says 'Set Passcode'. Enter a 4-digit number (you can use the letters to remember it). Keep it as unguessable as possible, but something you can remember. You'll have to enter it twice to confirm.
    Scroll Down to the 'Allowed Content' section. Turn OFF the slider next to In-App Purchases. It should not show 'OFF'. That will take care of the In-App Purchases problem.
    I highly recommend looking at the other restrictions in the same section - you can restrict Safari, for example, if you want to restrict you kid's web surfing, and set age-level restrictions on music, videos, movies, apps etc. You can also turn off multi-player games and the function for Adding Friends.

  • How do I turn off the feature that allows the duplication of App downloads to more than one phone? As in my wife downloads an app and I get a dulpicate download on my phone.

    How do I turn off the feature that allows the duplication of App downloads to more than one phone? As in my wife downloads an app and I get a dulpicate download on my phone.

    To disable that feature it will depend on whether or not you sync everything in the cloud using Apple's iCloud, OR if you both use the same desktop/laptop computer with iTunes. Here is a link to the Apple support page in regards to the automatic download feature included with your iPhone and corresponding softwares such as iTunes.
    http://support.apple.com/kb/ht4539
    Follow those instructions and it will all be taken care of.

  • HT1364 I have moved my library to an external hard drive and changed the location of the iTunes media folder in Preferences, but every time I close and re-open iTunes, I have to do it all over again.  How can I make the iTunes media folder change permanen

    I have moved my library to an external hard drive and changed the location of the iTunes media folder in Preferences, but every time I close and re-open iTunes, I have to do it all over again.  How can I make the iTunes media folder change permanent?  I have an older machine with Windows XP.

    I don't believe mounting the hard drive should be necessary, unless you have several external drives and want your computer to recognise them as folders, rather than drives. I've never had to mount a hard drive, ever. If you don't know how to do it, then it shouldn't be necessary now.
    Try this:
    Prepare iTunes so that it can see the external drive.
    Make a note of which drive-letter the external drive has been allocated. (Look in Windows Exploer)
    Look at the file location for a song. Make sure it plays (and therefore that iTunes has found it). Highlight it and select File/Get Info/Summary>Where: and make a note of the drive letter for that song.
    Close and shut down the computer.
    The next time you turn the computer on again, connect the external drive
    Before you start iTunes - check the external drive in Windows Explorer. Is it ready, does it have the same drive-letter that it had last time? Can you go into the drive and see the files on it?
    Once you can, start iTunes. (If the drive lettter has changed, you need to work out why before going any further.)
    If iTunes fails to find your external drive, you need to check where iTunes is looking for your Library.
    Select the same song you checked before (presumably iTunes can no longer find it). Follow the procedure for locating it. You should be able to see where iTunes thinks the file is. It's the drive that counts. Which drive letter is iTunes looking at? Is it the same one that it was previously (which should also be the same one that the drive has now).
    What happens, which step do you have problems with?
    Message was edited by: the fiend

  • How can I turn-off the apps which I have opened once in ISO 7.0.2. In previous version of ISO it was easy to turn- the opened apps by double clicking on home button and then click and hold on respective apps then click on cross sign.

    How can I turn-off the apps which I have opened once in ISO 7.0.2. In previous version of ISO it was easy to turn-off the opened apps by double clicking on home button and then click and hold on respective apps then click on cross sign but in this version I could not do so and my iPad appears slower.

    Close inactive apps
    1. Double tap the home button to bring up the multi-tasking view
    2. Swipe the app's windows upwards to close
    3. The app will fly off the screen

  • How do I turn off the Ipod Charging Tone?

    Firstly please don't say by turning down the sound slider because if I do I can't play the music on my ipod whilst it's charging.
    Right the situation is that my iPod touch is connected via usb in my car so I can play music on the move, also as a bonus my iPod is charging at the same time, but here's the problem because it is charging not only do I get the music from the iPod I also get the annoying charging tone through the speakers. I can't find a setting for this specific tone in the settings, and searches would suggest that it can't be turned off. I do hope this is not the case becasue if it is it's madness. Also if I connect via aux cable if the usb is connecting ie the iPod is charging I still get the charging tone trilling it's merry way.
    How can I turn off this tone. I know I can disconnect the usb ie stop the charging but that defeats to object as I then gradually use up the power meaning on long journeys I have to either dispense with the iPod or put up with the tone. Also when I get to my destination instead of having a fully charged iPod I am already down on power.
    HELP?

    Okay, well I'm still not aware of any iPod which repeats the charging tone. Have you checked in the Connector recess of your iPod to make sure there is no muck in there, or that there is no damage to the connector pins? This is because I still think that the connection between the cable, dock or whatever and the iPod is not staying "made". In other words, the connection is disconnecting and reconnecting and every time it reconnects, the beep sounds.
    Can you watch the iPod's display? When charging, the battery symbol shows the lightning bolt or, when full, the plug in the battery. Does that change to the battery only just before the charging beep? If so, that suggests that the connection is being repeatedly broken and re-made. Also check the cable (just in case).
    If you cannot solve this I think there are two options available to you.
    Ask any of your friends (who have an iPod Touch with the same iOS version on it) if their iPod does the same as yours; if they are aware of a setting for this and if so, how to turn it off, or; 
    Make an appointment at the Genius bar of your local Apple store and see if they can sort this out.
    Like you, I do not see the "change with buttons" option mentioned by kartabyaa, although I only have iOS 4.2.1 on my Touch. (I don't believe the iOS version is different to mine in this respect, but if you ask someone with the same iOS version as you, that should help confirm or refute what the iPod can and should do.)
    <Link Edited by Host>

  • How do i turn off the feature so that it stops speaking all of my playlists

    how do I turn off the feature on my ipod so that it stops speaking all of my playlists

    To disable that feature it will depend on whether or not you sync everything in the cloud using Apple's iCloud, OR if you both use the same desktop/laptop computer with iTunes. Here is a link to the Apple support page in regards to the automatic download feature included with your iPhone and corresponding softwares such as iTunes.
    http://support.apple.com/kb/ht4539
    Follow those instructions and it will all be taken care of.

  • How do I turn on my ipad, I just got it and I don't know how to get to the home screen. Also, is itunes free on the ipad

    How do I turn on my ipad, I just got it and I don't know how to get to the homescreen. Everytime I turn it on there is a black screen, the white charger, and the blue itunes circle. Also, are itunes free.?

    You must activate the iPad within iTunes on your computer. Make sure you have the latest version of iTunes on your computer (read the minimum requirements for the iPad printed on the iPad box) and connect the iPad to your computer with the supplied cable to a 2.0 USB port - not a port on a hub- a port on your computer. iTunes should start and take you through the process.
    iTunes on the iPad is a store where you purchase media - it is not the music player. The iPod app is the music player. Both apps are pre installed on the iPad.

Maybe you are looking for

  • Payment Terms in Sales Transaction...!

    Hello, I am basically an SD consultant. I am not familiar with CRM much. I have an issue with the Payment Terms in a Sales transaction. It shows different Payment Terms at header and different at item. There is nothing in a Docuemnt's change log. May

  • ORDER BY on SQL Server

    I just switched a site from Access to SQL server. I have a page that in Access used a ORDER BY statement that referenced a QueryString variable. But when I try that on SQL Server, it's saying that it only supports variables that reference a column na

  • Ssi issues with nested table

    Hi ssi newbie question here. I wanted to include an ssi section in a embeded table layout, have used the ssi include code and inserted it where i want the ssi to work etc . So the it works which is nice but when you look at the physical page in dream

  • In OSB, how to poll message from DTAQ(data queue in AS400)??

    Hi, In our OSB project, I have a data queue(AS400) in proxy side and Oracle AQ at business side, I can easily connect to Oracle AQ, but I am not able to understand how to connect with DTAQ (data queue). Is there any adapter supporting DTAQ  for OSB.

  • [SOLVED] tilda won't work with openbox autostart

    I tried to start tilda with ~/.config/openbox/autostart. I can see tilda among the processes but pulldown key has no effect. Tilda works when starting from terminal with the following error messages: tilda:28274): Gtk-WARNING **: Unable to locate the