How do I turn off  all those visual effects when I play music?

I dont really want or need those special effects when I play music.(All that panning in or mirroring of the album artwork, sometimes it even switches sides!) I would even prefer to see the Artwork of the music being played, but perhaps just smaller and static on the moniter screen... All this beautifull technology is just wasted on me! How can I deactivate this feature?

Sorry to say you can't disable it.
The swinging artwork gets tedious after a few minutes - more relaxing to turn the TV off!
I generally set the album artwork screensaver to kick in after a few minutes - it's a more relaxed screensaver than the currently playing album effect, but some more options during playback would not go amiss, particularly an iTunes like visualiser.
I think on balance that's better than only having a static image option as there are risks of screen burn especially for plasma owners with static images (my LG LCD TV even gets image retention issues with satellite channel logos!)
AC

Similar Messages

  • How do I turn off 'All' the photo stills in iMovie 11 without having to turn off each one?

    How do I turn off 'All' the photos in iMovie 11 without having to turn off each one?

    Hi AppleMan 1958,
    Sorry I was typing too quickly ....
    It should have said: "How do I turn off the 'Ken Burns' effect of all the photos without..."etc.
    Having read another comment on this forum, I think I have the answer.
    By going to File>Project Properties, and then turning off the Ken Burns effect.
    Don't know how you feel about iMovie 11, but I think its pretty awesome don't you think?
    Thanks for pointing out my stupid question!
    Kind regards,
    Bob

  • How do I turn off all of the notifications? They are so annoying.

    How do I turn off all of the notifications on iPad mini? All of them at once. They are so annoying. And it's annoying to go to preferences and put off the notifications for every app. When I instal any app it asks me - do you want to recieve notifications? I say no, but almost every app does the notifications.
    P.S.
    I wish to **** someone in apple for this annoying thing. Please tell me how to turn this annoying thing off.

    Settings>Notification Center>INCLUDE>Turn off everything

  • How do I turn off ALL time zone, location support?

    How do I turn off all location support in iCal.  I travel a lot and I'm tired of iCal changing my appointments when I change time zones.  I've missed two so far because of it.
    TIA
    D

    Nothing???

  • How can i turn off all the mails that i recive when use any program form my iPad?

    How can i turn off all the mails that i recive when use any program form my iPad?

    Everytime i use the my ID recive an e Mail to inform me.

  • How do i turn off all sounds on iphone 5

    how do i turn off all sounds on iphone 5. I mean all sounds

    Turn your phone off.
    Also, read here:
    http://www.gottabemobile.com/2012/01/25/how-to-completely-silence-your-iphone/

  • How can i turn off all this adds I've been getting?

    how can i turn off all this adds I've been getting on safari/google.?

    Click here and follow the instructions, or if they don't cover the type of adware on the computer, these ones. If you're willing to use a tool to remove it(you don't need to, but may find it easier), you can instead run Adware Medic; this link is a direct download.
    (118001)

  • How do I turn off all clip audio so only music track is heard?

    How do I turn off all audio that is with the original video track so that only the audio soundtrack music will be heard?

    Add the clip then click the gear icon on the clip and choose Audio Adjustments… reduce the volume to zero. - JamesJM

  • BT Feestyle 650- How do I turn off all ringtones

    How do I turn off all ring tones as I need to have no sound when I sleep, yet need to pick up voice-mail
    I have turned off sound on the handset on internal and external sound on both phones yet there is still a heard ring?
    Thank you

    Welcome to the forum. Have you turned off the base ringer?
    You can click the white star next to this message if you think it was helpful.

  • On iMovie forums, how do I turn off all notification sent to my email about new postings?

    on iMovie forums, how do I turn off all notification sent to my email about new postings?

    Log in,
    go to the top right of the screen and click once on "Your Stuff"
    There you should see a menu with "Notifications"
    Click on that and adjust your notifications.

  • How do I turn off background ni file activity when not using Labview? files such as nimxs.exe, nipalsm.exe, nipalsm.exe, nisvcloc.exe, nicitdl5.exe

    How do I turn off background ni file activity when not using Labview? I use labview rarely, and I also use my computer for demanding multimedia applications, including multitrack digital audio recording. I need to reduce as much background activity as possible, and taking a look with task manager I see files such as nimxs.exe, nipalsm.exe, nipalsm.exe, nisvcloc.exe, and nicitdl5.exe running even when I haven't used Labview (8 I believe). These files run even after I right click the NI icon on the lower right and turn off the application. I would like the computer to boot up without these files, and for the necessary files to be activated only when I start the program.
    Can this be done or do I have to remove labview from the system to improve performance?
    Thanks

    Hello, those processes are part of running NI services that start when Windows boots.  These processes serve varied purposes and stopping them can have undefined and unknown consiquences for your NI products.  These products run at "normal" priority meaning that they should be preempted by any process running at a higher priority which I would expect your other application to be doing given their time sensitivity.  That being said, in Windows XP (I can't speak for other OSes), you can lower their priorities even greater through task manager (right click the process»set priority) to further remove them from contention for resources.  If you want to prevent them from running you can set the service startup type to "manual" in Control Panel»Administrative Tools»Services.  Right click the process go to Properties and Under the General tab choose Startup Type»Manual.  This will start up the processes only when something directly starts it up.  LabVIEW will start these processes up as it attempts to use them.  When you shut down LabVIEW you will need to manually shut down these processes through task manager.  Again, doing this can cause problems with your NI products on your system and it is not advised.
    Travis M
    LabVIEW R&D
    National Instruments

  • HT5594 why in spite of i turn off all of location servies when i turn on cellular data use data again ?

    why in spite of i turn off all of location servies when i turn on cellular data use data again
    in cellular >>system services >> mapping services
    how can i turn off mapping services completly ??
    & why now it use data until i turn it off ???

    Settings>Cellular>Use Cellular Data for and turn Maps off. If you are not using Maps for navigation, it's not using data, though.

  • How do I turn off Private Browsing in Safari when there is no choice in the Settings app?

    How do I turn off Private Browsing in Safari when there is no choice in the Settings app?

    To turn on private browsing, tap Safari, then tap in the lower-right corner. Tap Private to turn private browsing on.
    Note: If you're using an iPad, tap , then Private.
    Tap again > turn off private.
    http://support.apple.com/kb/ht1677

  • How do you turn off the auto select behavior when working with shape layers?

    How do you turn off the auto select behavior when working with shape layers?
    I am using either of the path selection tools to select only some of the paths on the layer. I have the proper layer targeted. I have the selection too auto select option turned off.
    If another layer has a path in that area, that layer becomes auto targeted and I get the wrong path. Turning off the layer is the only way to avoid this but then I have to  turn on the layer back on between making my selection and transforming to use the other layer as guide. Is there any way to stop this auto select? Locking the other layer does not stop the auto select, just prevents editing.

    As far as i know the move tool options don't have any effect on the path selection tools.
    You might try clicking on one of the path points or on the path itself with one of path selection tools and if you want to select multiple points
    you can shift click with the Direct Selection Tool or Alt click to select the entire path.
    more path shortcuts:
    http://help.adobe.com/en_US/photoshop/cs/using/WSDA7A5830-33A2-4fde-AD86-AD9873DF9FB7a.htm l
    http://help.adobe.com/en_US/photoshop/cs/using/WSfd1234e1c4b69f30ea53e41001031ab64-7391a.h tml

  • TS2755 How do I turn off that lady's voice when I text?  She says the words that I'm texting.

    How do I turn off that lady's voice when I text?  She says the words that I'm texting.

    mininger wrote:
    Do you have iphone 6?  I do not have a auto voice text off.  Just VoiceOver.  I turned that off but it does not solve the problem.
    I highly doubt that ElShegal had an iPhone 6 back in August of 2013.

Maybe you are looking for

  • Pricing procedure for Depot Sales(CIN Version)

    HI, Can anyone explain me TAXINJ and The Pricing procedure for Depot Sales(CIN Version) alongwith the Condition Types like JMOD,JECS,JECX etc. Points will be given Regrds, Binayak

  • Very slow queries when using oracle spatial

    Hi, I am new to oracle, please help with me the problem that I am facing. I am storing spatial regions inside the data base. The data is in very simple in form. That is each region is a small rectangle. The boundaries of rectangle touch each other bu

  • CR 8.5, I need to count the number ordered and the number on back order

    - - Crystal Reports 8.5 - - I have two fields. Qty Shipped and Qty Backordered. I want to calculate the percentage of orders shipped. Something like: Count ({CIT_PT_RO_Fulfillment;1.QtyShip}) > 0 Count ({CIT_PT_RO_Fulfillment;1.QtyBackorder}) > 0 But

  • Need guidance for dba certification

    Hai frnds, I am new to the forum,I completed my Msc(comp) and joined as a trainee in one MNC company and they given training on Datawarehousing ETL tool (datastage) now iam working as a developer on datastage. and what my question is,i want to become

  • Keeping nav bars highlighted while using Pop-up menus

    How do I get navigation bars to stay highlighted while the mouse is over the pop-up menu in Dreamweaver 8 and Fireworks 8. I found directions on the Adobe Website, but it only works for the MX versions, as the codes are different. Navigation bars and