How do I turn off dashboard client to load Adobe update

I am trying to down load the latest Adobe Flash update, but it stops and says to turn off dashboardclient. How do I go about that.

The problem is down loading Adobe Flash. It stops and the message comes up turn off dashboard.

Similar Messages

  • How can I turn off the daily nagging about software updates?

    How can I turn off the daily nagging about software updates?
    I am _very_ annoyed at having to answer this every day, day after day after day.

    Thanks, PJRS.
    But if I'm reading that right, the only way to get the nagging to stop is to accept all the download that Software Downloads suggest. 
    Quite often it pertains only to software I never use. In these cases, I'm not interested in downloading it.
    And also -- if I'm understanding that document -- I have to respond every time the nagging drops down (at least once per day).
    99% of the time I have no desire to download the suggested software.
    In ANY case, it is outrageous that the software resorts to harassing a customer without at least a readily visible means to turning it off
    SO -- please let me know what I'm misunderstanding -- thanks..

  • I have Photoshop cs5, version 12.0.5.  I keep being offered an "Update" to 12.0.4 and am puzzled.  How can I turn off this offer or should this update be applied?

    I have Photoshop cs5, version 12.0.5 x32 installed on a Widows box.  I keep being offered an "Update" to 12.0.4 and am puzzled.  How can I turn off this offer or should this update be applied?  If it should be applied how to do it.  When I try it, the update fails.
    Thanks!

    I found the answer in another forum thread...

  • How do you turn off apps with the iOS 7 update

    how do you turn off apps with the iOS 7 update

    Double tap the home buttons and swipe upwards on the preview of the App (not the App Icon).

  • How can I turn off dashboard from middle click on magic mouse?

    As the title says:
    Whenever  I have a gesture set up on my magic mouse to hit middle click, it automatically does the dashboard. This I don't want, and I cannot for the life of me work out how the **** to disable the dashboard from middle click.
    Any help?
    Suresh

    I was getting the same problem, I have Jitouch installed, but that really wasn't the issue, it was a setting in the system preferences as sureshk mentioned. It took me a little bit to figure out where the setting is located in case someone else has the same issue.
    System Preferences > Expose & Spaces (Snow Leopard & earlier) or Mission Control (Lion & later)
    The keyboard and mouse shortcuts are at the bottom. My "Show Dashboard" was set for F12 and Middle Click

  • How do i  turn off iPhone 6 so is can update software

    trying to update iPhone6 just apple screen

    if the iPhone has hung on the Apple screen and will not restart, hold the home and power/sleep buttons for 10 to 15 seconds., This should reboot the iPhone and let the update continue.

  • How do I turn off MAIL application as DEFAULT ?

    Can anyone suggest how I can TURN OFF the MAIL application from opening as an automatic default whenever I click on "contact us" on a web page, so that MAIL does NOT automatically open ? I prefer nothing to open automatically ! If anything I'd like a dialog box asking me what application I want to use.
    WHY ? Because I have great problems with MAIL, after a disastrous failed installation (and removal) of Safari 4 in 2009. Since then Safari works fine but I never use MAIL as when I do it crashes my whole system every time so I ignore it totally. However, when a web site's link "more info" triggers MAIL to open, I am lead down the merry and frustrating (!!!) path of having to recover from a crash. I'd like to avoid this once and for ever. Any ideas ?
    THANKS !

    Niel, That's exactly what I want to do: change or turn off the default email client so MAIL (apple's mail program) does not open by default. But I can't find a way of doing that, certainly not in "system preferences". I used spotlight to find "RCDefaultApp" and nothing exists by that name, or RC Default et al...

  • How do I turn off autosave osx lion

    How do I turn off autosave on osx lion? Just got new MacBook pro & autosave crashes Photoshop adobe when I'm doing large format design! This is a designers worst nightmare having autosave. Because you can do some work, then change your mind , but it's too late, autosave has saved over your work! Great for small files like text, but design large files? If you can't turn off autosave then apple can kiss goodbye to all it's design clients which is alot of there buyers I would imagine. Can you turn it off please help?

    I have no way of knowing what Apple will do in the future. You can certainly report you wishes at
    Apple Feedback.
    As for "oversight," I'd say it was yours, not Apple's. Should have done a little more research before you purchased. This "issue" is nothing new.

  • How Do I Turn Off UNISON.LOG

    How can I turn off the UNISON log on the Windows calendar client? I'm using the 9.0.4 client. Can I add something to the UNISON.INI file?
    Thanks,
    Ed

    I found this info at the following web site:
    http://www1.umn.edu/umcal/support/GuideBook/Install-Windows.html
    6. Hiding the unison.log file
    Desktop Shortcut
    When starting the Oracle Calendar desktop client using a shortcut you have created, a file named unison.log may appear on the desktop.
    This log file can be useful for troubleshooting. Instead of deleting it or letting it clutter your desktop, you can have the information saved in your Oracle Calendar directory by following these steps.
    1. Right-click on the shortcut you use to start the calendar client and
    select Properties from the contextual menu.
    2. In the properties window change the "Start in:" location to:
    "C:\Program Files\Oracle\Calendar"
    3. Click OK to save the changes.
    4. Delete the unison.log file from your desktop,
    or you can move the file to the "C:\Program Files\Oracle\Calendar" directory.

  • TS3988 How do I turn off iCloud and go back to the way I had it before?

    I am unhappy with iCloud for a number of reasons. I want to go back to backing up my music to an external HD, storing music on my devices, and turn off iCloud.
    How do I turn off iCloud? I have iTunes on a PC.
    THANKS

    Current Firefox versions remember the download directory based upon the URL, so if the URL changes then the default folder may be chosen if there hasn't been selected a download folder before for that server.
    *[[/questions/889958]]
    *[[/questions/882443]]
    Bug 536503 - Last downloaded-to directory should be remembered on a site-by-site basis
    Firefox 11 will have a workaround by providing a pref (browser.download.lastDir.savePerSite) to disable this feature.

  • Every time I start iTunes I get the message: "iTunes exec has been set to run in compatability mode for an older version of Windows. Turn off compatability mode for iTunes before you open it." How do I turn off the compatability mode?

    Every time I start iTunes I get the message: "iTunes exec has been set to run in compatability mode for an older version of Windows. Turn off compatability mode for iTunes before you open it." How do I turn off the compatability mode? Particularly when I have to do it before I turn on iTunes.

    Try the following document, only be sure that none of the boxes in the compatibility mode tab are checked (not just the compatibility mode box itself):
    iTunes for Windows: How to turn off Compatibility Mode

  • How will you turn off an IPhone 4S voice over with the latest IOS

    How will you turn off Voice Over in Iphone 4S? i tried turning it off through settings/accessability/voice over but when i turned it off it always go back to ON. It is very depressing to go over with this feature. Thanks.

    on your phone go to settings - icloud - find my iphone - off

  • How do I turn off the feature that allows the duplication of App downloads to more than one phone? As in my wife downloads an app and I get a dulpicate download on my phone.

    How do I turn off the feature that allows the duplication of App downloads to more than one phone? As in my wife downloads an app and I get a dulpicate download on my phone.

    To disable that feature it will depend on whether or not you sync everything in the cloud using Apple's iCloud, OR if you both use the same desktop/laptop computer with iTunes. Here is a link to the Apple support page in regards to the automatic download feature included with your iPhone and corresponding softwares such as iTunes.
    http://support.apple.com/kb/ht4539
    Follow those instructions and it will all be taken care of.

  • How do I turn off computer monitor when watching DVD movie on TV monitor?

    I think this is really a Leopard question because it involves setting up 2 monitors in System Preferences within OSX. 1) I have a wide screen TV connected to my iMac (Intel White Late 2006) through the Mini-DVI port and a separate audio cable. This connection works fine. 2) The purpose of the TV screen is only to watch DVDs using the DVD player and iDVD in my iMac. 3) In System Preferences->Displays->Arrangement, both my computer monitor and the TV screen appear as separate monitors. I have the setting to mirror each other. With this setting, the DVD movie plays on both the iMac computer screen and on the TV screen. 4) FINALLY, MY QUESTION: When watching a DVD on the TV screen, I would like to turn off the monitor in my iMac so that the screen is dark (in sleep mode to save power, etc.); I want only the TV screen to display the movie. How do I turn off only the iMac screen? Thank you. Dale

    Dale H. Eckerman Jr wrote:
    I think this is really a Leopard question because it involves setting up 2 monitors in System Preferences within OSX. 1) I have a wide screen TV connected to my iMac (Intel White Late 2006) through the Mini-DVI port and a separate audio cable. This connection works fine. 2) The purpose of the TV screen is only to watch DVDs using the DVD player and iDVD in my iMac. 3) In System Preferences->Displays->Arrangement, both my computer monitor and the TV screen appear as separate monitors. I have the setting to mirror each other. With this setting, the DVD movie plays on both the iMac computer screen and on the TV screen. 4) FINALLY, MY QUESTION: When watching a DVD on the TV screen, I would like to turn off the monitor in my iMac so that the screen is dark (in sleep mode to save power, etc.); I want only the TV screen to display the movie. How do I turn off only the iMac screen?
    That's impossible. It can only be done on a laptop but not on an iMac.

  • I was trying to make a new screen recording using quicktimeplay, but when I watched the video after recording it all I could hear was me talking while the video was showing on the screen. How do I turn off that recording and turn the right one on? thanks

    I was trying to make a new screen recording using quicktimeplay, but when I watched the video after recording it all I could hear was me talking while the video was showing on the screen. How do I turn off that recording and turn the right one on? thanks

    Hi j2399123,
    It sounds like your screen recording is doing what it was designed to do, capture what is happening on your screen, with optional voice over with the microphone.
    Screen recording is for recording what you see on the screen, it is not a "video capture" option, like for capturing a movie with sound that is playing on your screen.
    For the QuickTime recording options, check out "Recording with QuickTime Player" in
    Mac Basics: QuickTime Player creates, plays, edits, and shares video and audio files
    http://support.apple.com/kb/ht4024
    And for screen recording specifically, there's
    QuickTime Player 10.x: Record your computer’s screen
    http://support.apple.com/kb/PH5882
    Thank you for thinking of Apple Support Communities for your support needs.
    Nubz

Maybe you are looking for

  • Remote desktop and screen sharing with RMI

    Iam developing an application for screen sharing and remote desktop the problem is a performance problem in the screen sharing application server screen is captured and the image is sent to all connected clients through rmi connection I used JPEGImag

  • Possible bug in iTunes 10.6 - keeps re-syncing songs

    I have several hundred MP3s of very old songs from the 1910s and 1920s which sync to my iPod without problems.  When I acquired an iPhone 3GS with more limited capacity, I set iTunes to "convert higher bitrate songs to 128Kbps AAC".  This worked fine

  • Restoration/Sync Problems

    I've been having major troubles with my iPod 5th gen. When I moved my library from my PC to my Macbook, I restored my iPod, so there is nothing on it now. First, as I tried to sync it on my Macbook, the message "this iPod could not be synced because

  • Setting Default Dashboard for weblogic

    I have migrated from 11.1.1.5 to 11.1.1.6 I have copied & pasted catlog in EM. Issue is I am not able to set default dashboard page to weblogic i get error Exception occured when saving user preferences to catalog access denied for user  to path /use

  • 11.1.5 can't resize window

    In short, the window resize 'grabber' on the lower right of the iTunes window is no longer available. (And dragging the corner doesn't resize it either.) See below. 11.1.5 (5)