How do I Turn off my Optical Disc Drive - Satellite: P745-S4217

I would like to turn off the Optical Disk Drive because the ODD checks for a disc every now and then, very randomly (I can hear and feel the laser tray move around looking for a disc, I can't imagine that it is very good for it to do this so often) and also to save power.
I have read that some (most) computers have Optical Drive power management options where they can turn ons and turn offs setting but on my computer (Satellite: P745-S4217) there is no option for me to change the "Optical Drive power management" once I get into the TOSHIBA Power Saver Settings - I can only change "Cooling Method"
Also, I have options when I right-click on the icon in my taskbar... I can enable "Optical drive auto lock" and then choose between three "Unlock time settings": one, three, or five seconds. But it doesn't change anything.
Thanks in advance for all your help!

So have you tried all the tricks posted online? The best one for me is to take a thin piece of plastic like from a salad container. Fold it over and make two "lips". Insert that into the drive and it will help guide the disc out.
Is your MBP under warranty? Then take it in. Don't void your warranty.
Otherwise use the iFixIt guide:
https://www.ifixit.com/Device/MacBook_Pro_13%22_Unibody_Mid_2012
for the non retina.
Disconnect the optical drive cable. If it's really stuck and you feel up to it you can take the drive out and and take it apart (guides all over the net) to remove the disc.
However it sounds like the disc isn't that stuck so any of those tricks should work.

Similar Messages

My macbook pro won't sleep - if I select sleep it does so initially, then the disc-drive appears to kick in and it comes back to life. It also won't turn off (again, the disc drive kicks in) unless you hold the power-button down for a long period.

My macbook pro won't sleep - if I select sleep it does so initially, then the disc-drive appears to kick in and it comes back to life. It also won't turn off (again, the disc-drive kicks in) unless you hold the power-button down for a long period. Help?

Hi a,
Try an SMC Reset: http://support.apple.com/kb/HT3964

HT1338 how do I turn off optical digital-out port?

how do I turn off optical digital-out port?

Just want to report that I too, running 10.6.5 on a MacBook Pro, had the mysterious " Audio Out Stuck On Optical Digital-Out Port" problem whereby I was unable to adjust the volume on my built-in speakers and they were permanently "muted" because the operating system was sending the audio signal to a non-existent device that it falsely thought was plugged in to my unused headphone jack hole. I thought at first the problem must necessarily be software-based because the built-in speakers worked fine when playing the start-up chimes. So I uninstalled something called "Soundflower" which does some mysterious shenanigans with commandeering the internal audio signal so that one can make audio recordings of one's computers' sound effects. But uninstalling Soundflower had no effect. So I uninstalled some other audio-related software, also to no avail. Then I zapped the PRAM, to no avail.
Then I decided to try what some people call "the toothpick trick," i.e. poking around in the headphone jack hole to see if something was stuck in there shortcircuiting it, and initiating the false signal to the OS.
Bingo! Success!
Actually, I did a hyper-sophisticated version of the toothpick trick:
First, I own a home "otoscope," one of those doohickeys that doctors use to look into your ear. One can now buy amateur versions of otoscopes for home use, to looks for kids' ear infections, etc. (They only cost $30 or so.) Anyway, using the smallest attachment designed for babies' ears, I was able to look (with illumination) into the headphone jack hole and yessiree there was a big bunch of dust stuck way deep in there.
So then I took not a toothpick but instead a slender dental prong-pick thingie made of stainless steel, and very delicately was able to snag the clot of dust deep in the hole at the bottom on the first try. Quite a wad!
Then I took one of those rubber ear-bulbs, used for cleaning out your ears, and used it as a micro-vacuum-cleaner: Squeeze the rubber bulb til it is as empty as can be, then place the tip of the bulb at the entrance to the headphone jack hole, then suddenly release my grip: it ***** air out of the tiniest spaces! After doing this a few times, I then did the reverse and blew blasts of air into the hole.
After all this, I looked back into the hole with the otoscope, and it was sparkling clean! Not even the tiniest speck of dust in an area that just three minutes earlier was thick with dust.
I then turned my computer back on and...problem solved! The audio worked again like normal, and it was no longer detecting an imaginary "Optical Digital-Out Port" device. The internal speakers once again worked as normal, and the volume could be adjusted.
I guess the problem for me really was dust causing a short-circuit. It might very well be the same for you -- so try cleaning out the headphone jack hole as I did.
I'm writing this detailed description to help anyone else in the future with a similar problem.

I have a HDMI connected TV, the HDMI is used for the cable also, I need to use a splitter, but it will only select what is powered on. How can I turn OFF the iTV via the remote?

I just received my iTV and am just setting it up. The Panasonic HDTV only has one HDML imput. The Uvirse box has a HDML output as well as a optical output. I am using an older Bose sound system which works very well.
I purchaced a HDML splitter which will allow me to use both. How do you turn OFF the iTV box when you are trying to watch the Cable?

https://discussions.apple.com/thread/2605624?start=0&tstart=0
thats as much off you can turn it

TS3988 How do I turn off iCloud and go back to the way I had it before?

I am unhappy with iCloud for a number of reasons. I want to go back to backing up my music to an external HD, storing music on my devices, and turn off iCloud.
How do I turn off iCloud? I have iTunes on a PC.
THANKS

Current Firefox versions remember the download directory based upon the URL, so if the URL changes then the default folder may be chosen if there hasn't been selected a download folder before for that server.
*[[/questions/889958]]
*[[/questions/882443]]
Bug 536503 - Last downloaded-to directory should be remembered on a site-by-site basis
Firefox 11 will have a workaround by providing a pref (browser.download.lastDir.savePerSite) to disable this feature.

Every time I start iTunes I get the message: "iTunes exec has been set to run in compatability mode for an older version of Windows. Turn off compatability mode for iTunes before you open it." How do I turn off the compatability mode?

Every time I start iTunes I get the message: "iTunes exec has been set to run in compatability mode for an older version of Windows. Turn off compatability mode for iTunes before you open it." How do I turn off the compatability mode? Particularly when I have to do it before I turn on iTunes.

Try the following document, only be sure that none of the boxes in the compatibility mode tab are checked (not just the compatibility mode box itself):
iTunes for Windows: How to turn off Compatibility Mode

How will you turn off an IPhone 4S voice over with the latest IOS

How will you turn off Voice Over in Iphone 4S? i tried turning it off through settings/accessability/voice over but when i turned it off it always go back to ON. It is very depressing to go over with this feature. Thanks.

on your phone go to settings - icloud - find my iphone - off

How do I turn off the feature that allows the duplication of App downloads to more than one phone? As in my wife downloads an app and I get a dulpicate download on my phone.

How do I turn off the feature that allows the duplication of App downloads to more than one phone? As in my wife downloads an app and I get a dulpicate download on my phone.

To disable that feature it will depend on whether or not you sync everything in the cloud using Apple's iCloud, OR if you both use the same desktop/laptop computer with iTunes. Here is a link to the Apple support page in regards to the automatic download feature included with your iPhone and corresponding softwares such as iTunes.
http://support.apple.com/kb/ht4539
Follow those instructions and it will all be taken care of.

How do I turn off computer monitor when watching DVD movie on TV monitor?

I think this is really a Leopard question because it involves setting up 2 monitors in System Preferences within OSX. 1) I have a wide screen TV connected to my iMac (Intel White Late 2006) through the Mini-DVI port and a separate audio cable. This connection works fine. 2) The purpose of the TV screen is only to watch DVDs using the DVD player and iDVD in my iMac. 3) In System Preferences->Displays->Arrangement, both my computer monitor and the TV screen appear as separate monitors. I have the setting to mirror each other. With this setting, the DVD movie plays on both the iMac computer screen and on the TV screen. 4) FINALLY, MY QUESTION: When watching a DVD on the TV screen, I would like to turn off the monitor in my iMac so that the screen is dark (in sleep mode to save power, etc.); I want only the TV screen to display the movie. How do I turn off only the iMac screen? Thank you. Dale

Dale H. Eckerman Jr wrote:
I think this is really a Leopard question because it involves setting up 2 monitors in System Preferences within OSX. 1) I have a wide screen TV connected to my iMac (Intel White Late 2006) through the Mini-DVI port and a separate audio cable. This connection works fine. 2) The purpose of the TV screen is only to watch DVDs using the DVD player and iDVD in my iMac. 3) In System Preferences->Displays->Arrangement, both my computer monitor and the TV screen appear as separate monitors. I have the setting to mirror each other. With this setting, the DVD movie plays on both the iMac computer screen and on the TV screen. 4) FINALLY, MY QUESTION: When watching a DVD on the TV screen, I would like to turn off the monitor in my iMac so that the screen is dark (in sleep mode to save power, etc.); I want only the TV screen to display the movie. How do I turn off only the iMac screen?
That's impossible. It can only be done on a laptop but not on an iMac.

I was trying to make a new screen recording using quicktimeplay, but when I watched the video after recording it all I could hear was me talking while the video was showing on the screen. How do I turn off that recording and turn the right one on? thanks

I was trying to make a new screen recording using quicktimeplay, but when I watched the video after recording it all I could hear was me talking while the video was showing on the screen. How do I turn off that recording and turn the right one on? thanks

Hi j2399123,
It sounds like your screen recording is doing what it was designed to do, capture what is happening on your screen, with optional voice over with the microphone.
Screen recording is for recording what you see on the screen, it is not a "video capture" option, like for capturing a movie with sound that is playing on your screen.
For the QuickTime recording options, check out "Recording with QuickTime Player" in
Mac Basics: QuickTime Player creates, plays, edits, and shares video and audio files
http://support.apple.com/kb/ht4024
And for screen recording specifically, there's
QuickTime Player 10.x: Record your computer’s screen
http://support.apple.com/kb/PH5882
Thank you for thinking of Apple Support Communities for your support needs.
Nubz

HOW DO YOU TURN OFF "FIREFOX PREVENTED THIS PAGE FROM AUTOMATICALLY RELOADING". I did the "see Advanced - General - Accessiblity. and still having problems

HOW DO YOU TURN OFF "FIREFOX PREVENTED THIS PAGE FROM AUTOMATICALLY RELOADING". I did perform the "see Advanced - General - Accessibility. It worked for me and my "user" site (don't know how to say my site) and still having problems with my wife's. I have gone to OPTIONS → GONE TO → ADVANCE and CLICKED THE LINE → ""Warn me when websites try to redirect or reload the page…""
This did not rememdy the problem. I did try to get on the other site suggested
http://kb.mozillazine.org/Accessibility.blockautorefresh
but got a 404 error...
I have googled the "ff prevented...." and after a number of hours searching I still have not found a fix...
REALLY HOPE SOMEONE CAN HELP ME....
JM

You should still disable this setting:
*Firefox > Options/Preferences > Advanced > General : Accessibility : [ ] "Warn me when web sites try to redirect or reload the page"
The setting in "Options > Advanced > General" is meant as an accessibility feature, as you can see by the label of that section, so that people with disabilities or people who use screen readers do not get confused and is not meant as a safety protection to stop redirecting.
What is the value of the accessibility.blockautorefresh pref on the about:config page?
*http://kb.mozillazine.org/accessibility.blockautorefresh
If you have problems with preferences, see:
*http://kb.mozillazine.org/Preferences_not_saved
Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

How do I turn off messages on my iMac after upgrading to Yosemite?

How do I turn off messages on my iMac after upgrading to Yosemite?

Hi,
Open the Messages app.
Go to the Preferences item in the app's Menu.
Select the account pane in the Preferences.
Each active account should have a tick in the Enable this Account box.
This can be unticked.
This will stop accounts logging in but will not stop the app Launching in certain circumstances.
First of all check the app is Quit before shutting down the computer.
The fact the app is open even if all windows are hidden can cause the app to restart when you Start up the computer.
Messages is a Multiple window app and using the red button on the top left of a window only closes that window and does not Quit the app.
Also check the System Preferences > Users and Groups > your account > Login Items tab.
This will list items that are set to Start up when the computer does.
I have a couple of External Drive on other computers, some Anti Virus software and the common iTunes Helper plus an old version of TextExpander that will work if I launch the Preference Pane this way.
9:44 pm Saturday; October 18, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

How do I turn off "your recent download with your apple id" emails? Annoyingly often and they fill up my inbox.

How do I turn off "your recent download with your apple id" emails? Annoyingly often and they fill up my inbox. Is there a way to unsubscribe from these?

It is in Settings>iTunes & App Stores to change automatic downloads. But it isn't your device that needs to be changed if you are the one that made the download. He needs to turn off the setting for automatic downloads on his phone. I'm guessing here, but you are all sharing the same Apple ID?

How do I turn off email notifications on iPad air

How do I turn off visual notifications in email on iPad air?

Turn off notifications (tap to enlarge image)

How can I turn off the WLS 6.1 security in order to develop my own application-based security module?

Dear Colleagues,
I am currently developing a J2EE application using WLS 6.1.
My team and I have to implement a security requirement to suit our company's needs.
The security requirements are that, users' password need to be aged (30 days maximum) and we need to provided a GUI front-end (JSP) to allow users to change their password when these expire after 30 days.
Our internal contacts in the company, have already taken the lead to find out about whether we will be able to use the WLS 6.1 platform to do this and the answer we got back, was.
Now we need to develop our own security module.
I have 2 questions:
1. How can we turn off the WLS security in order develop our own application-based security module?
2. How can we develop a security module that allows us to age users' password and provide them with facilities to change their passwords when these expire?
At the moment, we are using the default BEA WebLogic login.jsp page and there some configuration in the web.xml for this. I will be grateful if you could advise me on how to turn this default security off so that we can write our own security module.

hi,
1.You can write your own realm in 61 which can plugged for your security
calls.
2. once you write your ownrealm.. you can access it through weblogic
api/ur api..
thanks
kiran
"Richard Koudry" <[email protected]> wrote in message
news:3dd0d081$[email protected]..
Dear Colleagues,
I am currently developing a J2EE application using WLS 6.1.
My team and I have to implement a security requirement to suit ourcompany's needs.
>
The security requirements are that, users' password need to be aged (30days maximum) and we need to provided a GUI front-end (JSP) to allow users
to change their password when these expire after 30 days.
>
Our internal contacts in the company, have already taken the lead to findout about whether we will be able to use the WLS 6.1 platform to do this and
the answer we got back, was.
>
Now we need to develop our own security module.
I have 2 questions:
1. How can we turn off the WLS security in order develop our ownapplication-based security module?
>
2. How can we develop a security module that allows us to age users'password and provide them with facilities to change their passwords when
these expire?
>
At the moment, we are using the default BEA WebLogic login.jsp page andthere some configuration in the web.xml for this. I will be grateful if you
could advise me on how to turn this default security off so that we can
write our own security module.

How do I Turn off my Optical Disc Drive - Satellite: P745-S4217

Similar Messages

Maybe you are looking for