How do I turn off part repeat in record?

Hi this is probably very simple but it's driving me nuts. Every time I record a software instrument part it repeats that recorded part in loop mode until the end. How do I turn this function off? thanks for any help.

Hey Al,
that makes sense for long or live recording (I don't think it puts too much stress on processor).
but as you notice it's not pratical.
There's a white & transparent square around the last number on your session (srcoll all the way to the right) tha's the ending point; it means that the playback and recording stops there, as you know,
it should be a couple of bars ahead of the last note to not cut the reverb tails or delays.
After determining the time you want to record, drag it back to that number, also you can drag the correspondent number under the tempo, say; I'm working on a small song around the 3 minutes, with the project tempo at 120 bpm, 100 bars it's cool for me.
Cheers,
Jorge

Similar Messages

HT5470 How do I turn off song repeat?

How do I turn off song repeat?

While playing the song the word Repeat will appear at the top, second from the right. Touch this and a menu will appear, select Repeat Off

How do i turn off song repeating

i have playlist on shuffle however the same song keeps repeating. how do i turn this off?

iPod Manuals
iPod Models

How can I turn off my screen while recording video?

Hey...I would like to know how can I keep an ongoing video recording while turning off my computer's display?

Energy Saver, you can keep the computer awake while the screen saver shuts the monitor off but I'm not sure that would do it for you.

How can I turn off the repeat at the end of songs in garageband?

I don't want the songs in garageband to repeat when they reach the end. Can I turn this off?

I don't want the songs in garageband to repeat when they reach the end. Can I turn this off?

How do I turn off song repeat?

Ever since I subscribed to iMatch, all my songs repeat unless I manually switch to the next song. I tried deleting all the songs on my iPhone 4 and downloading them from iCloud, but it still does it. Is there some hiddened button I can't find?

Tap the screen with a song playing then tap the repeat button on the left to turn repeat off (white).
See p. 61 of the User Guide.

Firefox tries to connect to broadband when I am already connected to home wifi. How can I turn off this repeated attempt.

I boot my laptop and connect to my home wifi network. When I use Firefox, and am on msn.com or Yahoo.com, a window pops up for a connection to broadband, and it prevents the computer from moving to a link or another website unless I cancel this popup. It happens regularly while I am using Firefox to get to websites.

That is a Windows error message; beyond the scope of this forum. Looks like those two websites are trying to do something unexpected or other than "normal".
I tried to search for info about a 720 error message on Windows 8, most responses included reading the error log to see what "request" was triggering that message. That image shows that logging is enabled, so the answer "we" need is probably in that log. I don't know how to pull up that log myself, much explain how to do that to you.
My suggestion is to try a Windows 8 support forum for help with that.
http://www.eightforums.com/

Tables: how do I turn off repeating heading row?

Hi,
how do I turn off the repeating heading row feature in tables? I've looked through Table Designer and on-line Help but no joy. I know it's probably something very simple but I just can't find it.
Advice appreciated.
Cheers

Also, if you already have heading rows and you are just trying to get rid of them, I think your only option is to delete them. If a heading row contains content that should be in a body row, create a new body row and copy/paste the content into it before deletion of the heading row. I think you can also just copy the whole row, put the insertion point in the body area, then paste, and it magically becomes a body row. Note that you can restore heading rows with the Add Rows and Columns feature.
Russ

How can I turn off messge "Show Preview" and "Repeat Alert" on iPhone 3G?

How do I turn off the messge "Show Preview" and "Repeat Alert" on iPhone 3G? I switched them both to Off, turned phone off/on, but the envelope icon and the message alert still pop up as soon as a message arrives. I need the privacy of not having the person sitting next to me seeing that I just got a message from "Bob."

Well, the iPhone will always alert you when you receive a text message. If you don't want the phone to show "Bob's name" then put "None of your business" in the name for all your contacts so that when you get a text, the person sitting next to you and staring at your screen will see "None of your business" instead of the real name of the sender. Other than teaching the people around you to be polite and not read your phone screen unless invited to do so by you, there is little else you can do.
Message was edited by: GeekBoy.from.Illinois

HOW DO I TURN OFF REPEAT ON MY IPOD TOUCH

How do I turn off repeat on my ipod touch

Go to the music playing screen. On the left-hand side of the screen, right below the scrubber bar is an arrowed racetrack icon. That control Repeat. Tap the icon until it is white to turn it off.

How do I turn off background ni file activity when not using Labview? files such as nimxs.exe, nipalsm.exe, nipalsm.exe, nisvcloc.exe, nicitdl5.exe

How do I turn off background ni file activity when not using Labview? I use labview rarely, and I also use my computer for demanding multimedia applications, including multitrack digital audio recording. I need to reduce as much background activity as possible, and taking a look with task manager I see files such as nimxs.exe, nipalsm.exe, nipalsm.exe, nisvcloc.exe, and nicitdl5.exe running even when I haven't used Labview (8 I believe). These files run even after I right click the NI icon on the lower right and turn off the application. I would like the computer to boot up without these files, and for the necessary files to be activated only when I start the program.
Can this be done or do I have to remove labview from the system to improve performance?
Thanks

Hello, those processes are part of running NI services that start when Windows boots. These processes serve varied purposes and stopping them can have undefined and unknown consiquences for your NI products. These products run at "normal" priority meaning that they should be preempted by any process running at a higher priority which I would expect your other application to be doing given their time sensitivity. That being said, in Windows XP (I can't speak for other OSes), you can lower their priorities even greater through task manager (right click the process»set priority) to further remove them from contention for resources. If you want to prevent them from running you can set the service startup type to "manual" in Control Panel»Administrative Tools»Services. Right click the process go to Properties and Under the General tab choose Startup Type»Manual. This will start up the processes only when something directly starts it up. LabVIEW will start these processes up as it attempts to use them. When you shut down LabVIEW you will need to manually shut down these processes through task manager. Again, doing this can cause problems with your NI products on your system and it is not advised.
Travis M
LabVIEW R&D
National Instruments

How do I turn off the Ipod Charging Tone?

Firstly please don't say by turning down the sound slider because if I do I can't play the music on my ipod whilst it's charging.
Right the situation is that my iPod touch is connected via usb in my car so I can play music on the move, also as a bonus my iPod is charging at the same time, but here's the problem because it is charging not only do I get the music from the iPod I also get the annoying charging tone through the speakers. I can't find a setting for this specific tone in the settings, and searches would suggest that it can't be turned off. I do hope this is not the case becasue if it is it's madness. Also if I connect via aux cable if the usb is connecting ie the iPod is charging I still get the charging tone trilling it's merry way.
How can I turn off this tone. I know I can disconnect the usb ie stop the charging but that defeats to object as I then gradually use up the power meaning on long journeys I have to either dispense with the iPod or put up with the tone. Also when I get to my destination instead of having a fully charged iPod I am already down on power.
HELP?

Okay, well I'm still not aware of any iPod which repeats the charging tone. Have you checked in the Connector recess of your iPod to make sure there is no muck in there, or that there is no damage to the connector pins? This is because I still think that the connection between the cable, dock or whatever and the iPod is not staying "made". In other words, the connection is disconnecting and reconnecting and every time it reconnects, the beep sounds.
Can you watch the iPod's display? When charging, the battery symbol shows the lightning bolt or, when full, the plug in the battery. Does that change to the battery only just before the charging beep? If so, that suggests that the connection is being repeatedly broken and re-made. Also check the cable (just in case).
If you cannot solve this I think there are two options available to you.
Ask any of your friends (who have an iPod Touch with the same iOS version on it) if their iPod does the same as yours; if they are aware of a setting for this and if so, how to turn it off, or;
Make an appointment at the Genius bar of your local Apple store and see if they can sort this out.
Like you, I do not see the "change with buttons" option mentioned by kartabyaa, although I only have iOS 4.2.1 on my Touch. (I don't believe the iOS version is different to mine in this respect, but if you ask someone with the same iOS version as you, that should help confirm or refute what the iPod can and should do.)
<Link Edited by Host>

IPod Touch 2nd Gen (8gb) Loads to Apple symbol, then turns off, and repeats.

Okay so I went into my settings to do a reset on the iPod Touch. I did the reset and now all the iPod does is load the the black screen with the Apple symbol, stay on for a few minutes, turn off, and repeat.
When I connect the iPod to ANY computer with iTunes, it doesn't even show the iPod as connected. I honestly do not know what to do.
Does anyone have a solution on how to fix this?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Did you by chance not have the iPod connected to a charging source during the erase? It can take hours ao a 1G and 2G iPod and fully drain the battery before it is complete.

HT1657 How can I turn off the scrolling movie ads in itunes store?

How can I turn off the scrolling movie ads across the top of the screen when I open the itunes store and am in the movies section?

Thanks varjak paw.
I was afraid this was the case. To the degree that Apple marches down this well-travelled road towards making money by trying to pound customers into submission with flashing ads, etc. that actually serve only to aggravate and drive away at least people like me (28 year user of macs) from both Apple and whatever is being advertised, and indeed get in the way of my being able to efficiently do what is my part of what I always thought was the core of the synergism between Apple and its customers -- them innovating to provide the best tools to help us to be creative and productive, then the company will find itself sharing that space with myriad other companies so bankrupt for ideas and innovation that they have no other possible strategy that to promote mindless consumerism. That does not seem a place of strength for Apple and a complete forfeiting of its unique position. Sad to watch.

Remove age from birthday notification: I don't know the years most of my contacts were born, so I keep getting a default year 2000 birthdate. How can I turn off the age (xxth birthday) in Birthday Calendar - it really is very annoying!

I don't know the years most of my contacts were born, so I keep getting a default year 2000 birthdate.
How can I turn off the age (xxth birthday) in Birthday Calendar - it really is very annoying!?
Thanks
Tim

Where do you see the default birthday showing as Nov. 30? If you can explain that, I can probably modify the below script to do that clean up.
In response to the original problem:
I'm not sure why I missed the original reply, but here is an Applescript that will change all the years of any selected contacts to 1604 (default for no year).
tell application "Contacts"
          set thePeople to selection
          repeat with aPerson in thePeople
                    set theDate to birth date of aPerson
                    if theDate is not missing value then
                              set the year of theDate to 1604
                              set birth date of aPerson to theDate
                    end if
          end repeat
end tell
copy and paste it into a new Applescript Editor document. Select all the contacts you want to change (in Contacts), then run this script by clicking on the green Run button in Applescript Editor.

How do I turn off part repeat in record?

Similar Messages

Maybe you are looking for