How do I turn off the Read Only Folder attribute

I have created a new drive for a Windows Server 2012 and have tried formatting it with various ways.  Each time I format the drive, when I create a folder, the read only attribute is set and I can't turn it off.  I have looked at other forums for
similar issues and all suggest using the attrib function.  This appears to work, but when I refresh the folder, the read only is back on. 
Even after assigning permissions, I can create files in the folders, but I cannot modify them in MS Office or any other application.  Any ideas on how to resolve this.  It appears to be alot of recurring posts for the same issue with no results. 

Hi,
Windows Explorer does not allow you to view or change the Read-only or System attributes of folders. When a folder has the Read-Only attribute set it causes Explorer to request the Desktop.ini of that folder to see if any special folder settings need
to be set.
You cannot view or change the Read-only or the System attributes of folders in Windows Server 2003, in Windows XP, in Windows Vista or in Windows 7
http://support.microsoft.com/kb/326549
You mentioned that you cannot modify the file created in the folders. Can you modify a txt file? Please check if you have modify permissions on that files.
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

  • How do i shut off the read-only mode in iCal?

    I don't what happened but suddenly I cannot add any new entries to my iCal. I get a error prompt that says, "READ-ONLY CALENDAR - You cannot change events or To Do in a read-only calendar." How do I disable this read-only feature so I can use my iCal again. Any advise would be greatly appreciated. Thanks!

    Hyun, I suspect you just need to select another calendar in the panel on the left (eg Home). Subscribed to, and iCal Birthday calendars are read-only.

  • How do I turn off the "reading untagged document" prompt?

    Assume this is a new feature added in one of the multitude of updates that I get prompted for?  All of sudden today, everytime I open a PDF file from an email, I get the "Reading Untagged Document" pop up that's telling me my document is "untagged and must be prepared for reading".  Uhhhh, no it doesn't because I can read.
    thanks..

    There is no way to turn them off as Adobe, in their infinite wisdom, assumes everyone wants to see this as it's part of Assessibilty.
    That said, there is a work around, but it involves removing or renaming files in the Adobe install directory.  Basically you want to remove or rename the following files:
    <your_adobe_installation_path>\Reader\plug_ins\Accessibility.api
    <your_adobe_installation_path>\Reader\plug_ins\MakeAccessible.api
    <your_adobe_installation_path>\Reader\plug_ins\ReadOutLoud.api
    The easiest method is to create a "backup" folder somewhere (it can be in the Reader folder) and simply move those 3 files there.  The benefit for this is Adobe Reader runs a lot faster and the annoying document preparation is disabled.  Why Adobe doesn't allow users to disable these through the preferences is beyond me since that's the first thing I think everyone does after installing Adobe Reader.

  • I have a HDMI connected TV, the HDMI is used for the cable also, I need to use a splitter, but it will only select what is powered on.  How can I turn OFF the iTV via the remote?

    I just received my iTV and am just setting it up.  The Panasonic HDTV only has one HDML imput.  The Uvirse box has a HDML output as well as a optical output.  I am using an older Bose sound system which works very well.
    I purchaced a HDML splitter which will allow me to use both.  How do you turn OFF the iTV box when you are trying to watch the Cable?

    https://discussions.apple.com/thread/2605624?start=0&tstart=0
    thats as much off you can turn it

  • How do i turn off the auto lock feature?  In my options it does not have "never" on it.  It is only timed amounts.

    How do I turn off the auto lock feature.  I have only timed options.  There is not the "never" option available.

    I've got options for 2, 5, 10, 15 minutes and Never. Have you got an Exchange email account on your iPad ? 'Never' can be removed so as to protect a company's potentially sensitive email - they may not want the iPad being left/stolen with the emails on it accessible. If you remove the account the Never option will probably reappear

  • How can I turn off the option in my message settings so that others can not tell that I have read there texts? Please HELP

    How can I turn off the option in my message settings so that others can't tell that I have read there message I have an iphone4 updated to the 6ios

    Set Settings->Messages->Send Read Receipts to Off.

  • How do i turn off the setting where the phone reads all the buttons to me once i click it?

    how do i turn off the setting where my phone reads me all the buttons that i touch? it wont let me scroll or nothing with it on.

    go to settings and go to general and tap acssesibility and then turn off speak Auto-text.

  • How do i turn off the service searching?plz read

    Ok so I was stationed to Iwankuni Japan and of course my awesome iphone doesn't work out here :'-( how can i turn off the phone part so that i can still have my wifi on and it isn't searching for service?
    pretty much i want to make it an ipod touch.
    Any ideas?

    Hi there,
    Just put it into Airplane mode: settings> airplane mode on
    This will also disable Wi-Fi and Bluetooth though. To avoid this, take out the SIM card; then you'll have Wi-Fi, and all the non-phone features. Use a paperclip to press on the hole next to to the earphone recess; press firmly and the SIM card tray will pop out. Make sure you put the SIM card somewhere safe, away from magnetic sources. When you return home, simply put the SIM card back in; and you'll resume normal service, with no need to activate again.
    Message was edited by: jia10

  • How can I turn off the sound from the original midi  or audio tracks when I turned on the duplicate tracks for editing ?

    How can I turn off the sound from the original midi or audio tracks when I edit or listen to the duplicate tracks in Logic Pro 9 ?
    I'm using iMac desktop with Mac OS X Version 10.7.3. Pls advise.

    Dan,
    It sounds like one of your preferences has changed.
    Go to preferences > audio > general, and make sure "track mute/solo" is set to "CPU saving (slow response)". It is probably set to "Fast " at the moment.
    This setting (fast) basically causes immediate muting from the channel strip while your song is in play. This is because the audio is still being read from the hard drive, but the channel strip is simply muted.... like a hardware mixer. When set to "CPU saving", the audio from that track, when muted, is actually stopped from streaming from the hard drive, but there is a couple second delay before the audio is actually muted.
    One would think that the fast setting is generally preferable, except when you need to do what you are doing. The only way to keep duplicate copies of channel strips acting independent of one another is to leave this setting on the "CPU saving" setting.
    Hope that helps

  • HT1657 How can I turn off the scrolling movie ads in itunes store?

    How can I turn off the scrolling movie ads across the top of the screen when I open the itunes store and am in the movies section?

    Thanks varjak paw.
    I was afraid this was the case.  To the degree that Apple marches down this well-travelled road towards making money by trying to pound customers into submission with flashing ads, etc. that actually serve only to aggravate and drive away at least people like me (28 year user of macs) from both Apple and whatever is being advertised, and indeed get in the way of my being able to efficiently do what is my part of what I always thought was the core of the synergism between Apple and its customers -- them innovating to provide the best tools to help us to be creative and productive, then the company will find itself sharing that space with myriad other companies so bankrupt for ideas and innovation that they have no other possible strategy that to promote mindless consumerism.  That does not seem a place of strength for Apple and a complete forfeiting of its unique position.  Sad to watch.

  • HT200154 how do you turn off the apple TV box?  There doesn't seem to be an off button.  The status light stays on.

    how do you turn off the apple TV box?  There doesn't seem to be an off button.  The status light stays on.

    Usually, when you put it to sleep mode, the status light will turn off.  To put it into sleep mode, go to Settings.
    If you want it completely off, then I guess the only way to do it is to pull the electric plug.

  • How do you turn off the log file?

    How can I turn off the log file for WLS? Don't want the added overhead
    of logging during performance tests.
    Edwin

    The only way I know is:
    # startWebLogic.sh > /dev/null &
    Only if you are running on unix.
    Edwin Marcial wrote:
    Ok, I'll settle for this. How do I stop the echo?
    "Larry L. Presswood Jr." wrote:
    you can also have it not echo to the console as well
    Srikant Subramaniam wrote:
    I don't think you can turn off the system log file (weblogic.log). You can
    disable the HTTP specific logging with the following:
    weblogic.httpd.enableLogFile=<boolean>
    (defaults to true)
    Srikant.
    Edwin Marcial wrote:
    How can I turn off the log file for WLS? Don't want the added overhead
    of logging during performance tests.
    Edwin
    Damon Sicore
    [email protected]

  • How can I turn off the green light indicator on my AirPort Express?

    How can I turn off the green light indicator on my AirPort Express? It really annoys me.

    The Zed,
    You have two options and you probably won't like any of them.
    Using the Airport Utility, click on the AE then "Base Station", then "Options". That will bring up two options for you AE green light, either keep it green at all times or only light up when it is being used.
    The second option is put some tape over it.
    Hope this helps.

  • How can i turn off the spam filter?

    How can i turn off the spam filter for HP eprintcenter?

    zanganah;
    I hope you are doing well and sorry to learn that you are having this issue;
    Most of the time when you have issues receiving emails is that the email have something like FWD  subject line. Eliminate that. 
    Does the email have a title? Make sure it does.
    ePrint emails can only have one email address in the “To:” field. To send an email to your printer and to additional email addresses of friends and family at the same time, put your printer's email address in the “To:” field, and put your friends/family email addresses in the “BCC” (blind carbon copy) field.
    Also this are some of the limitations of the service to keep in mind;
    The attachment size or number of attachments exceeded the allowed limit.
    There is a 5 MB limit to the email and a 5MB limit to each attachment. HP ePrint supports a maximum of 10 attachments to a single email. Emails that exceed these limits will not print.
    Is the attached file supported by ePrint? Supported attachments include:
    Microsoft Word
    Microsoft PowerPoint
    Microsoft Excel*
    Text files (.txt)
    PDF
    HTML
    Images (bmp, jpg, png, gif, tiff)
    * HP strongly recommends that you preview documents in Excel before printing.
    Hope this helps:
    RobertoR
    And Remember . . .
    You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

  • How can I turn off the sounds of the firefox? I don't want to turn off my whole computer sounds, but just the sounds which comes from the internet. Is there any master button?

    All the websites doesn't allow you to turn off the sounds, but that is just the thing I need to do. So how can I turn off the web browsers sounds? This is so small thing, that I refuse to believe that this kind of button doesn't exits.

    In Vista you can set the volume and mute setting for each application separately in the volume mixer.
    You can click the Volume icon on the Windows Taskbar near the clock and click the Mixer link at the bottom to open the mixer.<br />
    You can adjust the volume level for each application in that window.<br />
    You will only see the Firefox program in the Mixer if you are on a website that plays sound.

Maybe you are looking for