How do I turn off the virus adobe updater ?

Im considering the adobe updater as virus* and I want to shut it off whitout entering registrykeys.
Ideas and tips appreciated.
( * A virus is a software performing unwanted actions at your equipment.)

foxit_reader wrote:
Nope, dont have that function. Running adobe reader 9.1.3.
If you have Adobe Reader 9.1.3, then you have that functionality. I have it, and I have checked it off, because I know when new updates become available.

Similar Messages

How do I turn off the automated Adobe Cloud ID window that opens everytime I turn on my computers. Do NOT subscribe to CC. HELP.

How do I turn off the automated Adobe Cloud ID window that opens every time I turn on my computers. I want this annoying window to stop appearing. I do not and will not subscribe to "Adobe Cloud" but the program (all 197 MB) somehow found it's way onto both my computers. Nefarious at the least.
I'm afraid to uninstall the "adobe cloud" programs from my computers because I fear that they are linked to my stand alone version of cs6 and my somehow corrupt the operation of my cs6.
HELP. PLEASE.

Have you installed any trial of Adobe CC because in all probability the auto prompt to purchase CC appears when the trial run ends.?
The stand alone version of CS6 is not going to be affected if you uninstall the trial CC.
Regards
Rajshree

How do I turn off the alt scroll zoom? When I'm in Adobe photoshop and illustrator using the pen tool, alt is utilized for another short cut. I would like to use the alt command for the pen tool instead of zooming into the screen.

How do I turn off the alt scroll zoom?
When I'm in Adobe photoshop and illustrator using the pen tool, alt is utilized for another short cut. I would like to use the alt command for the pen tool instead of zooming into the screen.

I tend to select things from left to right and every time I am moving in a downward right diagonal motion during lasso selection I am missing a clear view and I am tending to have a more sloppy selection. All this does is slow me down since I need to go back and hit those areas again. The big arrowhead just get's in the way. The original lasso tool with the thin line and small active point at it's lower left was far better for me.
I don't like turning the cursors to precise because I like to see the active tool icon where my cursor is and as the icon changes as I hold modifier keys down. If I am forced to get comfortable with using pricise cursors I guess I will, but man, I've never had to do this in my 15 years of photoshop use...
I would absolutely LOVE to find a way to get the old lasso icon -- without the arrowhead above it.
Is there any chance this option could be inlcuded in cursor preferences? I'd give much thanks, Adobe.

How can I turn off the Download pop up Window from displaying when downloading a file?

How can I turn off the Download pop up Window from displaying when downloading a file?

To not display the built-in Firefox downloads window, Tools > Options > General tab, un-check "Show the Downloads window when downloading a file". See: http://support.mozilla.com/en-US/kb/Options+window+-+General+panel
If you have some other download manager installed, you will need to see the documentation for the download manager.
 
You have installed plugins with known security issues that should be updated. To see the plugins submitted as part of your question post, click "More system details..." to the right of you original question.
*Shockwave Flash 10.1 r53
*Next Generation Java Plug-in 1.6.0_18 for Mozilla browsers
#'''Check your plugin versions''': http://www.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#'''Update Shockwave Flash'''
#*Use Firefox to Download and SAVE to your hard drive from one of the links below; '''the links take you directly to the download and you avoid the "getplus" download manager and "extras" (i.e., toolbars, virus scan links, etc.) on the main Adobe page.'''
#*SAVE to your Desktop so you can find it
#*After download completes, close Firefox
#*Click on the file you just downloaded and install
#**Note: Vista and Win7 users may need to right-click the installer downloaded and choose "Run as Administrator"
#**Note: Most browsers other than IE will also get updated with this one download
#**Note: To update IE, same procedure '''but use IE''' to go: http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player_ax.exe
#*After installation, restart Firefox and check your version again.
#*'''Download links and other information''':
#** https://support.mozilla.com/en-US/kb/Managing+the+Flash+plugin#Updating_Flash
#** '''or''' you can download, save, then run the manual installers for IE, then for Firefox (and all other browsers) from here: http://kb2.adobe.com/cps/191/tn_19166.html#main_ManualInstaller
#* Also see: http://support.mozilla.com/en-US/kb/Installing+the+Flash+plugin
#* Also see (if needed): http://kb2.adobe.com/cps/191/tn_19166.html#main_Uninstall
#'''Update Java:'''
#* Download and update instructions: https://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox
#* Removing old versions (if needed): http://www.java.com/en/download/faq/remove_olderversions.xml
#* Remove multiple Java Console extensions (if needed): http://kb.mozillazine.org/Java#Multiple_Java_Console_extensions
#* After the installation, start Firefox and check your version again.

How do you turn off the auto select behavior when working with shape layers?

How do you turn off the auto select behavior when working with shape layers?
I am using either of the path selection tools to select only some of the paths on the layer. I have the proper layer targeted. I have the selection too auto select option turned off.
If another layer has a path in that area, that layer becomes auto targeted and I get the wrong path. Turning off the layer is the only way to avoid this but then I have to turn on the layer back on between making my selection and transforming to use the other layer as guide. Is there any way to stop this auto select? Locking the other layer does not stop the auto select, just prevents editing.

As far as i know the move tool options don't have any effect on the path selection tools.
You might try clicking on one of the path points or on the path itself with one of path selection tools and if you want to select multiple points
you can shift click with the Direct Selection Tool or Alt click to select the entire path.
more path shortcuts:
http://help.adobe.com/en_US/photoshop/cs/using/WSDA7A5830-33A2-4fde-AD86-AD9873DF9FB7a.htm l
http://help.adobe.com/en_US/photoshop/cs/using/WSfd1234e1c4b69f30ea53e41001031ab64-7391a.h tml

How do I turn off the curvature tool in CC, I chose the selection tool to create a box and the middle selector that allows you to adjust the size has disappeared?

How do I turn off the curvature tool in CC, I chose the selection tool to create a box and the middle selector that allows you to adjust the size has disappeared? My coworker discovered making ti a compound path by right clicking it and selecting it. All I want to do is adjust the size of a box. please advise.

You should post questions about using applications in the specific application's forum(s).
Here is a link to a page that has links to all Adobe forums...
Forum links page:
https://forums.adobe.com/welcome

How can I turn off the "Free Subscription is ending in X days" pop-up. I bought the subscription and downloaded it. I'm using the paid version. It all appears to be working accept for the silly pop-up.

How can I turn off the "Free Subscription is ending in X days pop-up. I bought my subscription but still receive the notice.

Hi Carl,
Is it the Acrobat trial that's ending? (Adobe doesn't offer free subscriptions that expire after a set time.)
If you're referring to the Acrobat trial, have you logged in with your Adobe ID and password? If not, click License this Software in the pop-up that states the trial is ending soon, and then log in with your credentials, and you should be set.
Please let us know if that is not the case.
Best,
Sara

How do I turn off the "dynamic trim mode"?

How do I turn off the "dynamic trim mode"? I hate it, hate it, hate it. For those that love it... great. I am glad you do, keep working. I tried to adapt, but it just isn't worth the hassle. For me, I want it gone forever. Too much zooming, no simple ripple delete.
Again, if you love it, great! I want to turn it off, how about me adobe? I am so ready to move back to CS5.

PierreLouisBeranek wrote:
Hi Jim,
You're right. What I wrote isn't the actual problem. My mistake.
The real problem is this:
If I select an edit point with the Selection Tool ('V'), for example, and then change to the Rolling Edit Tool, the cursor doesn't change while hovering over the currently selected edit point, and the only way to use the Rolling Edit Tool on the selected edit point is to first deselect it and then reselect it again. The same problem occurs vice versa.
If you toggle the trim type to "Roll" after selecting the edit with a keyboard shortcut this is not necessary. It might take some getting used to, but see if that works for you.
PierreLouisBeranek wrote:
If I select an edit point's left side (outgoing clip) with the Selection Tool, but then want to select the right side at that same edit point (incoming clip), dragging the cursor over to the right side of the edit point has no effect (i.e. the cursor stubbornly remains a left-pointing arrow for editing the prior clip's out point). The only way to select the right side of the edit point to first deselect the left side (i.e. click on any clip) and then select the right side. The same problem occurs vice versa.
Again, toggle the trim type with a keyboard shortcut (Shift-T is for Windows, Ctrl-T is for Mac), then your tool will appear and behave as expected.
It sounds like you wish to have the Final Cut Pro behavior, where the cursor that is chosen will appear over the edit, regardless of how the edit is selected. Note that here you must click to select the edit with the proper trim type before you drag the tool.
In Premiere Pro, the cursor will not change to the selected tool unless the edit is selected with the corresponding trim type. If you want to click and drag the trim tools as you did with Final Cut Pro, yes, you must deselect the selected edit point first.
Anyone can send me a PM at any time. I'm your representative to the Premiere Pro team.

Every time I start iTunes I get the message: "iTunes exec has been set to run in compatability mode for an older version of Windows. Turn off compatability mode for iTunes before you open it." How do I turn off the compatability mode?

Every time I start iTunes I get the message: "iTunes exec has been set to run in compatability mode for an older version of Windows. Turn off compatability mode for iTunes before you open it." How do I turn off the compatability mode? Particularly when I have to do it before I turn on iTunes.

Try the following document, only be sure that none of the boxes in the compatibility mode tab are checked (not just the compatibility mode box itself):
iTunes for Windows: How to turn off Compatibility Mode

How do I turn off the feature that allows the duplication of App downloads to more than one phone? As in my wife downloads an app and I get a dulpicate download on my phone.

How do I turn off the feature that allows the duplication of App downloads to more than one phone? As in my wife downloads an app and I get a dulpicate download on my phone.

To disable that feature it will depend on whether or not you sync everything in the cloud using Apple's iCloud, OR if you both use the same desktop/laptop computer with iTunes. Here is a link to the Apple support page in regards to the automatic download feature included with your iPhone and corresponding softwares such as iTunes.
http://support.apple.com/kb/ht4539
Follow those instructions and it will all be taken care of.

How can I turn off the WLS 6.1 security in order to develop my own application-based security module?

Dear Colleagues,
I am currently developing a J2EE application using WLS 6.1.
My team and I have to implement a security requirement to suit our company's needs.
The security requirements are that, users' password need to be aged (30 days maximum) and we need to provided a GUI front-end (JSP) to allow users to change their password when these expire after 30 days.
Our internal contacts in the company, have already taken the lead to find out about whether we will be able to use the WLS 6.1 platform to do this and the answer we got back, was.
Now we need to develop our own security module.
I have 2 questions:
1. How can we turn off the WLS security in order develop our own application-based security module?
2. How can we develop a security module that allows us to age users' password and provide them with facilities to change their passwords when these expire?
At the moment, we are using the default BEA WebLogic login.jsp page and there some configuration in the web.xml for this. I will be grateful if you could advise me on how to turn this default security off so that we can write our own security module.

hi,
1.You can write your own realm in 61 which can plugged for your security
calls.
2. once you write your ownrealm.. you can access it through weblogic
api/ur api..
thanks
kiran
"Richard Koudry" <[email protected]> wrote in message
news:3dd0d081$[email protected]..
Dear Colleagues,
I am currently developing a J2EE application using WLS 6.1.
My team and I have to implement a security requirement to suit ourcompany's needs.
>
The security requirements are that, users' password need to be aged (30days maximum) and we need to provided a GUI front-end (JSP) to allow users
to change their password when these expire after 30 days.
>
Our internal contacts in the company, have already taken the lead to findout about whether we will be able to use the WLS 6.1 platform to do this and
the answer we got back, was.
>
Now we need to develop our own security module.
I have 2 questions:
1. How can we turn off the WLS security in order develop our ownapplication-based security module?
>
2. How can we develop a security module that allows us to age users'password and provide them with facilities to change their passwords when
these expire?
>
At the moment, we are using the default BEA WebLogic login.jsp page andthere some configuration in the web.xml for this. I will be grateful if you
could advise me on how to turn this default security off so that we can
write our own security module.

How do I turn off the annoying voice on Apple TV.

How do I turn off the very annoying voice to come on when I use Apple TV. I did not have this when I first set it up but had to reset the apple tv as my Netflix wa not working?

settings > general > accessibility > off

How do I turn off the requirement to enter my password everytime I want to delete a file in Finder?

How do I turn off the requirement to enter my password everytime I delete a file in finder?

Please take these steps if you're prompted for a password when moving items in your home folder to the Trash.
1. Triple-click anywhere in the line below on this page to select it:
~/.Trash
2. Right-click or control-click the highlighted line and select
Services ▹ Show Info in Finder (or just Show Info)
from the contextual menu.* An Info dialog should open.
3. The dialog should show "You can read and write" in the Sharing & Permissions section. If that's not what it shows, click the padlock icon in the lower right corner of the window and enter your password when prompted. Use the plus- and minus-sign buttons to give yourself Read & Write access and "everyone" No Access. Delete any other entries in the access list.
4. In the General section, uncheck the box marked Locked if it's checked.
5. From the action menu (gear icon) at the bottom of the dialog, select Apply to enclosed items and confirm.
6. Close the Info window and test.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. Open a TextEdit window and paste into it (command-V). Select the line you just pasted and continue as above.

How can I turn off the yellow pop-up tool tips?

Howdy,
I have searched high and low in the preferences and found nothing that does the trick. How can I turn off the yellow pop-up tool tips?
See attached screen shot. They are incredibly annoying. It's probably obvious, but I cannot find it anywhere on internets or this forum.
Thanks!

Thanks Nancy. Unfortunately that doesn't do it. I turned those off awhile back. Nor can I find anything under VIEW that seems to make a difference. Just FYI: I'm on a Mac OS w/Dreamweaver CS6 - but this has happened on previous versions of DW. Thanks again.

How can I turn off the sound from the original midi or audio tracks when I turned on the duplicate tracks for editing ?

How can I turn off the sound from the original midi or audio tracks when I edit or listen to the duplicate tracks in Logic Pro 9 ?
I'm using iMac desktop with Mac OS X Version 10.7.3. Pls advise.

Dan,
It sounds like one of your preferences has changed.
Go to preferences > audio > general, and make sure "track mute/solo" is set to "CPU saving (slow response)". It is probably set to "Fast " at the moment.
This setting (fast) basically causes immediate muting from the channel strip while your song is in play. This is because the audio is still being read from the hard drive, but the channel strip is simply muted.... like a hardware mixer. When set to "CPU saving", the audio from that track, when muted, is actually stopped from streaming from the hard drive, but there is a couple second delay before the audio is actually muted.
One would think that the fast setting is generally preferable, except when you need to do what you are doing. The only way to keep duplicate copies of channel strips acting independent of one another is to leave this setting on the "CPU saving" setting.
Hope that helps

How do I turn off the virus adobe updater ?

Similar Messages

Maybe you are looking for