How do I turn off Web Developer Toggle Tools to just use Inspector by itself?

I was using Inspector by itself. Sometimes Inspector has problems inspecting so I shut down Firefox and re-open it. I did this. When I reopened I use Ctrl + Option + i to open Inspector and it automatically opens Toggle Tools (all Web Developer options). I can find no help on how to switch it back to JUST using Inspector. The same thing happens with Debugger and Style Editor (their shortcodes open ALL the tools).
I can not get this function to turn off.

You should be able to use a menu bar at the top of the Developer Toolbox to select the various tools.
You can only select one tool at the time and opening the Inspector should give you an HTML panel and a Style panel
*https://developer.mozilla.org/en/Tools/Page_Inspector
*https://developer.mozilla.org/en/Tools/Page_Inspector/HTML_panel
*https://developer.mozilla.org/en/Tools/Page_Inspector/Style_panel
You can detach this panel via the two Doc button at the right hand side of the developer toolbar. 
The style panel moves to the the bottom if the window width is below a specific width.

Similar Messages

How do I turn off background ni file activity when not using Labview? files such as nimxs.exe, nipalsm.exe, nipalsm.exe, nisvcloc.exe, nicitdl5.exe

How do I turn off background ni file activity when not using Labview? I use labview rarely, and I also use my computer for demanding multimedia applications, including multitrack digital audio recording. I need to reduce as much background activity as possible, and taking a look with task manager I see files such as nimxs.exe, nipalsm.exe, nipalsm.exe, nisvcloc.exe, and nicitdl5.exe running even when I haven't used Labview (8 I believe). These files run even after I right click the NI icon on the lower right and turn off the application. I would like the computer to boot up without these files, and for the necessary files to be activated only when I start the program.
Can this be done or do I have to remove labview from the system to improve performance?
Thanks

Hello, those processes are part of running NI services that start when Windows boots. These processes serve varied purposes and stopping them can have undefined and unknown consiquences for your NI products. These products run at "normal" priority meaning that they should be preempted by any process running at a higher priority which I would expect your other application to be doing given their time sensitivity. That being said, in Windows XP (I can't speak for other OSes), you can lower their priorities even greater through task manager (right click the process»set priority) to further remove them from contention for resources. If you want to prevent them from running you can set the service startup type to "manual" in Control Panel»Administrative Tools»Services. Right click the process go to Properties and Under the General tab choose Startup Type»Manual. This will start up the processes only when something directly starts it up. LabVIEW will start these processes up as it attempts to use them. When you shut down LabVIEW you will need to manually shut down these processes through task manager. Again, doing this can cause problems with your NI products on your system and it is not advised.
Travis M
LabVIEW R&D
National Instruments

This is so basic: How do you turn off Apple TV, or do you just exit by changing the Input back to regular TV? When I put Apple TV to sleep, I had to log in again, a very tedious process with that awful "announcer" for the hearing impaired (how to remove?)

This is so basic: How do you turn off Apple TV, or do you just exit by changing the Input back to regular TV? When I put Apple TV to sleep after I installed it, I had to log in again, a very tedious process with that awful "announcer" for the hearing impaired (and how to remove that?).

Welcome to the Apple Community.
The Apple TV will put itself to sleep. I'm not sure what you needed to log into again, but you shouldn't have to. Do you have a little more detail about what happens.

How do you turn off the Mac book pro monitor when using dual monitors?

How do you turn off the monitor on the mac book pro and only see your second monitor?

You close the lid and run in "clam-shell" mode
http://support.apple.com/kb/HT3131?viewlocale=en_US

Turn off web developer

While I'm surfing the web, the Web Console will open for no reason. I have to close it in order to proceed. It has locked the browser and forced me to restart. This just started in the last copy of days. I can not figure out how to stop this. I'm not a web developer and I don't want to see this, or to have to close the window to proceed with my browsing.
Vesion 25.0.1 Mozilla FireFOx for Yahoo! Edition yahoo - 1.22
Thanks,

You can check for problems caused by a corrupted localstore.rdf file.
*http://kb.mozillazine.org/Corrupt_localstore.rdf
Create a new profile as a test to check if your current profile is causing the problems.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer some files from an existing profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over the problem.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

How can I turn off auto play of an swf/flv using actionscript?

Does anyone know how to turn off autoplay, using actionscript, of swf/flv?
I'm trying to showcase four videos on the same page of a website. each video is a generic media player created in flash. when i test the movie, all the videos start playing at once.
Also, if possible is there a way to have all four videos in the same media player?

the media player has an autoPlay property.
and yes, it also has a contentPath property.

How I do turn off the auto-select tool in the tools palette?

No matter what I do in LabVIEW 8, it keeps turning itself back on. It never used to do that in LV6.1!!!

Yes, I noticed that too... Annoying, isn't it? I haven't seen how to turn that off, as a matter of fact, I haven't seen the tools palette either..

How do I turn off the requirement to press control when using a function key

When using my wireless keyboard, it requires me to press controls to use the function keys (F3, F5, F70.) However, this makes it so some of my games controls won' work,(For example, in Minecraft I can't access the debug menu.) Is there any way to disable this.Thank you for your support

Please take these steps if you're prompted for a password when moving items in your home folder to the Trash.
1. Triple-click anywhere in the line below on this page to select it:
~/.Trash
2. Right-click or control-click the highlighted line and select
Services ▹ Show Info in Finder (or just Show Info)
from the contextual menu.* An Info dialog should open.
3. The dialog should show "You can read and write" in the Sharing & Permissions section. If that's not what it shows, click the padlock icon in the lower right corner of the window and enter your password when prompted. Use the plus- and minus-sign buttons to give yourself Read & Write access and "everyone" No Access. Delete any other entries in the access list.
4. In the General section, uncheck the box marked Locked if it's checked.
5. From the action menu (gear icon) at the bottom of the dialog, select Apply to enclosed items and confirm.
6. Close the Info window and test.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. Open a TextEdit window and paste into it (command-V). Select the line you just pasted and continue as above.

How do I turn off "Automatically adjust brightness" on Mountain Lion using AppleScript

I'm new to Mac, Applescript and Automator and I'm trying to make a automation for when I perform on stage and found a script to set the brightness all the way up but can't find a script to disable "Automatically adjust brightness". Any help would be appreicated.

You could even both “set the brightness all the way up” and “disable Automatically adjust brightness” with just one and the same script:
tell application "System Preferences"
    -- launch
    -- activate
    set current pane to pane id "com.apple.preference.displays"
    reveal anchor "displaysDisplayTab" of current pane
    tell application "System Events"
        tell process "System Preferences"
            tell group 1 of tab group 1 of window 1
                set value of slider 1 to 1.0 -- max
                tell checkbox 1
                    if value is 1 then click
                end tell
            end tell
        end tell
    end tell
    quit -- optional
end tell

How do I turn off Imovie so I can get back into Iphoto

How do I turn off Imovie so that I can start using Iphoto again?

Command Q
If it isn't responding, press and hold Command Shift Option Escape for about 10 seconds

How do I turn off autosave osx lion

How do I turn off autosave on osx lion? Just got new MacBook pro & autosave crashes Photoshop adobe when I'm doing large format design! This is a designers worst nightmare having autosave. Because you can do some work, then change your mind , but it's too late, autosave has saved over your work! Great for small files like text, but design large files? If you can't turn off autosave then apple can kiss goodbye to all it's design clients which is alot of there buyers I would imagine. Can you turn it off please help?

I have no way of knowing what Apple will do in the future. You can certainly report you wishes at
Apple Feedback.
As for "oversight," I'd say it was yours, not Apple's. Should have done a little more research before you purchased. This "issue" is nothing new.

HT1338 how do I turn off optical digital-out port?

how do I turn off optical digital-out port?

Just want to report that I too, running 10.6.5 on a MacBook Pro, had the mysterious " Audio Out Stuck On Optical Digital-Out Port" problem whereby I was unable to adjust the volume on my built-in speakers and they were permanently "muted" because the operating system was sending the audio signal to a non-existent device that it falsely thought was plugged in to my unused headphone jack hole. I thought at first the problem must necessarily be software-based because the built-in speakers worked fine when playing the start-up chimes. So I uninstalled something called "Soundflower" which does some mysterious shenanigans with commandeering the internal audio signal so that one can make audio recordings of one's computers' sound effects. But uninstalling Soundflower had no effect. So I uninstalled some other audio-related software, also to no avail. Then I zapped the PRAM, to no avail.
Then I decided to try what some people call "the toothpick trick," i.e. poking around in the headphone jack hole to see if something was stuck in there shortcircuiting it, and initiating the false signal to the OS.
Bingo! Success!
Actually, I did a hyper-sophisticated version of the toothpick trick:
First, I own a home "otoscope," one of those doohickeys that doctors use to look into your ear. One can now buy amateur versions of otoscopes for home use, to looks for kids' ear infections, etc. (They only cost $30 or so.) Anyway, using the smallest attachment designed for babies' ears, I was able to look (with illumination) into the headphone jack hole and yessiree there was a big bunch of dust stuck way deep in there.
So then I took not a toothpick but instead a slender dental prong-pick thingie made of stainless steel, and very delicately was able to snag the clot of dust deep in the hole at the bottom on the first try. Quite a wad!
Then I took one of those rubber ear-bulbs, used for cleaning out your ears, and used it as a micro-vacuum-cleaner: Squeeze the rubber bulb til it is as empty as can be, then place the tip of the bulb at the entrance to the headphone jack hole, then suddenly release my grip: it ***** air out of the tiniest spaces! After doing this a few times, I then did the reverse and blew blasts of air into the hole.
After all this, I looked back into the hole with the otoscope, and it was sparkling clean! Not even the tiniest speck of dust in an area that just three minutes earlier was thick with dust.
I then turned my computer back on and...problem solved! The audio worked again like normal, and it was no longer detecting an imaginary "Optical Digital-Out Port" device. The internal speakers once again worked as normal, and the volume could be adjusted.
I guess the problem for me really was dust causing a short-circuit. It might very well be the same for you -- so try cleaning out the headphone jack hole as I did.
I'm writing this detailed description to help anyone else in the future with a similar problem.

How can I turn off the WLS 6.1 security in order to develop my own application-based security module?

Dear Colleagues,
I am currently developing a J2EE application using WLS 6.1.
My team and I have to implement a security requirement to suit our company's needs.
The security requirements are that, users' password need to be aged (30 days maximum) and we need to provided a GUI front-end (JSP) to allow users to change their password when these expire after 30 days.
Our internal contacts in the company, have already taken the lead to find out about whether we will be able to use the WLS 6.1 platform to do this and the answer we got back, was.
Now we need to develop our own security module.
I have 2 questions:
1. How can we turn off the WLS security in order develop our own application-based security module?
2. How can we develop a security module that allows us to age users' password and provide them with facilities to change their passwords when these expire?
At the moment, we are using the default BEA WebLogic login.jsp page and there some configuration in the web.xml for this. I will be grateful if you could advise me on how to turn this default security off so that we can write our own security module.

hi,
1.You can write your own realm in 61 which can plugged for your security
calls.
2. once you write your ownrealm.. you can access it through weblogic
api/ur api..
thanks
kiran
"Richard Koudry" <[email protected]> wrote in message
news:3dd0d081$[email protected]..
Dear Colleagues,
I am currently developing a J2EE application using WLS 6.1.
My team and I have to implement a security requirement to suit ourcompany's needs.
>
The security requirements are that, users' password need to be aged (30days maximum) and we need to provided a GUI front-end (JSP) to allow users
to change their password when these expire after 30 days.
>
Our internal contacts in the company, have already taken the lead to findout about whether we will be able to use the WLS 6.1 platform to do this and
the answer we got back, was.
>
Now we need to develop our own security module.
I have 2 questions:
1. How can we turn off the WLS security in order develop our ownapplication-based security module?
>
2. How can we develop a security module that allows us to age users'password and provide them with facilities to change their passwords when
these expire?
>
At the moment, we are using the default BEA WebLogic login.jsp page andthere some configuration in the web.xml for this. I will be grateful if you
could advise me on how to turn this default security off so that we can
write our own security module.

HOW DO YOU TURN OFF "FIREFOX PREVENTED THIS PAGE FROM AUTOMATICALLY RELOADING". I did the "see Advanced - General - Accessiblity. and still having problems

HOW DO YOU TURN OFF "FIREFOX PREVENTED THIS PAGE FROM AUTOMATICALLY RELOADING". I did perform the "see Advanced - General - Accessibility. It worked for me and my "user" site (don't know how to say my site) and still having problems with my wife's. I have gone to OPTIONS → GONE TO → ADVANCE and CLICKED THE LINE → ""Warn me when websites try to redirect or reload the page…""
This did not rememdy the problem. I did try to get on the other site suggested
http://kb.mozillazine.org/Accessibility.blockautorefresh
but got a 404 error...
I have googled the "ff prevented...." and after a number of hours searching I still have not found a fix...
REALLY HOPE SOMEONE CAN HELP ME....
JM

You should still disable this setting:
*Firefox > Options/Preferences > Advanced > General : Accessibility : [ ] "Warn me when web sites try to redirect or reload the page"
The setting in "Options > Advanced > General" is meant as an accessibility feature, as you can see by the label of that section, so that people with disabilities or people who use screen readers do not get confused and is not meant as a safety protection to stop redirecting.
What is the value of the accessibility.blockautorefresh pref on the about:config page?
*http://kb.mozillazine.org/accessibility.blockautorefresh
If you have problems with preferences, see:
*http://kb.mozillazine.org/Preferences_not_saved
Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

How do I turn off Facebook text messages?

Hello,
I really don't know where to ask this question, so I hope I'm posting it in the right location. I transitioned from the iPhone 3GS to the new iPhone 4S. On my older iPhone, I NEVER received text messages from Facebook (which is a good thing). However, now that I am using the 4S, I am constantly getting bombarded with text messages from Facebook. They are "notifications", ie, when someone posts to my wall or if someone responds to a comment that I made.
I don't know if this is something that is controlled from the Facebook web page (using Safari on my iMac), or if it is controlled from the Facebook app on my iPhone, or if it is controlled from "Settings" or "Notifications" on the iPhone. I have tried all of these places and turned everything off. All notifications for Facebook are in the "OFF" position. I am at my wit's end because this stupid thing is waking me up in the middle of the night with Facebook text messages.
If anyone can help me in finding out how to turn this feature off, I would sure appreciate it. Thanks!

Okay, it has been a few hours and I have not had a single text message from Facebook. WHEW!!
It had to be your suggestion that fixed it. I don't know how I missed turning off that one notification, but I guess that's what did the trick. They have made this notification stuff a bit confusing, becasue there are multiple areas where you can go in and turn stuff on and offf, and you really can't tell what it is you're doing until it's too late.
Thanks again for your help. I will mark this question as "Answered".

How do I turn off Web Developer Toggle Tools to just use Inspector by itself?

Similar Messages

Maybe you are looking for