How do I turn off wifi syncing and go back to the cable sync in iTunes?

How do I turn off wifi syncing and go back to the cable sync in iTunes?

Select the device in iTunes and uncheck WiFi syncing on the Summary pane of it's sync settings.

Similar Messages

  • My iPad 1 is turning off an app and going back to the main screen at odd times.  I've already updated it... to no avail.  Do I need to reset it to factory defaults and reload everything?

    It turns off many apps at random times. 
    Plus, it won't let me go to the next level of Plants and Zombies!  I've played the same level about 15 times... it goes all the way through the level and then cuts out when it is giving me extra points for my lawn mowers.  Then it goes to the main screen... then when I go back into the game... I'm at the beginning of the level all over again! 
    No fun!

    I'm unsure what you mean but "factory reset" but first try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow the on-screen directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore and you have IOS-6 or lower, go into Recovery Mode per the instructions here.  Also, if you have IOS-7, read this.

  • HT201150 How can I turn off this "feature" and have the power button bring me the shut down / restart / sleep dialog by default again?

    How can I turn off this "feature" and have the power button bring me the shut down / restart / sleep dialog by default again?
    With the position of the power button on the Retina MacBooks, any mistake turns off the screen in the middle of a presentation or any activity using a projector or big screen — a huge waste of time to wake up the display, enter password, have the projector sync back, watch audience disconnecting from what was being discussed, etc.
    This is very annoying, and seems to add to the increasing collection of options Apple decided to make by itself instead of allowing the user to choose.
    Come on Apple guys, I'm using my Mac because I want options and lots of preferences to tweak to my needs.
    If I needed the lobotomized version I'd be using my iPad!
    Any way (official or hack) to change this button back to its proper funcionality?
    Thanks!

    cterra wrote:
    How can I turn off this "feature" and have the power button bring me the shut down / restart / sleep dialog by default again?
    Not what you want, but you can get the shut down / restart / sleep dialog by holding the power button

  • I was trying to make a new screen recording using quicktimeplay, but when I watched the video after recording it all I could hear was me talking while the video was showing on the screen. How do I turn off that recording and turn the right one on? thanks

    I was trying to make a new screen recording using quicktimeplay, but when I watched the video after recording it all I could hear was me talking while the video was showing on the screen. How do I turn off that recording and turn the right one on? thanks

    Hi j2399123,
    It sounds like your screen recording is doing what it was designed to do, capture what is happening on your screen, with optional voice over with the microphone.
    Screen recording is for recording what you see on the screen, it is not a "video capture" option, like for capturing a movie with sound that is playing on your screen.
    For the QuickTime recording options, check out "Recording with QuickTime Player" in
    Mac Basics: QuickTime Player creates, plays, edits, and shares video and audio files
    http://support.apple.com/kb/ht4024
    And for screen recording specifically, there's
    QuickTime Player 10.x: Record your computer’s screen
    http://support.apple.com/kb/PH5882
    Thank you for thinking of Apple Support Communities for your support needs.
    Nubz

  • How do I turn off hierarchical keywording in LR 5?  The interface preference for auto complete is off and I still get California United State Country.  I just want Caliofrnia.

    How do I turn off hierarchical key wording in Lightroom?  The Interface Preference for Auto Complete is already turned off, but I still get California>United States>North America when all I need is California.

    You need to be signed in order to reply to posts.
    One reason why you may see the hierarchical type format for the keywords is that you have keyword 'California' duplicated in your keyword list.
    Lightroom will display them with "< Parent-keywords" appended to the end.
    ie California < State < Country  and California < United States
    If you re-keyword the photos so they only use one version and then delete the duplicate keyword from your keyword list then it will display just "California".
    Bruce

  • HT202774 Captions are not respected when turned off under Accessibility and still appear in the native player, how do I turn of captions?

    Captions are not respected when turned off under Accessibility and still appear in the native player, how do I turn of captions for the native player?

    Restart your computer while holding down left mouse key. That will eject the CD and your Mac will start as normal.
    Lupunus

  • Last week I've install Mac OS X Mountain Lion and then after the installation finish my IMAC start up in verbose mode. How can I turn off this mode and start my IMAC normally. I've try to key in the code "sudo nvram boot-args=" in terminal also.

    Last week I've install Mac OS X Mountain Lion and then after the installation finish my IMAC start up in verbose mode. How can I turn off this mode and start my IMAC normally. I've try to key in the code "sudo nvram boot-args=" in terminal also.
    Thank you for all of your answer.

    I've seen it mentioned on here that a PRAM reset may solve it:
    Reset PRAM
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P and R.
    You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

  • How do you turn off voice dial and Siri - since the newest update?

    How do you turn off voice dial and Siri - since the newest update?

    This worked for me:
    1. Enable Siri
    2. Passcode -> enter password
    3. Disable voice dial
    4. Disable Siri

  • HT4864 how do I turn off auto reply "I'm away from the office........."

    How do I turn off Auto reply "I'm away from the office..................         '

    Go to the mail page at http://icloud.com , click the cogwheel icon at top right, choose 'Preferences' and uncheck 'Forwarding'.

  • How to get Lion off my computer and go back to Snow Leopard???

    How do I get rid of Lion and go back to Snow Leopard PERMANENTLY?
    I am not techno.
    I need simple instructions with plain descriptions. I do not have any discs. The iMac came with Snow Leopard and I loaded NOTHING.
    I should never have bought  Lion. It is awful.
    Please someone tell me how to get Lion off my computer and go back to Snow Leopard.

    Can I use time machine to restart the machine before the fateful day when I bought and installed Lion?
    Yes, if you have a pre-Lion backup, but you need an installation disc.
    Is there anything else I can do?  more RAM?
    I don't know how much RAM you have. It must be at least 2 GB, or Lion wouldn't have installed. If that's all you have, you might get better performance by adding more. But from your description, I doubt that your problem is due entirely, if at all, to a lack of RAM. If you want to troubleshoot the problem, it will take some patience and effort, and you'll need to be in a calm frame of mind.

  • How can I turn off me restriction password if I forgot the old one

    How can I turn off me restriction password if I forgot the old one

    Only by using the correct Apple ID & password.
    https://appleid.apple.com

  • Since updating to ios7 --I turn off my iPad and go back to it later and it is on again. Has this happened to anyone else.

    Several times I have turned off my iPad  and when I go back to it later,it is on again to home page.since I keep it in a case this causes it to get hot which can't be good.this has only happened since recent upgrade.

    Granlady4 wrote:
    Mine always showed me slide screen when taken out of sleep mode.now it turns on to first app screen by itself sometimes.
    That depends on how you have set up your Auto-Lock and Passcode Lock.
    I have set Auto-Lock to 2 Minutes and Passcode Lock to Immediately.
    If you want to try the same thing, then do this:
    Settings > General > Auto-Lock > 2 Minutes
    Settings > General > Passcode Lock > (enter your passcode) > Require Passcode > Immediately
    If you don't like those time delays, choose the ones that you prefer.
    This will of course not stop any notifications to turn on the iPad's screen, if your iPad is in sleep mode.
    To modify those notifications to your requirements: Settings > Notification Center

  • How will you turn off an IPhone 4S voice over with the latest IOS

    How will you turn off Voice Over in Iphone 4S? i tried turning it off through settings/accessability/voice over but when i turned it off it always go back to ON. It is very depressing to go over with this feature. Thanks.

    on your phone go to settings - icloud - find my iphone - off

  • HT3562 how do I turn off VoiceOver?  When I go to the settings, then general, I can't swipe the screen to get down to accessibility to turn it off??

    How do I turn off VoiceOver?  I was experimenting to try it with eBooks, but now want it off.  When I go to settings, then general, the page won't swipe down to accessibility. 
    thanks,

    Same problem, I want firefox password manager GONE.

  • How do I turn off apple tv or switch back to regular tv?

    How do I tun off apple tv or switch back to regular tv?

    Go to settings - sleep now or hold down the cente button on the remote.
    Just cycle through your inputs using the TV remote to go back to 'regular tv'. Refer to your manual if unsure.

Maybe you are looking for

  • Is it possible to have 64-bit 11g Full Install and 32-Client on 1 computer?

    Here's why I ask: I have installed a full 64-bit 11g R2 install on my Windows 7 D: drive, installed two DB's, worked great. Then I realized application I need to support (Cognos 10.1) requires 32-bit client (for drivers) so I installed the 11g client

  • How can you get pictures off of your iPod?

    When I attach my iPod to my computer, Adobe Photoshop Album will "see" my videos and music/audio files on the iPod, but not the pictures. Is there a way I can import my photos from my iPod?

  • Checkbox activate/deactivate in alv grid report

    Hi All, I am using REUSE_ALV_GRID_DISPLAY fm to display output.In my output i having checkbox column based on values on internal table it will be checked and the checkbox column is editable. Now my requirement is if particular checkbox having values

  • Image upgrade failed

    Hello, We are running RME 3.4.1, when doing an image upgrade we are receiving the following error : Loading image file to flash device : rep_sw_1054534997912433081 -->  flash:c1200-k9w7-tar.123-8.JEC2.tar using TFTP Loading image file to flash device

  • Trouble sending email copy has been place in your out  box

    When I send an email, I receive a note that says "a copy has been place in your out box. Sending the message content to the server failed".  why is this happening and how do I correct it.  Thank you.