How do I turn on the drop down coupon savings tab for websites

When I went to websites it produced a drop down tab for savings or coupons at the store or site. I turned it off and now I would like to turn it back on. I can't remember what it was called or where to activate it.

By the way, the reason I say "if you trust it" is that adware is not approved by the websites and is not designed to show you deals for that site. On the contrary, the ads it shows are based on who is paying to appear in the add-on. There are many other coupon and deal sharing sites that are sourced from web users that I would trust more than adware add-ons.

Similar Messages

How do I turn off the drop-down menu on the back button?

I use a laptop and my hands aren't too dextrous. Every time I click the "back" button I get the drop down menu, which means I then need to move my hand back to the pad (slowly!) move the pointer, and try again. It can take me several attempts to go back one site now!
I have searched for hours to find out how to turn this drop down menu off, to no avail, and even looked through all the settings in about:config in an attempt to find a way around this. It seriously impacts my ability to use my laptop on the web now, so if anyone can please come up with a way to get back to the old back button, with no menu when my slow old finger cannot move fast enough to get off the button, I would be very grateful.

You can use that list and open the previous tab just above the one that appears bold and has a bullet.
The current active entry has a bullet in front of it. 
If you hover an entry in the tab session history list with the mouse then you see an arrow at the left side pointing left (Back) or right (Forward) to show the direction. 
You can left click an item to open it in the current tab or middle-click or Ctrl left-click an entry in that list to open that link in new tab, just like you can with other links.

Turning off the drop down option in a ALV grid

Hello,
I have defined a ALV grid where I defining my field catalog manually. Here is an example of one field:
gs_fieldcat-fieldname = 'DZTERM'.
gs_fieldcat-ref_table = 'VBFHAPO'.
gs_fieldcat-coltext   = text-004.
gs_fieldcat-edit       = 'X'.
append gs_fieldcat to gt_fieldcat.
Since I am trying to use the ref_table field, it has also activated the drop down menu for that field. If I take out the ref_table field, and replace it with the code below, it deactivates the drop down option.
gs_fieldcat-ref_table = 'VBFHAPO'. - Comment out
    gs_fieldcat-inttype = 'D'. - Add in
Is there a better way to do this where I can turn off the drop down option for the whole grid? I looked in LVC_S_FCAT and LVC_S_LAYO, but I did not find a setting in there that would turn this feature off.
Thanks! Bill

Bill,
To the best of my knowledge, when you inherit the attributes of dictionary objects in your grid (via your references and foriegn key relations) you will get dropdowns much as you would in a selection screen field.
There is a way of programatically changing the behavior of a cell in the ALV grid.
There are excellent examples of this in Development class (Package) SLIS
See example: BCALV_TEST_GRID_F4_HELP
cheers,
Marilyn

Recently changed my password for mail, can still read my mail, but the drop down keeps appearing, asking for my password and saying it's incorrect. Totally confused.

I Recently changed the password for mail, on iMac. I can still read my mail, but the drop down keeps appearing, asking for my password, then telling me it's incorrect. Totally confused.

If your password is accepted, and Mail connects to the account, but you're prompted for the password repeatedly, take each of the following steps that you haven't already tried. Note: these steps don't apply if the server rejects the password. That's a different problem.
Step 1
When prompted for the password, check the box marked Remember this password in my keychain.
Step 2
Check that the keychain is working.
Step 3
Check that the default keychain is unlocked.

How do I turn off the Log In Screen that asks for my Password?

I recently installed FCP 6 on my MBP, and ever since then when I turn my computer on from being shut down, it ask me for my password before loading up.
It used to not do this, but now it does. I don't have a password set, so I just hit enter and it loads, but I would like for it to go back to where it doesn't ask for the password.
Where is this setting at? All I can find is the "set password from sleep". Thanks for the help.

System Preferences -> Accounts panel -> Login Options -> click the lock and enter admin password -> click to select your accountname in left pane -> select that accountname to login automatically.

How do I turn off the multiple windows aero peek feature for CS5 on Windows 7?

I'm not sure if this only happens with floated windows but in Photoshop CS5, when I have multiple files open, each one of those files have their own windows open on the Windows 7 taskbar. I'd like it all to be combined as one like how it was in CS4. I searched through the preferences and couldn't find anything related to this problem. Does anybody know how I can turn this off?

function(){return A.apply(null,[this].concat($A(arguments)))}
JKSeidel wrote:
When I first loaded Win7, I went over the GUI changes from XP (I passed on ever using Vista) carefully.
Out of curiosity, how long ago was that? I'm guessing not long.
That you chose not to use Vista is also part of the problem. Many things in Windows 7's UI are evolved from Vista's changes. You're viewing Windows 7 from the perspective of one who has changed suddenly from XP, and that is no doubt a shock.
You also expect it to be a system that facilitates work, and that's a fundamental problem. Windows is now first and foremost an entertainment vehicle for the masses. Those of us wanting to use it for real work have to work at it to tune it up for that task.
If you sense the resource usage of Windows 7 Aero then quite possibly your computer isn't up to the task. When run with a good video interface Aero becomes smooth and instantly responsive, and that (with a few tweaks besides) actually makes using Windows quite a pleasure. It definitely can be made to get out of the way and lets you concentrate on the work.
The basic trouble is, Microsoft doesn't make changing to any new version of their operating system an easy task...
As a career computer/software engineer, I chose to understand Windows 7 from the inside-out (for the first time ever I ran the beta versions in a virtual machine, to get used to it). I've had to find dozens of tweaks and turn off a number of things that shouldn't be running.
AFTER ALL THAT I can say Windows 7 is a dynamite system, that often outperforms XP (both in compute power and in UI performance). And it's more stable than any version of Windows to date.
I can only encourage you to stay with it. It may take a year or more, but it really does grow on you. On my main Windows 7 workstation I run virtual machines with XP and Vista almost daily for development testing, so I haven't forgotten their UIs, and I sure would never want to go back!
-Noel

How can I turn off the open bookmarks in new tab setting?

Can this be done - Open up the program and I have 38 windows,,,, Help!

if you are running Lion v10.7, disable the resume feature...
Open System Preferences > General
Deselect: Restore windows when quitting and re-opening apps
When you post for help, please tell us which Mac OS X you have installed.
Thank you!

How to disable certain text fields in second tab based on the drop down selection from first tab?

My first tab contains a drop down menu which has two options
1. Personal info
2. Office info
The second tab contains all the information regarding Office and Personal Information. But I need to selectively disable certain fields based on the drop down in first tab.
For example,
The second tab consissts of all fields like
Name,
Age
Job title,
Office Location, etc.
And i dont want office related details to be displayed if I am selecting personal info in the first tab.
It would be really great if someone could send me the code for achieving this.
Thanks in advance.

Hi Vishnu
Can you check the List component in foundation/components ? I think "Build list using" works he same as your requirement. Check the listener they have used in dialog/items/list/items/ listFrom/listeners
"selectionchanged" : function(box,value){box.findParentByType('tabpanel').manageTabs(value);}
here the ExtJs will find the tabpanel with value you are selecting fromdropdown. The title of each panel should match with the dropdown values
Some queries
Disable values means you have to remove it from your CRX?
"values should become mandatory". for tab2? or tab3? - if tab2 and if it is a customized widget then u have to write it in your js only i think.
Thanks
Veena

My folders aren't showing up in my bookmark list or the drop down menu when I bookmark a site. Please advise!

I just created a bunch of folders to organize my bookmarks. When I try to bookmark a page and put it in the appropriate folder, none of my folders appear in the drop-down menu. Thanks for any advice you can provide. ~cayugakate

Turns out they were showing up, just all the way at the bottom of my list of bookmarks. I just couldn't see them. If you go to "Bookmarks"->"Organize Bookmarks" and then play around in there with highlighting on "Bookmarks Menu" you should be able to figure it out. Otherwise you just have to move them up to the top individually. Hope that helps! ~Kate

CS5 Panels acting bizarrely - unable rearrange the dock panels and cannot use the drop down menus

The panels are not functioning properly in my new version of CS5. Several things are wrong:
I cannot click a panel tab and move it. When I click on a panel, nothing happens. I tried moving the swatch panel to the bottom of the dock and I got nothing. I tried Command Click and I was able to move the swatch panel off the dock, but when i tried to re-dock it at the bottom of the panels, it would not dock in.
Also, when I try click on the menus in the panels in the dock, nothing happens. I have to click multiple times....and then the drop down menu just appears for a milisecond and then disappears....so I am not able to select anything.
Oh...and I am working in 32 bit.
Anyone have a clue what to do?

Sounds like your problem is solved.
If you look at Alien skin's website regarding CS5 (http://support.alienskin.com/Article_BB9D5.aspx), then you'll see that they state that their plug-ins are CS5 compatible, so maybe you have an old version, or maybe you want to let them know about this issue.

What happened to the drop-down boxes?

the drop-down boxes will appear for an instant then quickly reappear. This happens only with Mozilla Firefox

Click on the back/forward button and hold it, and the drop-down menu appears. I think in 3.6 all you had to do was move the cursor over the button; now you have to click and hold.

Bookmarks toolbar changed from the right side of the drop-down menu to the left. How can I change it back on Firefox 4.0.1 for Mac?

I just updated to Firefox 4.0.1. Some changes I don't like, especially that the Bookmarks toolbar opens to the left of the drop-down menu instead of the right. How can I change it?

You may have bookmarks that have long title. Firefox 4 shows the full text of the bookmark name, so if it doesn't fit with opening to the right side the Firefox will open to the left side. You can scroll through the list and make the bookmarks with a long name shorter.
* [[How do I use bookmarks?]]

I don't see the new "firefox button" and i can't see the bookmark button (with the drop down option) unless I'm in the customize toolbar view. How can I fix these?

I am using Firefox 4.0 on Windows XP home, Service pack 3. I am trying to use some of the new features of Firefox 4.0 that I see on the Firefox feature page (http://mzl.la/gCFDjj) and am not having much luck. First off in the Firefox Button. It is supposed to contain all your menu items but it is not appearing on my screen. Is this a feature that only works in Vista or Windows 7?
Second, I am trying to use the Bookmarks Button (the one that has the drop down menu) but it doesn't appear in my toolbar unless I right click the tool bar and choose "customize". The button shows up in this view already in the toolbar, as if it is hidden in normal use and no matter where I move it to, once I hit the "done" button in the customize window the Bookmarks Button gets hidden/covered up again.
Third, I see the new "App Tabs" feature but I can't seem to find an option for this in the preferences for Firefox, if it's even supported by my browser/OS at all.
Can anyone tell me how to use/activate these features or if I am even able to using Windows XP?

You see the orange (on Linux gray) Firefox button if the Menu Bar is hidden (View > Toolbars > Customize or right-click a toolbar). 
If you need to access the hidden Menu bar then press F10 or hold down the Alt key to make the Menu Bar appear temporarily. 
You only see the Bookmarks menu button if the Menu bar is hidden.

Made a drop down menu. How can I get the drop down to fade in and out? !

Hi guys!
I've created a drop down menu (with the help of you legends on here! )...Now I just need it to animate so when the user hovers over the main menu item, the drop down fades in.
Here's the HTML I have...
 <ul id="nav">
 <li><a href="#">Nav 1</a></li>
 <li><a href="#">Nav 2</a></li>
 <li><a href="#">Nav 3</a>
 <ul>
 <li><a href="#">» Sub Menu 1</a></li>
 <li><a href="#">» Sub Menu 2</a></li>
 <li><a href="#">» Sub Menu 3</a></li>
 <li><a href="#">» Sub Menu 4</a></li>
 </ul>
 </li>
 <li><a href="#">Nav 5</a></li>
 <li><a href="#">Nav 6</a></li>
 </ul>
...and here's my CSS...
ul#nav {width:920px; height:35px; list-style:none; padding:0; margin:0; background:url(navBg.jpg) repeat-x; z-index:999;}
ul#nav li a:hover, #nav li a:active {background:url(navOn.jpg) repeat-x; text-decoration:none;}
ul#nav li a {color:#E0E2E7; display:inline-block; float:left; margin:0; padding:10px 19px; width:auto; text-decoration:none;}
* html #nav li {display:inline; float:left; } /* for IE 6 */
* + html #nav li {display:inline; float:left; } /* for IE 7 */
#nav ul {width:208px; left:-9999em; list-style:none; margin:35px 0; padding:0; position:absolute; z-index:999;}
#nav li:hover ul {left:auto;}
#nav li {float:left;}
#nav li li a {width:190px; background-color:#efefef; color:#2e2e2e; padding:8px; margin:0; }
#nav li li a:hover {background-color:#000; background-image:none; color:#FFF;}
#nav li:hover {background:url(assets/images/frame/navOn.jpg);}
From what I can make out, I assume I need either Javascript or JQuery...
Does anyone know how I can get the drop down to fade in and out?
Thank you very much and I hope to hear from you.
SM

Yes, you'll need a client-side script to do fade-in/fade-out fx. Look at jQuery Superfish.
http://users.tpg.com.au/j_birch/plugins/superfish/#examples
Nancy O.

How can I restore my iphone to a backup that's not listed in the drop down menu

I updated my iphone and everything was removed. I attempted to restore it however the only backups that are available when I have the iphone logged into itunes is the one from today. How can I apply an older backup say 1 to 2 days ago to the drop down menu of the restore button? Right now the only thing that's showing up is the one for today and that's abslolutely not the one I want or need. And before the question is asked no I didn't save it to icloud.

iTunes only keeps one normal backup, per device. Thus, there are no previous backups from 1 or 2 days ago unless you restored your phone & backed up before you restored. Restore point backups are time/date stamped & are not overwritten.

How do I turn on the drop down coupon savings tab for websites

Similar Messages

Maybe you are looking for