How do I turn on the lights?

I have a Toshiba a300 notebook and I recently reinstalled windows, but now I can't turn on the light surrounding the mouse pad and the media player buttons lights. Can someone help me? I tried every thing I knew (don't really know that  much  )

Marce_fromBolivia wrote:
how do i turn on the lights in the back of the Mac Pro
I believe that if you start to rotate it in place on its base, the lights will go on automatically. The intent is to identify the ports easily, given the black color, though turning it tends to drag any connected cables too.

Similar Messages

  • Satellite A660 How can i turn off the lighting of the power button?

    Hello, I recently bought a new Toshiba A660-1FL.
    However bothers me is the lighting of the multimedia keys, if I work in the dark.
    In Bios I could turn off the led illumination, but the power on/off button is still lighting,that distracts me when i am working.
    This notebook has two power LED, so the power on lighting is in my opinion, unnecessary.
    My question is: How can i turn off the lighting of the power button?

    Here you can see the LED with the same function in front of you: http://s3.imgimg.de/uploads/t009aae62jpg.jpg
    Yes in fact, the difference is color, design, but also location and brightness of the LED.
    For me, this LED is too bright and it is distracting in the dark, as you can see here: http://s3.imgimg.de/uploads/leddf570760jpg.jpg
    I was today at a local electronics store, and saw that Toshiba has the brightest Power LED on A660, but why it must be placed under the LCD and not in the front as in my old notebook Toshiba A210.
    I also had the idea with a tape, but it would look ugly, and it must be removable without residue.
    P.S. Also the fingerprints on the glossy keyboard do not look nice.

  • Hi! Someone know about how I can turn on the light of my keyboard?

    Hi! Someone know about how I can turn on the light of my keyboard?

    Hi, thanks for your answer... but I already try and didnt work.... f2? with ctrl.. o cm..? I have a macbook air...

  • How do I turn off the "Light" Version of Outlook for webaccesse to email?

    IMAC new computer - tried to access web based email of my work email - need MSOutlook - through Safari and Mozilla Firefox on IMAC - both only bring up the "Light" version. I need the light version off to be able access all of the features needed. I can't get either Internet browser to allow me to "un check" the "Light" version box. Please help ASAP. I need to work at home and can't.
    Firefox will allow me to do it through my old PC at home, but PC locks up most of the time. Help!!!! Thanks!!!

    Hi Mlevine,
    Any files in the Creative Cloud folder get synced automatically with file sync running, you can stop the process by opening the Creative Cloud app and then from the Gear icon in the top right open the menu and select the option pause syncing. There is also an option to turn syncing off completely in the Preferences in the Files section.
    Hope that helps,
    - Dave

  • HT200154 how do you turn off the apple TV box?  There doesn't seem to be an off button.  The status light stays on.

    how do you turn off the apple TV box?  There doesn't seem to be an off button.  The status light stays on.

    Usually, when you put it to sleep mode, the status light will turn off.  To put it into sleep mode, go to Settings.
    If you want it completely off, then I guess the only way to do it is to pull the electric plug.

  • How can I turn off the green light indicator on my AirPort Express?

    How can I turn off the green light indicator on my AirPort Express? It really annoys me.

    The Zed,
    You have two options and you probably won't like any of them.
    Using the Airport Utility, click on the AE then "Base Station", then "Options". That will bring up two options for you AE green light, either keep it green at all times or only light up when it is being used.
    The second option is put some tape over it.
    Hope this helps.

  • How can I turn off the LED light? It's constantly on.

    If anyone can give me some help, that would be tremendous. How can I turn off the LED light as it's contstantly turned on???

    If a reset does not work, then the next steps in user troubleshooting are restore from a backup and if that doesn't work, then restore as a new device. If that doesn't work, then you can make an appointment to take the device to the Apple store and have the hardware checked.
    If you live close to an Apple store, you could go there first, but they will probably ask if you have done a restore and would do one there, so make sure you have backed up and synced all of your data.

  • How do I turn off the camera lights when recording a video with the Android Turbo?

    I want to use the Andriod Turbo camera video function in ambient lighting using the forward lens.  But when I start recording both lights stay on.  I can video with ambient using the look back lens.  Not as good a quality and harder to aim.
    Is there a setting that can turn off the lights until I want them?  How is it done?
    Thanks for the help.

    Thank You!  Problem solved.  I am a new user to 'smart phones' and my original question probably should have been "How Do I Find The Camera Settings Menu?"
    It wasn't obvious, but your reply got me searching again.  I found that if you drag your finger from the left side of the screen to the center the semi-circular menu appears on the left.  There I found the light control and other options.
    I didn't know it existed and the manufacturer's manual that came with the phone gave no instructions on the camera operation.
    abcdefg4, your comment helped me search a little harder.  Thank you again.

  • How to turn on the light for when a call comes in ?

    how to turn on the light for when a call comes in?

    Settings>General>Accessibility>Hearing>LED Flash for Alerts>Off.

  • How do I turn off the shading on the first row of my Table?

    I have to type a lot of information in, and managed to get a "Table" going in my Pages Document.
    Unfortunately, and for a reason that seems to be inexplicable to me, the top row of the table is shaded. Sort of like a Half-tone or Zippatone sort of graphic effect. Or whatever you call it. Maybe a lot of people like that sort of thing, but not me.
    How do I turn off the shading on the top row of my table?

    The top row of the table is a header row, the 1st column is too. They are both light grey to differentiate them from normal rows and columns.
    If you don't need the special headers you can remove them. Select & right click Delete works as does turning them off using the table icons on the right of the format bar.
    If you need the headers but don't like the colour just remove it via the fill option on the format bar and in the inspector.
    The pdf guide will help to get you up to speed too.

  • Turning off the lights inside the PC

    This computer glows brights red. How do you turn off the infernal red lights inside the PC?
    This question was solved.
    View Solution.

    Hello @onesa,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I have read your post on how the computer glows bright red as a part of your desktop's chassis aesthetics, and that you are looking to turn it off. I would be happy to help you!
    To find out which chassis pin to remove from your system's motherboard (which should disable the red lights), please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    I hope this helps!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • Every time I start iTunes I get the message: "iTunes exec has been set to run in compatability mode for an older version of Windows. Turn off compatability mode for iTunes before you open it." How do I turn off the compatability mode?

    Every time I start iTunes I get the message: "iTunes exec has been set to run in compatability mode for an older version of Windows. Turn off compatability mode for iTunes before you open it." How do I turn off the compatability mode? Particularly when I have to do it before I turn on iTunes.

    Try the following document, only be sure that none of the boxes in the compatibility mode tab are checked (not just the compatibility mode box itself):
    iTunes for Windows: How to turn off Compatibility Mode

  • How do I turn off the feature that allows the duplication of App downloads to more than one phone? As in my wife downloads an app and I get a dulpicate download on my phone.

    How do I turn off the feature that allows the duplication of App downloads to more than one phone? As in my wife downloads an app and I get a dulpicate download on my phone.

    To disable that feature it will depend on whether or not you sync everything in the cloud using Apple's iCloud, OR if you both use the same desktop/laptop computer with iTunes. Here is a link to the Apple support page in regards to the automatic download feature included with your iPhone and corresponding softwares such as iTunes.
    http://support.apple.com/kb/ht4539
    Follow those instructions and it will all be taken care of.

  • How do you turn on the radio feature?  I don't see it on the home screen.

    How do you turn on the radio feature?  I don't see it on the home screen.

    If you don't see the radio icon on the home screen, it is likely just turned off in the settings. Go to
    Settings > General > Home Screen >
    There you will see radio listed. Make sure that the slider is set to ON.
    i

  • How can I turn off the WLS 6.1 security in order to develop my own application-based security module?

    Dear Colleagues,
    I am currently developing a J2EE application using WLS 6.1.
    My team and I have to implement a security requirement to suit our company's needs.
    The security requirements are that, users' password need to be aged (30 days maximum) and we need to provided a GUI front-end (JSP) to allow users to change their password when these expire after 30 days.
    Our internal contacts in the company, have already taken the lead to find out about whether we will be able to use the WLS 6.1 platform to do this and the answer we got back, was.
    Now we need to develop our own security module.
    I have 2 questions:
    1. How can we turn off the WLS security in order develop our own application-based security module?
    2. How can we develop a security module that allows us to age users' password and provide them with facilities to change their passwords when these expire?
    At the moment, we are using the default BEA WebLogic login.jsp page and there some configuration in the web.xml for this. I will be grateful if you could advise me on how to turn this default security off so that we can write our own security module.

    hi,
    1.You can write your own realm in 61 which can plugged for your security
    calls.
    2. once you write your ownrealm.. you can access it through weblogic
    api/ur api..
    thanks
    kiran
    "Richard Koudry" <[email protected]> wrote in message
    news:3dd0d081$[email protected]..
    Dear Colleagues,
    I am currently developing a J2EE application using WLS 6.1.
    My team and I have to implement a security requirement to suit ourcompany's needs.
    >
    The security requirements are that, users' password need to be aged (30days maximum) and we need to provided a GUI front-end (JSP) to allow users
    to change their password when these expire after 30 days.
    >
    Our internal contacts in the company, have already taken the lead to findout about whether we will be able to use the WLS 6.1 platform to do this and
    the answer we got back, was.
    >
    Now we need to develop our own security module.
    I have 2 questions:
    1. How can we turn off the WLS security in order develop our ownapplication-based security module?
    >
    2. How can we develop a security module that allows us to age users'password and provide them with facilities to change their passwords when
    these expire?
    >
    At the moment, we are using the default BEA WebLogic login.jsp page andthere some configuration in the web.xml for this. I will be grateful if you
    could advise me on how to turn this default security off so that we can
    write our own security module.

Maybe you are looking for

  • Error: "could not complete your request because it is not a valid photoshop document"

    I was working on a PSD, which was saved to my desktop, when I decided to save it for the nth time within the hour.  As I was saving it, my laptop battery died and shut down.  After I replaced the battery and rebooted, the file was missing from the de

  • Adobe premiere elements 10 trial watermark question

    Hi there, I just had a question regarding the water mark in premiere elements 10. I know the watermark stays until I buy the full version. But if I was to find a full version on another computer. Can I take the file to the other computer to remove th

  • Error message "Library not loaded"

    I had a new (and larger) disk drive installed in my MacBook Pro, and all the files were copied over. Yet, when I try to open iPhoto, it gives error message that library is not loaded and it will not open (full error msg below). Yet, when I go to the

  • Flash: Making a Transparent Background

    Don't ever tell me that its the window mode set to transparent in the html setting in publish settings and don't tell me I need to change the html code of the published product in dreamweaver because I don't have dreamweaver. How is one to make an sw

  • [Solved] missing pacman databases

    Somehow I am missing critical pacman databases from one of the two computers I have running Arch:     /var/lib/pacman/core     /var/lib/pacman/extra     /var/lib/pacman/community     /var/lib/pacman/core.db.tar.gz     /var/lib/pacman/extra.db.tar.gz