How do I type in code for special characters within a font?
Hi, I'm using the font Aloisan New and am trying to access a character which is listed as having the number 146 associated with it. Someone told me I need to press alt-0146 to make the character I need appear, but when I do, it only produces those same numbers and doesn't seem to accept them as a single code. Can someone please guide me key by key as to what I should press and in combination with what? It would be much appreciated. Thanks
Someone told me I need
to press alt-0146 to make the character
That's garbage.
That's an extreme response. Alt-0146 It isn't garbage, that's how it works on most computers (Windows). In most cases that would have been a perfectly legitimate answer. Including on a Mac booted into Windows via Boot Camp or through virtualization. It is also perfectly understandable how they would have given such advice.
It is simpler on the Mac, though, using the Option key and the Character palette.
Similar Messages
-
I have created a book in ibooks author with a custom font when previewing on the ipad the special characters within the font do not appear?
'custom' font sounds like you may be working with a font that is unsupported on iOS/iPad.
Supported fonts are found in the pull-down font menu in the toolbar. Authors are obligated (mostly) to stick to that list. -
Keystroke combinations needed for special characters in specific fonts?
How do you see the required keystrokes to enter special characters? Very frustrating!!! Using Pages to help my wife create a brochure. We wanted to use one of the symbols available in the font "Type Embellishments One LET" (which I assume installed with Pages). In Font Book we could see all the possible characters BUT NOT HOW TO TYPE THEM. We ended up typing scores of keys and keystroke combinations to finally see the one we wanted, then use cut and paste. There must be a better way but we (along with some Mac Support people at my work) cannot find it.
Is there a way to do this without buying a program like PopChar. Seems like this should be fundamental to using a Mac out of the box.
Thank you for any suggestions.You can use "Keyboard Viewer" to see what characters are created with various keystrokes. Open the International Preference Pane, click on the Input Menu tab & click the box next to Keyboard Viewer. This will make this available in your menu bar by clicking the flag icon. Select "Show Keyboard Viewer" from the flag menu & you will see a layout of the keyboard. You can then hold down the shift key, the option key OR shift + option to see all the possibilities. The highlighted ones are the accents than you can apply to letters. To get "é" type option-e (nothing will appear), then type e. This accent could be place over most letters. You can change the font in the drop-down menu. Not all fonts will have all characters. Keyboard Viewer places the typing directly into the top, open document.
-
How do I generate redemption code for creative cloud?
how do I generate redemption code for creative cloud?
On October 27th 2014, you have purchased two CC (one complete &one photography) under the same Adobe ID. That is the reason you are being asked for a code because under one Adobe ID only one CC can be activated(twice).
Please contact Adobe Support or you can inbox me privately the CC order number that you would like to cancel.
You can also check if the host file has Adobe entry or not as if Adobe entries are there then also CC can ask for serial number. You can check the host by the followinh method.
Creative cloud do not need a serial number. it will be using your Adobe ID on which you have purchased the creative cloud membership.
So you need to login with your Adobe ID and password to activate the cloud membership.
Log out & log back in of the CC Desktop App.
In case it is not signing in successfully please try the following:
I don't know which operating system you are working on so i am giving you some steps windows and MAC OS:
Windows:
In windows 7 navigate to following location:
/windows/system32/drivers/etc
1. look out for "Hosts" file
2. Open it with notepad
3. Check if you have any entry for Adobe
4. Remove the entries and try again launching any product from CC
Mac:
1. Please click on "Go" and navigate to /private/etc
2. Open "hosts" file and check out for any entries for Adobe.com
3. Remove the entries and save the file
4. try again launching any product from CC
Please refer to Creative Cloud applications ask for serial number
Hope it helps you.
Regards
Rajshree
Cannot license Illustrator CC after buying subscription -
How to create an address code for PO delivery address?
Hi Guys,
How to create an address code for the delivery address in the purchase order? Please explain me with details.....
Thanks
Rajadelivery adress records can be created with transaction MEAN.
the number is purely internal.
In ME21N you can then search by name (you will certainly not know the number) -
How to setup a company code for material management
Hi,
While creating material in MM01, in sales org tab, when I gave plant XXXX, it is giving an error "Company code YYYY is not setup for material management".
So can you help me , how to setup a company code for material management
Help is appreciated
thanks
DILHello Sendil,
You can maintain it with trns code OMSY or MMPI/MMPV.
Hope this helps
Regards
Arif Mansuri -
How do I redeem my code for Mountain Lion OS X when I can't find a redeem button in the Mac App store anywhere please?
How do I find the redeem button? What do I have to do?Welcome to Apple Support Communities
Open the Mac App Store and press the Redeem button: -
How to view the source code for Native Method
hi
i am using some native methods in to my code ;
can anybody tell me how to view the source code for the same ;
nikBuy/acquire a C/C++/assembly code disassembler and run the shared library through it.
-
How to display the 'language code' for language dependent 'Short text' ?
Hi,
I am new to BW.
Can somebody help me with the following issue?
I have an attribute 'Material category description' and I chose short text exists and made it language dependent. I had loaded the master data successfully.
Now I want to know how to check the 'language code' for this material category description. When I display the data, will the language code display by defalult?
I had checked the text table using SE11
It displays the following fields over there.
/BIC/TS1_MCT_DS [ /BIC/TS1(InfoObject name) ]
LANGU
TXTSH
I appreciate your help!
Thank you
SekharDinesh,
I went to RSD1 -> info-object -> Master Data/text tab. It shows my language selections there (Short text selected, language time dependent etc.) with everything grayed out.
In SE16, I could display the data in the following format.
/BIC/ST_PRID TXTSH TXTMD
P01 umbrella rainyday
P02 tent waterproof
etc.
I want to see the 'language code' as one of the columns in this table.
Can you help me do that?
Thank you,
Sekhar -
How can we write the code for opening the command prompt and closing the
how can we write the code in java for opening the command prompt and closing the cmd prompt from eclipse (cmd prompt should close when click on the turminate button in eclipse)
rakeshsikha wrote:
how can we write the code for opening the command prompt and closing theBy typing in Eclipse (which you seemingly have)? -
How to create a transaction code for a function group with screen 100 as st
Hello ,
I have requirement where I need to create a function group and create screen 100, 200, 300 and include the function in the screens.
Customer asked me to create a transaction with the screen 100 as the starting screen.
Can you please let me know how to create a transaction code for a function group with screen 100 as starting screen.
[ It is not a module pool program ].
Thanks
Prashanth.
Moderator message - Please ask a specific question and do not ask the forum to do your work for you - post locked
Edited by: Rob Burbank on Jun 2, 2009 11:49 AMGo to transaction SE93, enter a transaction code that you want and click on "create". Enter a text and select the "Transaction with Parameters" button. In the Default Values section, enter START_REPORT in the transaction field. Check the "skip initial screen" box. In the Name of Screen field section enter the following lines:
Name of screen field: Value
D_SREPOVARI-REPORTTYPE RW
D_SREPOVARI-REPORT ZPCA
Save and transport accordingly. -
How to check the tran code for specific activity.
Hello friends ,
could you please let me know how to check the tran code for specific activity . AS in table , i can check , what transaction does what ? But now i need to check the transaction for specific activity .
E.g , For Administrator workbench , there is transcation like RSA1 .
thanks in advance
RegardsHi,
try the TSTC table with SE16.
Hope it helps,
MG -
How to create a Transaction code for a Report Painter Report
Hi All,
Can any one let me know the procedure as to how to create a t-code for a user defined PCA report. I have created a PCA report (copied the existing report (8a26-001) and named it as zpca and assigned the same in a new Report Group ZPCA (the group is created by copying 8a26 group) and assigned it under the library 8a2. We have added few fields required by the user to the Z report.
Now i need to create a transaction code for that zpca report. can anyone suggest how to go about it.
Useful answers will be appropirately rewarded.
regards,
radhikaGo to transaction SE93, enter a transaction code that you want and click on "create". Enter a text and select the "Transaction with Parameters" button. In the Default Values section, enter START_REPORT in the transaction field. Check the "skip initial screen" box. In the Name of Screen field section enter the following lines:
Name of screen field: Value
D_SREPOVARI-REPORTTYPE RW
D_SREPOVARI-REPORT ZPCA
Save and transport accordingly. -
Please provide the Message type ,IDOC TYPE , PROCESS CODE for Edi 990 ,214
Hi friends,
Please provide the Message type ,IDOC TYPE , PROCESS CODE for Edi 990 (Response to a Load Tender)., 214 (Shipment Status )
For shipement status i got trxstc01 for idoc type .. but its only before 4.6 version ..for 4.7 its not there .. please give the alternate for that ...
Thanks in Advance ....
If any one is provide exact answer i will give Max marks ..
Edited by: ajay KOLLA on Aug 6, 2009 8:04 AMHi,
Have you resolved this issue. If yes, can you please let me know. Im actually looking for same for EDI 867 (guess it is for summary report and need to know message type, Idoc type associated with this).
Rgds
Sudhanshu -
Message type ,IDOC TYPE , PROCESS CODE for Edi 990
Hi ,
Please provide the Message type ,IDOC TYPE , PROCESS CODE for Edi 990 (Response to a Load Tender).
Thanks in Advance.
Ajay KollaHi
Pls check the below links
1. http://www.erpgenie.com/sap/sapedi/ansi.htm
2. http://www.erpgenie.com/sap-technical/ale-edi-b2b/master-data-message-types-idoc-types
Hope this may helps you.
Regards
Sirigiri
Maybe you are looking for
-
OS: Debian 7 x86-64 Browser: FF 23.0 /opt/firefox/firefox: ELF 64-bit LSB executable, x86-64 /usr/lib/flashplugin-nonfree/libflashplayer.so: ELF 64-bit LSB shared object, x86-64 I'm running FireFox and open in it from 3 to 20 tabs . Earlier in this s
-
Need to get the download link of the software
Hi team, I will be getting the available patches which is released by Microsoft, from that I would be filtering the patches which I would like to use for my system an application but the reference link only takes to the information of the article rat
-
Hi All I wonder is there a tool on that can be used to search for art work based on artist and song title rather that album. Surly there must be something out there that can do this rather simple task, or is it that simple! Thanks
-
Start Clusterware without Starting Services thorugh crsctl command or other
Hi, I want to Start the Clusterware, without Starting the Services. i.e. the Database that are attached with the Clusterware for Some maintinance Purposes. Is there any way either through crsctl start crs command or through other. Kindly help me in t
-
Hi, I used to used a freeware video player but DW CS5 kept giving me error messages about it so I changed all my videos over by usng the insert>video>flv menu . However, now the videos all take anwhere from 4-10 seconds to actually appear on the web