How do I unblock outgoing calls
how do I unblock outgoing calls from 5c iphone
The manual expalins this:
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
Similar Messages
-
How to know all outgoing calls time?
how to know all outgoing calls time?
4SIt all depends on your carrier whether incoming vs. outgoing times even matter.
For example, here in the U.S., AT&T doesn't charge any differently whether a call is incoming or outgoing. The carrier (AT&T) accepts a text code *646# to give you a summary of your call minutes, but they're divided into "Daytime", "Night and Weekend", and "Mobile to Mobile". Those three types of minutes are billed differently here. -
How do I unblock a caller. somehow one of my contacts is blocked accedently.
Hi Loaner,
Do you have AT&T Smart Limits service?
http://www.wireless.att.com/learn/articles-resources/parental-controls/smart-lim its.jsp
If so, you would have to make those changes on AT&T's web site. http://www.wireless.att.com/
-Jason -
How can I unblock a call on my IPhone?
How can I unblock a call on my 3G I-Phone
http://itunes.apple.com/us/app/trapcall/id390131689?mt=8
-
How do you block certain outgoing calls?
How do you block outgoing calls? I know how to block incoming calls, but how do i make it to where i cannot make outgoing calls to that same certain number?
The easiest thing is to just not call the number. You can set up blocks with Usage Controls; it costs $4.99 per month:
Usage Controls FAQs | Verizon Wireless -
Hi,
I have some questions regarding outgoing calls when WAN outages occurs.
We have a 2801 router with SRST 3.3 connected to PSTN through 2x VIC2-2BRI.
I am not sure how to get the outgoing calls to work, i want everyone to hit the 0 to get a secondary dial-tone if they want to make calls through PSTN.
I guess i need dial-peers to make this work? Should i setup one dial-peer for each voice port? with a destination pattern 0.T?
I have got the incoming calls to work, here is a small post from the config.
voice translation-rule 1
rule 1 /2992/ /982/
rule 2 /^.*\(...\)/ /\1/
voice translation-profile SRST-INCOMING
translate called 1
call-manager-fallback
secondary-dialtone 0
max-conferences 4 gain -6
ip source-address 10.20.12.10 port 2000
max-ephones 12
max-dn 15
system message primary Fallback, only ext. calls.
keepalive 60
translate called 1
translation-profile incoming SRST-INCOMING
time-format 24
date-format yy-dd-mm
How do the dial-peers work? I would be glad if someone help me back on the right track again.If this was a MGCP gateway under normal wan Up/Up condition, you will need following commands to fallback to H323 mode. Thi swill be in addition to the dial-peers suggested by Brandon.
call application alternate default
or
service alternate default.
ccm-manager fallback-mgcp
And you may use the same dial peers that are used for mgcp.
DIAL-PEER VOICE 999101 POTS
PORT 1/0/0
SERVICE MGCPAPP
destination-pattern 9T
incoming called-number .T
HTH
Sankar.
PS: please remember to rate all posts! -
I have a different rate first 20 minutes and after. So I want to stop calling on the 19th minute. How can I limit outgoing call duration? Is there any addition software to automate it? Thanks.
not that i know of, you can watch your watch for the 19th minute and keep track of it or set a timer on your watch or whatever to keep track of the 19 minutes for you
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery.... -
My outgoing calls are blocked from Southern Ireland how to unblock
My outgoing calls are blocked from irelandneed to unblock them
Hi ,
Welcome to the community.
What phone are you using?
What network are you on EE/T-Mobile/Orange?
And last question are you on contract?
If you could reply with this, I will try andf get you sorted to make calls in Ireland .
Thank you. -
How can i hide my extension number when i make outgoing calls
Hi All,
How can i hide my extension number when i make outgoing calls,what configuration should i make on the call manager server.
Regards,
LesterWe use a Route Pattern that mimics the telco feature *67. The RP is *679.xxxxxxx with a Transformation mask of 000000000 (just to get beyond the individual blocking on some private lines.
-
I have a iPhone 5 and I am not able to toggle between the show my caller Id option on and off. How can I do that ??? It always shows greyed out and also because of which I am not able to make outgoing calls. So please help
Not all carriers allow that to be set using preferences in the phone. Contact your carrier.
-
My 4s has no sound on most of the outgoing calls i make. It will ring the other phone I am calling but I cannot hear it nor can they hear me when they answer. Its just dead air but my phone timer is in use. How can this be corrected?
It's very possible that you have stuff running in the background that you don't even realize you have running. For example the default is for all notifications to be on and you usually need few to none of them.
That said, while an iPad can run warm, too hot to handle isn't right. ALso you should get about 10 hours....depending on what you're doing of course. If you're doing processor intensive stuff, like gaming and videos it can drain faster and generate more heat.
I would say if you have an apple store near by, make an appointment and have them check it out. If the issue is due to what they determine to be manufacturer's defects then it could fall under the warranty. But that's up to the store to determine. -
When making an outgoing call from my i phone, an icon of a microphone with a slash across appears. I can hear the recipient speakin but he cannot hear me. What has been turnedd off, and how do I turn it on?
I think mute is on, tap the microphone icon with the slash running through it
-
How to calculate the overall outgoing call duration in a month?
I have seen Call register & similar items in all the phones. But, in my iphone 4, there is NO OPTION for me to calculate my monthly outgoing minutes / seconds (mine is per second billing). Due to this, I exceeded my quota in my last month bill & I had to pay it UNNECCESSARYLY. It had never happened to me before & I was able to be in control of my bill with my Simple nokia phone earlier. I was searching for App, but the reports say that the available app, does not take the 'seconds' in to account & it has to be run in the background & it substantially reduces the phone performance. I can't understand WHY APPLE cannot give this simple feature, so that the Customers can be in control of their bills. Right now, this is only going to benefit the Carriers.!! If some one found / knows how to find overall outgoing minutes (with seconds usage included) in inphone4, please let me know!!??????
Hi Sairam,
Pls follow the below link to calculate variables for MTD in the webi side
Month to Date and Year to date calculation | SCN
Hope it helps,
Sundar kumar -
How to enable vibration when an Outgoing call is a...
How to enable vibration when an Outgoing call is answered.
Any chance Nokia can update the device with such feature i used to have it on my HTC HD7 really goodHi Bakkal,
Welcome to the forum!
May we know the model of your device? We appreciate your feedback; however, this feature is not present on Nokia devices. If you're using a Nokia Lumia phone, you can post your suggestion here:
http://windowsphone.uservoice.com/forums/101801-feature-suggestions
Let us know if you have another concern. Hope this helps. -
My husband and I have separate phone numbers for our business but need to keep track of incoming and outgoing calls; however, by end of day many numbers have been automatically erased from our phone. How can we find those deleted numbers?
I believe the total amount is 100 calls that will list.
No way of changing that.
Maybe you are looking for
-
Up and down arrow keys are not working properly when using SQL CLI on Linux
Every time I hit up, down, left, and right arrow keys to return to a previous sql command I got ^[[D, please any hints to fix this issue? The backspace works fine with me. I tried to use stty to fix this issue with no luck. Thanks Mohamed
-
Publication filter with a lot of data
Hello, I have a webi report that shows the following information for servers: * File system on the server and their usage during the last month * CPU usage during the last month * RAM usage during the last month I need to produce a report by server.
-
I am on the CIMC and when I select Launch KVM Console, I get a pop up a Do you want to continue ? I select Continue It goes to starting application, Verifying application. ( takes about a minute ) then pops up a Do you want to run this applicatio
-
iphone 4 just replaced because it would not charge and now i have no audio during calls all other sound works fine was doing the same on ios 5(what the phone came with)
-
Have a disabled ipad due to my daughter can not remember her password. Went into itunes to reset password and it says we need a password....which we do not have. How do we reset her password?