How do I understand that notebook has glossy or matte screen from product's sheet or description?

see the topic name.
Not long ago I ordered a new Toshiba Z935 ST3NX1 via toshibadirect.com and finally get it with matte screen, but I was sure that TrueBrite technology implies glossy screen.
How do I know from data sheet what type of screen a notebook has - matte or glossy?
Thanks,

I am not sure. Your specs do say TruBrite. I would suggest calling Toshiba support to check with them.
Qosmio X875 i7-3630QM, 32GB RAM, OCZ SSD Qosmio X505 i7-920XM, PM55, 16GB RAM, OCZ SSD
Satellite Pro L350 T9900, GM45, 8GB RAM , Intel 320 SSD (my baby) Satellite L655 i7-620M, HM55, 8GB RAM, Intel 710 SSD (travel system)

Similar Messages

I want to make all my caller id pics full screen how do i do that? When i download a picture from my phone it makes it full screen then it goes back to the small photo in the upper right hand corner how do i make them stay full screen help please:-)

I want to make all my caller id pics full screen how do i do that? When i download a picture from my phone it makes it full screen then it goes back to the small photo in the upper right hand corner how do i make them stay full screen help please:-)

@Naiks, having suffered through unsuccessful synching attempts for Calendar and Contacts myself, l would suggest you try the following:
UNINSTALL iCloud control panel from your PC. Seems silly, but do it.
Go into Outlook, and look at the very top menu. Click FILE, then ACCOUNT SETTINGS, then click the popup box.
You will see a list of all your email accounts. Make sure that ONE of them has a checkmark against it. If not, select the account your want as your default, and click "set as default.
Exit out of Outlook and reboot your machine.
Now reinstall iCloud, check CALENDAR and CONTACTS, and do as instructed when prompted.
Reboot for good luck and now launch OUTLOOK. All that remains is to locate your iCloud Contacts and Calendar files, and make them your default.
IMPORTANT: Don't panic if you can't find your contacts -- they're there. Click CONTACTS and you'll see you have several available contact files. Locate the one label "iCloud" in grey type. Right-click on it, select PROPERTIES, then click the Outlook Address Book tab. Check the box that says something like "Make this my default Outlook Address Book." Keep clicking "apply" and "okay" until you've exited out of the dialog box maze.
You may have to do something similar with your Calendar files. I dd not, but if you need to, do it.
Everything should now sync pretty seamlessly.
I didn't have the exact same problem as you, but my dilemma was close enough. Good luck!
Arthur P. Johnson

I bought the iPad and got it home and when I turned it on, all I see is the iTunes logo w/ a usb connector and arrow. How do I clear that and go to the home screen??? HELP!

i bought the iPad and got it home and when I turned it on, all I see is the iTunes logo w/ a usb connector and arrow. How do I clear that and go to the home screen??? HELP!

You need to Set Up the iPad... Connect it to iTunes...
See here for Getting Started...
http://www.apple.com/support/ipad/
and here...
iPad User Guide iOS 5
http://manuals.info.apple.com/en_US/ipad_user_guide.pdf

I have OSX 10.5.8 how do i update that so i can sync with current apple products?

i have OSX 10.5.8. How do i update that so i can sync with current apple products?

Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion - System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
         See App Compatibility Table - RoaringApps.
     For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

How can we take the cursor to a different sub-screen from the BADI?

Hi,
We have to do some validation on Header, Operation and Relationship of any work order (IW31, IW32). We have checked that validations can be done at BADI WORKORDER_UPDATE in the method u2018AT_SAVEu2019. But user wants us to take the Cursor back to the field and screen due to which the error is coming. How can we take the cursor to a different sub-screen from the BADI?
Thanks in Advance,
Pranav

You 'ran out of room' because you tried to put your entire question into what is the 'Topic line' of the post.
This is a fairly common error, as a scan of the topic list will show, and likely due to a design flaw in the layout of the composition page.
Most posters who make this error do so on their first post, and are able to avoid a similar misstep on their second and subsequent questions.
Regards,
Barry

I spend lots of time staring at LP7...Glossy or Matte Screen??

Hey everybody. OK, I know this isn't exactly a LP7 forum issue so much as it is a MacBook forum issue bought thought it applies to all of us who are investing and have invested in the new intel technology provided by Apple.
Glossy or matte screen? That's what I'm trying to decide on and I know there are some opinions floating around this forum that I'd like to hear! I'm spending more and more time in front of my LP7 and want to know, as I am purchasing a new MacBook Pro, if the glossy screen would help, hinder or really make no difference to my working environment. It seems enticing and easy on the eyes and I'm planning on ordering the glossy but don't want to regret my decision because I'm already accustomed the the matte screen on my titanium.
Any thoughts? Please share! Thanks

I had the same question but decided to go for the matte screen. The glossy screen is nice for photos, but the reflections get in the way. Whatever gains you get with the glossy screen in terms of color is not very relevant for Logic or audio software in general, isn't it?
Hens Zimmerman
http://soundsgoodpodcast.com

Ordering a Macbookpro - Glossy or Matte screen?

I am going to order a new macbookpro - But I want to know should I order the glossy or matte screen? The biggest disadvantage I can see with a glossy screen is that it is so reflective.
So I would like the opinions of aperture users.

The best advice :
Go to an apple store and compare both screen (open aperture on both MBP).
I did this and I chose the matte screen because of the reflexion, the calibration issue (lots of threats on the net about calibration on matte Vs glossy).
With Glossy you really have to be in front on the screen because the colors are changing a lot if you moving your head.
And last but not least, I never see a pro glossy LCD. Should be for a reason
But it's a personnal taste

Glossy or Matte Screen

What is the difference between Glossy and Matte screens?

The difference is that the new glossy screens have richer color than ever before; the problem is that you may never enjoy all that fancy new bright color. The glossy screen, in addition to enhancing the screen's vividness, also increses reflectivity. If you sit under or near a flourescent light, say in an office or classroom, the screen will show you a reflected image of that very flourescent light, which competes with the projected on-screen image.
To offset this problem, I recommend one of three things:
(1) turn off the lights, if you can
(2) spend an extra $700 on the Macbook Pro, and exercize your option to purchase a matte screen
(3) buy the now obsolete iBook
I also recommend being vocal about your screen preferences. Perhaps the open minded folks at Apple will realize the folly of their ways. Its uncharacteristic of them to abandon one of the characteristics that distinguish Macs from PC's to the user's benefit. Shouldn't there at least be an option?
Macbook

How do I know that Foxfire has found a virus/trojan? I see the foxfire logo, but when I click on the protect button, it wants me to download an other site.

I logged on to Foxfire, Google then did a search for a pattern for a Belly Dancers hip scarf with bangles. After checking out a few sites, a Security Alert appears on my screen with the FOXFIRE logo and a list of Virus/Trojan with critical and high risk. At the bottom of this Alert it request that to protect I click button. When I do an other window pops-up requesting me to download a site that will remove the virus/Trojans. It said if I don't my computer will crash. I have not done this, but in the past I had something like this happen and I downloaded a site that requested that I pay money, before they would remove virus/Trojan. My question is HOW DO I TELL IF THE SECURITY ALERT IS FROM FOXFIRE and how to remove the virus/Trojans that Foxfire has discovered.

Hi Im Alexander and i will be helping you today
That is dangrous when you clicked on the link you got a virus and its already installed on your computer to see how it works click on this link http://www.youtube.com/watch?v=F4fI9B9VXB0 (if it dosent work copy and paste it in you adress bar) and to download the virus protection click this link http://download.cnet.com/Malwarebytes-Anti-Malware/3000-8022_4-10804572.html if it dosent work copy and paste it in your adress bar !!!!!!!!! if you have any questions email me at [email protected]
Thanks

How to find out that sequence has finished loading?

Hello,
i have a custom C#-OPUI to load and execute testplans.
I do this using these funtions:
1. ApplicationManager.OpenSequencFile(filename)
2. ???
3.Command TestStart = axSequenceFileViewMgr.GetCommand(.......)
TestStart.Execute(true)
The question is now: How do i know that the OpenSequenceFile has finished doing everything?
I need to know that is finished before i run the execute-command.
Is there a specail final-event that i can check?
Thanks for help
Solved!
Go to Solution.

Hi jigg,
Thanks for the info.
In my sequence file, besides the main sequence, I also enabled "SequenceFileLoad" callback. In "SequenceFileLoad" sequence, I added some instruments initialization tests. The goal is to initialize the instruments only once when the sequence file is loaded. Therefore I need to know when the "SequenceFileLoad" is finished or when the sequence file has finished loading.
My first idea is to use the event "axApplicationMgr_SequenceFileOpened", but I found that I will catch this event before the "SequenceFileLoad" execution finished.
And then, I also found that together with the execution of sequence "SequenceFileLoad", there are 2 events in my C# code: "axApplicationMgr_StartExecution" and "axApplicationMgr_EndExecution" triggered. So I was thinking may be I can use "axApplicationMgr_EndExecution" to determine if the sequence file has finished loading. But the problem is every sequence execution will trigger these 2 events. The main sequence will also trigger these 2 events. So I needs to know the name/ID of the current executing sequence.
So Is there a way to read current executing sequence name?
Thanks and regards,
0049

How can I verify that iCloud has all my data?

I'd like to make sure that iCloud has my contacts accurately copied. Is there a way to make sure that the date here (in one of my 3 devices - Mac, iPad, iPhone) is the same as the data there (the iCloud)?

Welcome to the Apple Community.
I'm not sure that's possible. Yo could check the dates on your mac but i don't know how you'd compare them to your iOS devices.

How do i get that bar to appear on the screen for http and web pages?

How do i get that bar to appear on top of the screen for http and web pages?

Yes im using safari version 5.1.2 (6534.52.7) I have tried clicking show toolbar from the view menu but i still can't see it. It's the bar where you type in a website link or http:// that I can find - any other suggestions much appreciated

Glossy and Matte screen change?

I have a glossy screen, but I really want a matte screen. Now that the 15 inch Macbook has the matte option, is it possible for me to hand my MBP to any Apple centre and have them change the glossy screen to a matte even if I incur a cost?
If so, is it possible to do it here in Hong Kong?
Thank you,

Welcome to Apple Discussions!
Not sure if Apple itself would do this, but it's possible that an AASP would. You would need to ask. It would likely be expensive, as you should expect to pay for the display plus the installation cost. I doubt very much that anyone would just exchange the displays for a labor charge.
Good luck!

How can I test that index has helped me

Hi all,
It is called that to increase performance, an index could be created at table.
However how can I see the performance.
Thanks.

Hi,
Basically INDEX works like Pointer in C language. It will point to the addresses of the records which satisfy the field values in the INDEX. So searching for direct address is much easier than searching whole data base.
U can take an example of searching for a person in the company data base. If u give the person name then there may be somany persons with the same name so u have to filter the output as per ur requirement to find the exact person. Rather if u give Employee number then it will directly return single record. INDEX will also works in the exact way.
How to test
Create one sample program to test(Select statements with out using INDEX). First Go to ST05 and on SQL trace, Execute your program, Trace off in ST05 and Analyze ST05.(Data base time, application server time etc).
Now change ur select statements by using INDEX. Do the same thing above. Then u will come to know how effective the INDEX is.
There is another command to know the execution time of the select.
Use GET RUN TIME command before and after execution of some select query with and with out using INDEX. The difference time will be the execution time of that select. In this way also u can analize.
Thanks,
Vinod.
Edited by: Vinod Kumar Vemuru on Mar 4, 2008 8:17 PM

HOW DO WE KNOW THAT WHO HAS DELETED THE CLIENT

I WANT TO KNOW ON WHICH T.CODE WE CAN KNOW WHO DELETED OR MODIFIED OR CREATED THE CLIENT

Hello Kiran,
Yes it is. As I said in SCC4 goto UTILITIES-->CHANGE LOGS. That should help you out. it basically takes you to RSTBHIST which has change logs for all the tables for which logginjg is active.
Haven't you checked this alrerady ?
With regards.
Ruchit.

How do I understand that notebook has glossy or matte screen from product's sheet or description?

Similar Messages

Maybe you are looking for