How do I "Unforget" a network?

I accidentally "forgot" my internet connection for my home (done by following path: network-manage known networks - forget this network?) now every time I want to connect to the internet it asks for my password instead of entering it automatically.
How do I fix this???
Thank you!!

Hi,
check as the following steps:
open search, type "services.msc" open services.
Scroll down to "wlan auto config" right click, stop the service.
Navigate to
"C:\ProgramData\Microsoft\Wlansvc\ delete everything in this folder leaving only a folder called "profiles" delete everything in the "profiles" folder except for a folder called "interfaces" delete everything in the "interfaces" folder)
Restart "wlan auto config" connect to your wireless network, enter
your passkey, (ensure the connect automaticly box is checked)
Restart your computer job done, your computer will now connect to your wireless network automaticly on boot.
Karen Hu
TechNet Community Support

Similar Messages

I am trying to figure out how to merge my AD network account.

I am trying to figure out how to merge my AD network account with my Mac account. The main reason for this is wanting to log into my admin account on the Mac, and have it also log into my network account so I do not have to log into differing accounts depending on wether I am on the network or not. And I am going to be running VMware fusion with windows on top, so having one account would be essential to this.
Thanks.
P.S. I am brand new to Apple, not by choice. ;-)

Basically I want to link a network account to a local account, so that I always log into the same account, even if I do not have network access....

How do I change the network settings on my Apple TV? We have two wireless options and need to switch.

How do I change the network settings on my Apple TV? We have two wireless options and need to switch.

Welcome to the Apple Community.
Settings > General > Network > WiFi and select your network.

The wifi has been lost or disconnected on my iPad. It's the iPad 2 and has not been updated yet. It's IOS 6.1.3 .. how do I add a network back onto it? I have typed in the name and chosen each of the securities and still hasn't connected!

The wifi has been lost or disconnected on my iPad. It's the iPad 2 and has not been updated yet. It's IOS 6.1.3 .. how do I add a network back onto it? I have typed in the name and chosen each of the securities and still hasn't connected!

Hey there Luba_kalstad,
It sounds like you are unable to join your network and cannot see it in the Wi-Fi list in Settings. I would try the troubleshooting outlined in this article named:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Be sure you're in range of your Wi-Fi router (access point).
Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your Wi-Fi setting is dimmed, follow these steps.
Confirm that your Wi-Fi router and cable or DSL modem are connected to power, turned on, and connected to the Internet. If not, refer to your network administrator or Internet service provider (ISP) for assistance.
Restart your iOS device.
Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
Tap and Forget this Network.
Try to connect to your desired Wi-Fi network.
Note: You may need to enter your Wi-Fi password again if your network requires one.
Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
Update your device to the latest version of software.
Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
And this section down toward the bottom if needed:
Unable to locate a Wi-Fi network
Verify that the network is available by tapping Settings > Wi-Fi and choosing from the available networks.Note: It may take a few seconds for the Wi-Fi network name to appear.
Move closer to your wireless router (access point) and attempt to locate the Wi-Fi network.
If you do not see the network you would like to join, you may be attempting to connect to a hidden network. Learn how to join a hidden network.
Supported Wi-Fi configurations vary by iOS device model. Find out which standards your device supports3.
Reset network settings by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including:
previously connected Wi-Fi networks and passwords
recently used Bluetooth accessories
VPN and APN settings
Thank you for using Apple Support Communities.
Take care,
Sterling

How can i share my network from timecapsule to other devices. The thing is i can use access internet from my macbook only.

I have recently got a Time Capsule with my Macbook pro retina 15". I am trying to setup my time capsule as a wifi station at my home. But the thing is I can only access wifi from my lap only.
How can I share my network from timecapsule to other devices, and im using OS X 10.8.2
Please help me!
Thanks in advance!
(sorry for the bad english)

How is the TC currently connected into the network?
It should work fine in bridge and create a wireless network.. it should already be able to share the network without being the main router.
Setting up wireless from wireless is difficult.
I would recommend you buy the USB to ethernet cable Apple sell as an accessory for Air and MBPr so you can actually use ethernet when required.

How can i print a network configuration page , i need the IP on a ph1510

how can i print a network configuration page , i need the IP on a ph1510

Hi,
What is the exact printer model?
If it is the HP Deskjet 1510, this is a USB printer and it does not offer any network capabilities.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

How do I connect a network printer to ipad 3. I have a HP LaserJet P2035n. It is a network printer. Not Wireless.

How do I connect a network printer to ipad 3. I have a wireless router on my LAN. I have a HP LaserJet P2035n which is a network printer and it is connected to the LAN. The printer is not on the AirPrint list. The printer is not wireless.

Hello,
I am using a Mac with this router. Any ideas how I can set it up to print wireless. Im not a tech person so this gets confusing for me sometimes.
Thanks!

How to setup a infiniband network

How to setup an infiniband network??
Our Customer has 2 x t5-4 wirh ZS3 using infiniband. Do you have any white paper where explain how we can do
Thanks in advance

Perhaps you can start with the product documentation for those T5-4 systems:
http://docs.oracle.com/cd/E29659_01/index.html
When you are on that page, find the Search field at the top and type "infiniband" into it.
You might find additional information specific to the hardware by doing that.

I hit Forget Network and now cannot get back onto my wireless home network. All of my other computers and iphones are fine. How do I get the network back? It shows in my list of networks but when I use the password and try to join it says not connected.

I hit Forget Network and now cannot get back onto my wireless home network. All of my other computers and iphones are fine. How do I get the network back? It shows in my list of networks but when I use the password and try to join it says not connected.

See if the iPad will accept the password after you restart it. It's worth a try.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
You could also try a reset as well.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

TS1819 Mac OS X 10.7.4. How do I configure my network settings so I don't have to enter the password to my wireless router every time I start up or come back from sleep mode?

When I first got my MacBook Pro my wireless network at home (Linksys Wireless Router) popped right up and I entered the password and had no problems automatically connected after that. I went to a friends house this weekend who also has a wireless router named Linksys, obviously with a different password. Ever since I connected to her network I have to enter my network password at home everytime I start my computer up or wake it up from sleep mode.
My questions is what caused this to happen and how do I reconfigure my network settings so that I don't have to re-enter my password all the time?
Thanks

When I first got my MacBook Pro my wireless network at home (Linksys Wireless Router) popped right up and I entered the password and had no problems automatically connected after that. I went to a friends house this weekend who also has a wireless router named Linksys, obviously with a different password. Ever since I connected to her network I have to enter my network password at home everytime I start my computer up or wake it up from sleep mode.
My questions is what caused this to happen and how do I reconfigure my network settings so that I don't have to re-enter my password all the time?
Thanks

How to find out what network an iphone is locked to.

How to find out what network an iphone is locked to.
Assist.

The previous owner/seller didn't provide this info?
What does it say at Settings > General > About > Carrier?

How do you abort automatic network configuration setup to start fresh?

Hello all -
I am the sole user of the sole Sun workstation where I work. We recently switched from a DHCP network to one which requires static IP addresses on our machines. I did a sys-unconfig to set the network to a "blank" state and rebooted the machine. I was told to randomly select an IP address of the form 192.168.2.XX. Having done so, I managed to choose an address that was being used by another machine. So here is where the problem begins.
Now when I reboot the machine, the machine complains 3 times as follows:
"WARNING eri0 has duplicate address 192.168.2.XX (in use by 00:1d:09:76:25:da); disabled"
and then begins again to try and configure the network (asks if I have a subnet, if I want to use IPv6, etc). However, the configuration process does not start from the beginning (i.e. does not ask for a host name or static IP address, it just skips to the subnet question). As I go through this process, the system eventually says:
"The IP address previously set on the network interface is no longer available. The system state is corrupted. System identification can no longer continue. Press Return to continue".
Pressing Return simply repeats the above message and I appear to be stuck.
How can I abort the network reconfiguration process? I'd like to do a sys-unconfig once again and try a different IP address.
I'm using a SunBlade 2000 with a Sun keyboard and a Sun monitor running Solaris 10.
Thanks very much, Lynne

Boot into single user mode: "boot -sw"
If you entered everything correctly but the IP address, you can just change the IP address by editing /etc/inet/hosts and /etc/inet/ipnodes.
Otherwise run sys-unconfig again and start over.

How can I use Guest network when my internal server provides the DNS?

How can I use guest network when my internal server provides the DNS? The help article TS4505 tells me to enter an external DNS server, but I believe I can not configure my network that way...

Apple assumes that you will be connecting the Time Capsule to a simple modem....and.....that the Time Capsule is configured as a router to provide DHCP and NAT services for the network.
The Guest Network cannot be enabled correctly unless the Time Capsule is in charge of DHCP and NAT services on the network.
Another way of saying the same thing is that the Guest Network will not operate correctly if the Time Capsule is configured in Bridge Mode or DHCP Only.

How can I scan my network to determine which PC is using static IP or DHCP?

Hello friends,
I`m using Spiceworks for couple of days alreadyand need some help on this - In another post i saw that via SpiceWorks I can see how many PCs are using DHCP or Static IP (http://community.spiceworks.com/topic/37663-how-can-i-scan-my-network-for-static-ip-s-without-checki...) but is for previous version of the program. Currently I`m running version 7.4.00059.
Can someone point me in the right direction where can I fing this information?
Thank you very much for the help.

Get a sneak peek of VeeamCloud Connect Replication– Veeam’s new DRaaS technology for service providers:• Leverage the Veeam cloud gateway to set up customer connections, without the need for VPN.• Use proven Veeam replication technology to create standby VMs.• Use Veeam network extension appliances to give customers seamless connections between their production and DR sites.• Allow customers to start failover in a complete self-service way from a mobile-friendly web portal. See you 7/7. -- http://go.veeam.com/webinar-delivering-draas-veeam.htmlNote: This webinar is for service providers. If you’re a Veeam customer interested in using Cloud Connect Replication in Veeam Availability Suite v9, check out this on-demand webinar:http://www.veeam.com/videos/fast-secure-cloud-based-disaster-recovery-veeam-cloud-connect-6345.html

How can i get the network my iphone4 is locked to?

how can i find the network my phone 4s is locked to..?

Surely you must know who your carrier is? Who bills you?

How do I "Unforget" a network?

Similar Messages

Maybe you are looking for