How do i unforget a wifi network?

I know I've seen this question answered however, I tried that and it does not work. I tried turning off my iPhone and turning it back on in Airplane mode and then working up to finding the network to no avail and when I type in the network credentials I still cannot locate the network.
Its my home network so I know it works and before I did all of this I could find it no problem. Just one slip of the finger and now its gone.
Will I have to reset my iphone to factory settings?

Ask the people in your office who are responsible for the network.

Similar Messages

How can i delete a wifi network?

how can i delete a wifi network?

deroco wrote:
Thank you but I tried that and it still shows up as a network. I live out in the country and shouldn't have any other networks close. I am afraid of a security breach.
As far as networks showing up when you right click the WiFi icon in the Menu Bar, you will always see those that are close by. I know of no way to hide or remove those.
What leroydouglas provided is correct to remove any WiFi networks you have previously connected to.

How do i find the wifi network and password for iphone 4s

how do i find the wifi network name and passwordfor iphone 4s?

Well Netgear will not know your password. The factory default user name for netgear is usually admin and the factory default is password is password. Go to an internet browser and in the url windo type in 192.168.0.1 and if I am right a login window will appear. Try the factory defaults.

How do I check a wifi network on my iphone 4S ?

I was in a Dennys restaurant that boasts a free WI-FI network, but couldnt logon to it. The iPhone saw the net but would not join it. No-one else could get onto the network either. This has happened in other locations too.
My home network is via the Telus phone line. I noticed that on this network, according to Speedtest.net, the internet speed is not very good, i.e. download 5.96 MB, Up 0.43 Mb/s, ping 62ms
Thanks for any ideas on making it easier to join free networks that wont be joined, and speed up access on a slow networks

If others are having problems getting on the network, it's probably a problem on the network, but I think you understand that. If the network is broken and it doesn't belong to you, the only way to 'bypass this' is to disconnect from the WiFi network and use 3G. That or complain to the manager... I doubt that will do you much good. They can barely figure out how to fry eggs, much less do anything with their network.

How do I remove a wifi network account from iMac? Or how do I encrpyt an open wifi network account to make it secure?

Somehow a wifi network connection has been created either on my airport router or iMac or iPad which is non secured, I.e. Open. I cannot workout how to delete it or make it a secure connection. My concern is that other users may able to access my computers via this open wifi connection.
What can I do to correct this?

click on the wifi icon and go all the way down to network preference click and open it once you on network window on the bottom right there is a advance icon click that then you should be able to delete all the network that your mac is remember.
hope this is help.

How to create a bigger wifi network?

Hello,
I am a macbook user and I have a virgin superhub in the front room in my house, can I put a airport express at the back of the house and connect to the virgin superhub to get a bigger wifi network and maybe get a wifi signal in the garden?
thanks for any suggestions.

but I could do it with 2 airport express units?
Yes, one AirPort Express would need to be located in the vicinity of the hub. In order to extend wirelessly, the second AirPort Express would need to be located approximately half way between the first Express and the garden area.
Any walls, ceilings, or other obstructions in the signal path between the AirPorts and the garden area will really absorb the signal quickly, so you will need to minimize obstructions as much as possible.
You never really know how well....or if....wireless connections will work for your purposes until you try things out in your home. For that reason, if you decide to give it a try with two AirPorts, it might be a good idea to understand the store's return policies before you buy.

How can I create a wifi network

I have created a wifi network, and also connected with my ipad, but it does not work, just connect. what I should do?

search the Internet. https://www.google.com/search?q=how+to+set+up+a+wifi+network

How to "forget" previously used WiFi networks

Can anyone suggest how to remove the use/name of a wifi network I have used previously from the "connect via" screen when I want to connect to the internet or something like that.
I have applied a filter in the WLAN wizrd (which I think should block it, unless someone can tell me differently) but it still gets listed.
This happens when im around the network or not.
This is on the E66, but also applies to the E71.
Thanks
Solved!
Go to Solution.

There are always minor differences in the menus for different phones. The menu structure I quoted was for the N96.

How would I contain guest Wifi network in firewall?

I would like to implement a guest wifi network on my preexisting private network and can't figure out the security on my firewall. Currently the link connecting my private network to the internet is functioning fine and I really don't want to change this link into a trunk as I believe trying to reconfigure the trunk and security lists in the firewall would cause downtime. I would like to use a second interface on the firewall (5520 ASA with 8.2 software) as a trunk interface for my guest network and any other new VLAN in the future. My main concern is at the Core of my network the default gateway is the private IP for my internal firewall connection. If the guest network is connected to my core device going to the ASA, how do I specify a second default gateway on the core for the guest network on the ASA?
After writing this I realized, what if i connected a switch directly to the second trunk interface on my ASA and then used this IP as the default gateway for the guest network? I believe this should work but this leads me to one more question:
Say I wanted to allow my quest network access to a specific server on my internal network, would a proper configuration be to setup the ACLs on the firewall, allowing them to communicate to my inside network?

Hi,
Yeah I suppose changing the existing interface to a Trunk would not be possible without somekind of downtime unless you used an untypical configuration.
Sadly, my personal knowledge of wireless networks and the devices is almost nonexistent as we have different people to handle setting up those.
But I would imagine you can use a separate Vlan for the Guest Wifi and bring that Vlan to the new ASA interface only. If your actual core switch is doing routing, in other words if its acting as a L3 switch then you should probably add the Guest Wifi Vlan only as L2 to the core switch and configure it all the way to the new ASA Trunk. Default gateway as you say would be the IP address configured on the ASA itself.
Controlling the traffic from the new interface on the ASA should be pretty simple.
access-list GUEST-WIFI remark Allow traffic to internal server
access-list GUEST-WIFI permit tcp host eq
access-list GUEST-WIFI remark Deny All traffic to Internal networks
access-list GUEST-WIFI deny ip any
access-list GUEST-WIFI remark Allow All other traffic
access-list GUEST-WIFI permit ip any
access-group GUEST-WIFI in interface
The above ACL first allows some traffic to a certain internal server with a certain service. It then blocks all other traffic to the internal network. Finally it allows all other traffic. That would be all traffic destined to external public networks.
Naturally you would need possibly Static Identity NAT configurations (since you are using 8.2 software) to enable connections from the Guest Wifi to Internal network.
- Jouni

How do I delete old wifi networks from appearing in the wifi icon in the menu bar.

Just bought a new Airport Time Capsule and is up and running OK.
When I click on the wifi icon in the menu bar all my old wifi networks appear
which are then viewable by neighbours although the networks themselves are PW protected.
In system preferences>network>advanced I have deleted all my old N/Works allowing only
my new one to appear.
How can I delete the old networks I no longer use from re-appearing in the list under the wifi icon?
Alan

When you delete old networks in System Preferences > Network > WiFi > Advanced, be sure to click the OK button, then click the Apply button in the next window that appears.
You also need to delete the old networks in KeyChain Access as follows:
Open Macintosh HD > Applications > Utilities > KeyChain Access
Click on the name of an old wireless network to highlight it
Click the Delete key on your Mac
Do the same for other old wireless networks that you no longer use, then restart your Mac.

How to set up guest wifi network on 1200 series APs with disclaimer web portal?

I've been thinking about this one for awhile. I want to set up a guest wifi network without any security (AES / TKIP) that allows guests to connect. Ideally, their web browser would be redirected to a web portal containing legal disclaimers, and they would need to accept the terms and conditions to use the guest wifi. I would also like to have them be required to visit the web portal again every 8 hours after that to accept the terms and conditions again.
I have a Cisco 1240AG access point already. What else do I need to make this work?

I don't believe you can do this just with an AP running in autonomous mode you would need to have a WLC to configure the splash page.
Have a look here:
http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-0/configuration/guide/c70/c70users.html#wp1049273
Alternatively you can use software running on a PC/Server. Something like http://www.antamedia.com/hotspot/
Hope that helps!
Matty

How do I delete a wifi network when I don't have the password?

Yesterday, I had some work done on my home network, which affected all my wireless devices. I was able to get everything up and running, but the Ipad. I have a different type of encryption now and can't connect to my Ipad. My nephew, who did the work, wants me to delete the current wifi and then start over so it will see the current wifi network. The network that is showing is my new network name, but I type in the password and I get an unable to join/dismiss message. I have tried to reset network settings, but I still see the same network. My nephew won't be back until later in the week, I miss the wifi.
Any ideas?
Thanks.
Nan

I'm not sure if this will work for you, but it's worth a shot.
TRY THIS:
Go to Settings > Wi-Fi > select 'Other...' > Enter Network Name and Security Password > select 'Join'
MY SETTINGS:
The router is set to WPA2 Encryption. The iPhone 'Wi-Fi Networks' settings is set to 'Ask to Join Networks'
ISSUE BACKGROUND:
I had a problem where my iDevice (iPhone 4) would not automatically connect to my Wi-Fi router even though the name - linksys - was always present. I didn't want to 'Reset Network Settings' yet as there were some hotspots I didn't want to have to go through the hassle of entering 16 to 32 character passwords again. I was planning to try the 'Forget this Network' option, but it wasn't present. I tried the step above as a long shot and it worked. Hope this helps.

How do I create a wifi Network in a classroom without Internet.

Hi all,
I have an iPad, Iphone and a MacBook Air that I use in my PC-equipped classroom. I can get by without wifi, but several new apps have me wanting to use the iPad (or iPhone for that matter) as a mobile whiteboard. My problem is the adhoc network I can create with my MBA deactivates whenever I sleep the MBA. This happens severa times throughout the day as I'm not the only teacher using the room.
What I would like to do is use a spare Airport Extreme base station I have to create an equivalent to the adhoc netwerk, but on a permanent basis.
Is this possible, and if so how?
Thanks!

The AirPort Extreme....or any other AirPort does not need an Internet connection to create a local wireless network.
Simply configure the Extreme using AirPort Utility to "Create a wireless network" and ignore the messages that you do not have an Ethernet connection and/or Internet connection.
Once the Extreme is configured, you have the option to go back and click to "ignore" the "errors" and the indicator light will change from a blinking amber to green.
We can't provide any more specific configuration instructions without knowing what the model number of the AirPort Extreme might be (it is on the bottom), and which operating system the MacBook Air might be using.

How do I set one wifi network as preferred?

We have 2 wifi modems at home as the signal is bad in some parts of the house with just one. So I have set up another as a relay. However, all of our apple iPads/iphones automatically default to the one modem we use the least. Even if there is no signal bars at all it will default to that modem and never chose the other one which it is set up for unless I manually change it every time I wake up the ipad. I have tried forgetting the network and then putting them back in in different orders. But same problem always occurs. Is there a way to set one network as the preferred first choice network without deleting the other one completely? Many thanks

system prefs>print and fax>print and you'll see a pulldown menu labelled Selected printer in print dialog. It defaults to Last Printer Used, but you can choose a specific printer if you want that for your default.

Internet sharing via dongle, how to set password for wifi network created?

I am using a USB dongle with my Mac book Pro to share internet through AirPort, so that i can access my mac book's wifi from my iphone. This works great, but it is an open network and I woud like to set up a password.
If anyone can point me in the direction I would be very grateful!
Thanks

If you are using OS X's Internet Sharing feature, then you can configure wireless security on your Mac's internal AirPort Card but are limited by the OS X version that you are using. It was not until Mountain Lion that Apple provided WPA2 security. Prior to this only WEP was available.
You configure Internet Sharing via System Preferences > Sharing > Internet Sharing. (I don't have 10.6.x on any of my Macs so this may be different for your case.) Once you configure what is shared, you can then add wireless encryption.

How do i unforget a wifi network?

Similar Messages

Maybe you are looking for