How do I ungroup things in Elements 9?

How do I ungroup different text and graphic elements in Elements 9?
thanks

Can you please elaborate more around here?

Similar Messages

How do I move a Premier Elements Project to a new computer?

I want to move a Premier Elements Project to a different machine with more efficient RAM and SSDs. How do I move a Premier Elements Project to a new computer?

Welcome to the Premiere Elements Forum.
I constantly migrate my Premiere Projects between my laptop, and my workstation, but I set those Projects up, initially, with that in mind - which is different than having a Project set up on one computer, and then moving it to another. For my setup (remember, this is initially, when I start a Project), see these two articles:
Setting Up Project Folders & Sub-folders
Using External HDD's for Video Editing
For existing Projects, there are a couple of ways to address this. The method that you use, might depend on how you plan on moving the Project.
If you have an external HDD, and plan to use that to do the move, see the "Using External HDD's" article above, as it talks about drive letters in the OS. Getting that correct first, can save a lot of work later.
Then, one can use the Project Archiver to Copy the Project, and necessary files to that external. When one has done that, I strongly suggest that they test that "archived Project," to make sure that the Archiver has gathered everything necessary. The success of that process can depend on how one has set up their folders and sub-folders, and where their Assets (the material that has been Imported into the Project) is located. That is why I always urge one to test everything first. Then, just plug that external HDD into the new computer. At that point, they will have two options: edit to/from the external, or Copy everything to the new computer. For the former, see that "Using External HDD's" article, as there can be some limitations, such as both HDD speed and connection speed, that can impact how well things work.
Next, one could just Copy (over a a wired, or wireless network, or via an external HDD), the Project file (PREL), all Assets, and most of the Scratch Disk folders, to the new computer.
Note: there are files in the Media Cache, such as CFA's and PEK's for the Conformed Audio, that do not have to be Copied/Moved, as PrE will rebuild those (give the program time to do so, and do not edit the Project, until they ARE rebuilt). Same for the Render Files, as if those are needed, one can easily hit Enter/Return, to Render the Timeline, or part of it, again.
Keep the folder structures.
If one gets the "Where is file _____ ?" message, this ARTICLE will be helpful.
Note that the PREL (Project) file is really an XML database. It contains NO MEDIA, but only absolute links to where that media was Imported from. See this ARTICLE for more background.
Good luck, and if you have any questions, or something above was not clear, please ask, before you make the move, as the answers might save you some time, and extra work.
Hunt

How do you connect your photoshop elements on your computer to your account online? and how do you create a customized url? how does the gallery work and how do you access it? i have trouble signing in on my program from my computer to connect to the onli

how do you connect your photoshop elements on your computer to your account online? and how do you create a customized url? how does the gallery work and how do you access it? i have trouble signing in on my program from my computer to connect to the online photoshop, and I really want to create my own customized url and post photos to my gallery and share them with the world, family, and friends, but i need help because i can't figure how to do any of this, would really appreciate feedback and assistance, thanks, - claire conlon

To add to sig's reply, "calibrating" does not calibrate Lithiu-Ion batteries, it calibrates the charge reporting circuitry. If you look at the effect of deep discharging Lithium-Ion batteries in the data from the independent test group, Battery University, you will see that doing so shortens the life of the battery significantly. It looks like an optimum balance between use and life is at a discharge level of 50%.

How can I remove things from the home screen

How can I remove things from the iPad home screen?

Hold down an icon until all icons start to wiggle.
You then have two choices:
1. Drag the icon to the right so it goes to a different (non-home) screen.
2. If the icon is not supplied by Apple as part of iOS, you will see a small "X" in the upper left corner. You can click that to delete the icon.
Stop the wiggling by pressing the home button.

How many computers can I use Elements 12 on?

I purchased Photoshop Elements 12 in the box. I have Elements 8 on my computers. Should I uninstall Elements 8 or will the Elements 12 install take care of it? Also, how many computers can I install Elements 12 on?

Ho Ktown,
You can use Elements 12 along with Elements 8 and they can coexist. As per the EULA you can install the Software on 2 Machine but can use on 1 Machine at a time.
Regards,
Abhijit

How do I find things in the cloud?

How do I find things in the icloud?

Just what do you mean?
What are yo looking for?
Yu can redownload iTunes purchases from iCloud
You backup to iCloud
Some apps can use iCloud storage. It depends upon the app.

How to get the number of elements in DB

Could you tell me how to get the number of elements in DB??
My code to get the number is below, but I think it is not efficient
DB->cursor(DB, NULL, &cursorp, 0);
while ((ret = cursorp->c_get(cursorp, &key, &data, DB_NEXT)) == 0)
count++;
--------------------------------------------------------------------------------------------------------------

Hi,
The most efficient way to get a count from the database is using the DB->stat API (http://docs.oracle.com/cd/E17076_02/html/api_reference/C/dbstat.html)
The code will be something like:
        DB *dbp;
        DB_BTREE_STAT *statp;
        int ret;
        /* Print out the number of records in the database. */
        if ((ret = dbp->stat(dbp, NULL, &statp, 0)) != 0) {
                dbp->err(dbp, ret, "DB->stat");
                goto err1;
        printf("%s: database contains %lu records\n",
            progname, (u_long)statp->bt_ndata);
        free(statp);The code comes from the example included in the distribution at examples/c/ex_btrec.c
If the database isn't a btree, you should update to the appropriate statistics structure and field.
It's worth noting that retrieving the count is never a "cheap" operation. The count is not stored in the database - since doing so introduced a single point of contention that creates a bottle neck.
Regards,
Alex Gorrod
Oracle Berkeley DB

How to add a new data element for existing table filed(Primary key field)

Hi Experts,
How to add a new data element for existing table field(Primary key field)
For this filed ther is no foreign key relation ships and even check table.
while activating table it is giving message like below.
can you help any one to solve this and wil steps to add new dataelement for existing primary key filed of a table.
Check table (NAMING SPACE/TABLE NAME(EX:/TC/VENDOR)) (username/19.02.10/03:29)
Primary key change not permitted for value table /TC/VENDOR
Check on table /TC/VENDOR resulted in errors
Thanks
Ravi

Hi,
Easiest way is to download the table eg into an Excel table (if possible) or text table. Drop the table from the database. Build your table with the new key field. Build the database table again and fill it.
You can do it also over the database into a new table. Drop the old one. Build the enhanced one and fill it. Afterwards drop your (temporary) table.
Maybe there are other ways, but this works.
Success,
Rob

How can I access the sub elements of the Nested Cluster-2

would like to know the label a sub element of a Nested Cluster. I have included the vi. I am trying to programmetically read the Text label of the data elements in Value N mode cluster (Max , Min Mode). I was looking into the Type descriptor document. It can tell me how many and what type of elements are in the cluster. But it does not gove me Refnum to those objects.
Let me know if you have an solution to my question."
Attachments:
cluster_1.vi ‏24 KB

Hi
You need to do a recursion. If the reference you get from the array "controls[]" if of type cluster, then you have to loop through recursively.
Openg toolkit has variant tools that might be of some help to you (www.openg.org).
Good luck
PJM
Got EasyXML?
JKI.VIPM.EasyXML.OpenG.LAVA.Builder.blog

How can I access the sub elements of the Nested Cluster

I would like to know the label a sub element of a Nested Cluster. I have included the vi. I am trying to programmetically read the Text label of the data elements in Value N mode cluster (Max , Min Mode). I was looking into the Type descriptor document. It can tell me how many and what type of elements are in the cluster. But it does not gove me Refnum to those objects.
Let me know if you have an solution to my question.
Attachments:
cluster_1.vi ‏24 KB

I suggest posting this question on the LabVIEW forum. This is the Measurement Studio for Visual Basic forum and there are not nearly as many LabVIEW experts that monitor this forum as the LabVIEW forum.
- Elton

How can I access the selected element of a DropDownByIndex-box?

Hi,
I want to create a WebDynpro with two web services. I created the first request with the first web service and the results are displayed in a DropDownByIndex-Box. Now the user should choose one of the results and I would like to use this for the request with my second web service. How can I access the selected Element of a DropDownByIndexBox in the Code?
Thank you!!
Julia

Hi Julia,
when user select one element in drop down it automatically set lead selection of node binded to dropdown.
For example if you bind a dropdown to node myNode with value attribute myAttribute the lead selection of node myNode is set in the position of element choose from user.
So to take this chooised element use this code:
wdContext.currentMyNodeElement.getmyAttribute()
bye
Andrea

How do I recover my photoshop elements after hard drive replacement?

I recently had to replace my main drive on the computer, so I have to reload all my software. I originally installed photoshop elements 3.0 and still have the CDs and serial number, but cannot install it because it isn't compatable with windows 7. I had upgraded to 5.0 and have that CD, but it is upgrade only and will not install because it cannot detect an earlier installation. I do have all the files copied from my previous drive into a directory in the new drive, but the installation of 5.0 didn't find what it needed, even when I gave it the correct directory.
How do I get my photoshop elements back on my computer?
Thanks!

You should not need to reinstall Elements 3 at all. Upgrade disks contain the full version of the software. The serial numbers tells the installer if you have a full version or an upgrade.
Just install Elements 5 from the upgrade disk, enter your Elements 5 upgrade serial number then enter your Elements 3 serial number when prompted.

I am planning a long vacation and taking my laptop but it is my home computer that my new ipad and ipod touch are synced too. I know i can backup to the cloud over wifi but how can i do things like delete photo albums

I am planning a long vacation and taking my laptop but it is my home computer that my new ipad and ipod touch are synced too. I know i can backup to the cloud over wifi but how can i do things like delete photo albums instead of having to manually delete pictures one by one on the Ipad. Is there any way also to add my pictures to the ipad other than through email. i am assuming that i can't just install itunes on the laptop and sync to that. I have been told that i always have to sync to my original synced home computer for that.

The links below have instructions for deleting photos.
iOS and iPod: Syncing photos using iTunes
http://support.apple.com/kb/HT4236
iPad Tip: How to Delete Photos from Your iPad in the Photos App
http://ipadacademy.com/2011/08/ipad-tip-how-to-delete-photos-from-your-ipad-in-t he-photos-app
Another Way to Quickly Delete Photos from Your iPad (Mac Only)
http://ipadacademy.com/2011/09/another-way-to-quickly-delete-photos-from-your-ip ad-mac-only
How to Delete Photos from iPad
http://www.wondershare.com/apple-idevice/how-to-delete-photos-from-ipad.html
How to: Batch Delete Photos on the iPad
http://www.lifeisaprayer.com/blog/2010/how-batch-delete-photos-ipad
(With iOS 5.1, use 2 fingers)
How to Delete Photos from iCloud’s Photo Stream
http://www.cultofmac.com/124235/how-to-delete-photos-from-iclouds-photo-stream/
 Cheers, Tom

How can I move my Premiere elements 8 from my old pc to my new imac?

How can I move my Premiere elements 8 from my old pc to my new imac?

tenfootprints
Does your imac come with a Windows Mac interface?
If not, you cannot. There is no Premiere Elements 8 Mac version. And, you cannot install Premiere Elements 8 Windows on
a Mac computer. As I recall, Premiere Elements 9.0/9.0.1 was the first Premiere Elements version to be offered in Windows and Mac versions.
Please explain with more details.
Thanks.
ATR

I have installed a lacie porsche design 1tb external hard drive but how do I move things onto it so my mac speeds up

Hi Can anyone help? My Imac (about late 2008) was running very slow and I realised I had very little memory left on it so I was advised by the online chat buddy at Apple to buy an external hard drive. I have bought a lacie porsche design 1tb external hard drive which is great but how do I transfer things on to it so my computer works faster. I woudl imagine the buggest files I have are both photos and music (all bought form itunes).
Any help would be very much appreciated?
Thanks

How much free drive space is there? Right click on the Macintosh HD folder (or however you may have renamed it) and select Get Info.
The OS needs around 10 GB for its operation, but not all of that room is necessarily always needed. Depending on how close you get to the edge, creating more free space won't necessarily do anything to speed things up. It can certainy happen, but it's mostly a myth that low drive free space is a cause of slowdowns. This applies especially to zombie suggestions you may often see here to clear a certain minimum percentage of the drive out.
My recommendation would be to keep 10 GB free, plus room for anticipated expansion of your own files. So a ballpark might be at around 20-25 GB, but your mileage may vary, depending on how you use the computer.
If you have at least 10 GB free, then I'd say low drive space isn't causing your performance issue. Of course, moving things out isn't necessarily a bad idea either, if it's really needed--but you do realize that whatever you move out to an external drive will need to be backed up as well.
First backup everything, as this may be a symptom of a failing hard drive. This won't exhaust all the possibilities for the causes of the slow downs, but here are some things to start with: Open Disk Utility and select the drive, not the startup volume. What does it say for SMART Status, verified or not? You can better check to health of the drive with the demo of SMART Utility.
Next, open Activity Monitor. It's in the Applications folder inside the Utilities sub-folder of the main Hard Drive folder ("Macintosh HD", unless you have renamed it.) Go to the System Memory tab and take a screenshot of the bottom section only. (Screenshot is Cmd-Shift-4.) To insert it into your post use the camera icon above. Being low on RAM/memory can cause these kinds of symptoms. Like this:
In addition, see if there's any process or application consuming an inordinate amount of CPU. How much CPU is idle?

How do I ungroup things in Elements 9?

Similar Messages

Maybe you are looking for