How do I uninstall Elements 11? I get Error 1316 and file it is looking for doesn't exist.

Nothing happens when I click on the Organizer button on the bottom of the screen in a new installation except it says Loading the Elements Organizer Workspace and then the message goes away. So I was going to uninstall and reinstall and got the error 1316 message "Network error occurred while attempting to read from the file C:\windows\installer\adobe photoshop elements 11.msi. This file does not exist. I have no network. Can' find an answer that deals specifically with version 11. Tried the Microsoft Fixit and that aborted with code 80072F8F. Any solutions?

You can try running the CS Cleaner tool from CS Cleaner Tool for installation problems | CCM, CS6, CS5.5, CS5, CS4, CS3 - http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html.
Were you previously trying to utilize the FixIt tool at http://support.microsoft.com/mats/program_install_and_uninstall/?

Similar Messages

I am having a hard time with a page that is working for everyone else. When I click on anything in the site I get a message that says "The page you were looking for doesn't exist." This is happening on both my ipad 2 and my iphone 5. I cleared my cache

When I click on anything in the site I get the message " The page you were looking for doesn't exist." This website works for everyone else, but not on my iPad 2 or iPhone 5. I cleared my cache and history on the iPad, but it still isn't working.

I live in Germany and my credit card is in my native country of Holland .. then it
doesn't accept my credit card.
Your first statement explains the second statement. To use the German iTunes Store, you need to prove that you're a resident of Germany (that is required by the content owners who will not allow cross-border sales) and the only way Apple can provide such a verification is by requiring that you enter in either a German credit card or a German-purchased iTunes prepaid card. Since I presume the former is not a possibility, you'll need to do the latter if you wish to purchase content from the iTunes Store. Again, this is not Apple's choice but is forced on them by the content owners as a requirement for Apple being allowed to sell the content. The EU is working on regulations that would force the content owners to allow access pan-EU, but that's still in the works.
You do not need an iTunes Store account to activate and run your iPad, though; at least, I didn't need one for either of my two iPads. If you only want to set up an account so you can get free iPad apps, take a look here:
http://support.apple.com/kb/HT2534
Read the steps carefully as the order in which you follow them is apparently critical. This seems to come and go, or only apply to App Stores in specific countries, so you may not see the option for "None" when asked for a payment type.
As to the German iTunes Store in English, you can comment to Apple on that via their feedback pages:
http://www.apple.com/feedback
Regards.
P.S. Regarding "this is the only place for a complaint and that will no doubt get removed because
I'm not full of happy joy sparkles.
As stated in the terms of use to which we all agreed, this isn't a complaint forum, it's a technical support forum. You don't have to be full of "happy joy sparkles", but posts that are nothing but complaints may indeed be removed. If you want to complain to Apple, use the feedback pages.
Message was edited by: Dave Sawyer

When I try to instal latest version of iTunes onto my computer I get error messages, and then the only way for me to access iTunes is to do a System Restore to and earlier restore point

When I try to install the latest version of iTunes, during the installation I get error messages saying that a program is trying to change registry and the installation is stopped.
After this happens the only way that I can open iTunes is to do a 'system restore' to an earlier time.
Has anyone else experienced this and can you help?

Could you please post the exact text of the error message or provide a screenshot?
There is advice on issues with the update at Troubleshooting issues with iTunes for Windows updates. One of the entries in the further information section refers to a possible registry permissions problem which might be what you are seeing.
tt2

How do i uninstall Itunes as its not my account and it hasnt be used for so long

basically my mums itunes is on my laptop it hasnt been used for a while i want to put my itunes on it however i wanted to uninstall hers and reinstall with my phone.
however i tryied uninstalling it it then comes up with message do you want allow itunes to update so i say no as i want to remove it, it then wont uninstall.
so i choose the option to update the second time around it still doesnt work.
so then i try to download the latest software so the current itunes is upto date it then gets to the end and says it cant install.
how the **** do i get rid of the itues???

As far as functionality goes, I don't see anything wrong. when it comes to efficiency you need to keep some general pointers in mind. These issues which I'm bringing up will not affect your code currently since your array sizes are small but can start creating memory fragmentaion and slow down the software if your array sizes are much larger and the software runs for a long period of time.
1. Try not to use Build Array. Each time you use a built array labview creates a copy in the memory. Try to initilized your arrays and replace the subsets.
2. as much as you can try not index arrays or unbundle cluster multiple times. try to perform as many tasks as possbile in one shot. (this was evident in your second loop)
Besides that it's looking good.
I made a few modifications to your code and attached it. I wanted to give you a different take on it as it relates to being able to control the inputs and outputs programitically, if you had a look up table. I didn't make the same modifications to your second loop but I can guide you through what needs to be done if you would like to move in this direction. Again your original code is well done for someone who is new to labview so don't feel like you need to follow the new VI design. Just try to remove the build array and multiple indexing as a good programming habbit.
www.movimed.com - Custom Imaging Solutions
Attachments:
Channel Testing.vi ‏41 KB

How can I save to web without getting error messages and having my computer tell me there is no memory or freezing up and shutting down? I've read many other suggestions but have tried those things and none have worked. I have photoshop 12.

Photoshop: Selecting Save for Web gives error: "Could not complete this operation. An unknown operating system error has occurred."
I have tried all of the solutions I've found, but none work for me or my two systems (windows 7 and windows 8.1)
Many times I get the message only when saving a web file that there is not enough memory: My windows 8 has 2 TB and 10 Gigs of ram. I took it into the shop to see if something was wrong with the hard drive or ram, but when I hooked up my windows 7, I'm having the exact same issues. Please help.
I tried this:
I set ram to 100%, I changed my preferences in editor to not run anything to do with auto analyzer, I renamed the file auto analyzer to put a space in as someone said to do... I even did the following...
Reset Photoshop's Save For Web preferences:
1. Quit Photoshop
2. Delete the "Adobe Save For Web 12.0 Prefs" file:
Mac: Users/[Username]/Library/Preferences/Adobe Save For Web 12.0 Prefs
Windows XP: Documents and Settings/[Username]/Application Data/Adobe/Save For Web/12.0/Adobe Save For Web 12.0 Prefs
Windows 7 and Vista: Users/[Username]/AppData/Roaming/Adobe/Save For Web/12.0/Adobe Save For Web 12.0 Prefs
Whenever I "save for web" and save something to the root of C:/ it will work, but the next time I "save for web" it produces the error. I was able to fix it by going into User Account Control settings and scaling down to "never notify." It requires a reboot, but the next time I "saved for web" it worked fine.
If you do this, be sure to change the UAC back to "default" as it is a security measure.
FYI you will have to restart anytime you tweak UAC.
To change UAC in Win 7 go to control panel>Action Center>Change User Account Control Settings and drag the slider to "never notify."

Try this: press F10 or tap the Alt key to display the menu bar temporarily, then
View > Toolbars > Menu Bar
If that doesn't work, you could reset your toolbars to factory default using Firefox's Safe Mode. First, make a backup of your computer for safekeeping. To back up Firefox, see [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information].
Next, start Firefox in Firefox
[http://support.mozilla.com/kb/Safe+Mode Safe Mode], and check only the box to reset toolbars. Be careful not to "reset" anything else if you didn't back up.
Hope this helps.

How do I uninstall Elements and Premiere 10 in Windows 8?(64bit)

These are the steps I took to try to uninstall these programs.
1st when to "Program and Features" it does not show either program, there only the newer version that I just install which was elements and premiere 13
2nd I try using the cd which it gave me one option which is to uninstall try that but getting errors each time such as error 2343 Specified path is empty.
3rd Try googling my concerns, couldn't find the answers that I require to uninstall.
4rd this community in hopes you may have any suggestions.
Thank-you

use the cleaner, Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

When I try to sign into photoshop elements I keep getting error code 400 connection error. I am connected to wifi and have no connection problems anywhere else. How do I fix this?

When I try to sign into photoshop elements I keep getting error code 400 connection error. I am connected to wifi and have no connection problems anywhere else. How do I fix this?

FRANK M
What computer operating system is your Premiere Elements 9 running on? I will assume Windows 7, 8, or 8.1 64 bit for now.
As for the Help Menu/Update way for updating, are you doing that with antivirus and firewall(s) disabled? If not, please do so.
Do you have the 9.0.1 Update of the program installed? What version of Camera Raw do you have installed?
Premiere Elements 9 is an older program where you can still do manual installs for that one and only Update. And, Camera Raw for 9 is no longer being updated.
For the 9.0.1 Update
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4929
Camera Raw (last update possible for 9) is 6.5
Camera Raw-compatible Adobe applications
Adobe - Adobe Camera Raw and DNG Converter : For Windows : Camera Raw 6.5 update
Please review and consider the above, and then let us know the outcome.
Thank you.
ATR

Cannot install update 9.0.3 in my Photoshop Elements 9. Getting error msg "Patch cannot be applied".

Cannot install update 9.0.3 in my Photoshop Elements 9. Getting error msg "Patch cannot be applied". How can I correct?

Nobody can know. You are not offering system info or otehr details. Start by uninstalling and reinstalling the base program.
Mylenium

I have photoshop elements 13 and want to remove photoshop elements 10 first. When I try to remove 10 I get error 1316 , specified account already exests and will not remove. I have windows 7

I have photoshop elements 13 and want to remove photoshop elements 10 first. When I try to remove 10 I get error 1316 , specified account already exests and will not remove. I have windows 7

Exit Code: 6, Exit Code: 7 Installation Errors - http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html
Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for information on how to review your installation logs

I cannot install or uninstall itunes. I get error message 2324?????

I cannot install or uninstall itunes. I get error message 2324?????

You might need to run the Windows installer cleanup utility....start the troubleshooter for assistance at the following link: http://support.microsoft.com/kb/2438651/

How do I use Migration Assistant to get my Mail and Keychain settings from

How do I use Migration Assistant to get my Mail and Keychain settings from my Power Mac G5 2.3Ghz? I just purchased a new 2.5 MacBook Pro which will be delivered tomorrow, and I want to to know how to transfer Mail and Keychain?
Thank You in advance for your reading and replying.
Kindest Regards,
Sebastian

Rather than using Migration Assistant, which can cause trouble with the PPC to Intel change, simply boot the G5 in FireWire target disk mode and manually transfer the following:
/Home/Library/Keychains (copy the whole folder)
/Home/Library/Mail (copy the whole folder)
/Home/Library/Preferences/com.apple.mail.plist
You might want to look over Kappy's helpful guide for migrating, which covers the full process for a manual migration (including the above files).
Hope this helps...

I bought and paid for two audiobooks in iTunes store. However they don't download. I get error -48 and/or 1000. How do I resolve this? Thank you.

I bought and paid for 2 audiobooks in iTunes store. However they don't download. I get error -48 and/or 1000. How do I resolve this? Thank you.

I reinstalled iTunes on my PC. Also tried downloading via iTunes on iPad and iPhone. The latter is not possible because it tells me that I already bought the products. The purchases have already been charged to my account!

I have Adobe Photoshop Elements 5.0 and am trying to upgrade to 13 - getting error message that "file archive part" of Adobe 13 is missing. When I try to download installers for older products it only goes back to v7, not v5 what to do next?

I have Adobe Photoshop Elements 5.0 and am trying to upgrade to 13 - getting error message that "file archive part" of Adobe 13 is missing. When I try to download installers for older products it only goes back to v7, not v5 what to do next?

TDFields you will want to ensure the 7z and exe file are in the same folder/directory. You can find more details at Find a download link on Adobe.com.

I cant open itunes. Get error 7 and windows error 5. How do I resolve?

I updated to latest version and cannot now open iTunes. I get Error 7 and Windows error 5. does anyone know what the issue is and how to resolve it? I have Windows 7 and the .Net Framework 4 or above and my pc will therefore not install it.

alexcookson,
The steps detailed in the article linked below can resolve this error (alternatively "Error 7") and help get iTunes to work on your computer.
iTunes for Windows: "Error 7" message when opening iTunes
http://support.apple.com/en-us/HT203328
All my best,
Allen

How do I uninstall or reinstall itunes when the itunes.mls file is missing and won't do either without it?

How do I uninstall or reinstall itunes when the itunes.mls file is missing and won't do either without it? Have done a search for the file extension on PC and two external hard drives. Doesn't show up.

Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

How do I uninstall Elements 11? I get Error 1316 and file it is looking for doesn't exist.

Similar Messages

Maybe you are looking for