How do I uninstall Microsoft Remote Desktop Ver. 2.0.1?

Working on Macbook Pro running Mac OS X Vers 10.6.7, Intel 2.4G Core i5
8GB D3 DRAM

I had the same problem. In my case it was connected with
bug #4343952 - I was gettin GPF at the end of 1.3.1_04 install which I believe was corrupting the unisnt.isu. Anyway, what I did was:
my HKLM\software\microsoft\windowsNT\currentversion\winlogon\Shell was reg_sz_expand "Explorer.exe". I changed it to reg_sz "Explorer.exe" and then removed *.* from my JRE\1.3.1_04 folder, and then reinstalled freshly from 1.3.1_04 install. This fixed the uninstall and I was able to remove it flawlessly. That worked for me.
Hope this helps and wish you luck.
George

Similar Messages

How can I install Microsoft Remote Desktop ActiveX Control

I am trying to connect to my pc at work from home. This is the message I get.
This portion of the Remote Web Workplace requires the Microsoft Remote Desktop ActiveX Control. Your browser's security settings may be preventing you from downloading ActiveX controls. Adjust these settings, and try to connect again.
I have looked through all the add-ons available and can't find it to add on. Nor can I find a relevant security setting to change.
I am running firefox 28.0 on Windows 7 Professional.

ActiveX controls are specific to Internet Explorer.
* https://en.wikipedia.org/wiki/ActiveX
You can try opening Internet Explorer inside a Firefox tab with the following add-on.
* https://addons.mozilla.org/firefox/addon/ie-tab-2-ff-36/

How to uninstall ? Remote Desktop Licensing (RDS CALs)

Hi, Support
we need to help about how to uninstall Remote Desktop Licensing (RDS CALs) without re-install OS
we using windows server 2012 R2, we tried to removed role of Remote Desktop services and re-installed role again but the old RDS licensing still running and keep warning license will expire
tried to Deactivate Server and re-install license but got the error as the picture attached
Thank you for your try to help.
Puibds.

Hi,
I cannot see the screenshot, would you please upload it again? Also, more details about the error is appreciated.
Use SkyDrive to post screen shot/picture.
http://social.technet.microsoft.com/Forums/en-US/w7itproui/thread/4fc10639-02db-4665-993a-08d865088d65
Regarding the issue, the Microsoft Remote Desktop Licensing website might help you.
https://activate.microsoft.com/
Move Remote Desktop Licensing to a New Server
http://technet.microsoft.com/en-us/library/cc730776.aspx
Thanks.
Jeremy Wu
TechNet Community Support

How to Completely Remove/Uninstall Apple Remote Desktop?

This is for my home office system.
I do not want Remote Desktop installed on my home system. There is no reason for it there. Nobody needs to access my machine remotely and I do not even like the idea that there is an application on my machine that would enable anyone remote access to my machine.
When I first got this machine, I deleted what I thought were all the files associated with Remote Desktop. I have no files anywhere on my machine named "Remote Desktop" or "RemoteDesktop" or "ARD", yet I'm CONSTANTLY getting the Software Update alert, telling me I need to install "Remote Desktop Client Update 3.3.2".
For months now I've been ignoring it, and just un-checking the install box every time I need to do updates of other apps. But it is now driving me up the wall.
How in the heck do I make this F-ing thing go away?

yet I'm CONSTANTLY getting the Software Update alert, telling me I need to install "Remote Desktop Client Update 3.3.2".
That update message has nothing to do with uninstalling Apple Remote Desktop, which you have either uninstalled already or never had. All versions of Mac OS X since 10.4 have had the ARD client as part of the installation, and there's no way to remove it (not without hacking your system, anyway).
What is the problem with you just accepting the update? It's not going to hurt anything; unless you turn on Screen Sharing or Remote Management, no one can gain access to your computer. But if you want to not see that update presented, select it when it appears in Software Update and choose "Ignore Update" from the Update menu. Just unchecking it will only keep it from installing; it will not keep it from being presented again the next time you run Software Update.

Microsoft Remote Desktop app ios7 to Windows 8.1 Pro

For anyone using an iPad to remote desktop to your Windows 8.1 pro 64 bit computer, I recently posted the following distress call in the Microsoft Community Windows - Windows 8.1 - Other Windows apps by Microsoft - Other.
A Microsoft Support Engineer there suggested I post it here instead. The 1st part is the distress part, the 2nd part is how I finally solved it and then a different problem started ...
Part 1
Help, I'm going crazy trying to get this Microsoft Remote Desktop app on ios7 to connect to my computer running Windows 8.1.
I've added my computer name, user name and password, but even though it starts to connect it never does and gives me an error message saying:
Timeout while resolving hostname
I've set up my computer to allow remote connections and allow connections only from computers running blah, blah, blah.
What am I doing wrong?
In the past I was able to use logmein free without any problems until they stopped the free version. I can also get through using Team Viewer, so why won't the RD Client app work?
Part 2
Doesn't matter now as I ended up working out that it didn't work with my computer name. What I had to do is go to cmd and type ipconfig to find
the right ip address and insert it where it asked for computer name and it worked! Of course, then it kept disconnecting, so I've totally abandoned it and will use Team Viewer instead (until I'm willing to try again).
So that's where I'm up to.
I didn't find anything useful in this TechNet article: http://technet.microsoft.com/en-us/library/dn473013.aspx
So any suggestions on how to make Microsoft's RD Client app on ios work without disconnecting all the time?

Hi,
For this issue,as Milos said,using the host name requires your network to resolve the host name properly through DNS.
So this issue is related to DNS.In many home network configurations only the IP address will work properly.
Regarding DNS,I suggest you check the configuration on the ipad.
Regarding how to add host name to IOS,I suggest you contact apple support for help.
Regards,
Kelvin Xu
TechNet Community Support

Cut/Paste not working in Microsoft Remote Desktop for Mac

Sirs,
I am using Microsoft Remote Desktop V8.05 build 24428 on a Mac under the latest Mavericks OS, and I find that Cut and Paste are not working. When I paste on Remote Desktop Windows always pastes the last thing cut/copied under the Windows remote session,
rather than whatever I just cut/copied in another Mac window.
I am well aware that the keystrokes are different, and I tried to follow the instructions on another question which indicated that I should select the console session checkbox on Remote Desktop's 'Connection' configuration window. However Remote
Desktop no longer seems to have that option ... the topmost line now shows 'Admin Console' and checking it did not help with cut/paste.
I hope you can tell me how to get this working as cut/paste is a great convenience.
Thanks

Hi,
Clipboard redirection is not supported in current versions of Microsoft Remote Desktop. However, I will help to submit this as customer wish to the product team.
Thanks for your understanding.
Jeremy Wu
TechNet Community Support

Microsoft Remote Desktop - Works on 10.4 but not on 10.5

I know that this is an OS 10.5 forum but the Mactopia website is useless and the forum there is non-responsive. Just wondering if anyone has any thoughts on why I'm able to connect to my office XP machine using 10.4 on an old powerbook over a wireless network but not able to connect using 10.5 on a newer iMac on the same network.
Thoughts are appreciated.

I've used Microsoft Remote Desktop Connection Mac OS X Client
<http://www.microsoft.com/mac/products/remote-desktop/default.mspx>
And I've used CoRD (Microsoft RDC Screen Sharing)
<http://www.versiontracker.com/dyn/moreinfo/macosx/30808>
successfully on 10.4, 10.5, and 10.6.
Are they the same version? And is that the latest version from Microsoft?
I assume all other networking stuff is working OK.
Have you tried the XP system's IP address, just in case it is a naming issue?
Does RDC connect at all?
Do you get the chance to login?
How far do you get and what kind of error/failure do you see?

Sun VDI 3.1-EA: "Microsoft Remote Desktop" Provider -- Bug?

It seems there is a bug in VDI 3.1:
After having added a VirtualBox desktop provider I also wanted to add a Windows 2003 terminal server as desktop provider, so I go ...
- https://localhost:1801
- Desktop Providers
- Windows Remote Desktop
- New ...
- Step 1 ... Next
- Specify New Host
... And now it asks me for this information:
Host:
SSL Port: 443
User Name:
Password:
SSL Port? For a Windows 2003 server?
I am confused ... So I want to check the "Help" tab. The "Help" tab links to this URL:
https://localhost:1801/vda/faces/jsp/providers/tswizard/NewTSProviderWizard.jsp#
So guessing from that URL ( ... "NewTSProviderWizard" ...) I'd expect to find information regarding Windows TS servers?
But the help text reads ".... Enter the hostname or IP address, and administrator credentials for the *+VirtualBox+* host server ... "
VirtualBox? I wanted to get help with Windows 2003 TS.
So I'd assume that this is a bug?
- the "Add Microsoft Remote Desktop" wizard will get you the one for VirtualBox
- Help text is talking about VirtualBox too
I assume that this will be fixed before the final release?
Regards,
DJ.

What specifically does your customer object to ?The server being +"touched"+. That's already enough for them. I'm ashamed to admit this ... but I too was a Windows admin once. I was young, stupid and I needed the money. ;-)
So having been a Windows admin once myself ages ago in my dark past I can fully understand them. One stupid patch, one stupid incompatible product, one silly addon someone somewhere wrote ... and that server dies in a nice ugly "Bluescreen of Death". Or so they think. Because a typical Windows admin spends 90% of their daily job running from one dying Windows server to another dying Windows server the last thing they want is yet another server that is bound to die because one of us unworthy Penguin worshippers dared to install something on it ....
So NOT having to install anything on that server like with SSGD is perceived as being OK.
Having to install ANYTHING on that server for which the admin doesn't understand the reasons within 1 second simply is a NO GO for them.
+"Why doy ou want to install this BS? My RDP connections work tip top without that thing you want to install ... take your hands off my server ... "+
So ... How do I explain to a very very stressed and hyper-nervous Windows server administrator that I need to install some SSL stuff on his precious Windows 2003 or Windows 2008 installation when SSGD (also from Sun last time I checked ...) didn't need that? And none of his other RDP applications need that?
How do you explain something like that? YOU CAN'T. The discussion is over even before it can begin. And if their Windows administrators are screaming like mad and panicking that you are about to hose their precious Windows systems then soon enough even their managers (who up to that second were on your side) demand an explanation ... "Why does VDI require that when SSGD didn't require that??"
In the end it's easier for me to configure an Windows RDP application via SSGD and deliver it that way to the VDI sessions than argue with the customer and their nervous admins about why in the world I now have to touch their servers with this stuff ...
See what I mean? Yes, I know: I exagerated slightly. Just to give you a feeling of the troubles us people in the frontlines are facing.
SERIOUSLY:* The RDP-Provider in VDI 3.1 is in need of being re-evaluated and re-designed. Like it or not: But it simply is not going to fly the way it is now. Most Windows admins simply don't want any additional stuff installed on their servers. PERIOD. Because only the Gods know what other things such stuff will break one day ...
So the RDP provider in VDI 3.1 should look and feel and act exactly like the one in SSGD. If you want to offer RDP-over-SSL: fine, offer it as an option for the lucky few who don't have to argue with their customer about that.
RIght now it's easier for me to create a Linux VM that auto-boots into a pre-configured "rdesktop" session and then deliver that as a login option to users than to argue with the Windows admins why their precious servers need to be touched ... So yes, I'd say this part of the Sun VDI 3.1 product is in need of a re-design.

OS X Microsoft Remote Desktop - Remapping shortcut CMD+W doesn't work as intended

Seeing the follwing issue in Microsoft Remote Desktop on OS X:
Changing shortcut for Close (window) CMD+W for the application in OS X System Preferences -> Keyboard -> Shortcuts doesn't disable the original CMD+W shortcut as is expected. After changing, CMD+W is still closing windows.
This is working as expected for changing Quit Microsoft Remote Desktop from CMD+Q to other shortcut, where CMD+Q is not quitting the application after the change has been made.
This is unfortunate, as my "instinct" to quit applications on remote desktop when working from my Mac is to use CMD+W. This instead closes the remote desktop connection.

Hi Kristoffer,
Since we are not familiar with Mac devices, please refer to Mac forums below to get more proffsional support.
More information for you:
Mac Forums
http://macforums.com/
How to Remap Any Keyboard Shortcut in Mac OS X
http://lifehacker.com/5720087/how-to-remap-any-keyboard-shortcut-in-mac-os-x
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Set up microsoft remote desktop

how do i setup preferences in microsoft remote desktop?

Hi,
If you mean the Windows Remote Desktop connection (mstsc.exe), you can use notepad to customize the .rdp file and distribute the customized .rdp file to your users.
If you mean the Microsoft Remote Desktop app for Mac/IOS/Android, I’m afraid that we have no option to set the preferences.
Thanks.
Jeremy Wu
TechNet Community Support

Sharing a Printer With Microsoft Remote Desktop

How do you set it up?
The printer (Epson Stylus Photo 820) is connected through USB to an Intel iMac.
I control a Windows XP Pro PC from the iMac through firewire with Microsoft Remote Desktop and it works fine (although I can't get it to share the internet connection.) I have turned printer-sharing "On" in the iMac Preferences. I have also checked "Printers" in the "Connect automatically to these local devices when logged on to the remote computer" dialog box of MS RDC.
When I go to Add Printer in Windows, I search for a printer and get a tree view with "Microsoft Windows Network" on top and "WORKGROUP" under it. I try to input the printer name, but it tells me it can't find such a printer.
If I go to the Epson control panel under Windows, and click on ports, it shows the name of the iMac on four separate ports, and if I activate one of them it shows the Stylus 820.
But then it doesn't print.
Any ideas?

same problem here. cannot print a document from the remote desktop computer (microsoft) to my local printer connected to an intel mac .please can anybody help I have a offcejet HP g55

Rdp://full%20address=s: IP or DNS Name is not user friendly... Can rdp:// IP or DNS Name be assumed as the full address in Microsoft Remote Desktop?

We would like to request Microsoft Remote Desktop (MRD) to behave the same as the open source CoRD.app on OS X with respect URL resolution.
Example:MRD will resolve from Terminal rdp://full%20address=s:<IP or DNS Name>, but not rdp://<IP or DNS Name>
As the OS will respect any of the following protocols in Terminal or browser:
afp://<username>@<IP or DNS Name>
cifs://<username>@<IP or DNS Name>
ftp://<username>@<IP or DNS Name>
ftps://<username>@<IP or DNS Name>
http://<username>@<IP or DNS Name>
https://<username>@<IP or DNS Name>
smb://<username>@<IP or DNS Name>
ssh://<username>@<IP or DNS Name>
vnc://<username>@<IP or DNS Name>
(<username> can be omitted to force authentication at connection) it seems slightly redundant to force "full%20address=s:" in the URL.
Can Version 8.0.1.6 be modified address this request?
What is the proper way to report an enhancement request or bug?
Thank you for your consideration.

Hi,
From your description it appears that you want to modify the pattern for assigning the rdp full address but this doesn’t support as per your requirement. That is the default string which we need to have for passing full address.
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Can't connect to windows 7 machine using microsoft remote desktop connection

I am unable to connect from my home network to the Windows 7 Professional machine at my office, using either Microsoft Remote Desktop Connection (2.1.1) for Mac or the open source CoRD program.
When connected to the office network (which is running MS Small Business Server 2011 Standard) both CoRD and MS RDC will connect to my desktop machine just fine! (My MacBook Pro runs Mountain Lion.)
From my home network, MS RDC will complain that it cannot find the Windows computer if I just use the Windows computer name. If I use the Windows machine's iPV4 address, it works on it for a minute and then tosses up this error message:
Using the IP address of the Windows machine, CoRD just grinds away for a minute or so and then times out.
I should add that using Internet Exporer under Parallels from home, I can get a little closer to success (after fidding around with ActiveX controls for a bit). I will get to the Windows login screen, but then I am told that my user password is wrong (which makes no sense at all)!
Okay, geniuses, have at it, and thanks in advance!!

The genius for Microsoft products an be found onthe Microsoft forums for their Mac software:
http://answers.microsoft.com/en-us/mac

How do i install "Apple Remote Desktop 3.3" on Lion(10.7)

How do i install "Apple Remote Desktop 3.3" on Lion(10.7) i have the Unlimited client version....
It tells me that the ARD 3.3 dont work on lion but 3.5 do... How do i upgrade it? Do i need to buy a new verion again to use it on Lion ?

Hi here same thing.. i have Lion 10.7 installed.. every thing worked fine untill last night.. after the latest update.. ARD 3.5 inmediately 'hangs' on startup.
tried to set previous ARD from day before but no help..
then i tried to delete the whole program.. and re install it from my 500 dollar CD.. it won't install under 10.7.
whats next?! what is the solution?!
please help.. i work with it every day!!
thx for the replies...
Radar

Error 500 from Microsoft Remote Desktop for Mac and for iOS but not for Windows

I am running Windows Server Standard 2012 as a basic File server and Remote Access Server. I am able to log into to Server remotely using Windows Remote Desktop Client on Windows 7 and 8 machines without problems
When I try to log in using outside the local network using MRD version 8.0.24308 using OS X 10.9.1 or using iOS 7.0.4, I get the following error:
" The gateway failed to connect with the message: 500 Internal Server Error"
I can also log in remotely WITHIN the local network on a Mac or iOS device, it works without getting an error
Any Ideas?

My IT person has tried all these and I still get a 500 error when I log in from Microsoft Remote Desktop 8.5.
Here is part of the MRD log dump (not clear where to send the log since MRD doesn't provide an address when you dump the log into email):
[2014-Mar-27 19:48:56] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-Mar-27 19:48:56] RDP (0): lo0 af=18  addr= netmask=
[2014-Mar-27 19:48:56] RDP (0): lo0 af=30 (AF_INET6)  addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-Mar-27 19:48:56] RDP (0): lo0 af=2 (AF_INET)  addr=127.0.0.1 netmask=255.0.0.0
[2014-Mar-27 19:48:56] RDP (0): lo0 af=30 (AF_INET6)  addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-Mar-27 19:48:56] RDP (0): gif0 af=18  addr= netmask=
[2014-Mar-27 19:48:56] RDP (0): stf0 af=18  addr= netmask=
[2014-Mar-27 19:48:56] RDP (0): en0 af=18  addr= netmask=
[2014-Mar-27 19:48:56] RDP (0): en1 af=18  addr= netmask=
[2014-Mar-27 19:48:56] RDP (0): en1 af=30 (AF_INET6)  addr=fe80::226:bbff:fe00:c3d7%en1
netmask=ffff:ffff:ffff:ffff::
[2014-Mar-27 19:48:56] RDP (0): en1 af=2 (AF_INET)  addr=192.168.0.89 netmask=255.255.255.0
[2014-Mar-27 19:48:56] RDP (0): fw0 af=18  addr= netmask=
[2014-Mar-27 19:48:56] RDP (0): p2p0 af=18  addr= netmask=
[2014-Mar-27 19:48:56] RDP (0): utun0 af=18  addr= netmask=
[2014-Mar-27 19:48:56] RDP (0): utun0 af=30 (AF_INET6)  addr=fe80::e1eb:119:5ad9:da9%utun0
netmask=ffff:ffff:ffff:ffff::
[2014-Mar-27 19:48:56] RDP (0): utun0 af=30 (AF_INET6)  addr=fdce:4b1d:30c:78f8:e1eb:119:5ad9:da9
netmask=ffff:ffff:ffff:ffff::
[2014-Mar-27 19:48:56] RDP (0): --- END INTERFACE LIST ---
[2014-Mar-27 19:48:56] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-Mar-27 19:48:56] RDP (0): client version: 8.0.24428
[2014-Mar-27 19:48:56] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Mar-27 19:48:56] RDP (0): Resolved '10.1.10.11' to '10.1.10.11' using NameResolveMethod_DNS(1)
[2014-Mar-27 19:49:04] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Mar-27 19:49:04] RDP (0): ------ END ACTIVE CONNECTION ------
[2014-Mar-27 19:49:04] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-Mar-27 19:49:04] RDP (0): lo0 af=18  addr= netmask=
[2014-Mar-27 19:49:04] RDP (0): lo0 af=30 (AF_INET6)  addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-Mar-27 19:49:04] RDP (0): lo0 af=2 (AF_INET)  addr=127.0.0.1 netmask=255.0.0.0
[2014-Mar-27 19:49:04] RDP (0): lo0 af=30 (AF_INET6)  addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-Mar-27 19:49:04] RDP (0): gif0 af=18  addr= netmask=
[2014-Mar-27 19:49:04] RDP (0): stf0 af=18  addr= netmask=
[2014-Mar-27 19:49:04] RDP (0): en0 af=18  addr= netmask=
[2014-Mar-27 19:49:04] RDP (0): en1 af=18  addr= netmask=
[2014-Mar-27 19:49:04] RDP (0): en1 af=30 (AF_INET6)  addr=fe80::226:bbff:fe00:c3d7%en1
netmask=ffff:ffff:ffff:ffff::
[2014-Mar-27 19:49:04] RDP (0): en1 af=2 (AF_INET)  addr=192.168.0.89 netmask=255.255.255.0
[2014-Mar-27 19:49:04] RDP (0): fw0 af=18  addr= netmask=
[2014-Mar-27 19:49:04] RDP (0): p2p0 af=18  addr= netmask=
[2014-Mar-27 19:49:04] RDP (0): utun0 af=18  addr= netmask=
[2014-Mar-27 19:49:04] RDP (0): utun0 af=30 (AF_INET6)  addr=fe80::e1eb:119:5ad9:da9%utun0
netmask=ffff:ffff:ffff:ffff::
[2014-Mar-27 19:49:04] RDP (0): utun0 af=30 (AF_INET6)  addr=fdce:4b1d:30c:78f8:e1eb:119:5ad9:da9
netmask=ffff:ffff:ffff:ffff::
[2014-Mar-27 19:49:04] RDP (0): --- END INTERFACE LIST ---
[2014-Mar-27 19:49:04] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-Mar-27 19:49:04] RDP (0): client version: 8.0.24428
[2014-Mar-27 19:49:05] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Mar-27 19:49:05] RDP (0): Resolved 'javpeds.com' to '70.88.173.126' using NameResolveMethod_DNS(1)
[2014-Mar-27 19:49:05] RDP (0): Resolved 'javpeds.com' to '70.88.173.126' using NameResolveMethod_DNS(1)
[2014-Mar-27 19:49:07] RDP (0): Exception caught: Exception in file '../../librdp/private/httpendpoint.cpp' at line 209
    User Message : The gateway failed to connect with the message:
500 Internal Server Error
[2014-Mar-27 19:49:07] RDP (0): Exception caught: Exception in file '../../librdp/private/httpendpoint.cpp' at line 209
    User Message : The gateway failed to connect with the message:
500 Internal Server Error
[2014-Mar-27 19:49:07] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
[2014-Mar-27 19:49:07] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Mar-27 19:49:07] RDP (0): ------ END ACTIVE CONNECTION ------
[2014-Mar-27 19:49:15] RDP (0): *** Application terminated ***
[2014-Mar-29 12:03:43] RDP (0): Final rdp configuration used: gatewayhostname:s:javpeds.com
screen mode id:i:2
use multimon:i:0
session bpp:i:24
full address:s:10.1.10.11
audiomode:i:2
username:s:javpeds\ptraquair
disable wallpaper:i:0
disable full window drag:i:0
disable menu anims:i:0
disable themes:i:0
alternate shell:s:
shell working directory:s:
authentication level:i:2
connect to console:i:0
gatewayusagemethod:i:1
disable cursor setting:i:0
allow font smoothing:i:1
allow desktop com"font-family:'SF Cartoonist Hand';font-size:18px;line-height:normal;" />bookmarktype:i:3
use redirection server name:i:0
[2014-Mar-29 12:03:43] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-Mar-29 12:03:43] RDP (0): lo0 af=18  addr= netmask=
[2014-Mar-29 12:03:43] RDP (0): lo0 af=30 (AF_INET6)  addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-Mar-29 12:03:43] RDP (0): lo0 af=2 (AF_INET)  addr=127.0.0.1 netmask=255.0.0.0
[2014-Mar-29 12:03:43] RDP (0): lo0 af=30 (AF_INET6)  addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-Mar-29 12:03:43] RDP (0): gif0 af=18  addr= netmask=
[2014-Mar-29 12:03:43] RDP (0): stf0 af=18  addr= netmask=
[2014-Mar-29 12:03:43] RDP (0): en0 af=18  addr= netmask=
[2014-Mar-29 12:03:43] RDP (0): en1 af=18  addr= netmask=
[2014-Mar-29 12:03:43] RDP (0): en1 af=30 (AF_INET6)  addr=fe80::226:bbff:fe00:c3d7%en1
netmask=ffff:ffff:ffff:ffff::
[2014-Mar-29 12:03:43] RDP (0): en1 af=2 (AF_INET)  addr=192.168.1.29 netmask=255.255.255.0
[2014-Mar-29 12:03:43] RDP (0): fw0 af=18  addr= netmask=
[2014-Mar-29 12:03:43] RDP (0): p2p0 af=18  addr= netmask=
[2014-Mar-29 12:03:43] RDP (0): utun0 af=18  addr= netmask=
[2014-Mar-29 12:03:43] RDP (0): utun0 af=30 (AF_INET6)  addr=fe80::c852:1a8d:126a:a88a%utun0
netmask=ffff:ffff:ffff:ffff::
[2014-Mar-29 12:03:43] RDP (0): utun0 af=30 (AF_INET6)  addr=fdce:4b1d:30c:78f8:c852:1a8d:126a:a88a
netmask=ffff:ffff:ffff:ffff::
[2014-Mar-29 12:03:43] RDP (0): --- END INTERFACE LIST ---
[2014-Mar-29 12:03:43] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-Mar-29 12:03:43] RDP (0): client version: 8.0.24428
[2014-Mar-29 12:03:44] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Mar-29 12:03:44] RDP (0): Resolved '10.1.10.11' to '10.1.10.11' using NameResolveMethod_DNS(1)
[2014-Mar-29 12:03:52] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Mar-29 12:03:52] RDP (0): ------ END ACTIVE CONNECTION ------
[2014-Mar-29 12:03:52] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-Mar-29 12:03:52] RDP (0): lo0 af=18  addr= netmask=
[2014-Mar-29 12:03:52] RDP (0): lo0 af=30 (AF_INET6)  addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-Mar-29 12:03:52] RDP (0): lo0 af=2 (AF_INET)  addr=127.0.0.1 netmask=255.0.0.0
[2014-Mar-29 12:03:52] RDP (0): lo0 af=30 (AF_INET6)  addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-Mar-29 12:03:52] RDP (0): gif0 af=18  addr= netmask=
[2014-Mar-29 12:03:52] RDP (0): stf0 af=18  addr= netmask=
[2014-Mar-29 12:03:52] RDP (0): en0 af=18  addr= netmask=
[2014-Mar-29 12:03:52] RDP (0): en1 af=18  addr= netmask=
[2014-Mar-29 12:03:52] RDP (0): en1 af=30 (AF_INET6)  addr=fe80::226:bbff:fe00:c3d7%en1
netmask=ffff:ffff:ffff:ffff::
[2014-Mar-29 12:03:52] RDP (0): en1 af=2 (AF_INET)  addr=192.168.1.29 netmask=255.255.255.0
[2014-Mar-29 12:03:52] RDP (0): fw0 af=18  addr= netmask=
[2014-Mar-29 12:03:52] RDP (0): p2p0 af=18  addr= netmask=
[2014-Mar-29 12:03:52] RDP (0): utun0 af=18  addr= netmask=
[2014-Mar-29 12:03:52] RDP (0): utun0 af=30 (AF_INET6)  addr=fe80::c852:1a8d:126a:a88a%utun0
netmask=ffff:ffff:ffff:ffff::
[2014-Mar-29 12:03:52] RDP (0): utun0 af=30 (AF_INET6)  addr=fdce:4b1d:30c:78f8:c852:1a8d:126a:a88a
netmask=ffff:ffff:ffff:ffff::
[2014-Mar-29 12:03:52] RDP (0): --- END INTERFACE LIST ---
[2014-Mar-29 12:03:52] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-Mar-29 12:03:52] RDP (0): client version: 8.0.24428
[2014-Mar-29 12:03:52] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Mar-29 12:03:52] RDP (0): Resolved 'javpeds.com' to '70.88.173.126' using NameResolveMethod_DNS(1)
[2014-Mar-29 12:03:52] RDP (0): Resolved 'javpeds.com' to '70.88.173.126' using NameResolveMethod_DNS(1)
[2014-Mar-29 12:03:53] RDP (0): Exception caught: Exception in file '../../librdp/private/httpendpoint.cpp' at line 209
    User Message : The gateway failed to connect with the message:
500 Internal Server Error
[2014-Mar-29 12:03:53] RDP (0): Exception caught: Exception in file '../../librdp/private/httpendpoint.cpp' at line 209
    User Message : The gateway failed to connect with the message:
500 Internal Server Error
[2014-Mar-29 12:03:53] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
[2014-Mar-29 12:03:53] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Mar-29 12:03:53] RDP (0): ------ END ACTIVE CONNECTION ------
[2014-Mar-29 12:04:24] RDP (0): *** Application terminated ***
[2014-Mar-29 12:53:47] RDP (0): Final rdp configuration used: gatewayhostname:s:javpeds.com
screen mode id:i:2
use multimon:i:0
session bpp:i:24
full address:s:10.1.10.11
audiomode:i:2
username:s:javpeds\ptraquair
disable wallpaper:i:0
disable full window drag:i:0
disable menu anims:i:0
disable themes:i:0
alternate shell:s:
shell working directory:s:
authentication level:i:2
connect to console:i:0
gatewayusagemethod:i:1
disable cursor setting:i:0
allow font smoothing:i:1
allow desktop com"font-family:'SF Cartoonist Hand';font-size:18px;line-height:normal;" />bookmarktype:i:3
use redirection server name:i:0
[2014-Mar-29 12:53:47] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-Mar-29 12:53:47] RDP (0): lo0 af=18  addr= netmask=
[2014-Mar-29 12:53:47] RDP (0): lo0 af=30 (AF_INET6)  addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-Mar-29 12:53:47] RDP (0): lo0 af=2 (AF_INET)  addr=127.0.0.1 netmask=255.0.0.0
[2014-Mar-29 12:53:47] RDP (0): lo0 af=30 (AF_INET6)  addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-Mar-29 12:53:47] RDP (0): gif0 af=18  addr= netmask=
[2014-Mar-29 12:53:47] RDP (0): stf0 af=18  addr= netmask=
[2014-Mar-29 12:53:47] RDP (0): en0 af=18  addr= netmask=
[2014-Mar-29 12:53:47] RDP (0): en1 af=18  addr= netmask=
[2014-Mar-29 12:53:47] RDP (0): en1 af=30 (AF_INET6)  addr=fe80::226:bbff:fe00:c3d7%en1
netmask=ffff:ffff:ffff:ffff::
[2014-Mar-29 12:53:47] RDP (0): en1 af=2 (AF_INET)  addr=10.59.1.176 netmask=255.255.255.0
[2014-Mar-29 12:53:47] RDP (0): fw0 af=18  addr= netmask=
[2014-Mar-29 12:53:47] RDP (0): p2p0 af=18  addr= netmask=
[2014-Mar-29 12:53:47] RDP (0): utun0 af=18  addr= netmask=
[2014-Mar-29 12:53:47] RDP (0): utun0 af=30 (AF_INET6)  addr=fe80::e590:f4:e6f3:79ee%utun0
netmask=ffff:ffff:ffff:ffff::
[2014-Mar-29 12:53:47] RDP (0): utun0 af=30 (AF_INET6)  addr=fdce:4b1d:30c:78f8:e590:f4:e6f3:79ee
netmask=ffff:ffff:ffff:ffff::
[2014-Mar-29 12:53:47] RDP (0): --- END INTERFACE LIST ---
[2014-Mar-29 12:53:47] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-Mar-29 12:53:47] RDP (0): client version: 8.0.24428
[2014-Mar-29 12:53:47] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Mar-29 12:53:47] RDP (0): Resolved '10.1.10.11' to '10.1.10.11' using NameResolveMethod_DNS(1)
[2014-Mar-29 12:53:55] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Mar-29 12:53:55] RDP (0): ------ END ACTIVE CONNECTION ------
[2014-Mar-29 12:53:55] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-Mar-29 12:53:55] RDP (0): lo0 af=18  addr= netmask=
[2014-Mar-29 12:53:55] RDP (0): lo0 af=30 (AF_INET6)  addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-Mar-29 12:53:55] RDP (0): lo0 af=2 (AF_INET)  addr=127.0.0.1 netmask=255.0.0.0
[2014-Mar-29 12:53:55] RDP (0): lo0 af=30 (AF_INET6)  addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-Mar-29 12:53:55] RDP (0): gif0 af=18  addr= netmask=
[2014-Mar-29 12:53:55] RDP (0): stf0 af=18  addr= netmask=
[2014-Mar-29 12:53:55] RDP (0): en0 af=18  addr= netmask=
[2014-Mar-29 12:53:55] RDP (0): en1 af=18  addr= netmask=
[2014-Mar-29 12:53:55] RDP (0): en1 af=30 (AF_INET6)  addr=fe80::226:bbff:fe00:c3d7%en1
netmask=ffff:ffff:ffff:ffff::
[2014-Mar-29 12:53:55] RDP (0): en1 af=2 (AF_INET)  addr=10.59.1.176 netmask=255.255.255.0
[2014-Mar-29 12:53:55] RDP (0): fw0 af=18  addr= netmask=
[2014-Mar-29 12:53:55] RDP (0): p2p0 af=18  addr= netmask=
[2014-Mar-29 12:53:55] RDP (0): utun0 af=18  addr= netmask=
[2014-Mar-29 12:53:55] RDP (0): utun0 af=30 (AF_INET6)  addr=fe80::e590:f4:e6f3:79ee%utun0
netmask=ffff:ffff:ffff:ffff::
[2014-Mar-29 12:53:55] RDP (0): utun0 af=30 (AF_INET6)  addr=fdce:4b1d:30c:78f8:e590:f4:e6f3:79ee
netmask=ffff:ffff:ffff:ffff::
[2014-Mar-29 12:53:55] RDP (0): --- END INTERFACE LIST ---
[2014-Mar-29 12:53:55] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-Mar-29 12:53:55] RDP (0): client version: 8.0.24428
[2014-Mar-29 12:53:55] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Mar-29 12:53:55] RDP (0): Resolved 'javpeds.com' to '70.88.173.126' using NameResolveMethod_DNS(1)
[2014-Mar-29 12:53:55] RDP (0): Resolved 'javpeds.com' to '70.88.173.126' using NameResolveMethod_DNS(1)
[2014-Mar-29 12:53:56] RDP (0): Exception caught: Exception in file '../../librdp/private/httpendpoint.cpp' at line 209
    User Message : The gateway failed to connect with the message:
500 Internal Server Error
[2014-Mar-29 12:53:56] RDP (0): Exception caught: Exception in file '../../librdp/private/httpendpoint.cpp' at line 209
    User Message : The gateway failed to connect with the message:
500 Internal Server Error
[2014-Mar-29 12:53:56] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
[2014-Mar-29 12:53:56] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Mar-29 12:53:56] RDP (0): ------ END ACTIVE CONNECTION ------
[2014-Mar-29 12:54:05] RDP (0): *** Application terminated ***

How do I uninstall Microsoft Remote Desktop Ver. 2.0.1?

Similar Messages

Maybe you are looking for