How do I uninstall my Canon all-in-one printer software?

How do I uninstall my Canon all-in-one printer software? I followed the online HELP instructions of moving the apps to TRASH. But I still had lots of files, and one app, that I could not get rid of.

Huh! How simple can it be?
Thank you, very much. I still have a few Canon files and one app remaining. I'll send them to the trash. But, the really annoying scanner icon on the bar at the top of the screen is gone.
Thanks, again.
Dave

Similar Messages

Canon all-in-one printer can't print? Please, help

Hello.
I recently bought a Canon Pixma MG3550 all-in-one printer. I didn't get a USB cable in the package so i decided to connect it wirelessly. I tried everything but it just couldn't connect. So, I went to the store and bought a USB cable for printer. I connected my printer with this USB cable and installed drivers from the CD that came with printer. Everything went fine but when it came to the part where I can print test page I clicked 'Execute' and nothing happened. I gave up that and clicked next. When I tried to print a picture it says: 'Windows photo viewer encountered a problem printing your picture. Trying reinstalling your printer, and then try again.' When I tried printing a PDF document nothing happened.
So, my computer (Windows 7, 32 bit) recognizes this printer in Devices and Printers and it's set to deafult printer, but when i click 'Printing Preferences' it says 'Operation could not be completed' and when I click printer properites, it says: 'The Canon MG3500 series printer driver is not installed on this computer. Some printer properites will not be accessible unless you install the printer driver. Do you want to install the driver now?'. If I click Yes, the Add printer driver wizard shows up, but when i go through it and finish it it's still the same. Also, if I click 'Print test page', it says: 'Test page failed to print. Would you like to view the print troubleshooter for assistance? Access is denied.'
Then, if I go to troubleshooter it says that everything is fine. When I go to Canon Quick Menu and click 'Start my printer' it says 'the supported printer cannot be detected' but when I go to 'Diagnose and Repair Printer' it says that everything is okay.
I don't know what to do. I tried reinstalling driver thousands of times, I downloaded drivers from this site and everything, but it's all the same. Also, every time I turn on my printer on button I hear some weird noises two times about 5-10 seconds altogether. I don't know if this is related somehow, but I don't think that my device is broken because it can connect to pc and scanning works perfectly, but printing and copying doesn't.
Please help me, I'm desperate. I'm trying so hard but everything is the same and I'm so tired of this.
Thank you.

If you have any questions, feel free to ask. I hope this helps.
**Click the KUDOS star on the left to say 'Thanks'**
Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

Installing HP Photosmart 7520 all in one printer software

My new HP Photosmart 7520 will not install on my Dell PC. I have the 32-bit Windows Vista OS. When installation begins I immediately get the error message: "Key not valid for use in specified state". I've tried installing the CD and the software from HP on-line, all several different ways. I 've used the troubleshooting download from HP but both methods do not solve the installation problem. I've temporarily disabled the firewall. I've done disk clean-up and defragmenting. I've restarted the PC more than a dozen times during my efforts. Even Microsoft Windows can't install all the software from updates - only the fax portion. If I can get past the point where the error message occurs I think the software will install.
I hesitate to try the Geek Squad. My experience with them is that most of the geeks aren't competent and it's a crap shoot getting assigned one that is. They will be my last resort.
Has anyone had this problem? Does anyone have a solution?

Hey @jimlg ,
Welcome to the HP Forums!
I understand you're unable to install the printer drivers for your Photosmart 7520 printer.
The error you have listed is a Windows error and not attributed to the printer software. You can confirm this with the fact the error occurs when trying to install from Windows update bypassing our installer.
You may want to try following the suggestion in this thread made by @Gemini02 which seems to help resolve the issue for some users experiencing the same problem: Re: key not valid for use in specified state.
Let me know if that helps.
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

Old All-In-One Printing Software

I have lost my old All-In-One HP printing software, due to buying a new computer and new HP printer. Can I get that old software so that I can open my Xmas Card album again?

Hi,
Your new printer should come with a new software called HP Photo Creations. Please use this new software to make Christmas cards, the old software may not work on your new computer. If you can't find it on the CD, please download from the following link:
http://www.hp.com/global/au/en/consumer/digital_photography/free/software/photo-creations.html
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How can I get my canon all in one to scan in maverick

After upgrade to maverick and updating drivers, the scanner in my Canon mp990 won't work. MP navigator keeps crashing. I have tried adding the scanner part in as a seperat item in the list but that won't work . Frien has same Canon problem. Suggestions?

(Sorry, I mistyped a 5 instead of MP Navigator 3 in my prior response.)
And you saw the note about needing to set up Navigator Opener with Image Capture before scanning using the Operation Panel or Scanner Buttons OS X 10.7, 10.8 and 10.9? I think that's if you want to use the scanner buttons directly on the machine while saving the scan to your computer, rather than scanning from the MP Navigator control screen on the computer, but it couldn't hurt.
I don't own an MP990 but my MG5320 began working on Mavericks once I downloaded and then installed all the updated software dmg files by double-clicking and the updated MP Navigator EX and EX opener.
Previously, I was on OS X 10.6.8.
If everything is installed correctly, I think you should see both a Print and a Scan selection button above the printer description in , System Preferences, Hardware, Printers and Scanners
I have my current printer installed twice, once with USB and once with WiFi. As you can see below, the USB version does NOT show the Scan button for the USB connection (because the printer is not connected via USB at the moment)
And as a last resort, you could try resetting the print system.
Note that ALL saved print 'Presets' you have configured will all need to be documented before re-setting and then re-created after resetting the print system, that's why it's listed as a last resort. I usually end up with a dozen or so Presets I create for the jobs I use all the time (Fast duplex, fast 2-up duplex, legal landscape, Matte Photo paper, 4x6 borderless, and so on, but I've recreated them so often that I remember most of the settings and don't have to write everything down.
http://support.apple.com/kb/PH14141
Message was edited by: kostby

How to tell if HP L7580 All In One printer is wireless ready or not

Hi -
How do I tell if my particular printer is capable of supporting wireless? And if it is, whether it has a wireless card already installed? And then how do I activate it?
I clicked on set-up until I got to the "Network" option, and clicked -ok-, but there is no wireless option. Does that mean I don't have wireless capability at all, or that maybe I never installed wireless at somepoint in set up. I don't have a setup disc for Windows 7. I just have the ones for XP, 2000 and Vista (yep, I've had the printer for a while!)
Thanks for the help!
Dave

Hi Dave,
The HP Officejet Pro L5780 is not a wireless printer, it is a USB and a wireld network printer.
You may find its specificatiosn below:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00839084&cc=us&dlc=en&jumpid=reg_r1002_usen_c-0...
You may connect it to your router using an ethernet cable, then you may install it on your wirelessly connected computer.
You may download the Windows 7 software from the following link:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-79356-2&cc=us&dlc=en&lc=en&...
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

How do you make an MF4770 all in one printer print?

I just got an MF 4770 and all I see is copy, fax and scan on the front. How do I get it to print?
Also, how do I choose a printer when I don't see an icon in the dock? Where do I choose it from.
I have already dowloaded and installed the two drivers... now I'm stuck and there is NOTHING in the manual about this. They don't even mention printing. How is that even possible?
I'm on a Mac 10.9.4

You print from an application. You scan, copy, fax from the printer.
Have you opened a document on the Mac or an email message in Mail and tried to print?
You can verify that the printer is installed properly by going to Applications>System Preferences>Printers & Scanners
John Hoffman
Conway, NH
1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

How to stop HP Photosmart C3150 All-In-One Printer from printing test page

The printer prints a test page when I turn the printer power on. Is ther away to turn this function off? The printer worked fine until I put new black ink (HP92) in. The computer syst. is Windows XP Professional Ver. 2002 Service Pack 3

Hard Reset – While printer is powered ON, pull
the power cord from the printer then from the
wall. After 30 seconds reconnect power to wall
and printer. This will trigger a ‘dirty power up’
and restore the printer to a known good
condition (if it is possible). No user settings are
lost with a ‘hard reset’.
This ‘Hard Reset’ is one of the most powerful
tools to use when the printer hardware is not
functioning properly!
Although I am working on behalf of HP, I am speaking for myself and not for HP.
Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name : )
If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly : )
Happy Troubleshooting : )

Lj cm1415 All-in-One printer software will not install in Windows XP

Have windowsxp and no problem with my printer and scanner, lj cm1415fnw, then the scanner stopped working.
my IT guy uninstalled and now we can't install. Error message, does not support this windows software?
It did before, Help please
thanks Terry

Hi Terry,
Try installing the latest drivers below:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=kj-85658-7&cc=us&dlc=en&lc=en&...
As well ensure you have full administration rights to install the software, a such may appear due to insufficient permissions of your user account.
Hope that helps,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

HP 7510 all in one printer driver problem

Trying to reload HPPhotosmart 7510 series all in one printer software. Have CD/downloaded newsest version from HP.com, have uninstalled all versions etc....have downloaded hppiw /hp prin and scan doctor when running HP doctor indicates two 7510 series (Net) and not net.....just the IP/MAC information as listed on the printer. However when trying to load the software it uses the non-net IP address...it can identifies the IP address for the printer, when using older printer software it works wireless and prints .,....however when trying to load software automatically get error message "unsuccessful network installaion" the prinert was unable to be installed over the network...tried with printer cable, it would not accept.....looking at the Device Manager, Other devices 5 listings of HP Photosmart 7510 series (1 has exclamation point 4 have question mark icon, within the properties of each inidcates that "the drivers dfor this device are not installed)...attempted to uninstall each to no avail..have 6 listings of Photosmart 7510 series all with the exclamation icon and same properties....not installed. same situtation tried to uninstall, to no avail.......have tried other suggestions which were listed on forum to no resolution....any suggestions greatly appreciated..thanks

Hello etrout17,
Welcome to the HP Support Forums!
I see you are having some install issues with the HP Photosmart 7510, it shows multiple printers in the installers and even more in the Device Manager. What version of Windows is installed on the computer?
Have you been able to add the printer from the Devices and Printers? This of coarse is not a fix for the issue but my allow you to get some printing done.
I will research the issue more and wait for your reply.
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Please tell me how to easily scan a document to email on my Canon mg5420 all-in-one printer

Please tell me how to easily scan a document to email on my Canon mg5420 all-in-one printer; the directions are hard to understand.

Hi figgienewton,
To scan an item to be attached to an email, please follow these steps:
1. Open the IJ SCAN UTILITY program.
2. In the Canon IJ Scan Utility window that opens, click SETTINGS.... in the bottom right of the window. The Settings dialog box appears.
3. Click the DOCUMENT SCAN or PHOTO SCAN option on the left pane of the window, depending on what you would like to scan.
4. In the right pane of the window, locate the APPLICATION SETTINGS section, then click on the radio button next to the ATTACH TO EMAIL option.
5. In the drop-down arrow next to the ATTACH TO EMAIL field, select your email application. If your email program is not listed, please click the ADD... button to navigate to the location of your email program, then click OK to have that email
program added to the drop-down field.
6. Once your email program has been specified in the APPLICATION SETTINGS section, click the OK button at the bottom of the window to save the changes. The IJ Scan Utility main screen appears.
7. Click the DOCUMENT or PHOTO button, depending on what you are trying to scan and attach to email. Scanning starts. When the items are finished scanning, your email program will be launched and the scanned item(s) will be attached.
Hope this helps!
This didn't answer your question or issue? Please call or email us at one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

OS X 10.6.7 Canon All-in-One 480 Printer will not print files, only blank pages. Have to go to Utilities, Disk Utility and Repair permissions for a temporary fix. How can I get a permanent fix?

After upgrading to OS X 10.6.7., my Canon All-in One MP 480 printer will not print. it says it is printing, but the sheet of paper just runs through the printer and comes out blank. I finally went online to just answers.com and got a fix involving the System preferences, printer and fax. i was told to go to Applications in the HD, thenUtilities, then Disk Utilities, highlight the HD and check on Verify Disk. If it says Disk is OK, click on Repair Permissions. At first, that worked, but the next time I went to print after turning the printer off, it refused to print and just ran the sheet of paper through blank. Once that happens, there is no way to go back to printing the file that failed. I fiinally had to copy and paste the info from the file that would not print and put it in an email to myself and then print that. This is very frustrating, and I would really like a final solution for the problem.
bettyfroomneedham

There's a lot there, so I'll start with the parts I can answer quickly.
The "ACL found but not expected..." messages can be safely ignored, so says this article
http://docs.info.apple.com/article.html?artnum=306925
(look below all the "SUID" examples)
I had changed my Desktop image earlier but when the "Installing 1 item" window came up it changed back to the back ground that you first see on your desktop after installation.
Leopard installs updates a bit differently. If it's simply an application that does not change system files, it installs them like before, without having to restart. If the update is to the system, then you must immediately "restart," It then goes to that stars and purple screen to perform the installation. Before, it would do the installation while you still had control of the Mac and would prompt you to restart when it finished the installation. This change probably make things more secure and reliable, because you aren't allowed to do other things on the Mac while system updates are being installed.
Please post back with the remaining point of concern.

Hp 6310 all in one printer keeps automatically uninstalling

HP 6310 All-in-one printer purchased in 2008.
The printer keeps automatically uninstalling itself.
1. I have tried everything including downloading drivers.
2. I have completely uninstalled and reinstalled from disc. It still keeps happening.
3. I have tried leaving the computer and printer on over night so that the setup does not change. No it still happens.
4. Even when I do get it printing. It can print of some pages. The after some pages it decides that it and the printer has again uninstalled.
5. It can take hours to get the printer to work. Installing, switching the printer on and off. Even when the printer is set up and states its all ok. The printer won't work. Well sometimes it might but mostly not.
HELP.
Vi

Hello @Vipro9 , and welcome to the HP Forums, I hope you enjoy your experience!
I see you are experiencing printer driver issues. I would love to try and help you, but I do need a little information first. I am linking a few HP Support documents below that will show you how to find which operating system you are using. Also, if you're using Windows, please include whether your operating system is 32-bit or 64-bit.
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Also, do you have the same issue making a copy as opposed to a print?
Good luck and please let me know the results of your findings. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

How do I uninstall Adobe Bridge CC on one computer so that it can be installed on another computer?

How do I uninstall Adobe Bridge CC on one computer so that it can be installed on a new computer?

You can install CC on two computers and use them both (even different OS if needed)
You can also sign out with your Adobe Creative Cloud application on one computer and log in on another computer, the max of active systems is 2 but it should be possible to have them on multiple systems with signing in and out.
Here is a link to the CC FAQ pages:
http://www.adobe.com/products/creativecloud/faq.html

I have an HP Officejet 7210 all in one printer, have loaded Printer Pro to IPad, get successful test pages in the Print Pro App but can't print emails (or anything). error message is No AirPrinter found. How can I get connected?

I have an HP OfficeJet 7210 all in one printer, have loaded Printer Pro and had a successful test while in Printer Pro. When I try to print and email I get NO AIR PRINTER message, How can I connect my printer to my IPad and print emails.

Welcome to Apple Support Communities.
If you're using the Printer Pro app, you're not going to use AirPrint services.
They are not the same thing.
Are you using the 'Open In' option to get the email into Printer Pro for printing?
http://itunes.apple.com/us/app/printer-pro/id393313223?mt=8
Once installed, Printer Pro appears in the "Open In..." list on your device. This lets you print documents from Mail, Safari, ReaddleDocs and many other applications on your iPad that supports this function.
Using "Open In..." approach you can print files from many popular online storages: Dropbox, MobileMe iDisk, GoogleDocs. It just a matter of several taps to download your file via free Dropbox, iDisk or Google Docs application and send it to printer.

How do I uninstall my Canon all-in-one printer software?

Similar Messages

Maybe you are looking for