How do I uninstall print drivers that do not work?

I've downloaded the HP drivers for 10.6 from here
http://support.apple.com/downloads/HPPrinter_Drivers_for_Mac_OS_X_v106
However, I am still unable to get my HP PSC 1400 to print via the Time Capsule. Since the driver package ended up being +500 MB, is there any way that I can uninstall these drivers to regain that space?

So the printer drivers for the PSC1400 series unfortunately did not make it onto the DVD. They will be available through a software update at some point in the future. You should able to install the 10.5 solution to get basic functionality working again. As for deleting the files, yes there is a way, but it still leaves some of the files laying around so software update won't work.
If you want the space though, most of the files are in /Library/Printers/hp. That being said the software update to provide printing support will probably put most of them back.
Just trying to help.
Andrew

Similar Messages

  • How do I uninstall printer drivers on my MacBook Pro?

    How do I uninstall printer drivers on my MacBook Pro?

    Remove the undesired driver from Macintosh HD > Library > Printers

  • How do I uninstall Firefox version that does not run on my Droid Eris?

    I installed Firefox mobile on my HTC Droid Eris and then realized it does not work on this phone. How do I uninstall this when it does not even show up in my application downloads where I usually uninstall other apps?

    Firefox should normally show up in the "Downloads" section of the Applications settings, like other apps. If it's not there, then there must have been a problem during installation. If it appears that Firefox is installed but is not listed in the settings, the only way I know to fix it is to do a "Factory reset" of all data on the phone. Sorry!

  • HT5610 how do I deauthorize a pc that is not working

    how do I deauthorize a pc that is not working

    Use the Deauthorize All command documented in this article.
    (99228)

  • How to uninstall NI drivers that are not removable via "Add/Remove Programs"?

    Hi,
    I am trying to uninstall older versions of NI MAX and DAQ drivers via "Add/Remove Programs" in Control Panels on a Win2000 test PC, but nothing happen when the "Remove" button is pressed. The same issue does not happen with any other drivers or applications installed on the same test PC. These two drivers might have been installed improperly before. Please advise how I can uninstall them without using "Add/Remove Programs"? Thank you very much for your help.
    Valen

    Hello LA,
    The window that I have is different from the one you posted. Please see attached for mine. When I clicked on REMOVE, a message popped up and disappeared within a couple seconds. And the message is as following: "The installer is verifying the installation, please do not reboot while this dialog is being display." This same message popped up every time REMOVE is clicked but I have no luck on removing MAX.
    This test PC is for legacy testing and it was with Windows 98 and have an ISA DAQ card installed that requires DAQ driver 6.9.3. Can upgrading the test PC to Windows 2000 corrupt the installation?
    Looking forward for your advice. Thank you.
    Valen
    Attachments:
    Add Remove Programs.doc ‏57 KB

  • How do I uninstall a program that is not listed in add/remove​?

    Running Windows 7 Home Premium 32-64bit. Hp p6210f.  Installed SIIG USB 2.0 video capture device.  Program installed but did not work. Downloaded updated driver to my desktop. The following icons appeared on my desktop: Applications, DirectX9, Driver,atutorun, autorun,autorun, autorun.tgt and key. Have no idea what to do with these icons. Clicking on Autorun does not work.  Reinserted the install CD to try and uninstall program but there was not uninstall listed.  Also the program does not show in Add/Remove.  The program is shown under Programs X86. I don't understand how to install the driver or how to use this program  The program is listed as "Honestech VHS to DVD 3.0 SE". I would just like to get rid of this program.  Can anyone tell me how?
    Thank you,
    Pauley

    Hi,
    If you are not able to uninstall the software in the usual way from Programs and Features, you could try a third party uninstaller such as the application detailed below.
    Download and install the free version of Revo Uninstaller from the link below.
    http://www.revouninstaller.com/download-freeware-v​ersion.php
    Run revo and see if this detects the installation.  If it does, right click on the icon of the program you wish to remove and select Uninstall. During the process you may be asked to delete registry entries, just select all and then click delete. Do the same for any left-over files and folders. Once the uninstall has completed, restart the notebook.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • How do you fix the sound that's not working on an iPad mini?

    OK so the sound on it does not work. It's turned up all the way but nothing is still coming out. When I plug headphones into it, it works just fine and normal but without it, nothing. I looked up on google at the options of how to fix this and they pretty much all said to just turn it off and then back on. It also said to hold the power button until the swipe to turn off pops up and then to dismiss it. Plus one saying to hold both the home and power buttons down. I turned it off and then back on, as well as the other options but still nothing.
    Am I doing these things wrong? Is there any other way that this can be fixed?

    Give Nice Clock a look see.
    NiceClock - The beautiful clock for iPhone and iPad (free version) by Michi Zurmühle
    https://appsto.re/us/jjJeG.i

  • I have lost my itunes on the latest upgrade from itunes, i've tryed to uninstall everything apple that did not work.

    i have lost my itunes when installing the new upgrade,it says i have to install msvcr80.dll. i tryed to uninstall everything apple but that didn't work , they won't uninstall. i'm not very computer savy, i only use itunes for my ipod and play some games

    Hello confused86,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Check for .dll files
    Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
    If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
    Reboot your computer.
    Note: Depending on your operating system, you may only have one of the listed paths.
    Uninstall and reinstall iTunes
    Uninstall iTunes and all of its related components.
    Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
    Re-download and reinstall iTunes 11.1.4.
    Best of luck,
    Mario

  • How can i delete a file that is not working?

    Hi there. I have the following problem. Under the all files folder there are a couple of .avi files that do not appear anywhere else on my system, they are not working and they cannot be deleted or opened! When I click on them, I get a message that says delete, repair alias or ok. Click delete or ok and nothing happens, click repair and it says locate the original file. When I do so, again nothing happens!!
    Can anyone please help? I want to get rid of them as they are taking over a precious 10GB on my macbook air
    Thank you

    OK, this officially crosses over to the bizarre.
    I believe booting from the Lion recovery partition and selecting Disk Utility is next. Run "repair disk". I believe that it will find some directory corruption and should fix it.
    Here are a couple of places to go for more help, courtesy of Pondini.
    Verify your internal HD, per #6 in Using Disk Utility.
    If that doesn't help, see Where did my Disk Space go?

  • How do I fix a shortcut that is not working?

    A common keyboard shortcut is not working. When I want to resize an image and keep the dimensions as I resize the image box up or down, I usually click one of the image box corners, hold down shift + command, and the dimensions of the box, along with the image inside resize in the same dimension. How can I fix this problem? Resetting the preferences folders did not work.

    No, the constraint keys have not changed.
    Check the system prefs to be sure the OS isn't using the shortcut, and also your web browsers.

  • How to fix my iPhone keys that will not work

    When I am using my iphone keyboard, the upper row Q thru P will not work. That is in verticle mode, when laid horizontally, the R will not work.
    On the number keys, the 4 will not work. The comma key also does not work. 
    I was told that a software restore could cure this.  Also, I tried to load the new version 7 software, hoping this might help.  But the Accept option would not work when accepting the TERMS from Apple.  It seems that only works in verticle so that whole row/area does not work.

    RESET DEVICE
    Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost).

  • How do i fix a microphone that is not working in my macbook?

    a while ago someone plugged her headphone into the jack and it took a while before i got sound out of my internal speakers. now when i try to skype and use the mic, the other caller cannot hear. how to fix the mic?

    No, the constraint keys have not changed.
    Check the system prefs to be sure the OS isn't using the shortcut, and also your web browsers.

  • How to select all the people that are not in any equipe  ?

    Hi,
    I have a nice SQL expression that gives me as a result all the "AGENTS" (people) that are working in an EQUIPE (a team)
    select a."AGENT_ID",
    a."NOM" || ' ' || a."PRENOM" "Nom",
    c.libelle "Equipe",
    a."DATE_EMBAUCHE" "Date embauche",
    a."DATE_DEBAUCHE" "Date débauche"
    from OBSERVATOIRE."AGENT" a,
    observatoire.equipe_agents b,
    observatoire.equipe c
    where a.agent_id = b.agent_id
    and b.equipe_id = c.equipe_id
    order by nom
    Now, how to select all the agents that are NOT working in any "EQUIPE" (team) ?
    I have tried but could not succeed !
    Thank you for your kind help.
    Christian

    Christian from France wrote:
    It is not working because the table EQUIPE_AGENTS does not contains a row if the agent is not into any equipe.
    CREATE TABLE "OBSERVATOIRE"."EQUIPE_AGENTS"
    (     "EQUIPE_AGENTS_ID" NUMBER NOT NULL ENABLE,
         "EQUIPE_ID" NUMBER NOT NULL ENABLE,
         "AGENT_ID" NUMBER NOT NULL ENABLE)
    CREATE TABLE "OBSERVATOIRE"."AGENT"
    (     "AGENT_ID" NUMBER NOT NULL ENABLE,
         "GRADES_ID" NUMBER NOT NULL ENABLE,
         "NOM" VARCHAR2(50 BYTE) NOT NULL ENABLE,
         "PRENOM" VARCHAR2(50 BYTE),
         "DATE_EMBAUCHE" DATE NOT NULL ENABLE,
         "DATE_DEBAUCHE" DATE)
    The only way to "know" if an agent is not into any equipe (team) is to search into the EQUIPE_AGENTS table, and if we do not find the ID of the agent into this table, then we know that this agent is not into any EQUIPE (team).
    I don't know ho to translate this into SQL.And that's what my query does. It uses an OUTER JOIN so that a result record is returned whether or not there is a record in EQUIPE_AGENTS. And the check for EQUIPE_ID is NULL restricts the result set to those where there IS NOT a record in EQUIPE_AGENTS.
    A more traditional way would be to use NOT IN or NOT EXISTS clauses, but they can prove inefficient.

  • I am having trouble printing a PDF document. Whenever I click print nothing happens but when I am printing documents from Word, Excel etc they print without a problem. I've tried printing as image but that did not work. I uninstalled Adobe Reader XI and d

    I am having trouble printing a PDF document. Whenever I click print nothing happens but when I am printing documents from Word, Excel etc they print without a problem. I've tried printing as image but that did not work. I uninstalled Adobe Reader XI and downloaded Adobe Reader X instead and that still doesn't work. I have Windows 7.

    Hello,
    Please follow the link to troubleshoot the printing issues with Adobe Reader:- Troubleshoot PDF printing | Acrobat, Reader.
    Regards,
    Nakul

  • How can I send a file that CAN NOT be printed or saved by the recipient?

    How can I send a file that CAN NOT be printed or saved by the recipient?

    Impossible. PDF files don't stream, so they cannot be opened until they've been saved.
    You can truly prevent printing by using DRM, or ask nicely by using a permissions password (though that's ignored by non-Adobe software).

Maybe you are looking for