How do i unistall the numbers prgram?

how do i unistall the numbers porgram?

The way you uninstall any other application in Mavericks that was downloaded from the Mac App Store.  See this support document from Apple.
SG

Similar Messages

  • How do I get the Numbers application iOS 7.0.4 unstuck updating on iPad 2?

    How do I get the Numbers application unstuck in updating on iPad 2?   After the last update of iOS 7 it started acting up. Then weeks ago (in November) I opened the application right after iOS 7.0.4 update and while accessing a file it got stuck, some files are white and I can access them. Other files are gray and I can not open them. The application goes white when it first opens up instead of just opening then there is a delay, then it eventually opens.  It is stuck updating.
    I have tried various things. 1) Rebooting, 2) hard reboot (holding down the off button and home key until the apple icon appears), 3) tried putting it in Airplane mode-reboot-then connect to computer and iTunes-then rebooted. 4) tried opening a file in another application- I get an error message that says : can't open spreadsheet- this spreadsheet is updating, wait for it to finish then try opening. 5) sending spreadsheet- I get an error message that says : this spreadsheet is updating, wait for it to finish then try sending.  None of these have worked.
    I am at my wits end I use these files for my business and I am self-employed, some files I can't access at all, this is very serious for me. If you know how to fix this please help me.  I transferred all of my NECESSARY and IMPORTANT client files to Numbers from Excel, I've been using Numbers successfully for about 1 year.

    Better to post your topic in the developer community >  Developer Forums: Apple Support Communities

  • I use a French bluetooth keyboard how do i lock the numbers for doing calculations? Does anybody know? i.e. the numbers are above the top row of keys and you have to use the shift key to access them.  You can't use the cap lock key to lock the numbers.

    How do I lock the numbers on a French keyboard if I'm using a small blue tooth keyboard with no number pad?

    How do I lock the numbers on a French keyboard if I'm using a small blue tooth keyboard with no number pad?

  • How do I get the numbers ipad app to plot a graph of dates against values, where the most recent date is on the right of the graph, but the most recent date is at the top rather than bottom of the rows in the table?

    How do I get the numbers ipad app to plot a graph of dates against values, where the most recent date is on the right of the graph, but the most recent date is at the top rather than bottom of the rows in the table?
    Also how can it be a line graph without plotting a circle at each value?
    Thanks this is very frustrating

    Make a copy of the table and produce your Line chart or Bar chart from the copy. Sort the copy into the order you want to see in your chart.
    Alternately you could use a Scatter Chart...
    Jerry

  • How do I move the numbers or bullets closer to the list?

    Oh Dreamweaver sages...How do I move the numbers or bullets closer to the list?  Please look at this  http://www.stii.us/whatisst.html  and tell me what you recommend.  Thank you!

    With CSS margins and padding.
    #mainContent li {
      margin-left:10em;
      padding-left:0;
    Also remove the <p> tags from all your <li> tags.
    <ol>
         <li>this is a list item</li>
         <li>this is a list item</li>
         <li>this is a list item</li>    
    </ol>
    Nancy O.

  • Hi how do I unistall the Adobe downlaod assistant from MacBook Pro?  I've managed to unistall the Acrobat Pro and the Acrobat Pro Cloud but the assistant app doesnt give me this option (I'm suing Finder). Thanks

    Hi how do I unistall the Adobe downlaod assistant from MacBook Pro?  I've managed to unistall the Acrobat Pro and the Acrobat Pro Cloud but the assistant app doesnt give me this option (I'm suing Finder). Thanks

    AMelie Eliabeth the Adobe Download Assistant can be dragged to your trash can.  There is no separate uninstaller or any other application files to remove.

  • HT1343 if one is using windows 8.1 on a boot camped mac and you are using a mac keyboard . How does one unlock the numbers  on the larger wired keyboard ( numbers keys to the right of the keyboard) instead of having to use the numbers at the top of the ke

    Question: I am using a mac , wired Keyboard, on  a windows 8.1 platform ( this is because I have boot camped my hard drive) Unfortunately when I change over from my mac set up into the windows 8.1 the key board does not behave like it does when I am using as a mac. The numbers , on the right of the keyboard , no longer function and I have to use the numbers at the top of the keyboard, very annoying. Can anybody let me know how I unlock the numbers on the right of my keyboard?
    Regards CM

    I have stated every issue I’ve had so far in a fairly clear and concise way. I think if you read what I wrote, it all makes logical sense as to what is going on. Windows 7/8 would work just as well on a Mac if it was supported the same way the OS is for other OEMs.
    As I stated earlier in the post, I’m having these same issues in windows 8, not just 8.1, which is the reason for the post. I know the difference between supported by drivers and not supported by the manufacturer. The fact that when Haswell mbp’s came out and no revision to bootcamp for the new hardware was released to fix issues with installing windows on the new hardware shows Apple clearly Is not supporting bootcamp as strongly as they advertise.
    I am being realistic on Apple having drivers early. Anyone with an MSDN subscription can download the RELEASE version of windows months ahead of the actual release, I’m 100% sure if any average consumer can do that by paying $100 and saying they are a developer, apple can do it just as easily.
    You aren’t much help, you haven’t answered really anything to my post, nor have you contributed any knowledge that wasn’t clearly posted above, so don’t say anything if you don’t have anything to contribute.
    By the way, my rant is directed at apple, as you can see because I am saying “Apple, if you are going to…” because this is an Apple forum on Apple’s website. It is not directed to end users, clearly.

  • How can I create the numbering of the week in ICal

    I want to know how I can adjust ICal with the numbering of the week. I really need the number of the week often.
    Can somebody give my an answer, I looked for it and I can't find the option?
    Regards,

    Teduister,
    Welcome to Apple Discussions.
    According to Hawk Wings, you may want to consider: NumSemaine...NumSemaine is a little app which adds the week of the year to “All Day Event” Section of your iCal window.
    Not least, this drives home how soon Christmas will be upon us.
    It can also generate a ics file containing all the weeks of the year and their date ranges.
    ;~)

  • How do you print the numbers next to the first column

    In Numbers I can't figure out how to print the numbers next to the first column to the left. Say I have 350 people on a list and I want to print the sheet with the numbers next to the people's name, how do I do that. Excel automatically does it. However, I cannot find the option to print and include the numbers from the standard Numbers worksheet. Thanks for your assistance.

    In excel it is actually in the page setup dialog. under the "sheet" tab. Numbers doesn't have one table per page (excel is basically one large table of cells). So printing header and column labels doesn't really work in numbers, because those labels don't show up until you click inside the tables. If you notice when you do that they abstruct the view of everything else that might be near the edge of the table.
    The other posters response is the best way to do it. you can get column Numbers (but not letters) by using the column command in an extra row at top also. Thre is a way if you really want column letters, but it ain't pretty. Let us know if you want that too.
    Jason

  • HT4623 how can i get the numbers and keynote app to work on my imac?Help!

    I downloaded the numbers and keynote apps but how do i get them to open and work on my imac or ipad?

    If you downloaded the iPad apps in iTunes on your computer, you have to sync them to the iPad. If you downloaded the Mac apps from the Mac App Store, they should open on the Mac, so I think we have to assume that you downloaded the apps for the iPad.
    The apps that work on the iPad do not work on the Mac, and the Mac apps will not work on the iPad. The Mac and the iPad have different operating systems so you must purchase the apps for both the computer and the iPad.
    If you did buy the iPad apps in iTunes on the Mac - sync them to the device.
    Connect the iPad to the Mac and launch iTunes.
    Click on the iPad name on the left side under devices.
    Click on the Apps Tab on the right.
    Click on all of the apps that you want to sync in the list
    Click on the Sync Apps Heading.
    Click on Apply in the lower right corner of iTunes

  • Table monitoring , how do oracle count the numbers ?

    hi,
    i'm looking at all_tab_modifications , just couldn't figure out where those numbers from ,
    DB.9208 , table partitioned
    looks like it off of what it should be
    my question is
    1. when does montioring take place , and by how?
    2. is the number cumulative from monitoring turn on ? from instance restart ? or between two snaps ?
    3. offical doc says like inserts is Approximate number of inserts since the last time statistics were gathered
    that means the number recycles after snap taken , it goes on by every DML , but i have insertions against a table which says inserts is 0
    4. some says to reflect the newest exec dbms_stats.flush_database_monitoring_info; which is even more confusing for me and makes no difference in my case
    thanks
    TABLE_NAME                        INSERTS    UPDATES    DELETES TIME
    T_GB_RA_PAGING                     0          0    2372389 20081125 005005
    T_IU_OVERLOAD                      0          0          0 20081125 005005
    T_RAUM                             0          0   13963245 20081125 005005
    T_GB_SGSN_DATA                     0          0      33283 20081125 005005
    T_IU_SGSN_DATA                     0          0          0 20081125 005005
    T_SESSION_MANAGEMENT              82          0  386950042 20081125 005005
    T_DATA                            82          0    1595707 20081125 005005
    T_USER                            82          0     112562 20081125 005005
    T_MOBILITY_MANAGEMENT             82          0  515890902 20081125 005005
    T_DIPN                            82          0          0 20081125 005005
    T_RAUM                         22409          0          0 20081125 103237
    T_SESSION_MANAGEMENT          365547          0          0 20081125 103237Edited by: zs_hzh on Nov 24, 2008 10:35 PM

    1. when does montioring take place , and by how?When you create a table, by default, it is set in MONITORING mode.
    SQL> create table testtable as select * from all_objects where 1 = 2;
    Table created.
    SQL> select monitoring from user_tables where table_name='TESTTABLE';
    MON
    YES
    2. is the number cumulative from monitoring turn on ? from instance restart ? or between two snaps ?http://download.oracle.com/docs/cd/B19306_01/server.102/b14237/statviews_2097.htm#i1591024
    <quote>
    ALL_TAB_MODIFICATIONS describes tables accessible to the current user that have been modified since the last time statistics were gathered on the tables.
    <quote>
    3. it goes on by every DML , but i have insertions against a table which says inserts is 0Is your table in MONITORING mode? If not, there will be no records in this view for that table.
    4. some says to reflect the newest exec dbms_stats.flush_database_monitoring_info; which is even more confusing for me and makes no difference in my caseIt could be related to answer for #3.
    Refer to this small demonstration.
    SQL> execute dbms_stats.gather_table_stats(user,'TESTTABLE');
    PL/SQL procedure successfully completed.
    SQL> select * from all_tab_modifications where table_owner=USER and table_name='TESTTABLE';
    no rows selected
    SQL> insert into testtable select * from all_objects;
    55958 rows created.
    SQL> commit;
    Commit complete.
    SQL> select * from all_tab_modifications where table_owner=USER and table_name='TESTTABLE';
    no rows selected
    SQL> execute dbms_stats.flush_database_monitoring_info;
    PL/SQL procedure successfully completed.
    SQL> select table_name, inserts from all_tab_modifications where table_owner=USER and table_name='TESTTABLE';
    TABLE_NAME                              INSERTS
    TESTTABLE                                55,958
    SQL> insert into testtable select * from all_objects;
    55958 rows created.
    SQL>  select table_name, inserts from all_tab_modifications where table_owner=USER and table_name='TESTTABLE';
    TABLE_NAME                              INSERTS
    TESTTABLE                                55,958
    SQL> execute dbms_stats.flush_database_monitoring_info;
    PL/SQL procedure successfully completed.
    SQL>  select table_name, inserts from all_tab_modifications where table_owner=USER and table_name='TESTTABLE';
    TABLE_NAME                              INSERTS
    TESTTABLE                               111,916

  • How do I retrieve the numbers for the data connection

    eg. Entry DN: orclapplicationcommonname=portal.050406.0221,cn=portal,cn=products,cn=oraclecontext.
    How can i get my numbers as shown on the line above?
    Thanks in advance

    I might not have understood your question. Do you want to know how the number 050406.0221 is constructed or do you want to know how the Portal application connects to the database?

  • How do I reshuffle the numbering of my songs in a playlist?

    Up until iTunes 11, when I started playing a playlist in Shuffle mode, it resheffled the songs and renumbered them for this session.  This gave me an option to see if similar-sounding songs were by the same artist, or from the same album.  Now in iTunes 11, it jumps around the playlist, but never shows me the new, currently playing listing.  Is there a way to force iTunes to show the songs it has played in this session?

    In order to change the order of a playlist, you MUST click on the first header to sort by that column (the numbers column). If you are sorting by other columns (e.g. Artist, title, etc.) you can not reorder manually.
    Patrick

  • How do I see the numbers I texted on my verizon?

    I have a prepaid iPhone plan. Im the only number on the account, and the acct owner. I need to see the numbers I texted/ texted me at certain times and when I go to usage the number fields are left blank? Thank you so much for your time and God bless:)

        xoangelheartxo,
    Keeping a tab on numbers you've contacted or numbers that have contacted you is often times very useful. So, we want to make that happen. At your convenience, I'd recommend contacting our prepaid department directly at 888-294-6804. While prepaid won't be able to verbally provide you with your request due to privacy policy, prepaid can definitely come up with a course of action to suit your needs.
    Evan_VZW
    Please follow us on twitter @VZWSupport

  • How can I see the numbers of lines selected in a Multiple Selection Box?

    Hi everybody,
    what I want to do is to get in an array of numbers all the lines selected.
    For instance, if I select the rows 1,4 and 7 from a Multiple Selection Box
    of 10 rows in total, how can I see that array when the rows 1,4 and 7 are
    selected?
    Because I want to connect this numbers to Case Structure and if the only
    rows selected are 1,4 and 7, the Case Structure will only realize this cases,
    and the rest will be ignored.
    I'm sure there is some way to get what I want.
    Thank you for your helpful.

    THANK YOU VERY MUCH. IT WORKS PERFECTLY!!!
    "Dennis Knutson" wrote:
    >>If you just wire the list box to an array indicator, you will see that
    the>output is an array of the selected items. Auto index the array through
    a>for loop that has your case statement inside.>>Dennis Knutson>>"Carlos
    Jorge" wrote>>Hi everybody,>>what I want to do is to
    get in an array of numbers all the>lines selected.>For instance, if I select
    the rows 1,4 and 7 from a Multiple>Selection Box>of 10 rows in total, how
    can I see that array when the rows>1,4 and 7 are>selected?>>Because I want
    to connect this numbers to Case Structure>and if the only>rows selected are
    1,4 and 7, the Case Structure will only>realize this cases,>and
    the rest
    will be ignored.>>I'm sure there is some>way to get what I want.>>Thank you
    for your helpful.>>

Maybe you are looking for