How do i unlock my i pod from being disabled?

i have a i pod that changed the code on me or something happened and when i tried getting in it disabled and told me to connect to i tunes but i tunes isnt helping me. probably cause i dont know how to do this!!! please someone help

Hello bryanna M
Check out the article below to restore your iPod Touch to get it passed being disabled. You will need to put it in recovery-mode and restore in iTunes.
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
Regards,
-Norm G.

Similar Messages

How do you get your Apple ID unlocked from being disabled for security reasons?

How to get your apple account back from being disabled for security reason , I've reset my passcode many times and it still hasn't let me update any of my apps on my phone !

Hello there, Chrissysanders17.
It sounds like you're receiving the message “This Apple ID has been disabled for security reasons” when trying to update apps on your iPhone. The following Knowledge Base article reviews steps for resolving the situation:
If your Apple ID has been locked - Apple Support
If you've already performed the steps mentioned here, then this recommendation may be practical in your case:
If you can't reset your password and you don't use two-step verification, contact Apple Support.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

HT4113 how can i unlock mi i pod i change computer and i cant unlock it because i cant restore it what can i do to unlock it

how can i unlock mi i pod ? i change i compute i usualy use to unlock my i pod but sisnce i chage mycomputer my new computer wont unlock it how can i unlock it ?

Mespain wrote:
... i chage mycomputer my new computer wont unlock it ...
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766

How do i unlock an ipod touch from putting the password in too many times?

How do I unlock an iPod touch from putting the password in too many times?

Restore...
From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.

HT5554 How do I unlock my iphone 3 from att

Hi How do I unlock my iphone 3 from ATT

Here are the eligibility requirements http://www.att.com/esupport/article.jsp?sid=KB414532&cv=820#fbid=6d7EKuCF_dr

How can I unlock my iPhone 4S from orange

How can I unlock my iPhone 4S from orange my contract is finished
And I want to unlock it ASAP so my daughter can have it

You would have to contact Orange and ask if they offer this service and if you qualify.

How can I prevent a PDF file from being copied, printed or downloaded? Students should only be able to view the text and and not distribute it in any way.

How can I prevent a PDF file from being copied, printed or downloaded? Students should only be able to view the text and and not distribute it in any way.

You can prevent it from being printed by applying a security policy to it
in Acrobat. The rest can't be prevented, unless you spend a LOT of money
on DRM protection.

How can I stop music and movies from being automatically deleted from my phone and saved on the cloud? I've just tried to watch a movie on my 2 hour commute, but yet AGAIN it has been removed. I do NOT want to spank all of my data allowance

How can I stop music and movies from being automatically deleted from my phone and saved on the cloud? I've just tried to watch a movie on my 2 hour commute, but yet AGAIN it has been removed. I do NOT want to spank all of my data allowance downloading it again, especially because (believe it or not) I added it to my phone because that's precisely where I wanted it!! Any help much appreciated

FYI I had to put this link into firefox to reply - because **** back safari just wouldn't register my clicks to any of the links on the post... Despite reloadeing and even restarting my computer. Totally annoying and a massive pain in the ***.
But in terms of my initial query; thanks for responding. But no, this is NOT the cause of the problem. I have auto sync and sync over wifi activated, but have also selected manually manage music and videos. Plus, all of my music and videos are on my macbook, absolutely all of it, so if it my phone was syncing with my macbook everything would still be on the phone. Life would be peachy if my phone jsut copied everything that was on my macbook, but unfortuantely it keeps deleting tracks for no apparent reason.
Any thoughts greatly welcomed, because at the moment i can only conclude that my iphone is crap.

Does anyone know of a VI or how to go about writing one that will prevent the computers time/date from being disabled while an application is running.

Does anyone know of a VI or how to go about writing one that will prevent the computers clock/time from being disabled while an application is running. The time and date can normally be reset while an application is running by clicking on the time/date in the lower right-hand corner of the computer screen. I have an application that runs over several days and it is critical that the time and date of the computer not be changed. Is there an easy way to lock this out from the user? Note that I am what I consider an advanced beginner in LV.
Thank you,
Chuck
Solved!
Go to Solution.

That is not something you can do from LabVIEW, as it is an operating system operation, and it will depend on the operating system that you're using. On Windows you can use a group policy to control this. Please Google on "prevent time and date change in windows".
Also, please try to refrain from stuffing your entire message in the subject block. Keep the subject short, but descriptive enough so it can be understood what you are basically asking. Thanks.

How do I hange my new tab from being yahoo searh to google search? I have this changed in IE 8 and works fine. I have removed Yahoo as a search engine in firefox but a new tab is still yahoo. How do I change this?

How do I change my new tab from being yahoo search to google search? I have this changed in IE 8 and works fine. I have removed Yahoo as a search engine in firefox but a new tab is still yahoo. How do I change this using firefox 8

Open Firefox -> Go to View -> Toolbars -> Chechmark on "Navigation Toolbar"
this will bring back your address bar (where you type links to go to websites :P )

How can I EXCLUDE particular folders/files from being included in the Lightroom 5 catalog?

How can I EXCLUDE particular folders/files from being included in the Lightroom 5 catalog?
I want to be able to specify paths and/or filename patterns that should NEVER be indexed in the catalog: not that they don't show up under certain circumstances, just that they are NOT THERE (in the catalog) to begin with!!
I also do NOT want to have to respecify these criteria when "synching" the catalog; criteria should be PERMANENT (or at least 'til they're changed in LR preferences).
I cannot be the only person in the world with this problem--but it sure seems like it, because I've spent an inordinate amount of time doing online searches & I can't find anything that addresses this issue.
Can anyone PLEASE HELP me?
BTW, Adobe employees (if there are any of you out there), I'm simply trying out LR now. If I can't get this (seemingly fundamental) thing worked out (with relatively little effort), Adobe is going to LOSE A SALE of LR, because it's useless to me without this feature.
Thanks,
-t

Thanks for the info... but how to you TELL LR to EXCLUDE images in a particular directory/directory structure? The intuitive place to indicate this would be a right-click on the folder itself (or particular images), but no such option exists.. "???" Thanks again, -pt
The same way that you avoid buying things in your local convenience store. You don't stick a lot of labels on certain shelves, slap a credit card down on the counter each week, and announce you are buying everything that doesn't have a label on its shelf. You just choose the things you want to buy.
Your mention of "synching the catalog" suggests that you are expecting the LR library, to mirror the total images in the computer by default. This is not IMO a useful way to think about it. LR contains no images at all, by default: the Catalog starts out empty.
Then you Add just those selected images that you want to import, among those already in the computer. That's a one-off process which is IMO best achieved controllably in batches - which you can keyword and otherwise organise in LR terms as you go. For new incoming images, ongoing, it is a question of Copying, Moving or Adding these in defined batches as they occur - from the relevant location only - there is no need to re-consider the import of a wider body of images. And one would not want to repeat that whole task anyway: one's prior investment in achieving the right selectivity, has a positive value.
RP

HT4623 how do i get my phone from being disabled

my daughter locked her phone up how do i get is back on from saying disabled?

Do as the manual says and restore the iphone.

How do I stop all outgoing mail from being stored in my sent folder?

How do I stop all outgoing mail from being stored in my sent folder?

You cannot, but you can delete the mail in your Sent folder.

How to strongly protect the step types from being modified by others?

how to strongly protect the step types from being modified by others?

Hi Jacky,
You can make a property of a step uneditable by changing the property
flags for the step. First, you want to be able to view the hidden
properties so that you can change the flags for these properties as
well. You do this by going to Configure>>Station Options
and selecting the Preferences tab. Check the box for Show Hidden
Properties. Once you have done this you can select the step type
from the types palette. In the window to the left, you can expand
the tree for the type to see all the properties of that step.
Right click on the property that you do not want users to be able to
edit, select Properties. Then click the Advanced button.
Here you will see a list of the setable flags. Check the box for
PropFlag_NonEditable. You can then do this for all the properties
of the step that you do not want users to edit.
Thanks,
Caroline Tipton
Data Management Product Manager
National Instruments

How can I unlock my hp15 laptop? System disabled

How can I unlock my hp15 laptop? System disabled code 92861218. This is the message we get after it tells us our password is invalid.

Enter 23749838 REO I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damage that may arise to your system by using these services. Please be aware that you do this at your own risk.

How do i unlock my i pod from being disabled?

Similar Messages

Maybe you are looking for