How do I unmute the audio on a clip in Imovie trailer.

I am using a Mac Book Pro brand new 2014. I am using the latest version of Imovie and I am creating a trailer. I have tried to un-mute the clip from the volume icon on the clip and through the modify menu. I have when into the "adjust" menu but the audio is not available to edit. It seems to be random. It doesn't happen with all clips I have added.

Me too...
https://discussions.apple.com/message/11566189#11566189

Similar Messages

How do you overlay the audio from a clip over a iphoto slideshow clip ?

How do you overlay the audio from a clip over a iphoto slideshow clip ?
I want the audio from a video clip to be playing over the jpg/slideshow iphoto images ...so you see the slideshow elements but do not see the clip but do here the audio !
thanks ! HELP!

How do you overlay the audio from a clip over a iphoto slideshow clip ?
"Command-Shift-Drag" the Event clip containing the audio you wish to extract and "pin" it to the slideshow already in the Project window.

How can I change the duration for all clips in iMovie 10.2

How can I change the duration for all clips in iMovie 10.2? I'm used to working in the older version of iMovie where all I had to do was click on the gear on the clip and change the duration. ALso could use the tool bar to set the duration for all clips. Can't figure out how to do that in this new version. Any suggestions would be appreciated.

In the timeline select the clip whose duration you want to change. Click the adjust button at the top of the viewer and then click the i button and you can set the duration. For multiple clips select them all and in the i button type in the duration you want and it will be applied to all the selected clips. You can also change the duration of a clip in the timeline by putting the cursor over the beginning or end of a clip and dragging. A popup will show the new duration.

How do I use just the audio from a clip in imovie? No picture, no video, just audio!

I want to put the audio from a clip at the end of the video. No video, just black screen

It will require a bit of a workaround. But it can be done. If you enable Advanced Tools under the iMovie Preferences (Go to the iMovie Menu > Preferences). Enable Advanced Tools by clicking the checkbox.
Now create a title with a black background by dragging at title to the end of the video on the Project timeline. Once the title is there, delete all the text on the title. Now drag that black background directly dead center onto the video clip just before the end where you want to 'blot out' the video and just have audio. When you release the mouse, you will be shown a pop-up menu with a bunch of different options including one titled cut-away. Choose this option. What will happen is the video will cut to the black video background you dragged on top of the video clip. You can set the duration by dragging the left and right edges out further to make it run longer. This black back ground effectively cover the video and will continue to play the audio of the underlying video clip.

How do I put the audio from one clip over the video of another clip?

So I have two videos, and I want to replace the audio of the first with the audio of the second. Sorry, I'm new to 08 and have been trying to suss this out for ages so I'd really appreciate any advice you guys can give.

This thread seems to be on the same subject and is very helpful.
http://discussions.apple.com/thread.jspa?threadID=2072620&tstart=50
The Working with Audio clip also included the solution for extracting the audio from a clip at the very end of the video. Having to know the secret handshake of shift-command and dragging is really not intuitive, but such is progress....

How do I have the audio of a clip play underneath a black title page?

I have a project where I am asking a couple the same question seperately. I have a black title page that writes out the interviewer's question for 2 seconds, but while the title page is displayed, I would like to hear interviewer asking the question (without seeing the footage). How do I place a black title page in front of a clip so only the audio plays while the title page is running?
THANK YOU!

The simplest way would be to
0) In iMovie/Preferences make sure that the Advanced Tools are enabled.
1) Add your tite to the movie.
2) Find the event clip that contains the audio and select the portion that you need. Drag it to the project and drop it on the Title. A pop-up menu should appear. Choose "Audio Only".
There are other ways as well if this does not work for you.

How do I fix the audio dropouts and clipping/clicking since upgrading to Mavericks?

Since I upgraded to Mavericks on both my MacBook Pro (15" Mid 2010) and my Mac Pro (2 x 2.26 GHz Quad-Core Intel Xeon, Early 2009), I've been getting various audio playback issues.
Randomly, I can be on a website like YouTube or Vimeo, or using software like Ableton or iTunes, or even just Quicktime, and the audio starts struggling and clicking/popping.
Considering I'm an audio engineer by trade, this is more than a little annoying. A restart seems to temporarily fix it, but it can happen hours or even minutes later.
Anyone else having this issue? Is there a fix?

I'm having this problems too on my audio interfaces, it's soooooooo really really ultra annoying... gosh, if just i'm not installing this horrible Mavericks update. PLEASE APPLE DO SOMETHING ABOUT THIS!!!

How do I use just the audio from a clip without the video?

Can't remember how to use just the audio from a clip, without the video. FCP X can't select like FCP&

Edit just the audio into the timline.
The disclosure triangle next to the edit buttons.

How do I prevent the audio mixer from muting output on windows startup?

I bought the HS-1200 headset some time ago and it's almost the perfect headset if it weren't for a few annoying things.The most annoying thing is that the microphone is way to soft and during online gaming, my team mates can hardly hear me. I never had that problem with my previous headsets. Apparently, Creative is aware of the problem and they have tried to solve it with a driver update - which did not help at all (for most people) since IMO this is a hardware issue. So I don't expect to see that problem solved ever.
But another annoying problem I have - which I do think can be solved quite easily (but I don't know how, which is why I'm asking here) - is that since I installed the HS-1200, my audio's output is always muted when I start up Windows. So I always have to start the mixer (by double clicking the speaker icon in the systray) and unmute the audio. Audio will stay unmuted till the next Windows session at which time it will be muted again.
Any way to prevent this?
Thanks in advance.

Thank you very much. I found it with Tools as the starting point, then found the warn me message in Advanced and, unclicked it as you said.
I'm hoping it will work but my guess is that I'll have to reboot or at least close and restart the browser.
Thanks again!

How can i detach the video from a clip so i can only use the audio when using imovie?

how can i detach the video from a clip so i can only use the audio when using imovie?

First, go to iMovie/Preferences and enable the Advanced Tools.
Import the video clip into an iMovie Event. When you get ready to use it in an iMovie Project, select the clip in the Event and drag & drop it on top of a video or photo clip in the project at the place where you want it to begin. When the pop-up menu appears, choose Audio Only.

How can I add the audio content cd after logic finished installing ?

There was an eror installing the Audio Content CD 1 and I did not notice. Everything else installed properly, Audio Content CD 2, Jam Pack, but how can I add the Audio Content CD1 after Logic has finished installing?
If you can help me please be very specific as to how to do it so that I can follow the directions properly.
Please help me.
Thanks

Hi
You could re-run the installer, or, once you have updated to Logic 9.1.8 you could use the "Download Additional Content" function in the Logic Pro menu. It will tell you what is installed and what is incomplete.
CCT

How do you know the audio level of a keyframes

I'm varying the audio levels of clips on the timeline by creating keyframes using the pen tool. I create four points:
1) -inf = beginning of fade-in
2) -5dB = end of fade-in
3) -5db = beginning of fade-out
4) -inf = end of fade-out
But when I'm going back to adjust points, how do I know what level they're at already without having to drag them away from their home position and then back?
Scrolling over them with the mouse (and not clicking) just gives me a crosshair and no info.
I want to make sure that points 2&3 are at the same level, so I can just move the envelope region between them up and down to change the volume. Any quick way to do this to speed up my process?

T-Bob wrote:
I want to make sure that points 2&3 are at the same level, so I can just move the envelope region between them up and down to change the volume. Any quick way to do this to speed up my process?
Specifically to address this point: if you mouse over the audio levels' rubber band segment BETWEEN your points 2) and 3) until the cursor changes to an up/down adjustment arrow ⬍, and move it up/down, it will adjust BOTH the levels at 2) and 3), maintaining the relative difference between them (or, if points 2) and 3) start at the same level, this adjustment will keep them equal as you drag them both up/down together in one action.)
As usual, much easier to DO it, rather than describe it!

How can i cut the audio from 1 file and put it on another?

I have these2 files of the same movie, 1 is amazing quality but theres no audio. the other is crummy quality but has perfect audio. How can I cut the audio from the good audio version and paste it onto the good video file?
btw i have quicktime pro is that changes anything

Open the movie and press "Command J". This will bring up the properties window. Click on the Audio Track or Video Track and the "Extract/Delete" buttons will light up. Click "Delete" and it'll delete the currently selected track, click "Extract" and it will extract the selected track into a new movie. Just use Delete on the correct track and you're halfway there.
Then, select the movie that is just an Audio Track now, do "Command A" then "Command C" to copy the audio track. Go to the movie that's just a video track, move the insertion point to the beginning of the video then do "Option Command V" to add the Audio Track to the Video Track side by side.

How do I see the audio waveforms in the timeline

How do I see the audio waveforms in the timeline
G5 Mac OS X (10.4.6)

In Sequence Setting (cmd-0) set the "Show Audio waveforms" in the Timeline Options tab.

How do I seperate the audio track from the video and save it to a CD in Premiere Elements 13?

How do I seperate the audio track from the video and save it to a CD in Premiere Elements 13?

Binbashi
You can separate the audio track from video and save it to a DVD disc within Premiere Elements but not a CD disc.
To do save to the audio to DVD disc, you do not have to separate linked audio video, just use the export Publish+Share/Computer/Audio and set Presets to the wanted format (AAC, AIFF, MP3, or Windows Waveform (WAV).
You will not see Audio in the choices since it is at the bottom of the list of choices under Publish+Share/Computer/. You will need to use the thin scroll bar to the right of the choices to scroll to it.
If you need information on selective export of Timeline content when dealing with more than just this one file on the Timeline, please let us know. If you are trying to produce a CD for listening in car or CD player elsewhere, please let us know.
Looking forward to learning of your results.
Thank you.
ATR

How do I unmute the audio on a clip in Imovie trailer.

Similar Messages

Maybe you are looking for