How do I update the built in weather app on my itouch?

Cant get the hourly update as an option. Have the weather channel app loaded but wanted to get the itouch weather app to work like the one on my iphone which gives hourly updates.
Thanks!

The only away to update an app that comes with the iOS is to update the iOS.

Similar Messages

Z10 - How to make the built in Photo app see photos on the SD Ram

Hi,
Was using my Z10 for recording video when it reported memory problems.. No problem. I baught it a 64 GIG SD ram to address any memory problems.. Perfect, all photos and videos now go to the SD ram.. BUT.....
Neither the photos nor the videos appear in the lists of content in either the built in Photo application nor the Videos application. To see them I have to go to File Manager and view files stored on the SD ram were they have been recorded as expected and can be seen. Often when you go to see a video or picture in the File Manager to view a photo or video, no thumbnail of the photo is present! instead you get a generic icon that the file is a photo and you have to open it to see what photo or video it is. It isn't until some time after the thumbnails are properly updated. It also puts both photos and videos in the Camera folder on the SD ram instead of the associated folders on the SD.
I was at the telus store while 2 telus reps struggling to find any way to get the photo app or the video app to display the SD ram content. They commented that Blackberry indicates it supports up to 32gig in SD ram but the fact that it is recording and retrieving properly indicates 64 gigs works too at least for this purpose.
The Question: How does one tell the Photo and Video app to display camera data on the SD ram?
Thanks,
The Manx

I've had issues with the 64gb cards also, one worked and another did exactly as you described.
Some users have had to format the 64gb card to FAT32 to make it work.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How can I get the built in apps from iPad 2 to my iPad 1?

How can I get the built in apps from ipad2 to my iPad 1?

Is your iPad 2 running iOS 5.0.1 and your ipad 1 running iOS 4? If this is the case then go through the update process on your iPad 1. All the iPad 2 apps running on iOS 5 that are compatible with the iPad 1 will be put on your iPad 1. Those apps that require a camera will not appear because the iPad 1 does not have a camera.

How do I use the built in microphone on a macbook air?

How do I use the built in microphone on a MacBook air?

Go to System Preferences -> Sound -> Input, then select Built in microphone

How do I update the software on my Airport Express?

Hello everyone,
I have an Airport Extreme base station acting as WDS and an Airport Express station. I recently upgraded the security on the Airport Extreme base station from 128-WEP to WPA (Personal), but I don't know whether I have to do something to the Airport Express base station. It's green light is on. Do I need to do something? Also, how do I update the software in the Express? Whenever I open the Airport Admin Utility, the only thing that comes up on a scan is my Extreme base station. Any advice would be most appreciated.

yes you need to update your Airpost Express. I just went through this last week with two of my Airport Expresses. I updated my Base and my Remote's light was green but was unable to view it in Airport Admin Utility. So this is what I ended up doing and it works great.
First bring the Airport Express you are working on in the same room as your computer......just the ease of seeing what is going on with the Airport Express. Next you need to reset it.....take a paper clip and push in the little button next to the Audio port and hold in 10 seconds. Then unplug the unit wait 10 seconds and plug it back in. wait about 3 minutes and then you will need to use Airport Set Up Assistant. You will need to make sure you have WPA Personal on your Airport Express too.
don't forget to make sure you have the update firmware too.
http://www.apple.com/support/airport/
I hope this helps.....
Powerbook G4 1.67 15", 1 gig ram, 128 vram, 80 gig harddrive Mac OS X (10.4.6) Powermac G3 266 mt, Dell 5150,ibook G4, 1 gig shuffle, epson printers, airport

How do I update the software on my iPad to iOS 6.3.1?

How do I update the software on my iPad to iOS 6.3.1 from iOS 5.1.1?

See the chart below to determine whether you can upgrade your device and what you can upgrade to.
IPhone, iPod Touch, and iPad iOS Compatibility Chart
     Device                                       iOS Verson
iPhone 1                                      iOS 3.1.3
iPhone 3G                                   iOS 4.2.1
iPhone 3GS                                 iOS 6.1.x
iPhone 4                                      iOS 6.1.x
iPhone 4S                                    iOS 6.1.x
iPhone 5                                      iOS 6.1.x
iPod Touch 1                               iOS 3.1.3
iPod Touch 2                               iOS 4.2.1
iPod Touch 3                               iOS 5.1.1
iPod Touch 4                               iOS 6.1.x
iPod Touch 5                               iOS 6.1.x
iPad 1                                          iOS 5.1.1
iPad 2                                          iOS 6.1.x
iPad 3                                          iOS 6.1.x
iPad 4                                          iOS 6.1.x
iPad Mini                                     iOS 6.1.x
=====================================
Select the method most appropriate for your situation. If you are trying to upgrade to iOS 5 or higher, then you will have to connect your device to your computer and open iTunes in order to upgrade.
Upgrading iOS
   1. How to update your iPhone, iPad, or iPod Touch
   2. iPhone Support
   3. iPod Touch Support
   4. iPad Support
     a. Updating Your iOS to Version 6.0.x from iOS 5
          Tap Settings > General > Software Update
     If an update is available there will be an active Update button. If you are current,
     then you will see a gray screen with a message saying your are up to date.
     b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
     c. Resolving update problems
        1. iOS - Unable to update or restore
        2. iOS- Resolving update and restore alert messages

How do i update the software on my ipod touch? i went to settings, then general, but theres no option called software updates.

How do i update the software on my ipod touch? i went to settings, then general, but theres no option called software updates.

You needing to be running iOS 5 or later in order to do a Software Update from the device. To run iOS 5 you need a 3G or 4G iPod Touch. So if you really have a 4G iPod Touch, connect it to iTunes and you should be prompted about an update to its version of iOS.
See here for more information: iOS: How to update your iPhone, iPad, or iPod touch
B-rock

How do I update the software on my ipod touch

How do I update the software on my ipod touch

To update
Connect the iPod to your computer and update via iTunes
iTunes 10 for Windows: Update and restore software on iPod, iPhone, or iPad
A 1G iPod can go to iOS 2.2 via iTunes and iOS 3.1.3 via
Purchasing iOS 3.1 Software Update for iPod touch (1st generation)
A 2G to 4.2.1. Requires iTunes version 10.X. That requires a Mac with OSX 10.5.8 or later. With 1OSX 10.4.11 you can only go to iTunes 9.X which gets you as high as iOS 4.1
A 3G to 5.1.1 Requires iTunes version 10.5 or later
A 4G to 6 Requires iTunes version 10.7 or later. That requires a Mac with OSX 10.6.8 or later
Identifying iPod models

How do i update the software on an iphone 3g as it doesnt have the software update option on it, how do i update the software on an iphone 3g as it doesnt have the software update option on it

how do i update the software on an iphone 3g as it doesnt have the software update option on it, how do i update the software on an iphone 3g as it doesnt have the software update option on it

Hey wemmer
Check out the following article on how to update you iPhone. The section you are looking for is Update your device using iTunes.
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/ht4623
Thanks for using Apple Support Communities.
Regards,
-Norm G.

How do I update the iCloud ID on my phone? I changed my ID on my laptop, but my iphone still has "sign in to iCloud" with the wrong ID and I cant figure out how to change it.

How do I update the iCloud ID on my phone? I changed my ID on my laptop, but my iphone still has "sign in to iCloud" with the wrong ID and I cant figure out how to change it.

I have same question

Family sharing. i have set my wife up on family sharing and each time we try to download a book or an app, we are requested that i update the payment details. I have done this and we still cannot share.. what do i do or how do i update the payment

family sharing. i have set my wife up on family sharing and each time we try to download a book or an app, we are requested that i update the payment details. I have done this and we still cannot share.. what do i do or how do i update the payment details to enable my wife to download

Drrhythm2 wrote:
What's the best solution for this? I
Copy the entire /Music/iTunes/ folder from her old compouter to /Music/ in her account on this new computer.

My old Apple ID is on my iPhone, but this has been transferred to a new Apple ID. The iCloud on my phone is requesting the password for the old Apple ID, but this no longer exists. How do I update the iCloud Apple ID on my iPhone?

My old Apple ID is on my iPhone, but this has been transferred to a new Apple ID. The iCloud on my phone is requesting the password for the old Apple ID, but this no longer exists. How do I update the iCloud Apple ID on my iPhone? When I try to get the old passwork through forgot my password, the reply is that there is no account that exists.

Try the following....
Go to Settings>icloud, scroll to bottom of screen and tap Delete Account. Then log in using a different ID.

How can I use the built-in Isight camera with an external camera (usb/firewire) at the same time?

How can I use the built-in Isight camera and an external video camera at the same time?
I'm wanting to stream over Oovoo/Skype/etc. using 2 cameras.
Thanks

Simple question with a not so simple answer.
(a) If you mean that you want to run multiple apps simultaneously using a different camera with each app, you may encounter computing power limitations. Digital video is processor intensive. The only way to know if your Mac can do this it to try it. If the video does not work together but each app works when it it the only app running, you are likely overloading your Mac's ability to process and/or move all the required data in your data bus. You can get a better indication of whether this is the case by watching your Activity Monitor utility while running the apps you want to use.
(b) If you mean that you want to have more than one compatible camera connected to your Mac simultaneously for ease of changing between video sources, some, but not necessarily all, apps you are using to operate your camera(s) allow you to select between your cameras.
How you select among connected cameras depends on which application you are using. Here is how camera selection works in a few examples:
(1) For iChat, you can choose which iSight you use in the "Camera:" choices bar in iChat > Preferences... > Audio/Video that appears when more than one compatible camera is connected. Although your camera choices will be different, the choices bar will look something similar to the Preferences settings shown here:
If you cannot see the "Camera" choices bar, your Mac is recognizing only one (or none) of your cameras. In that case, consider the suggestions fromhttp://support.apple.com/kb/HT2090 for iSight problems or refer to your other camera's documentation for help.
This particular choices bar solution applies ONLY to iChat. Most other applications also have settings that allow you to choose which camera to use. However, they do not all work the same way.
(2) For instance, iMovie HD's camera choice is NOT set via Preferences. When you have more than one compatible camera connected, iMovie6 HD uses a drop-down menu choice something like this (depending on which version of iMovie you use):
Note: Because I had no built-in iSight connected when I made this example, and because my external iSight was not connected, the drop-down menu showed only "Time Lapse." Because your Mac has a built-in iSight, your built-in iSight would show in the drop-down menu even when no other camera is connected. Connecting an additional Mac compatible webcam should allow you to choose either camera.
Other iMovie versions work slightly differently.
iMovie 9 (from iLife '11) uses a different camera choice button shown in this article:
http://docs.info.apple.com/article.html?path=iMovie/9.0/en/mov39f84285.html
iMovie 8 (from iLife '09) is slightly different as explained in this article:
http://docs.info.apple.com/article.html?path=iMovie/8.0/en/10172.html
In general, you can use your Mac's help for the application in use to find out how to select among more than one connected camera.
(3) Photo Booth in Snow Leopard 10.6.x and later uses the Photo Booth > Camera menu command to select which camera to use.
Note for readers with older Mac OS X: The previous version of Photo Booth that came with Tiger (10.4.x) is such a simple, basic app that it offers no menu selectable choice. Unless your built-in iSight is already occupied as the camera being used by some open application before you launch Photo Booth, Photo Booth will use ONLY your built-in iSight.
However, you can use the trick from ¶ 4 of http://docs.info.apple.com/article.html?artnum=302781 to let Photo Booth use an external camera.
(If you have an external Firewire camera connected, it may be used in preference to any USB webcam. If that is a problem for you, merely disconnect the problem Firewire device.)
(4) For FaceTime, launch the app and click the Video menu item.
If your Mac recognizes more than one connected compatible camera, a "Camera" section listing the cameras from which you can choose will appear there. Clicking on the desired camera name will let you select the one you want as shown in this image from my Mac Pro and LED Cinema Display:
If your Mac recognizes only one compatible camera, the "Camera" section will not appear in the Video menu, but FaceTime will automatically use the connected camera that is recognized by OS X.
(5) I do not use Skype oir Oovoo. For those or other apps, see Help for each app for info on how to select your desired camera.
Message was edited by: EZ Jim

How can I update the thumbnails in the slide panel when a slide has been changed?

When the text in a slide has been changed, how can you update the thumbnail in the slide panel to reflect this change?
We translated slides, but the slides in the slide panel are still in English.
Thanks for your help.

the slides should update automatically as you type
are you using a theme you created yourself, or one you have added for this show?
when you play the show, does the slides show correctly? If they are OK you could still show the presentation.
also what Mac are you using and what graphic crd is installed?

How can we update the last synchronization date and time..on SUP in sccm 2012 R2

Hi,
Can you any one please guide me how can i update the last synchronization date & time in SUP on SCCM2012 r2 , some how its updated as future date and when ever i try to synch the SUP with disconnected WSUS its shows in the wsyncmgr.log
"Wakeup for a polling cycle " and " Wakeupby inbox drop" and "Wakeup by SCF change"
Thanks
Balaji K

You'll probably have to call CSS on this one as this not normal by any means. The messages you noted above are completely normal but if that's all you are seeing then there's an issue.
Have you reviewed wcm.log and wsusctrl.log?
Jason | http://blog.configmgrftw.com | @jasonsandys

How do I update the built in weather app on my itouch?

Similar Messages

Maybe you are looking for