How do I update the installation ISO?
I have new hardware that needs kernel 2.6.25 to boot and I need to install Arch on it.
Let's say that we have the x86_64 2008-03 installation ISO.
How do I update it to include the new kernel 2.6.25?
dolby wrote:neotuli is planning to release new isos as soon as 2.6.25 hits core, or on April 30th. Whichever comes first.
Then let's hope that 2.6.25 hits core before then, as I am going to need it.
Similar Messages
-
When I update my Mac, I get an Installation alert that in order to continue installation, i need to close iTunes. How do I stop the installation and how do I close iTunes?
That sounds like the latest iTunes Version 11.1.5 update.
To continue the installation you must first Quit iTunes.
To Quit iTunes, use
or -
How do u get the installation alert to go away so that the update installation can continue
i just tried to update my macbook pro and the intallation alert came up and said i had to close the following appilcation they were already closed before the alert came up. so how do u make the installation alert go away so that the update can continue
Welcome to the Apple Support Communities
If these updates aren't installing, restart the Mac and install updates again -
I have loaded all my music to the cloud from my hard drive. When I am viewing the music on my PC from the cloud it wasn't displaying all of the song/artist information correctly. I took the time to go into each one that wasn't displaying correctly using the "get info" option and I updated them all. Now they are displaying properly on my PC but not on my Iphone. I'm sure it was because of the way they were loaded. My question is how do I update the information for the music that is on the cloud so it will display to my Iphone correctly (and the Ipad I just bought but haven't setup yet?
Pretty sure I just downloaded the .exe files to the SD card (I have a directory called "drivers" there & ran from Windows, no need to boot from anything else. Didn't even need to use Safe Boot. The files do need an .exe extension IE someimes downloads as _exe. No idea why but would just need to rename if download has the underscore and not the period. The you can run them.
Was so easy I really did not think about it. One of the Intel Platform drives does say "requires 1.60 update" so that is the one you need. Do the 1.60, reboot, and then the Intel update.
Key point is the release note on the Intel Platform Installer
"Release Notes
1.Please install the Windows BIOS version 1.60 or higher for Encore WT8-A (PDW09x) before installing this Intel Platform Installer update." note this says "BIOS" and not "USB BIOS" which is a smaller file. -
T-Code: Mass to Update the Installation Object?
T-Code: Mass to Update the Installation Object?
When using the TCode Mass I do not see an object listed for the installation.
Does anyone know how to add it? Could we go to the enhancements for SAPMMSDL and add installation?
I did not find any user exits for the package MASS.
Any advice or guidance please?
I found and read the Cookbook, Mass Changes in IS-U.
It tells me about mass changes but is any of this available in the TCODE: MASS?
To put my request in context a bit. I wanted to update EANL and set the field ABLESARTST in MASS for 30k installations.Hi James,
You can also develop a custom program using the FMs ISU_S_INSTLN_PROVIDE and ISU_S_INSTLN_CHANGE.
You need to first calling FM "ISU_S_INSTLN_PROVIDE" to get the auto object. Then update the field y_auto-data-ABLESARTST. And call FM "ISU_S_INSTLN_CHANGE" to pass back the data to the system.
Hope it helps...
Thanks,
Amlan -
If record is in application server how do u update the single table
hi
could anybody tel me
if record is in application server how do u update the single table
by using direct input methodIf your Flash player/plugin is older, the only way is to go to Adobe's site (use Limnos' link) and download the full installer. A .DMG file, which you doubleclick to have it mount on the desktop. Inside is the Flash installer app you doubleclick to run and have it upgrade all. Will need an Admin user account.
After you've upgraded to the latest & greatest, currently 11.5.502.110, a Flash perfpane will show up in System Preferences, where you can set it to auto-update itself, warn you of new updates or manually check for same. -
When i d.load system update - the installation stops b/c of 2 programs:MS Database Daemon
Hi. Everytime i try to install an update - the installation template says that 2 programs still running: Microsoft Database Daemon.app & SyncServicesAgent.app and i cant find how to close these 2 applications... Thxs!
You ran a defective third-party "utility" such as "CleanMyMac" or "MacCleanse" that purports to "clean up" "junk" files. What it really does is to corrupt the operating system and many applications.
The first thing you need to do is remove that software according to the developer's instructions. Never install it, or anything like it, again. Then see below.
If you don't already have a current backup, back up all data. There are ways to back up a computer that isn't fully functional. Ask if you need guidance. You can skip this step if you don't care about the data that hasn't been backed up.
Reinstall the OS.* Your data should be unaffected unless something goes wrong. If the system was upgraded from an older version of OS X, you may need the Apple ID and password you used.
If you use FileVault 2, then before running the Installer you must launch Disk Utility and select the icon of the FileVault startup volume ("Macintosh HD," unless you gave it a different name.) It will be nested below another icon with the same name. Click the Unlock button in the toolbar and enter your login password when prompted. Then quit Disk Utility to be returned to the main Recovery screen.
If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. The same goes for Xcode. All other data will be preserved.
*The linked support article refers to OS X 10.9 ("Mavericks"), but the procedure is the same for OS X 10.7 ("Lion") and later. -
How do you update the recovery partition to 10.8.2 instead of 10.8.1
I installed MT 10.8.1 and then I updated to 10.8.2 how do I updated the recovery partition to the latest release?
If the recovery partition needed updating, it would have been updated with the update.
The OS installer isn't on the Recovery HD, if that is what you are thinking. -
How do I update the software on my Airport Express?
Hello everyone,
I have an Airport Extreme base station acting as WDS and an Airport Express station. I recently upgraded the security on the Airport Extreme base station from 128-WEP to WPA (Personal), but I don't know whether I have to do something to the Airport Express base station. It's green light is on. Do I need to do something? Also, how do I update the software in the Express? Whenever I open the Airport Admin Utility, the only thing that comes up on a scan is my Extreme base station. Any advice would be most appreciated.yes you need to update your Airpost Express. I just went through this last week with two of my Airport Expresses. I updated my Base and my Remote's light was green but was unable to view it in Airport Admin Utility. So this is what I ended up doing and it works great.
First bring the Airport Express you are working on in the same room as your computer......just the ease of seeing what is going on with the Airport Express. Next you need to reset it.....take a paper clip and push in the little button next to the Audio port and hold in 10 seconds. Then unplug the unit wait 10 seconds and plug it back in. wait about 3 minutes and then you will need to use Airport Set Up Assistant. You will need to make sure you have WPA Personal on your Airport Express too.
don't forget to make sure you have the update firmware too.
http://www.apple.com/support/airport/
I hope this helps.....
Powerbook G4 1.67 15", 1 gig ram, 128 vram, 80 gig harddrive Mac OS X (10.4.6) Powermac G3 266 mt, Dell 5150,ibook G4, 1 gig shuffle, epson printers, airport -
How do I update the software on my iPad to iOS 6.3.1?
How do I update the software on my iPad to iOS 6.3.1 from iOS 5.1.1?
See the chart below to determine whether you can upgrade your device and what you can upgrade to.
IPhone, iPod Touch, and iPad iOS Compatibility Chart
Device iOS Verson
iPhone 1 iOS 3.1.3
iPhone 3G iOS 4.2.1
iPhone 3GS iOS 6.1.x
iPhone 4 iOS 6.1.x
iPhone 4S iOS 6.1.x
iPhone 5 iOS 6.1.x
iPod Touch 1 iOS 3.1.3
iPod Touch 2 iOS 4.2.1
iPod Touch 3 iOS 5.1.1
iPod Touch 4 iOS 6.1.x
iPod Touch 5 iOS 6.1.x
iPad 1 iOS 5.1.1
iPad 2 iOS 6.1.x
iPad 3 iOS 6.1.x
iPad 4 iOS 6.1.x
iPad Mini iOS 6.1.x
=====================================
Select the method most appropriate for your situation. If you are trying to upgrade to iOS 5 or higher, then you will have to connect your device to your computer and open iTunes in order to upgrade.
Upgrading iOS
1. How to update your iPhone, iPad, or iPod Touch
2. iPhone Support
3. iPod Touch Support
4. iPad Support
a. Updating Your iOS to Version 6.0.x from iOS 5
Tap Settings > General > Software Update
If an update is available there will be an active Update button. If you are current,
then you will see a gray screen with a message saying your are up to date.
b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
c. Resolving update problems
1. iOS - Unable to update or restore
2. iOS- Resolving update and restore alert messages -
How do i update the software on my ipod touch? i went to settings, then general, but theres no option called software updates.
You needing to be running iOS 5 or later in order to do a Software Update from the device. To run iOS 5 you need a 3G or 4G iPod Touch. So if you really have a 4G iPod Touch, connect it to iTunes and you should be prompted about an update to its version of iOS.
See here for more information: iOS: How to update your iPhone, iPad, or iPod touch
B-rock -
How do I update the software on my ipod touch
How do I update the software on my ipod touch
To update
Connect the iPod to your computer and update via iTunes
iTunes 10 for Windows: Update and restore software on iPod, iPhone, or iPad
A 1G iPod can go to iOS 2.2 via iTunes and iOS 3.1.3 via
Purchasing iOS 3.1 Software Update for iPod touch (1st generation)
A 2G to 4.2.1. Requires iTunes version 10.X. That requires a Mac with OSX 10.5.8 or later. With 1OSX 10.4.11 you can only go to iTunes 9.X which gets you as high as iOS 4.1
A 3G to 5.1.1 Requires iTunes version 10.5 or later
A 4G to 6 Requires iTunes version 10.7 or later. That requires a Mac with OSX 10.6.8 or later
Identifying iPod models -
how do i update the software on an iphone 3g as it doesnt have the software update option on it, how do i update the software on an iphone 3g as it doesnt have the software update option on it
Hey wemmer
Check out the following article on how to update you iPhone. The section you are looking for is Update your device using iTunes.
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/ht4623
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
How do I update the iCloud ID on my phone? I changed my ID on my laptop, but my iphone still has "sign in to iCloud" with the wrong ID and I cant figure out how to change it.
I have same question
-
family sharing. i have set my wife up on family sharing and each time we try to download a book or an app, we are requested that i update the payment details. I have done this and we still cannot share.. what do i do or how do i update the payment details to enable my wife to download
Drrhythm2 wrote:
What's the best solution for this? I
Copy the entire /Music/iTunes/ folder from her old compouter to /Music/ in her account on this new computer.
Maybe you are looking for
-
how do I stop individual emails from this forum
-
Hi all, Just experienced that the search function does not work for customer ref number in cockpit. Any experience or help. Thanks
-
Error message when compiling WinHelp 2000
Hello, I'm working a project in RoboHelp X5 using WinHelp 2000 to create context-sensitive help. I have been working on this project for about a week now, and just this afternoon started getting an error whenever I attempted to compile. The error pop
-
Serious problem with the Info Palette
Pr CS5.5 Mac: One minute AV clip in the timeline. At the head of the clip, Info Palette reports that Audio and Video time-code are the same; the clip is in sync. But, one minute into the clip, it's OUT OF SYNC by two frames!!! IOW, the time-code i
-
Bad allocation in paragraph formatting
Hi, In some circonstancies, where is a bad allocation for the text of the paragraph. this program highlight the problem by drawing the insideAllocation. The text must be inside the allocation rectangle but it's not always the case. import java.awt.*;