How do I upgrade an OSX leopard macmini to snow leopard - I have cd and CPU ready to go, but don't see an upgrade choice.

I have a macmini running Leopard. I need to upgrade it to Snow Leopard. I have my Snow Leopard in hand, but can't an upgrade choice anywhere. I rebooted holding down the c key - I thought this was the magic key for rebooting to bring up other options but no luck.
Once on Snow Leopard, I have the App Store purchased Lion to upgrade to, which is where I want to get this machine.
Can someone show me the error of my ways, please?

Wow that was a fast reply with a great answer!
So I just follow the bouncing ball as if it were a clean install and it knows to do only an upgrade? I'm only double checking because even though I actually made a new fresh backup.
Thanks very much for the help!
Mike

Similar Messages

How do I erase my hard drive? My initial operating system was Snow Leopard but I have upgraded to Mavericks OS. My Snow Leopard install disk ejects when I try and use it.

How do I erase my hard drive? My initial operating system was Snow Leopard but I have upgraded to Mavericks OS. My Snow Leopard install disk ejects when I try and use it.

Do a backup, preferable 2 separate ones on 2 drives. Boot to the Recovery Volume (command - R on a restart or hold down the option/alt key during a restart and select Recovery Volume). Run Disk Utility Verify/Repair and Repair Permissions until you get no errors. Reformat the drive using Disk Utility/Erase Mac OS Extended (Journaled), then click the Option button and select GUID. Then re-install the OS.
OS X Recovery
OS X Recovery (2)
When you reboot, use Setup Assistant to restore your data.

How do I transfer Notes from my Outlook Mac 2011 to my iPhone 4S (iOS 6)? I am using OSX 10.6.8 Snow Leopard on a MacBook Pro

Hi,
I want to know how I can transfer Notes in my Outlook: Mac 2011 to my iPhone 4S.
Am using a Macbook Pro with OSX 10.6.8 Snow Leopard and my 4S is on iOS 6.
Jesal

Finally figured it out...
1) Open mail/compose notes on your macbook...
2) copy and paste every note from Outlook to a new note in Mail.
3) Open iTunes. In Info/Advanced tick Notes. This will replace / copy all Notes from Mail to your iPhone...
4) Voila! Notes are on iPhone...
I must say in spite of all the fabulous advantages of a Macbook and an iPhone, syncing really does suck...
Transferring data from another smartphone to a Mac or an iPhone is tough...
Features like "one way / two way" sync for Phone / computer or allowing us to select which whose, phone or computer, will be considered more important so that you can choose whose data will overwrite the other, are not there in iTunes... This is something which really needs to be there...
Anyways... problem solved for now...
ciao...
Jesal

I have upgraded my software to OS X Snow Leopard. Now I want to update that to Lion. How do I do that? When I look at the Lion software available for download on the apple site it all seems to be update software for people already a version of Lion.

I have upgraded my software to OS X Snow Leopard. Now I want to update that to Lion. How do I do that? When I look at the Lion software available for download on the apple site it all seems to be update software for people already a version of Lion.

It has to be 10.6.8 I believe, before you can upgrade to Lion. I found some more info, please check out: http://www.informationweek.com/byte/howto/personal-tech/desktop-os/231001728
Be sure all your programms will work on Lion. Power PC programms do not work anymore (eg Nikon Scan 4 will not work from now on on Mac OS X). Some versions of Canon utilities for camera's do not work, Canon still have to upgrade. For an App Compatibility Table: http://roaringapps.com/apps:table

I currently have OS X Leopard on a macbook. No where in the entire currently that I live stocks Snow Leopard in order to upgrade. So can anyone tell me how I am supposed to upgrade to Lion without access to Snow Leopard? arrrrgg! Thanks

I currently have OS X Leopard on a macbook. No where in the entire country that I live stocks Snow Leopard in order to upgrade. So can anyone tell me how I am supposed to upgrade to Lion without access to Snow Leopard first? arrrrgg! Thanks

If by "posted to you" you mean shipped, yes. Usually UPS or FedEx is used by Apple. Note that you may need to access the Online Store that's for your country. If you are not in the US then you cannot purchase it for shipment outside of the US. You can use this link to find the store that serves your country: Change Country. You will find it at the bottom of the Online Store page.

I installed OSX server 10.6 snow leopard on my IMAC, but still have choppy videos. can anyone tell me how to fix the problem

I installed OSX server 10.6 snow leopard on my IMAC, but still have choppy videos. can anyone tell me how to fix the problem

By your use of "still", did this problem exist before OS X Server was installed? OS X Server itself has no particular linkages to video processing, beyond what OS X client provides.
Some details on the configuration might be useful. Are these videos you're having issues with stored locally in files, or are these videos received over the network and played? If the videos are local, have you tried playing the videos from a different disk? If the video files are remote, can you download the videos and play them as a test?
What software are you using to play the videos? QuickTime? QuickTime X? Does using VLC or another player work better? There are some discussions of choppy videos around the forums, too.

I just bought a used computer with OSX 10.8 and want to reinstall OSX 10.6.3 Snow Leopard . . . How can I do this?

I just bought a used computer with OSX 10.8 and want to reinstall OSX 10.6.3 Snow Leopard . . . How can I do this?

Alfi94965 wrote:
I just bought a used computer with OSX 10.8 and want to reinstall OSX 10.6.3 Snow Leopard
First off you need to know the model identifier of the machine, not all Mac's can be reverted to Snow Leopard and not all Mac's can use the 10.6.3 Retail disk!
To find the model identifier, boot the machine up and hold the command key and the spacebar, Spotlight appears at the top right corner and type in System Profiler and press Enter/Return.
The model identifier should be something like "MacBook Pro 9,2" or something of that nature.
You also can hold D while the computer is booting on/near a Internet connection for a long time and this loads Hardware Test, which one of the panes will give the required information.
Next you download MacTracker here and look up your machine and it's original operating system.
(Don't click the AppStore version obviously)
http://mactracker.ca/
You may have to right or control click on the program to bypass Apple's Gatekeeper and run the program.
If you have the model identifier and the machine won't boot, then just ask here and we can tell you the information
Now all Intel Mac's issued before July 2011 can install Snow Leopard, but the Mac's released after July 2011 came with OS X 10.7 Lion and the firmware won't boot off the Snow Leopard disk. (however 10.6 can be shoehorned on using Firewire Target Disk Mode and another Mac for some models after July 2011)
Also the 10.6.3 Snow Leopard Retail Disk sold at Apple only works on Mac's that came with 10.4-10.6.2 from the factory.
Any Mac's that originally came with 10.6.3-10.6.8 from the factory need model specific disks from Apple directly, not sold at their online store, you will have to call them with your Mac's serial number and order these disks.
If you get the right disk and have the right machine, then you should be able to insert the disk and hold c down or the option/alt key and boot from the 10.6 disk.
Follow these directions and make sure to erase the ENTIRE DRIVE first in Disk Utility or you will have issues later trying to fix it from the disk.
How to erase and install Snow Leopard 10.6

HT5988 When upgrading my Mac from OS X Snow Leopard, to OS X Mavericks, The installer displayed my parallel and my PC applications. How can i get them back?

When upgrading my Mac from OS X Snow Leopard, to OS X Mavericks, The installer displayed my parallel and my PC applications. How can i get them back?

You either have to restore the Snow Leopard backup you made prior to installing Mavericks, or create a separate Snow Leopard partition to boot to in order to run your older PowerPC applications.
Either that, or upgrade the apps which won't run in Mavericks to newer versions that do.

Upgrade leopard to snow leopard with preexisiting snow leopard time machine backup

I was using an old desktop Mac that had been upgraded to snow leopard from leopard a few years ago. Disk utility said I needed to repair my hard drive using the installation discs. I didn't have the snow leopard installation disc but still had the leopard installation disc which I used. When the computer re-installed leopard onto my hard drive, it created a partition: one with my hard drive running snow leopard, and then a new one with the space left over, running leopard. I got my replacement snow leopard installation discs and would like to delete the leopard partition, and go back to what I had before with the snow leopard drive. I do have a time machine backup (somewhat incomplete) and am making a copy of the physical snow leopard drive. I cannot access the most recent time machine backup since I'm back to running leopard and the time machine backup was made under snow leopard. I'm not sure how to proceed from here to upgrade to snow leopard. When I try to upgrade to snow leopard, I'm asked which destination drive to use. I don't want to use the snow leopard drive, since it would get deleted. So, would the leopard drive be the answer in this case? And what would happen to the contents of my old snow leopard drive? Would I end up with two partitions, both with snow leopard, but one being current (nothing on it) and the other being my old drive? Would I be able to get rid of the current drive and then use only my old drive? Thanks in advance for any help.

First of all, it's unclear to me why you cannot select the old Snow Leopard partition.
I also think you should have been able to repair hard disk using the leopard CD disk without actually installing leopard OSX by using the Utilities only.
Also, Why is your Time Machine backup incomplete? Is that under Leopard or Snow Leopard?
Now you have two partitions with two different OSX (Leopard and Snow Leopard). Your goal is to get back to Snow Leopard.
I going to assume that the original Snow Leopard partition is inoperable (this is also question?) I would upgrade the Leopard partition to Snow Leopard. Afetrwards, use the Migration Assistant to bring in your data, documents, app, and settings. Once complete, you should be able to see your Time Machine backups. If all is ok then you can delete the original Snow Leopard partition.
This is a somewhat complicated situation, so I am issuing a caveat that is my opinion only. Wait until another expert provides input regarding your situation to determine the best course of action.

How to install (using usb flash drive) os x snow leopard on 10.5?

i have a version 10.5 (leopard), but i would like to install snow leopard (10.6). i tried using bootable usb flash drive using the "utility drive". However, it did not quite work as i expected. Does anyone know how to use bootable usb flash drive to install snow leopard on leopard?

How to Install OS X Updates Successfully
A. Repair the Hard Drive and Permissions:
Boot from your current Leopard installer DVD. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
B. Make a Bootable Backup Using Restore Option of Disk Utility:
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
C. Important: Please read before installing:
If you have a FireWire hard drive connected, disconnect it before installing the update unless you will boot from this drive and install the update on it. Reconnect it and turn it back on after installation is complete and you've restarted.
You may experience unexpected results if you have installed third-party system software modifications, or if you have modified the operating system through other means. (This does not apply to normal application software installation.)
The installation process should not be interrupted. If a power outage or other interruption occurs during installation, use the standalone installer (see below) from Apple Downloads to update. While the installation is in progress do not use the computer.
D. To upgrade:
Insert the USB flash drive.
Restart the computer.
Immediately after the chime press and hold down the "OPTION" key.
Release the key when the boot manager screen appears.
Select the icon of the USB flash drive and click on the arrow button below the icon.
When the installer finishes loading follow the onscreen instructions.

I'm trying to upgrade from 10.5.8 to Snow Leopard

I'm trying to upgrade from 10.5.8 to Snow Leopard but keep getting an error message, "This update requires Mac OS X version 10.6.". Isn't Snow Leopard 10.6?....so now what?

It sounds more like you are trying to use an updater rather than the Snow Leopard installer DVD. You might read over the following:
How to Install OS X Updates Successfully
A. Repair the Hard Drive and Permissions:
Boot from your current OS X Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
B. Make a Bootable Backup Using Restore Option of Disk Utility:
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
C. Important: Please read before installing:
If you have a FireWire hard drive connected, disconnect it before installing the update unless you will boot from this drive and install the update on it. Reconnect it and turn it back on after installation is complete and you've restarted.
You may experience unexpected results if you have installed third-party system software modifications, or if you have modified the operating system through other means. (This does not apply to normal application software installation.)
The installation process should not be interrupted. If a power outage or other interruption occurs during installation, use the standalone installer (see below) from Apple Downloads to update. While the installation is in progress do not use the computer.
D. To upgrade:
Purchase the Snow Leopard Retail DVD.
Boot From The OS X Installer Disc:
Insert OS X Installer Disc into the optical drive.
Restart the computer.
Immediately after the chime press and hold down the "C" key.
Release the key when the spinning gear below the dark gray Apple logo appears.
Wait for installer to finish loading.
E. If updating:
Download and install update(s)
Use Software Update, or
Download standalone updater(s).

I recently upgraded to Mavericks from Snow Leopard. Does Snow Leopard still exist on my Mac? If so, is it possible to restart under Snow Leopard in order to run PowerPC apps? If not, is there an OS available in 64 bit that supports PowerPC apps? Mav ***.

I recently upgraded to Mavericks from Snow Leopard. Does Snow Leopard still exist on my Mac? If so, is it possible to restart under Snow Leopard in order to run PowerPC apps? If not, is there an OS available in 64 bit that supports PowerPC apps? Mav ***.

The only reason I upgraded to Mavericks was because my Snow Leopard OS was 32 bit, which I was told would support only 4GB of RAM.
That wasn't quite right. You can put in as much RAM as your Mac's hardware supports. The division is in the apps themselves. A 32 bit app can't use more than 4 GB or RAM. A 64 bit app can use much more.
For example, as a 32 bit only version, Photoshop CS3 can't use more 4GB of RAM, no matter how much you actually have installed. CS4 or later can use all the RAM you want to throw at it.

Upgrade from 10.4.11 to Snow Leopard without Leopard?

I'm trying to upgrade from OS X 10.4.11 to Snow Leopard. (At this point it's been such a headache that I don't even care about Lion.) If I've read correctly, I need to first upgrade to OS X 10.5 Leopard. The only problem is that I can't seem to find it anywhere on the Apple site. I even searched for the Mac Box Set that included Leopard, Snow Leopard, and iLife and can't find it either. I went to an Apple store today and they didn't even Snow Leopard on the shelf. Anyone know how I can get from 10.4.11 to Snow Leopard? Do I still need to go to Leopard first? I tried looking at the requirements/tech specs for the Snow Leopard install disc in the online store, but that link takes me straight to the tech specs for Lion. Any help would be greatly appreciated!

Hello,
If I've read correctly, I need to first upgrade to OS X 10.5 Leopard.
You read correctly, but that info isn't correct, if your Mac can hadle 10.6 then the $29 Disc will install on 10.4.x...
Snow Leopard/10.6.x Requirements...
General requirements
   * Mac computer with an Intel processor
    * 1GB of memory (I say 2GB at least)
    * 5GB of available disk space (I say 30GB at least)
    * DVD drive for installation
    * Some features require a compatible Internet service provider; fees may apply.
    * Some features require Apple’s MobileMe service; fees and terms apply.
Which apps work with Mac OS X 10.6?...
http://snowleopard.wikidot.com/
It looks like they do still have Snow Leopard:
http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA
If it's a core Duo & not a Core2Duo, then it'll only run in 32 bit mode.

It's been a while since I upgraded my system. Is there anything I should do before upgrading from 10.5.8 to Snow Leopard other than backing up my files? The transition should be pretty seamless, right?

It's been a while since I upgraded my operating system. Is there anything I should do before upgrading from 10.5.8 to Snow Leopard other than backing up my files? The transition should be pretty seamless after installation, right?

How to Install OS X Updates Successfully
A. Repair the Hard Drive and Permissions:
Boot from your current Tiger Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Installer menu (Utilities menu for Tiger and later.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
B. Make a Bootable Backup Using Restore Option of Disk Utility:
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
C. Important: Please read before installing:
If you have a FireWire hard drive connected, disconnect it before installing the update unless you will boot from this drive and install the update on it. Reconnect it and turn it back on after installation is complete and you've restarted.
You may experience unexpected results if you have installed third-party system software modifications, or if you have modified the operating system through other means. (This does not apply to normal application software installation.)
The installation process should not be interrupted. If a power outage or other interruption occurs during installation, use the standalone installer (see below) from Apple Downloads to update. While the installation is in progress do not use the computer.
D. To upgrade:
Purchase the Snow Leopard Retail DVD.
Boot From The OS X Installer Disc:
Insert OS X Installer Disc into the optical drive.
Restart the computer.
Immediately after the chime press and hold down the "C" key.
Release the key when the spinning gear below the dark gray Apple logo appears.
Wait for installer to finish loading.
E. If updating:
Download and install update(s)
Use Software Update, or
Download standalone updater(s).

My iPhone 4S no longer syncs after upgrading from 10.5.8 to Snow Leopard 10.6.3

y iPhone 4S no longer syncs after upgrading from 10.5.8 to Snow Leopard 10.6.3 - any solutions out there?

Thanks - got stuck with the upgrade to 10.6.8, but Apple Support was able to navigate me through that, the date settings caused a problem here.

How do I upgrade an OSX leopard macmini to snow leopard - I have cd and CPU ready to go, but don't see an upgrade choice.

Similar Messages

Maybe you are looking for