How do I upload a file and put on a website?

Trying to upload an image to a website that I saved on the ipad2, however, the upload option is greyed out. Is there a way around this?

I don't think that it's possible via a browser - have you checked the app store to see whether the website has got it's own app, or whether there is a third-party app for it ?

Similar Messages

How do I convert AAC files and put them on my SD card

Hello all,
I'm trying to convert some of my itunes track unto my sd card and then play them with my zen. ? The problem is I can't figure out how to get zen media explorer to put the converted files on my sd card. Does anyone know how to overcome this problem? Any help and information is very much appreciated.

daemonvi wrote:
tapdiggity wrote:
Your instructions does not seem to address the issue of putting converted aac files onto the sd card.
Yes, they do. What they don't answer is "How do I configure <insert random media management application> to convert tracks between different audio formats and DIRECTLY store the converted output to the SD card I have installed in my Zen?
Why not? Because it isn't really possible. The internal memory of the Zen and the SD card contents are completely distinct storage areas and are not simultaneously visible to the host computer. You either have the Zen in MTP mode where you can interact with the internal memory or you have the Zen in Removable Disk mode where you can interact with the SD(HC) card. It is an either-or proposition. So you must (a) convert your music files to a location on your host computer, (b) put the Zen into Removable Disk mode, (c) transfer the converted files to the SD card and then (d) restore the Zen to MTP mode (where you can use the Memory Card menu items to browse/play the files).
I suppose I could pull back on the "not possible" part a bit since a stand-alone audio converter should allow you to set a user-specified output folder. As such you could put the Zen into Removable Disk mode first and then configure the converter to send files to the approriate folder on whatever dri've letter the SD card gets mapped to.
Message Edited by daemonvi on 05-8-2009 2:0 PM
I think I want to start with (a), now can I use Zen media explorer to convert the files and place in another location on my computer or I must I download a 3rd party application to do this?

How do i scan a file and put it on the hp computer to be put in an email

I have anHP Envy 114 e-All-in-one printer D411c Windoe 7 64-bit No Error nothing else installed Can't get the printer to scan to computer

racinglady27, Sorry to learn that you are having this issue;
Try this article; Click here
Try this utility it may help find if you issues with the printer GO HERE,
Let me know the outcome I will do my best to assist you.
Hope this helps:
RobertoR
And Remember. . .
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

My mac book pro crashed and the logic board died. They said that i could get the hard drive out and it should have all my files on it. How do i get them off and put them on my new computer?

My mac book pro crashed and the logic board died. They said that i could get the hard drive out and it should have all my files on it. How do i get them off and put them on my new computer?

Mj
Do you mean a case for the external hard drive? See here. Hope this may be helpful to you.
Regards,
Joseph

I have purchased a monthly subscription to Adobe PDF pack so that i can edit a PDF file, i have uploaded the file and its now in "my assets". how do i now edit this file??

I have purchased a monthly subscription to Adobe PDF pack so that i can edit a PDF file, i have uploaded the file and its now in "my assets". how do i now edit this file??

You can't edit a file with PDF Pack, but you should be able to convert it to a Word document, and if you are really lucky edit THAT and make a new PDF. Don't expect too much though!

How to make blank copies of a PDF file and put it into the printer tray.

Dear experts,
Before you try printing the data from the FM, How tomake several blank copies of the PDF file and put it in the printer tray so that you can print just the data from the function module on it??????
Please reply.

Hi drredwood,
When you open your PDF file a yellow bar will appear on the top of the screen.
Click on 'Enable All Features'.
Then you will be able to copy the content from your pdf and to paste in any of the file.
Regards,
Florence

How to make an openfiledialog? (browse a file and put it in a parameter)

How to make an openfiledialog? (browse a file and put it in a parameter)
Best Regards

hi,
check the code below:
FORM sub_gui_download.
* Define local variables
DATA:
    lo_fullpath       TYPE string,
    lo_filename       TYPE string,
    lo_path           TYPE string,
    lo_user_action    TYPE i,
    lo_encoding       TYPE abap_encoding.
* Define local constants
CONSTANTS:
    lc_encoding(1) TYPE c VALUE 'X',
    lc_directory TYPE string VALUE 'D:',
    lc_filetype TYPE char10 VALUE 'DAT',
    lc_separator TYPE char01 VALUE 'X',
    lc_blank TYPE char01 VALUE ''.
* Call method to create dynamic save_path and save_format
CALL METHOD cl_gui_frontend_services=>file_save_dialog
    EXPORTING
      with_encoding        = lc_encoding
      initial_directory    = lc_directory
    CHANGING
      filename             = lo_filename
      path                 = lo_path
      fullpath             = lo_fullpath
      user_action          = lo_user_action
      file_encoding        = lo_encoding
    EXCEPTIONS
      cntl_error           = 1
      error_no_gui         = 2
      not_supported_by_gui = 3
      OTHERS               = 4.
IF sy-subrc <> 0.
    EXIT.
ENDIF.
* Check user_action
IF lo_user_action <> cl_gui_frontend_services=>action_ok.
    EXIT.
ELSE.
*   If user_action equals to action_ok, call function module to download datas
*   using download table i_dwn_tab
    CALL FUNCTION 'GUI_DOWNLOAD'
      EXPORTING
        filename                = lo_fullpath
        filetype                = lc_filetype
        write_field_separator   = lc_separator
        trunc_trailing_blanks   = lc_blank
      TABLES
        data_tab                = i_dwn_tab
      EXCEPTIONS
        file_write_error        = 1
        no_batch                = 2
        gui_refuse_filetransfer = 3
        invalid_type            = 4
        no_authority            = 5
        unknown_error           = 6
        header_not_allowed      = 7
        separator_not_allowed   = 8
        filesize_not_allowed    = 9
        header_too_long         = 10
        dp_error_create         = 11
        dp_error_send           = 12
        dp_error_write          = 13
        unknown_dp_error        = 14
        access_denied           = 15
        dp_out_of_memory        = 16
        disk_full               = 17
        dp_timeout              = 18
        file_not_found          = 19
        dataprovider_exception = 20
        control_flush_error     = 21
        OTHERS                  = 22.
    IF sy-subrc <> 0.
      MESSAGE i007.
    ENDIF.
ENDIF.
ENDFORM.

How to retrive value from SVG and put in XLS(excel) file ?

Hello all,
I ll appreciate you if you help me in this issue,
My Project Manager give me a task of creating a java program to take values from SVG file and put that data into a particular cell.
Can you give me some favourable hints to help in this issue.
Thanks in advance.
Jaison

If by "array format" you mean comma-separated, why not
FOR x IN v_searchResult.FIRST .. v_searchResult.LAST
LOOP
v_id := v_id || TO_CHAR(v_searchResult(i).Product_ID);
END LOOP;or even better....
FOR x IN v_searchResult.FIRST .. v_searchResult.LAST
LOOP
    IF x = v_searchResult.FIRST
    THEN
       v_id TO_CHAR(v_searchResult(x).Product_ID);
    ELSE
       v_id := v_id ||','|| TO_CHAR(v_searchResult(x).Product_ID);
    END IF;
END LOOP;Cheers, APC

How do I process multiple files and turn them from raw to jpeg

How do I process multiple files and turn them from raw to jpeg. Ive tried and it seems to go through the files but doesnt seem to process them or store them in the selected folder

Yes that was the first thing I did. Then I used the process multiple files and selected a new folder to put them in and selected use open files and selected to turn them into jpeg. The images flash on the screen like they are being processed, but the folder never appears in library. Is it possible because there are a couple 16 bit files open that this corrupts the task. Do I need to create the folder first. Will elements not create the folder on its own.
Thanks Vince

Upload unicode file and display content in a textarea

Hi all,
I am trying to do the following;
1. upload a unicode file (file with some non-english characters)
2. after uploading, read the uploaded file and show the content in a textarea in a jsp page.
I use struts in my project. I use class org.apache.struts.upload.FormFile for uploading the file. The upload works fine. I do the upload with help of FormFile's getInputStream method. When i read and display the content in the textarea, the content is displayed junk. But i tried to open the uploaded file, its fine. I mean it is just as my source file. Please help me out for reading the uploaded unicode and displayed in a textarea.
Below is the code that i use to upload the file;
File tempFile = null;
FileOutputStream fos = null;
InputStream is = null;
try {
     tempFile = "c:/ThaiText.txt";
     fos = new FileOutputStream(tempFile);
     is = theFile.getInputStream();
     // Transfer bytes from in to out
     byte[] buf = new byte[1024];
     int len;
     while ((len = is.read(buf)) > 0) {
          fos.write(buf, 0, len);
     logger.info("fileName$$=" + tempFile.getName());
} catch (Exception e) {
        logger.error(e);
     throw e;
} finally {
     closeOutputStream(fos);
}Below is the code that i use for reading the uploaded file's content and store it to a string. I set this string to a form bean's string property.
public static String readContentNonUTF8(String path) {
     FileInputStream fis = null;
     String value = "";
     try {
          fis = new FileInputStream(path);
          byte[] buf = new byte[1024];
          int len;
          while ((len = fis.read(buf)) > 0) {
               String tmp = new String(buf, 0, len);
               value = value.concat(new String(tmp.getBytes()));
     } catch (Exception e) {
          logger.error(e);
     } finally {
          try {
               fis.close();
          } catch (Exception e) {
     return value;
}

Hi,
Thanks for your reply. You meant that both method also can used to upload file and submit data? How about if i want to use the first method to upload file and submit data? How can i upload the file by using first method?

Upload csv file and insert into a table for user

Hello,
i want to create a Page on which, the User of my Application can upload a semicolon delimited file and the data of the file should automatically be stored in a table.
I can upload the file and the file is then stored in the htmldb_application_files table.
But I do not no how to parse the file....
Can anyone help me or is there anyone who have done that before?
Thank you,
Tim

Tim...
Here is what I did in a similar situation.
Let the user download a csv file to use as an excel turnaround document.
I check digit the primary key. They are not supposed to touch that column.
They do their excel thing adding data in columns next to the ones they are updating. They now have the original and new data on the same row in the excel document. They save it on a share drive as a csv. A perl script wakes up and parses the csv. Verify's the check digit, checks that the old values still exist in the table... etc, and then does the update if all is well at the row level. The csv is replaced showing the success or failure of the update on each row.
Probably lots of other ways to accomplish this but I have gotten years of use out of the script. The original csv can come out of almost any application. Mine come from apex, discoverer and some excel queries.
Bob

Reading .txt files and put it into a TextArea

Hi all,
I got a problem! I have to make something like a messenger.
I want to put the written text into a .txt file, after that I have to get the text out of the .txt file and put in into a TextArea.
I would ike it to to that like this:
">User 1
Hello!
>User 2
Hi!
Now here are my questions:
1: What is the moet easy way to do this ?
2: How could i put Enters into a .txt file with Java ?
3: How could i read all the text from the .txt file and put it into a TextArea WITH ENTERS ?
Thanks for your help!
Greetings, Jasper Kouwenberg

use JTextArea.read(new FileReader(fileName)) for reading.
and JTextArea.write(new FileWriter(fileName)) for writing.
The enters should be ok if the user press enter and adds a new line ("\n") to the text area component.
It will save the enter in the text file and load it correctly back to the text area.
If you want to add enter programmatically just add "\n" string to the text area component.

Read from xls file and put it in a table

Hi,
I've an xls file while is having 8 cells with some thousands of rows. i've to write a procedure to read that file and put it in a table(each cell as each column). pls help me how to proceed. i'm using oracle 9i
Regards
Abdul Muthalef

as Gasparotto said, copy the csv file to the database server.
create a directory object on the database.
create directory dir_temp as 'e:\mydir'
grant read, write on directory dir_Temp to <user>
and then map this csv file to the external table using the below syntax.
CREATE TABLE tab_hierarchy
node_id          NUMBER,
parent_id     NUMBER,
description      VARCHAR2(255)
ORGANIZATIOn EXTERNAL
     TYPE ORACLE_LOADER
     DEFAULT DIRECTORY dir_temp
     ACCESS PARAMETERS
     records delimited by newline
     fields terminated by ','
     (node_id,parent_id,description)
     LOCATION ('tree.csv')
PARALLEL
REJECT LIMIT UNLIMITED;in the above code, replace the filename under the LOCATION with your csv file name.
now you should be just able to do select on this table and insert to the other main tbale.

Upload excel file and display content in sapui5 table

hi:all
how to upload excel files and display its contents in the view of sapui5 table ,then 'create ' these data into the abap database using odataservice.
Do you have any solutions ? I appreciate for your help.

Two possible way come to mind.
1. ADF DI (desktop integration): sorry, don't know enough about it to give a how to :-(
2. POI (http://poi.apache.org/) : open source project to read and write excel file with java. Using POI you can open the .xsl file, read it's contents and display it as af:table. For this you need to read the xsl into a data structure (this can be a temporary db table or a list of POJOs) and build a data control out of it. This you can drop on a page as table.
Timo
Edited by: Timo Hahn on 15.02.2010 13:59

Upload media file and submit data in a same time

Hi,
I'm trying to submit data and upload file in a same time to a web page(which is jsp). But i found that the method used to upload file and submit data are different.
Method used to submit data :-
PostMethod post = new PostMethod(wbIndex);
post.addRequestHeader("Content-Type","text/html; charset=big5");
for(int i=0;i<field.length;i++){
     post.addParameter(field,value[i]);
System.out.print("field[" + field[i] + "], value[" + value[i] + "] ");
responseCode = client.executeMethod(post);
System.out.println("response code : " + responseCode);
and method used to upload file
URL url = new URL(wbIndex);
// create a boundary string
String boundary = MultiPartFormOutputStream.createBoundary();
URLConnection urlConn = MultiPartFormOutputStream.createConnection(url);
urlConn.setRequestProperty("Accept", "*/*");
urlConn.setRequestProperty("Content-Type",
     MultiPartFormOutputStream.getContentType(boundary));
// set some other request headers...
urlConn.setRequestProperty("Connection", "Keep-Alive");
urlConn.setRequestProperty("Cache-Control", "no-cache");
// no need to connect cuz getOutputStream() does it
MultiPartFormOutputStream out =
     new MultiPartFormOutputStream(urlConn.getOutputStream(), boundary);
// write a text field element
out.writeField("myText", "text field text");
// upload a file
out.writeFile("myFile", "text/plain", new File("C:\\test.wav"));
out.close();Does anyone know how to submit data and upload file to the page at a same time?
null

Hi,
Thanks for your reply. You meant that both method also can used to upload file and submit data? How about if i want to use the first method to upload file and submit data? How can i upload the file by using first method?

How do I upload a file and put on a website?

Similar Messages

Maybe you are looking for