How do I use a different browser then safari? I have several sites safari won't connect to.
How do I use a different browser then safari? I have several sites safari won't connect to.
I can connect to Bank of America's site just fine. Can you connect to the site or is it that you can't perform certain functions on the website? Do you know that there is a Bank of America App available?
Bank of America for iPad for iPad on the iTunes App Store
Bank of America Mobile Banking for iPad®
If you download another web browser for the iPad, you use it just like you use Safari. Tap on the app icon to launch the browser and then use it like any other web browser.
Similar Messages
-
How can I use a different Apple ID withthe App Store?
When I access the App Store from my iPhone 3G it asks me to enter the password for an Apple ID.
How can I use a different Apple ID with the App Store?It will use the account you are currently signed into with iTunes when you synced. So in iTunes, change your account, then sync. Then the iPhone will use that one.
-
How Can i Use two Different Public IP Addresses no my DMZ with ASA Firewall.
How To Using Two Different Public IP Address on My DMZ with ASA 5520
Postado por jorge decimo decimo em 28/Jan/2013 5:51:28
Hi everyone out there.
can any one please help me regarding this situation that im looking for a solution
My old range of public ip address are finished, i mean (the 41.x.x.0 range)
So now i still need to have in my DMZ another two servers that will bring some new services.
Remember that those two server, will need to be accessable both from inside and from outside users (Internet users) as well.
So as i said, my old range of public ip address is finished and we asked the ISP to gives some additional public
ip address to address the need of the two new servers on DMZ. and the ISP gave us the range of 197.216.1.24/29
So my quation is, on reall time world (on the equipment) how can i Use two different public ip address on the same DMZ
on Cisco ASA 5520 v8??
How my configuration should look like?
I was told about implementing static nat with Sub Interfaces on both Router and ASA interface
Can someone please do give me a help with a practical config sample please. i can as well be reached at [email protected]
attached is my network diagram for a better understanding
I thank every body in advance
JorgeHi,
So looking at your picture you have the original public IP address range configured on the OUTSIDE and its used for NAT for different servers behind the ASA firewall.
Now you have gotten a new public IP address range from the ISP and want to get it into use.
How do you want to use this IP address range? You want to configure the public IP addresses directly on the servers or NAT them at the ASA and have private IP addresses on the actual servers (like it seems to be for the current server)?
To get the routing working naturally the only thing needed between your Router and Firewall would be to have a static route for the new public network range pointing towards your ASA OUTSIDE IP address. The routing between your Router and the ISP core could either be handled with Static Routing or Dynamic Routing.
So you dont really need to change the interface configuration between the Router and ASA at all. You just need a Static route pointing the new public IP address towards the ASA outside IP address.
Now when the routing is handled between the ISP - ISP/Your Router - Your Firewall, you can then consider how to use those IP addresses.
Do you want to use the public IP addresses DIRECTLY on the HOSTS behind the firewall?This would require you to either configure a new physical interface with the new public IP address range OR create a new subinterface with the new public IP addresses range AND then configure the LAN devices correspondingly to the chosen method on the firewall
Do you want to use the public IP addresses DIRECLTY on the ASA OUTSIDE as NAT IP addresses?This would require for you to only start configuring Static NAT for the new servers between the inside/dmz and outside interface of the ASA. The format would be no different from the previous NAT configuration other than for the different IP addresses ofcourse
Of the above ways
The first way is good because the actual hosts will have the public IP addresses. Therefore you wont run into problems with DNS when the LAN users are trying to access the server.
The second way is the one requiring the least amount of configurations/changes on the ASA. In this case though you might run into problem with DNS (to which I refer above) as the server actually has a private IP address but the public DNS might reply to the LAN hosts with a public IP address and therefore connections from LAN could fail. This is because LAN users cant connect to the servers OUTSIDE NAT IP address (unless you NAT the server to public IP address towards LAN also)
Hopefully the above was helpfull. Naturally ask more specific questions and I'll answer them. Hopefully I didnt miss something. But please ask more
I'm currently at Cisco Live! 2013 London so in the "worst case" I might be able to answer on the weekend at earliest.
- Jouni -
How do I use 2 different iTunes Stores?
How do I use 2 different iTunes Stores simultateously? Active account in South Africa, but need to download apps from the German iTunes Store - which iTunes does not allow, as these apps do not appear on the South African iTunes Store.
You cannot do this.
-
How do I use two different apple IDs on one itunes?
How do I use two different apple IDs on one itunes?
This would be a violation of the terms of use of the itunes store and could result in the loss of your account.
You cannot use the U.K. itunes store unless you are in the U.K -
How can i use 2 different apple ids for imessage and facetime on 1 ipad?
How can i use 2 different apple ids for imessage and facetime on 1 ipad?
Do you mean can you use one Apple ID for FaceTime and one for iMessage? You should be able to. Or, do you mean, can you log into iMessage (or FaceTime) with two Apple IDs at once? No.
-
I can't open or receive hotmail emails on my macbrook pro, but i can on other devices. i changed my password, emptied the cache, tried using a different browser, etc. i think i have a virus. help!
Thanks for your help. that's not working either! ugh!!
I can open hotmail, but it's not formatting right, i can't open emails, nor send them.
Thank you so much for trying to help. I really appreciate it.
I understand that you can't get a virus by opening an email, but it seems way too circumstancial! This is my third mac -- because unlike PC -- I never had a problem. I understand this problem is not with my macbook, because every other website works fine -- it's hotmail! -
I have wi-fi in my home and it has always worked fine with my iPad. Then I went to Ireland and used the iPad there. Since I have been home, it won't work in my house. I can't get my wi-fi connecton. I took it to anothe location where I have logged in in the past, and it worked perfectly. Any ideas as to why I can't get a connection at home?
Thank you.Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
How do I use a Creative Cloud license when I have limited Internet for months at a time?
How do I use a Creative Cloud license when I have limited Internet for months at a time? I proces a lot of photos in remote areas where an application that needs online access would be useless.
Hi Freewill,
Please see the Creative Cloud FAQ here.
Do I need ongoing Internet access to use my Adobe® Creative Cloud™ desktop applications?
No. Your Creative Cloud desktop applications (such as Adobe® Photoshop® and Illustrator®) are installed directly on your computer, so you won't need an ongoing Internet connection to use them on a daily basis.
An Internet connection is required the first time you install and license your desktop apps, but you can use the apps in offline mode with a valid software license. The desktop apps will attempt to validate your software licenses every 30 days.
For annual members, you can use the apps for up to 99 days in offline mode. Month-to-month members can use the software for up to 30 days in offline mode.
Cheers,
Michael -
I am unable to use Muse in-browser editing. I have followed the activation instructions both in Muse and invited users. I have an active site, but when I enter my site URL plus /admin, the graphic dots move but the site goes nowhere and I am never given a chance to enter my email and password. I would greatly appreciate any help. I am thanking you in advance, Bleu
I'd keep trying the other way. You may have hit it when BC was doing an update or something. If it works one way it should work the other way. But sometimes BC can be kind of temperamental and you have to do a little dance or something to get it to work. But it generally comes around and fixes itself in short time.
Have you tried the other way again? -
using the thnderbolt to vga adapter, I have to unplug and replug the connection to get my disply to "wake up" What's the deal? otherwise works fine.
Same on initial boot upFirst try > Resetting your Mac's PRAM
There have also been others reporting problems with analog VGA connected monitors. If your monitor also supports DVI, then you may want to use the supplied HDMI to DVI adapter or switch to a Mini DisplayPort to DVI Adapter and a good DVI cable. -
I have an Apple Ipad. I was having problems receiving and sending emails via my yahoo email account. I deleted the account and then tried to install it but it won't connect to server. Could you let me know what I do please?
I think you have to turn off Private Browsing.
Tap "Private" on Safari Screen to disable Private Browsing. When top of screen is white, Private Browsing is off.
http://i1224.photobucket.com/albums/ee374/Diavonex/547958b4a8c01ac084dd6649e8386 a0f_zps12fa0cca.jpg -
How can I save the update download file as I have several devises to upgrade and cant afford the bandwidth to do each via iTunes.
There does not appeare to be any doenloadable files in the download section."Well that's totally unacceptable."
Actually you can only accept it, as it is the way it is. You may not like it, but it is so. Sorry.
" your seriously telling me that Apple expect me to download the same huge file 8 TIMES"
That is exactly what I am telling you.
" No way."
Still true.
"Apple are going to have to come up with another solution."
No. They do not have to do any such thing. They may choose to do so in the future, but there is no reason to believe that they will. -
the type face when using Firefox 8 has dropped from a normal size to approx 4 point when using my gmail account. Funny thing, if I use an alternate browser, everything is "normal"! how can I fix this problem, as I prefer to use Firefox as my default browser
Reset the page zoom on pages that cause problems.
*<b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
*http://kb.mozillazine.org/Zoom_text_of_web_pages -
How do I use a different apple id on my ipad or other device?
I want to use a different Apple ID. How do I change it?
You can tap on the currently logged in id in Settings > Store (Settings > iTunes & App Stores on iOS 6) and then log in with a different account (any currently downloaded/synced content will remain tied to that account). But if you turn on automatic downloads for an account or download its past purchases then you may tie that device or computer to that account for 90 days : http://support.apple.com/kb/HT4627
Maybe you are looking for
-
Itunes is no longer on the bottom bar on my laptop, where did it go?
i have a macbook pro, i was listening to music on it yesterday and then shut it off and charged it. When i opened it and logged in today, itunes wasnt on the bottom bar, or any where else for that matter. I used to finder to locate the itunes folder,
-
ERROR IN LISTENER CONFIGURATION
hi, i am trying to configure a listener in my computer,having database name as kali and while starting the listener i m getting these errors and i have configured listener1 for my database and port no is 1522. so please give me the solution.. OS- RHE
-
SD report :correlation between SD line item and its FI line item
Hi, We are developing a SD report where we are not able to correlate between FI line item with SD line item.As SD line item have differernt division so how to identify which line item of FI belongs to which SD line item?
-
Smbnetfs manual mount shares returns 'can't allocate memory'
So I have Samba running on my linux computer so that I could access the files on it from my other windows computer. This is all fine and dandy and works. Now when I have another computer thats on Linux and I'm trying to connect to the host machine
-
Oracle Financial , getting external Data
Hai , We have an oracle financial system running with an inventory module , we need to link the database to an external dataase (text file). The program should upload text formatted (comma separated) data into the respective field and update it. Can