How do I use a netgear N600 router with Infinity 1

I have searched various forums etc. with mixed success so am hoping that someone here can give me an idiot's guide to connecting to the internet using my netgear N600 router rather than using the BT Homehub 5. BT say that I can do it (despite my router being set up for ADSL and the HH5 being set up for VDSL) but that they can't tell me how! They sent me an email with various details I would need but I can't see where most of them need to be added when I connect to the netgear set up wizard. What I could see I filled in but when I tried to connect the netgear genie told me the ADSL cable wasn't connected. Can anyone give me a step by step guide of what to do please? I would be very grateful. Thanks

nicolawatt wrote:
I just have the homehub 5 - I have seen various complicated descriptions elsewhere explaining how to use the HH5 as just a modem or how to just connect directly with the Netgear but all have been a bit over my head!
The HH5 cannot be used as a stand alone modem. You could use the Netgear as a simple wireless access point, but you would lose most of the functions, and would be better off using a proper wireless access point.
You cannot use the Netgear as a router, without a modem.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Similar Messages

I hooked up new iMac to wireless network and now iPad and iPhone do not work using wireless. I am using a Netgear N300 router. Also my Netgear ethernet/homeplug for wireless TV internet no longer works. Any ideas?

I hooked up new iMac to wireless network and now iPad and iPhone do not work using wireless. They did before hooking up the iMac. I am using a Netgear N300 router. Also my Netgear ethernet/homeplug for wireless TV internet no longer works. Any ideas? I have tried unplugging, restarting, and resetting. No luck! Thanks!

You should probalby contact Netgear

ITunes Library set up on NetGear R6100 router with ReadyShare from USB port?

Can the iTunes Library be set up on a NetGear R6100 router with it's NetGear ReadyShare feature. from a USB thumb drive or USB hard drive attached to the one available R6100 router's USB 2.0 port?
I have read the Apple forum post about a similar question for the more advanced NetGear R7000 router, which says it can work there. Unlike some of the other sibling Netgear routers that do not have ReadyShare, my R6100 does, which leads me to believe that it should work, since its the same technology (they both have a router USB port with ReadyShare). It just appears that the documentation is very limited. The other post said to format the USB drive to the Apple format (HFS+), rather than Fat32, get the Mac or Apple to see the iTunes directory located on the router's USB port.
I'd like to know if anyone has had any luck using the ReadyShare.feature on their R6100 for sharing their iTunes library to the same iTunes account on different devices (laptop, PC, AppleTV, iPod, etc). My Apple TV has recently acquired a problem of not being able to detect the iTunes library on my PC, aftert a recent iTunes update, but that's another problem that the forums show a lot of people having. So I figured that since my R6100 router has the ability to share media over the network, I would try to move my iTunes library there, hopefully to make it easier to access by my Apple TV, and make it unnecessary to have my PC running when I watch my purchased iTunes movies, that are stored in that library. Interestingly, my movie and TV show files are stored in my iTunes Music folder under the "Movies" and "TV Shows" subdirectories (folders). The way it is set up now, if I'm watching a HD movie purchased from iTunes with my Apple TV, the movie stops playing as soon as my PC is shut down, which confirms to me that the large movie files are being pulled from there to my Apple TV.

Oh groan, not another conspiracy theory. No, it's a lot more likely Apple and Netgear and the dozens of other manufacturers haven't gotten together with the thousands users who have come up with hundreds of thousands of ways of rigging things up and tested each and every one of them. I am confident if Apple were out to mess things up for you they could have come up with something a lot more devious.
Did you do a web search for this? With a Google search specifying Netgear with this error I found:
ReadySHARE USB Hard drive access issue from a Mac Computer (Time Machine or iTunes not working properly)
- Able to see USB hard drive content but unable to write to USB hard drive connected to router's Readyshare port from Mac computer.
- Error that says "The iTunes application could not be opened. Unknown error 13008"
http://kb.netgear.com/app/answers/detail/a_id/22763/~/readyshare-usb-hard-drive- access-issue-from-a-mac-computer-%28time-machine-or
In fact it is almost certain that it is an issue of that particular model router and the drive formats it can use.

How do i use air sync to sync with my iTunes on my computer

How do i use air sync to sync with my iTunes on my computer

You cannot use ActiveSync for that, but there are SharePoint clients for the iPhone. Windows Mobile 7 natively supports SharePoint with SharePoint Workspace Mobile, part of Microsoft Office Mobile. Android and BlackBerry might also have some apps.
Use Microsoft SharePoint Workspace Mobile
http://www.microsoft.com/windowsphone/en-us/howto/wp7/office/use-office-sharepoint-workspace-mobile.aspx
iPhone SharePoint Apps Shootout
http://www.codeproject.com/KB/iPhone/iPhoneSharePointApps.aspx
Comparing SharePoint iPhone Apps
http://blog.praecipio.com/2010/11/02/comparing-sharepoint-iphone-apps/
MCTS: Messaging | MCSE: S+M

How can I use the old Apple TV with new iTunes? It tells me to input a code in iTunes but iTunes no longer has a spot to input this code to allow sync. I can access the iTunes Store fine, just none of my Library

How can I use the old Apple TV with new iTunes? It tells me to input a code in iTunes but iTunes no longer has a spot to input this code to allow sync. I can access the iTunes Store fine, just none of my Library

read this
https://discussions.apple.com/message/20429789#20429789

In my Apple Macbook Air, most of the USB Flash/Thumb Drives are not shown in the Finder Window. Only a few Brands of USB /Flash Thumb Drives are shown or compatible or shown in the Finder. How do I use any Flash/Thumb Drive with my Apple MacAir?

In my Apple Macbook Air, most of the USB Flash/Thumb Drives are not shown in the Finder Window. Only a few Brands of USB /Flash Thumb Drives are shown or compatible or shown in the Finder. How do I use any Flash/Thumb Drive with my Apple MacAir?

Yes, junker thumb drives pour like rain in the market.
Which makes are working on your Air, and which arent?
Stick to Sandisk and a couple of other reliable mfg. of memory sticks

How do I use my apple bluetooth keyboard with touch and will I still be able to use it with my ipad?

How do I use my apple bluetooth keyboard with touch and will I still be able to use it with my ipad?

iPod touch User Guide (For iOS 4.3 Software)

How do I use my late 2011 iMac ( with thunderbolt) as external monitor for laptop/Xbox or other device with hdmi as output.

May be this question has been asked thousand times. how do I use my mid 2011 iMac ( with thunderbolt) as external monitor for laptop/Xbox or other device with hdmi as output. if apple hasn't removed that feature and has just moved that functinoality to thunderbolt then how can I use it. currently there is no laptop available with thunderbolt output. no 3rd party converter available. whats the use of having feature on latest functionality if we cant use it. I wish they would have made one port has mini-dvi and other thunderbolt for backward compatibility untill some vendor comes up with converter.

It Says :
Mac (21.5-inch, Mid 2011) and iMac (27-inch, Mid 2011) and later computers support Target Display Mode via Thunderbolt to Thunderbolt cable (2 m) when the source is another Thunderbolt-equipped computer.
Name one computer model/vendor which has thunderbolt as output for display + audio. this is so stupid to move to new technology without availbility of its compatible devices.

How do i use my own domain name with creative cloud?

how do i use my own domain name with creative cloud?
i don't want to post web pages from behance.net. i want to use the domain name i have for my material. is there a hosting service for this? if not, can someone give me some pointers so I can publish?
thanks!!
Lori

http://forums.adobe.com/community/behance is where you would ask about publishing to "something else" from that program
I use OLD Dreamweaver, and upload my HTML with an FTP program to my own web site... I will GUESS you can do that, if you can save HTML to your hard drive to then be able to upload to your web site

I got an iphone from Hong Kong which is locked one. Can anyone explain me what does a locked iphone means. How do I use it in India now, with my own sim card. How do I unlock it???

I got an iphone from Hong Kong which is locked one. Can anyone explain me what does a locked iphone means. How do I use it in India now, with my own sim card. How do I unlock it???

If your iPhone is locked to a wireless provider, only that wireless provider
can unlock it. Contact the wireless provider in Hong Kong to see if they
offer unlocking and if you qualify.
If your iPhone is locked to an AppleID that you do not know, return it for
a refund as it is useless. Only the person whose AppleID was used for
activation can remove the lock. There is no workaround for Activation Lock.
If neither of the above is what you are facing, provide more detail so someone
may offer a solution.

I HAVE AN OLD 3G IPHONE , HOW DO I USE IT IN ANOTHER COUNTRY WITH A NEW SIM CARD

I HAVE AN OLD 3G IPHONE , HOW DO I USE IT IN ANOTHER COUNTRY WITH A NEW SIM CARD ?

it has to be unlocked by your carrier. give them a call

I have an old external drive with a firewall connection-How do I use this on my Mac with it's USB3 ports?

I have an old external drive with a firewall connection-How do I use this on my Mac with it's USB3 ports?

Does your Mac have ThunderBolt ports?
There are ThunderBolt to FireWire adapters.
As far as I know there are no FireWire to USB 3 adapters.
Allan

How can you use iMessage between 3 iPads with 3 different users but only one Apple ID?

how can you use iMessage between 3 iPads with 3 different users but only one Apple ID?

No you do not need separate Apple ID's in order to use 3 devices with one Apple ID. I use 4 devices to Message and FaceTime and all use the same Apple ID. You do need to add additional email addresses for the other devices.
Look at this very informative video for the instructions.
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l

How do I use a previous email address with my printer?

How do I use a previous email address with my printer? I reset my printer and want to use the same email address as before.Thanks

At this time the printer's email address will not be available for for re-use for 6 months. This is a security measure once an email has been disabled. After that time, one can go into their account and then change the customized email address for the printer.
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?

HT1338 How do I use a philips PicoPix projecter with my MacBook Pro

How do I use a philips PicoPix projector with my MacBook Pro

depends what ports your projector supports. You do not give the exact model.
The standard way is to use MiniDisplay (AKA Thunderbolt) port on your MacBookPro and use an adapter to
ideally HDMI or DVI worst solution VGA.
All depends what the projector has at the back.

How do I use a netgear N600 router with Infinity 1

Similar Messages

Maybe you are looking for