How do I use a network solutions domain

I regestered a domain and would like to forward to my iWeb acct. How do I do that?
Thanks!

You need to publish and upload your iWeb built site to a server and forward the domain name to that.
http://www.iwebformusicians.com/iWeb/Publish-Website.html
http://www.iwebformusicians.com/Search-Engine-Optimization/Upload.html
http://www.iwebformusicians.com/iWeb/Website-Hosting.html

Similar Messages

How can I use Guest network when my internal server provides the DNS?

How can I use guest network when my internal server provides the DNS? The help article TS4505 tells me to enter an external DNS server, but I believe I can not configure my network that way...

Apple assumes that you will be connecting the Time Capsule to a simple modem....and.....that the Time Capsule is configured as a router to provide DHCP and NAT services for the network.
The Guest Network cannot be enabled correctly unless the Time Capsule is in charge of DHCP and NAT services on the network.
Another way of saying the same thing is that the Guest Network will not operate correctly if the Time Capsule is configured in Bridge Mode or DHCP Only.

I have bought a second hand iphone 4S which is locked on at&t how can i use other network sim on it as i have shifted from US

i have bought a second hand iphone 4S which is locked on at&t how can i use other network sim on it as i have shifted from US

Call AT&T and see if you meet their requirements for unlocking the phone. If you don't, then you'll have to purchase a different phone entirely.

How can i use the network logon (VPN) as my default logon environment ?

Hi!
I use my laptop only for connect to my work, but every time i need to switch the last local user and click in the Network Logon icon in the bottom right corner, how can i make the network logon my default logon environment ?

Hi,
Logon process cannot be easily replaced, but if your concern is just to ignore it, we can use auto logon to bypass the manual logon process:
Autologon for Windows
http://technet.microsoft.com/en-in/sysinternals/bb963905.aspx
Alex Zhao
TechNet Community Support

How can I used local network outside the US

How can I set up to use local networks of other countries?

make sure you have the 3G/4G modle if your talking about that, and to use it with a specific carrier you will also need the sim card from that carrier, and you have to restore the device with the sim card from that carrirer in the device, dont forget to back up and tranasfer purchases as well

How do I use my networked HP Officejet to send a fax from my Macbook Pro?

I have a Macbook Pro which I use in my office running OS X 10.7. We have a networked HP Officejet 6500 E710n-z. Ideally, I would like to be able to fax directly from Microsoft Word using this printer using the Fax PDF option. However, I cannot seem to figure out how to do this. Any help would be greatly appreciated.

In order to send and receive a fax you need a fax machine connected to a phone line. What you are likely seeing is an efax. There are many efax services, some free. Efax allows you to send and receive faxes to your computer without using a fax machine or phone line. Using efax you can send a fax to a fax machine connected to a phone line.
Do a search for efax.

How to restrict use of network adaptors

Hello guys,
I'm now setting up a small home server and at home we have right now the possibility of two different internet connections. I want to restrict one interface only to SSH/SCP (although I quite trust this connection still public IP seems as risk to me) for accessing this machine from outer internet and use the second one for other things like browsing or downloading stuff (it's faster, somehow NATed, but on the other hand its community network so there probably should be some restrictions to http only or so).
Is there some not so hard way how to do that? I use net-cfg as one of the connections (the one I want to be SSH only) is done by wireless.
Also I wonder whether the stock Arch network configuration is secure enough or should I pay more attention to security settings? This machine is intended to store some data important to me.
Thank you very much in advance!

I'm not sure I understood everything right, but I can tell you some things.
There is no security in the network by default. If you have a direct internet connection, you should use a firewall to protect yourself from common attacks.
Also, If you plan to use SSH, it's recommended to disable password login and make use of keys.
For the community network, you might want to use a encrypted socks tunnel. That way, nobody can sniff your data, and you'll be able to jump some firewall restrictions.
Concerning to your question about restricting SSH to one interface, you could use iptables to drop all incoming connections in port 22 (or other) from the interface you don't want to use in SSH. I don't know any other way (I'm sure there is a easier one).
Last edited by sironitomas (2011-03-17 18:58:49)

How do I use 2 network cards?

I want to use a wireless connection and a wired connection. Each connection is on a different subnet, so they connect OK. Wireless connection uses 192.168.182.XXX and the wired uses 192.168.1.XXX. Wireless is primarily for internet browsing. Wired connects to a server with nfs shares. However, the wired connection seems to take over when they are both connected.
How do I make the system use the wireless connection when browsing? I have been toying with route. Is this the right direction?
Thanks

I'm using networkmanager in kde 4. I do want both interfaces to be running, so shutting one down won't help me. A typical use might be listening to music over the ethernet connection to the nfs shared music, while browsing the internet through the wireless interface. So I need to figure how to make that happen.
As a side note, the reason for this is that my town provides internet access via an open wifi signal. That is the only way I can connect to the net. In fact, our entire town is on one LAN. Small town ( 40 homes ) in the middle of nowhere. Everything else I want to handle through my router.

How can I use multiple network connections concurrently?

I'm using a Macbook, connected to a corporate network via Ethernet and to a private ADSL connection via Airport. What I want to be able to do is use the Airport connection for specific apps (Firefox, Safari, RDP etc) and the Ethernet connection for anything that needs to access any internal resources (Exchange etc).
From what I've tried, the OS presents the primary connection (set via the Service Order configuration) to the application and nothing else. For example when Firefox is set to not use a proxy I can't access anything, unless the Airport is given priority. But when the Airport is set as the higher priority adapter via the Service Order then I can't access any of the internal network.
Is there any way to work around this or am I stuck chopping and changing whenever I need to get out to the Internet directly?

The highest priority service is the Internet connection. Anything that would go to the internet uses that service. However, you still should be able to access the internal network via Ethernet.
For example when Firefox is set to not use a proxy I can't access anything, unless the Airport is given priority.
That make sense
But when the Airport is set as the higher priority adapter via the Service Order then I can't access any of the internal network.
You should be able to at least access file servers.

Cname settings help needed for a Network Solutions Personal Domain

Hi-
I've purchased a personal domain name from Network Solutions. I've followed the instructions that Apple has given me, and have specified "web.mac.com" as the alias name, as well as specifying "www" in the drop down box in the next field to the right of the alias field. I've also set up my personal domain name on the Apple side. However, after 48 hours, I'm still seeing the "site under construction page" from Network Solutions when I go to view my personal domain. I confirmed on the Apple side that iWeb was now using my personal domain name, and I was also able to confirm that my domain name was/is pointing to web.mac.com. What am I doing wrong? Does anybody out there with a Network Solutions domain name have any experience with this?

Did you ever get an answer on this?

Publishing to network solutions problem

I have been trying to publish my new site to my network solutions domain host.
I press publish then fill out the ftp form but it keeps coming up with a message that says "Incorrect password for "my user name" on "ftp.mydomain.com please try again
Obviously in the above message I have replaced the correct information with "my user name" and "mydomain.com"
But I know I am using the correct password for my domain?
I don't need a mobileme account account or anything do I?
Any help would be great

When I first tried to publish my web site directly from iWeb, I also had a lot of problems and it kept giving me a similar error message even though I was using the correct log in information. I believe the isue is more with the domain host's ftp site rather than iWeb.
In the end, I found it easier to publish the site to a folder and then use a separate ftp client (I use Filezilla) to publish to my domain host. It is an extra step but has never failed me.
Hope this helps.
David

Trouble with Network Solutions mail...

A friend needs to use the Network Solutions (NS) email product for a domain that she is working with. Unfortunately, we are having a problem with the mail account and Apple Mail.
We are able to set the account up and it seems to be working (no error messages), and we are able to send messages (they send and arrive at other email addresses).
Email messages sent to the account, however, do not appear in Apple Mail -- the inbox is just empty.
They DO appear when we look in NS webmail, so they ARE in the account -- they just don't seem to appear in Mail.
We've tried this on two different Macs and have exactly the same result. Seems like there is some sort of configuration issue.
Suggestions?

Has anybody seen this sort of behavior – email simply does no appear in the inbox, no error messages, but mail is visible through webmail interface – with any other service provider?
I haven't tried using the account with POP yet, as a) they claim it works with IMAP and b) I would rather use it that way. I'm not sure what getting it to work with POP would prove, either, but it might be worth a try, just to see.
Any thoughts?

Can't receive IMAP email via Network Solutions account

I no longer am able to get new email messages from my Network Solutions IMAP email account to show up in my IOS mail app on both my iPhone or iPad. If I check my mail via the web interface, I see any new mail that comes in. Also, if I use 3rd party mail apps on my iPhone and iPad, I can see new mail.
Previous to this, I was seeing phantom unread email counts in the app, but no actual unread mail. Now there are no unread emails listed, but also no new mail is showing up, as previously stated.
Anyone know what's going on, and how to correct this? Network Solutions thus-far has been very unhelpful.
Thanks, folks!

Yes. The settings are correct. I've deleted and set up the same account several times now on both my devices, just in case that might fix it. No luck. I'm currently using Inky Mail, which seems to have no problems accessing my email. Would be nice to be able to once again use the stock Apple mail app, though.

Can use 4G network

hi,
my SIM card ,network provider and my passport cell phone should support the 4G network, but i can't find the 4G section at "Settings->Network and connections -> Mobile Network -> Network Mode". I only could see 2G, 3G, and 2G & 3G.
how can i use 4G network?

funny, in my passport "network mode" does not appear at all thereby not allowing selection of any "G" ...I can only assume this is carrier specific (I have AT&T USA) & the hand-off from one "G" to another is handled by the tower to give the most efficient available... I have seen the 4G symbol from time to time depending where I lurk...
10.3.1 SW .1779 OS .2726 WLAN .1.1 Radio .2727

How do I get my outgoing mail to work using Network Solutions email

I use Network Solutions to host my URL and email. I had Thunderbird working but my computer crashed. I had to reinstall Windows and Thunderbird. I now cannot get my outgoing email to work. I've tried different SSL, Port, and Authentication settings with no success. Does anyone know how to setup Network Solutions email in Thunderbird?

Have you asked Network Solutions about the correct server settings?
Presumably they do have a support web site.

How do I use a network solutions domain

Similar Messages

Maybe you are looking for