How do I use a preamp for an input, but have it ouput through my speakers?

I'm using a Mobile Pre USB with the guitar plugged in through INput 2 and the Mic through Input 1. When I put the driver as the Preamp, I can't get the sound to output through my default Imac speakers.
How can I use the preamp while having the sound come out of the default speakers?
Thank you

If I understand your question right (which I'm not sure I do), you would go to your audio midi set up in the Utilities folder. From there you should see an option for setting up how your USB Pre operates and you should be able to select it's output as the internal speakers. If you use this option though you will not get any midi output unless you assign it to a virtual instrument or an internal audio object. If your not concerned with that then this should work just fine.

Similar Messages

How do I use domain guessing for single word but search for multiple?

I would like to configure the search bar to make smart decisions about weather it should fill in an address or search for results. At the very least I would like it to be able to search when multiple words are entered but fill in the address when it's only one word (eg: typing "zelda" would take me to www.zelda.com but "the legend of zelda" would use search)

The answer that you are probably looking for is what Google calls the '''I'm Feeling Lucky''' Search. Not quite what you describe but if there is one result that stands out as the most common result, you will get taken directly to the page. (Wouldn't work for me, I seldom find what I looking for in the first five hits.)
This will involve a change to your '''about:config''' configuration variables.
'''keyword.URL ''' default string
http://www.google.com/search?ie=UTF-8&oe=UTF-8&sourceid=navclient&gfns=1&q=
The '''&gfns=1''' is what gets you the I'm Feeling lucky search.
References:
* http://dmcritchie.mvps.org/firefox/search.htm
* [http://kb.mozillazine.org/About:config About:config - MozillaZine Knowledge Base]
* [http://kb.mozillazine.org/About:config_entries About:config entries - MozillaZine Knowledge Base]
<hr>Personally I prevent all (external) searching from the location bar to prevent errors from being redirected to a substitute page (along with additional filtering via the '''Adblock Plus''' extension).
For '''zelda''', I would type in the word and then use '''Ctrl+Enter''' so that it becomes www.zelda.com (with "Ctrl+Shift+Enter" gets .org, and with "Shift+Enter" gets .net).
For more information on '''keyboard shortcuts''' and the fact that those two shortcuts above can be [http://www.mvps.org/dmcritchie/firefox/keyboard.htm#newtab switched] see
* Firefox and other Browser Keyboard Shortcuts (Comparison Table)<br>http://www.mvps.org/dmcritchie/firefox/keyboard.htm
The '''AwesomeBar''' search is what you get in the location bar drop-down when you enter strings of characters that exist in the Title and/or url address of a previously visited site or one that you have in your bookmarks. You see those choices '''before''' you press "Enter".
Once you press "Enter" by default you would do a search with your currently selected (default) search engine, as if you had entered the search into the search bar.
I don't like the last method and would use a ''keyword shortcut'' to use a customized search or to go directly to a web page. But without knowledge of what is available using the Location bar to run an external search works okay for most people.
<hr>
The "weather" threw me because for weather you really do want a keyword shortcut, the word you meant was whether.
More information on [http://dmcritchie.mvps.org/firefox/kws.htm keyword shortcuts].
* http://dmcritchie.mvps.org/firefox/kws.htm

HT204053 Dear Support Team, every time i tried to logon Icloud its gives me wrong user name or password and at the end it show me error " This Apple ID is valid but is not an ICloud Account" then how can i use one account for same Apple ID and ICloud???

Dear Support Team,
Every time i tried to logon Icloud its gives me wrong user name or password and at the end it show me error " This Apple ID is valid but is not an ICloud Account" then how can i use one account for same Apple ID and ICloud?
Thanks

It is not possible to create a new iCloud account using a Windows machine. You must create the account using a Mac (10.7.5 or more) or an IOS device (iPhone etc). Once that is done you can sign into and use the account on your Windows machine.

How do I use the VIs for the Fluke Hydra Series 2620a multimeter?

This message refers to the VIs found at this link:
http://sine.ni.com/apps/we/niid_web_display.download_page?p_id_guid=E3B19B3E9468659CE034080020E74861
How do I use the VIs for the Fluke Hydra Series 2620a multimeter? I am conducting a Senior Design Project at Temple University. It is a Control System where I need to read voltages from sensors and output voltages to different system components. I am trying to set up a VI using the VIs found above to make sure that I can successfully read and send voltages. There was no documentation given with the 2620a VIs.

Unfortunately, you've got a very old driver for an old instrument. The only available help is to turn on Context Help and move your mouse over the VI icon. It doesn't appear to have any help for individual controls and indicators. The only good news is that it appears to be a simple instrument with only a few functions. There's some main ones line initialize (to set serial port), configure channel, configure instr, and read values. One main thing is whether you're using gpib or serial, Each front panel has a setting. If it's gpib, set the port to the gpib address. If it's serial, set the port to one number less than the com port you're connected to. For example, if you're using Com1, set the port to 0. For the other controls, I'm afraid that you're going to have to try and compare what's there with the controls and settings of the actual instrument. Having access to the instrument manual will be essential. I would engourage you to experiment a little. There's probably very little chance of damaging the instrument especially if nothing is hooked up to it. Send a command and see what happens or set the instrument up manually and see if you can reproduce that via remote control.

How do i use MIB-2 for writing MIB for my application?

I want to use the existing MIB-2 to write MIB variable for my application. The application is energy metering.So How do i use MIB-2 for writing MIBs for my application?
Santosh Chavan
IIT MADRAS.

For others who do not know what an MIB is, here is link that shows some more information:
http://www.cisco.com/univercd/cc/td/doc/cisintwk/ito_doc/snmp.htm . A quick Google of MIB did not turn up any useful information, but looking for SNMP quickly found this link.
It really turns out that I am not the person to help.
It turns out that I am not the person to help, but I always want to know more as I may have a similar problem later. I know from personal experience that it is easy to use a term commonly in a company or industry but have no one out side of that industry understand. I was asking if that was such a term (hopefully with a little humor). I'm sorry if my joke fell flat.
I hope that you get an answer,
Bob Young
Bob Young - Test Engineer - Lapsed Certified LabVIEW Developer
DISTek Integration, Inc. - NI Alliance Member
mailto:[email protected]

How do i use appl id for my phone?

how do i use appl id for my phone?

Sign into the device with the Apple ID.
Reading the User's Guide might also allow you to ask a more intelligent question and have a much better understanding of how the device works.

How do i use my number for imessaging instead of my email

how do i use my number for imessage instead of email

Hello there, qbullard.
The following Knowledge Base article reviews the process for adding your number to iMessage:
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

How do i use parallel compression for 4 drum tracks in Logic pro 7.2.3 Please

how do i use parallel compression for 4 drum tracks in Logic pro 7.2.3 Please. my version is 7.2.3 and my son did his drums on 4 tracks. 2 OH's 1 Kick and 1 Snare. Were confused because we cant figure out how to do parallel compression on the older logic version 7.2.3?

I can't remember when the Aux tracks became the new buss tracks, so I'll spell this out using busses.
The way I do it, is I assign all my drum tracks to a buss, say buss 1.
Then, on buss 2, I assign it's INPUT to buss 1.
So buss 1 (all the drums) are feeding into buss 2 simultaneously.
Put a compressor on buss 2, turn the fader down all the way, then as the track is playing, bring buss 2's fader up slowly, until you hear the effect you're after.
You could also do this using sends on the 4 drum tracks, set to feed the buss with the compressor on it.
I hope I haven't forgotten anything particular to that version of Logic. See if this helps...

HT3354 how can i use one table for reference to another

how can i use a table for a referance to another eg when i type a word in a cell, i will like it to match the word with another table then return the information in the cell i am using

you can use vlookup() (or any of the lookup family of functions) to locate an item based on a key value:
Here is an example of something you can do with two tables:
The table on the right is title "Data" and stores a list of names with age and favorite color.
The table on the left uses the value in the first column to lookup up information in the table Data
in the table on the left:
B2=IFERROR(A2&" is " & VLOOKUP(A2, Data :: A:D, 2, 0)&" years old and likes the color "& VLOOKUP(A2, Data :: A:D, 3, 0), "NOT FOUND")
I know this look complicated. so I'll break it up into smalled pieces:
first the "&" is called the concatenate operator and joins two strings. like this:
a string is a set of characters between double quotes.
so "string 1" & "string 2" becomes "string 1string2" or "Sam " & "Jones" becomes "Sam Jones"
you can use cell references instead of strings directly in which case the concatenation is performed on the contents of the cells.
so if cell A1 contains "Hi " and the cell A2 contains "There" then A1 & A2 will result in "Hi There"
so you could add the formula
A3=A1 & A2
this is short hand for select cell A3 then type everything including the A3 so that A3 contains "=A1 & A2" (omit the double quote)
OK. So the formula I provided concatenates several items together:
it concatenates A2, then the string " is " then a formula, then the string " years old and likes the color " then a formula
the two formulas (highlighted in blue) perform a lookup of the value in cell A2 in columns A thru D of the table named "Data". If if finds the value in cell A2 in the first column of the lookup range in the table Data (column A) then it returns the value from the same row but in the second or third column.
all that is in a function calld iserror() to trap the condition where the calue you enter in A2 does not exist in the table Data:
You will find the Numbers users guide and function reference helpful. You can download then from Apple here:
http://support.apple.com/manuals/#productivitysoftware

How can I use jbo:InputSelect for a char type filed?

How can I use <jbo:InputSelect for a char type filed?
I have two tables. One is room (primary key is room(type is char)), another table is responsibility (foreign ker is room(type is char)). Both tables have same length for room column.
There is a problem:
If I use (in the "DataEditComponent.jsp" file)
<jbo:InputSelect multiple="false" datasource="dsEdit" displaydatasource="roomData" displaydataitem="ROOM" displayvaluedataitem="ROOM" ></jbo:InputSelect>
to get the room input for responsibility from combobox(Datasource roomData is from room table). In the form the room field cannot bind the data in combobox, alway select the first item. And if I select one item and click the update button.There is an error message:
Error Message: JBO-27010: Attribute set with value H409 for Room in Responsibility has invalid precision/scale
I found If I changed the field type from char to varchar2 in database also change the entity objects, it works well. I wonder if there are any diffrence using <jbo:InputSelect tag in char and varchar2 type. How can I use <jbo:InputSelect for a char type filed as i don't want to change my datatype in database at this stage.
I try this in JDeveloper 9.03, 9.034, 9.04. The result is the same.

If I were in your shoes, here's how I would do it:
<%-- Assuming you have dsRoom and dsResponsibility --%>
<%-- Select is an HTML tag --%>
<select name="ROOM" size="1">
<% char roomID =""; // Init your character var
// Open a rowsetIterator to get the records and add them to the LOV
<jbo:RowsetIterate datasource="dsResponsibility" changecurrentrow="true" >
<% roomID = (char)dsResponsibility.getRowSet().getCurrentRow().getAttribute("ROOM"); // Grab the char value
// add the value to the LOV
%>
<option value="<%=roomID%>"><%=roomID%></option>
</jbo:RowsetIterate>
</select>
If you are using this as part of an edit page you may want to utilize the "selected" option of the <option> tag. In one instance I am doing this on an edit page because the use may open an existing record. If I don't account for it, then it will change the DB to contain the first value from the list! You can do a simple check like:
//Set the current record's char
char curRecord = (char)rowEdit.getAttribute("ROOM");
// inside the iterate:
if (curRecord == roomID) {
<option value="<%=roomID%>" selected><%=roomID%></option>
} else {
<option value="<%=roomID%>" ><%=roomID%></option>
Hope that helps!

HT204053 Hello, I have two iphones but one Apple ID. How can I use localization apps for a dedicated device? Tx

Hello, I have two iphones but one Apple ID. How can I use localization apps for a dedicated device? Tx

On the iPad open Settings/iCloud and delete the account using the button at the bottom. Once deleted log in using the other account. For iTunes Stores use Settings/iTunes & Apps Stores, tapp on the Apple ID at the top then sign out. Once done sign in using the other account. Once you are happy with the changes plug your iPad into your computer to update the backup.

How do I use a Creative Cloud license when I have limited Internet for months at a time?

How do I use a Creative Cloud license when I have limited Internet for months at a time? I proces a lot of photos in remote areas where an application that needs online access would be useless.

Hi Freewill,
Please see the Creative Cloud FAQ here.
Do I need ongoing Internet access to use my Adobe® Creative Cloud™ desktop applications?
No. Your Creative Cloud desktop applications (such as Adobe® Photoshop® and Illustrator®) are installed directly on your computer, so you won't need an ongoing Internet connection to use them on a daily basis.
An Internet connection is required the first time you install and license your desktop apps, but you can use the apps in offline mode with a valid software license. The desktop apps will attempt to validate your software licenses every 30 days.
For annual members, you can use the apps for up to 99 days in offline mode. Month-to-month members can use the software for up to 30 days in offline mode.
Cheers,
Michael

I want to know that i have recently create an apple id, i want to know that how i can use this id for gsx(without paid) or how to use this id for knowlaged

i want to know that i have recently create an apple id, i want to know that how i can use this id for gsx(without paid) or how to use this id for knowlaged
pls give braef intro about all this things, i have searched on sites but i am not getting exact thing and meaning pls help
and i wnat to complete hardware exam of mac what should i do
thanks
vicckey

GSX, if you're referring to Apple's service by that name, is available only to employees of Apple-authorized service providers or self-servicing accounts. Unless you are employed by such an organization, you cannot access GSX. If you are employed by such an organization, they should set you up and give you the appropriate login information.
If you are interested in becoming a certified Apple hardware technician, you can find information here:
http://training.apple.com/certification/acmt
Please note, though, that certification does not in and of itself give you access to any of the Apple resouces for support organizations; diagnostic tools, parts ordering, etc. You again must be employed by an authorized Apple support provider before you can gain such access.
I have no idea what "knowlaged" might be.
Regards.

TS3988 It seams that i have another Apple ID, how can i use only one for everything?

It seams that i have another Apple ID, how can i use only one for everything?

http://support.apple.com/kb/HT5622?viewlocale=en_US
-The specific point:
Apple IDs cannot be merged. You should use your preferred Apple ID from now on, but you can still access your purchased items such as music, movies, or software using your other Apple IDs.
If you are wondering how using multiple Apple IDs relate to iCloud, see Apple IDs and iCloud.

HT201269 Hi I've been using apple products for sometime now , I have one iPad , & 2 iPhones under my apple Id but that's as I know oh and maybe an old mini iPod I lost but my question is, is there any way to check how many devices are under your apple ID

Hi I've been using apple products for sometime now , I have one iPad , & 2 iPhones under my apple Id but that's as I know oh and maybe an old mini iPod I lost but my question is, is there any way to check how many devices are under your apple ID ?

If you have registered all your Apple products, you can see them at:
https://supportprofile.apple.com

How do I use a preamp for an input, but have it ouput through my speakers?

Similar Messages

Maybe you are looking for