How do i use a second micraphone

i am using an ipad mini

A second plug in microphone?
They do have splitters that might work. Haven't tried one on the ipad but there are the 3.5MM splitters that might work
beyond that if you gave some more details maybe it'd help in finding you an answer.

Similar Messages

How can i use a second router to replace verizon fios router?

Okay so just as the title says how do i use a second router? I got a cisco valet router... I don't know how to use it because the verizon router/modem is wierd i know how to use a router if i only had a modem but fios gives router/modem so how can i use my 2nd router? The current verizon fios router/modem is b/g mode and i wanna change to b/g/n so i can get a better speed from my internet... SO how can i use my 2nd router? I tried this http://www.dslreports.com/faq/verizonfios/3.0_Networking#12506 but i don't get it can someone guide me better or make a video explaination on how to use a 2nd router? I have it connected with see as in pic i connect from my router Internet port to wan port and the ethernet lan port to the ethernet lan port on verizon fios and no work please help...

OK, so with this, we have a few options. You appear to have a MoCa connection to the ONT, hence the coaxial cable being present.
1: The ActionTec can be bridged to the Valet router. This will not require any additional cabling, however it will require a small amount of work to have working. You will also require the ActionTec still in the mix, even though it will not be acting as a router anymore with this configuration.
Visit http://www.dslreports.com/faq/16077 and look at Option 4. There is a thread linked that will allow you to set up the ActionTec as just a MoCa bridge, and will pass the Public IP to your router. You will, in order for this to work once the ActionTec is bridged, need to connect the cable from your Valet router's Internet port, to the ActionTec's LAN port and nothing else goes to the ActionTec. From this point, your Valet should run as your primary and everything should connect through your Valet. If you are adding another router, a Netgear N300, you should perform the LAN to LAN setup, which we will talk about once you've got the Valet working correctly. LAN to LAN configs require a custom setup, so do not set up the Netgear for now.
2: This is my preferred method, which would be to run an Ethernet cable to the ONT. Option 6 in the FAQ. This will require spaking to Verizon to have them move your ONT to Ethernet, but once they do this, you can disconnect the Coaxial Cable from your ActionTec router, and plug in your CAT5/CAT6 cable from the ONT to the ActionTec's Internet/WAN port. Use the ActionTec to ensure everything is working after the switchover, and once off the phone, log into the ActionTec, perform a DHCP Release, and then prompty power off the ActionTec. Once this is done, plug the CAT6 cable into your Valet router's Internet port. You should from this point, be able to connect to the Cisco, and if the DHCP Lease was broken successfully, the Cisco should begin serving up your Internet connection. If it does not, leave the Cisco powered off for a few hours to break the DHCP lease, and then power it up. If the Valet does not work, still, give the Valet a factory reset and set up this router again, with the Ethernet cable from the ONT connected to it.
I would just take a good luck at the FAQ linked above again, and see what would work the best. Easiest thing to do is to get the ONT moved to Ethernet, which allows you to eliminate the ActionTec unless you need it in the future for TV service, and also allows you to use any router with ease.
Once the Valet is up and running and holds your Public IP address from Verizon (use http://whatismyip.com/ to determine this) , and also serves up IPs to devices on your network, post back and we can help you set up the Netgear. If you have any issues while setting this up, fall back to the ActionTec. It's factory reset will work without configuration needed, regardless of you being on Coax or Ethernet.
========
The first to bring me 1Gbps Fiber for $30/m wins!

Hi, folks can some body help me¡ How I can use de second code to the Itunes card to use the Itunes card.... My number is vanished, how i can submit my Itunes card?

Hi, folks can some body help me¡ How I can use de second code to the Itunes card to use the Itunes card.... My number is vanished, how i can submit my Itunes card?

iTunes Store: Invalid, inactive, or illegible codes
http://support.apple.com/kb/TS1292

How can i use a second external webcam on my MacBook Air 11

How can I use a second external webcam with my MacBook Air 11" 2011?
Are there specific compatible webcams?
Can both cams be use at same time?
How would I choose which cam would be the active one, for example with FaceTime or Skype?
Thanks for any tips.

paolo@spring wrote: How can I use a second external webcam with my MacBook Air 11" 2011?...
Plug it in and launch the app you will use to run it.
paolo@spring wrote: ...Are there specific compatible webcams?...
Yes. In general, any current USB model (will meet the "UVC" standard) can work on any Mac running Mac OS X 10.4.8 or newer.
More specifically:
(1) You have a choice of many Mac-compatible USB cam. Some examples of current compatible cams are described at http://www.mac-compatible-web-cam.com/.
(2) If you want a wireless cam, consider http://ecamm.com/mac/webcam/bt1/
(3) OS X already has everything it needs for Mac-compatible cams. I recommend that you not add any OS X software that comes with your chosen camera to your OS X Mac, at least until you have tested your new cam without adding anything.
paolo@spring wrote:... Can both cams be use at same time?...
Multiple cameras can be connected at one time, but asking your Mac to actually use (capture and process) more than one video stream at a time might cause processor and data bus capacity problems. The normal method is to connect your cameras and switch between them as needed, actually using only one at a time.
paolo@spring wrote:... How would I choose which cam would be the active one, for example with FaceTime or Skype?...
The software you use to operate the cameras controls that. For more info, start with the answer in this topic link.

How do I use my second hard drive for storage, not back up?

Hi, I bought a second hard drive to store files (not back-up for my system), but when I moved some files over to drive two and then deleted the same files from drive one, they also deleted from the 2nd drive! Fortunately I could reverse the process and there was no loss, but what now? How do I disconnect the two so I can use the second as storage?
Thanks and happy Easter for those of you who celebrate it. Kate (Porter)

Whilst I normally drag files around, a copy and paste still should have created a replica on the destination drive.
That the second is mounted internally makes my describing it as an external drive inaccurate, but wouldn't cause the problem.
So that still leaves the scant possibility that the original source is itself an alias.
Was the copy and paste done in a Finder window or was it done via some other application's window?
I look forward to an update on this unusual event.

How do I use my second monitor when first monitor in full screen??

HI. I just added a second monitor to my mac mini lion setup and when I go full screen with an app I can't use the other monitor. How do I fix this? Thanks.

Bump?

How do I use a second computer as a monitor?

Hi,
I have an iMac and a MacBook Pro. I want to primarily use my iMac and use my macbook as a monitor. I'm a musician and I want to run Ableton on one screen and maschine on another.
For some reason I can't find any forums explaining this, unless I'm just wording it wrong. I'm assuming it's a cord I need, probably a firewire.
Anyone know what to do?
Thanks,
Savanna

Ok, thanks. So my iMac takes a mini displayport cable and my macbook pro takes a thunderbolt cable. Do you know if they make cables with one side mini
displayport and the other side thunderbolt? I tried searching but found nothing. I'm guessing the only difference between the two (since they physically look the same) is the wiring inside, so they can't make a cord with both together.

How do I use a second hand iPod?

I have been given an 80gb iPod Classic by a friend who got a new one and has now gone travelling. How do I get it to work for me as I don't have access to her computer? Of course when I plug it it it doesn't show on the desktop or in iTunes, I'm not worried about losing the music that is already on the iPod.
Any ideas?

Go in to your local AT&T store. Tell them you want to switch over to the iPhone. They will need to give you a new MicroSIM for the iPhone and get the information registered to enable things like visual voice mail. You will also need to subscribe to a data plan if you do not subscribe to one already.

How to use a second monitor in I movie 11

How can I use a second monitor in i movie. I could use it under preference in imovie 9, but in the new imovie 11 i can't find any advanced prefernces let alone how to use a second monitor

I too got the same. Both monitors went portrait. Then I unchecked the 'Mirror Display' option in the Arrangment tab of iMac display and voila. Got what I wanted.

How to use my second hard drive on my desktop pro

I have a 12 core desktop pro with 2 HD's installed. How can I use my second hard drive independently? To use it as a second computer unto itself without all the
extra add on's I have on drive one.

how long ago did you ask this question?

Using the second hard drive in my G5

I bought my Mac about 14 months ago with twin 250GB hard drives fitted. I wanted to use the second hard drive to store my CD collection through itunes.
I have tried to install itunes on the second hard drive but the software installer says it has to go on the startup volume. I have also tried copying my itunes folder and pasting it to the second hard drive as a backup but it won't allow this either. It says that the drive cannot be modified.
How do I use the second hard drive as intended? I upgraded to Tiger so do I need to install that on the second hard drive?
Thank you.

Hi Mike;
I have a 250 GB and a 160 GB hard drive in my Quad. A long time ago when I had much smaller drives, I did move Users to another disk because I was running out of space on my system drive. One of the problems I ran into with this was when my second drive with Users on it didn't start quickly enough for OS X. OS X created a new Users for me with nothing in it. It was a royal pain getting my system pointed back to the Users on the second drive.
What I do now is leave Users where OS X installs. I now move just my project files, music, photos and web pages. I find that this is largest part of Users. It is also the part of Users that I am the most concerned about. With all of my project files on another drive, the system is able to access data from both drives very quickly. It also makes backup simpler.
Allan

How to best use IDSM in promiscuous mode?

Hi folks
I need some input and ideas how to best set up my IDSM2 module.
Today I have the module set up to capture traffic from the 6513 using SPAN in both directions and two different firewalled VLANs as sources. The destination is data-port 1 on the IDSM. This setup is working fine but I'm curious as how to best use the second data-port. Our 6513 runs IOS 12.2(18)SXF3 and has a limit of only one SPAN session set up to capture an entire VLAN in both directions.
My idea was to use the second data-port as SPAN destination for our external/non-firewalled VLAN, but this isn't allowed.
Does anyone have or had a similar problem? Would using a VLAN access list with data-port 2 as destination be an option or are the dual IDSM interfaces mainly used for inline mode?
Regards
Fredrik Hofgren

Fredrik,
I am using VACLs in the switch that has the IDSM. This will preserve your SPAN sessions.
You can specify which vlans go to which port on the IDSM.
We actually have our external vlan set up as an inline vlan pair on data port 2.

How do I use my iPad as a second screen with my macbook pro?

I've got splashtop streamer for my ipad. In school my computer teacher has two monitors and she is able to drag stuff from one screen to the other. If i was streaming to my ipad, how could i use it as a second screen? and how could I do this with any old monitor?
BTW if you dont know splashtop streamer, it is a software that lets you stream content from a computer or laptop to a wireless device, such as an iPad.

Splashtop only has the ability to mirror your Mac's single screen. It does not let your iPad work as a second screen.
You need an app that is designed to turn your iPad into a real second monitor.
I use Air Display to move all of my pallets to one screen when I am working with my graphics programs on my Mac. I keep my iPad connected to my iMac to keep it charged while I am using my iPad in this manner.

How can i use my smart TV as a second monitor for my Power mac (2010) via HDMI cable? i've made the connection but no options show in system prefs display.

How can i use my smart TV as a second monitor for my Power mac (2010) via HDMI cable? i've made the connection but no options show in system prefs display.
the computer:Mac Pro, Mac OS X (10.9.5), 2 x 2.66 Ghz 6-Core intel Xeon
the TV: LG Smart tv

The Mac uses a highly-parameterized universal Driver for every display. The parameters are set at certain times when a query is sent to your display. The display MUST answer with its name and capabilities, or the screen stays dark. A TV set that is off or "not paying attention" because it is set to a different port when the query occurs will rarely answer, and so will often remain dark.
You can use tools in the System Report to see whether your display has been detected at all. If it has, the report will look something like this, but its name will appear:
The times when the query is sent are:
• at Startup
• at wake from sleep
• when the Mac-end of the cable is inserted
• when using the Option ( Detect Displays ) button in displays preferences

How do I use my wireless Led TV as a second monitor using my home network without any cables? Both of them are connected to home network

How do I use my wireless Led TV as a second monitor to my mac book pro using my home network without any cables? Both of them are connected to home network

Having a gateway there is not going to be a problem. We just need to configure the Time Capsule correctly to work with the 2Wire.
You will need one ethernet cable to connect the 2Wire to the Time Capsule and a second ethernet cable to temporarily connect your computer to the Time Capsule so that it can be configured.
The 2Wire you have now should already be broadcasting a wireless network, so once you have the Time Capsule setup, you will actually have two wireless networks there.
Here's how to configure the Time Capsule to work with the 2Wire:
Connect an ethernet cable from one of the LAN <-> ports on the 2Wire to the WAN (circle icon) port on the Time Capsule.
Connect another ethernet cable temporarily from your computer to one of the LAN <-> ports on the Time Capsule
Open Hard Drive > Applications > Utilities > AirPort Utility
Click Manual Setup
Click the Base Station tab below the row of icons to assign a name for the Time Capsule, a device password (write this down) and adjust time zone settings
Click the Wireless tab below the row of icons
Wireless Mode....Create a wireless network
Wireless Network Name....Your choice
Radio Mode....Automatic
Channel...Automatic
Wireless Security...WPA/WPA2 Personal
Wireless Password....Your choice (write this down)
Check mark next to....Remember password in keychain
Click the Internet icon
At the bottom, change the setting for Connection Sharing to "Off (Bridge Mode)"
Click Update at the lower right and the Time Capsule will restart after 20-25 seconds and you should get the green light.
You should now be able to connect to your Time Capsule wireless network.
I'm not clear on whether you have tried to setup the Time Capsule to backup your computer. Post back if you need some info on that. We may need to start another thread for that as that will be a different subject.

How do i use a second micraphone

Similar Messages

Maybe you are looking for