How do I use a USB microphone with logic?

Logic recognizes the samson meteor microphone, but how do I get sound from it when using it for a track? Do I select an audio, software instr, or midi track? I also use an audiobox midi for my keyboard. For that, I select software instrument and then I have sound. I tried creating an aggregate device but still no sound. Thanks so much for any help possible..

The headphones port outputs audio signal from Logic. Plug the mixer into the lin-in port.
JG

Similar Messages

How can I use a USB camera with cRIO 9022. Please see my strange problem.

Hi,
I would like to use a USB camera with NI cRIO 9022. I used the same USB camera with NI USB 6216 DAQ device and developed a VI(within a PROJECT and outside it). So, It is working fine with NI USB 6216 device when I use the Vision Assistant Express VI and gets detected in its Initialization Window. Please see JPEG File 3 where I get NO ERROR.
I am facing a problem when I want to use it with NI cRIO 9022. What exactly I am doing in this case is:
1) Create a NEW PROJECT
2) Add Targets and Devices(NI cRIO 9022)
3) Use the Scan Interface mode
4) Create a NEW VI under the cRIO 9022 device
5) Use a Timed Loop(Synchronized with Scan Engine) for continuous Data Acquisition and Sending from the Analog I/O modules.
6) Use the Vision Assistant available through the NI Vision Acquisition 2010 Module(I get STUCK HERE! The Express VI opens the Initialization Window, but I don't see the USB camera like in JPEG File 3)
I am facing difficulties with this HOST COMPUTER, cRIO implementation differences. On my host computer I have the software packages as shown in JPEG File 1, and on my cRIO 9022 as shown in JPEG File 2.
Can someone guide me how to overcome this and get the USB camera detected when I am using NI cRIO 9022?
NOTE: If this is a problem with software mismatches on HOST and NI cRIO 9022 device, please see JPEG Files 1 and 2 for available software and Host and cRIO 9022.
Thanks.
Amar.
Attachments:
NI Vision Acquisition Express Error for NI cRIO 9022.JPG ‏39 KB
IMAQ and dx Modules Installed on my NI cRIO 9022 hardware(No NI Vision Acquisition 2010 SP1).JPG ‏82 KB
NI Vision Acquisition Express NO Error for NI cRIO 9022.JPG ‏48 KB

Only GigE comms are supported on the cRIO Real Time OS. Have a look at the following:
Machine Vision on NI CompactRIO and Single-Board RIO
Adnan Zafar
Certified LabVIEW Architect
Coleman Technologies

How do I use an external microphone with iPhone Facetime?

Model of iphone doesn't matter to me. I have an Iphone 4S or Iphone 5 to use. I am specifically trying to use a wireless microphone set with Facetime so I can get better audio quality at a distance. Of course, I have a mount for my phone so it's pointed toward me. Can anyone figure out how I can bypass the internal microphones and use and external? I have already tried plugging into the jack on the phone, but no luck.
If there is some sort of adapter to plug into the Lightning port or 30pin that might bypass the external mics when using Facetime then I can go with that too.
Any help is appreciated!

Hello lizarose,
You might consider recording your video in the QuickTime Player application. The QuickTime Player application will allow you to control input sources for both your video and audio (allowing you to choose the Fast Track for audio and the iSight camera for video).
Once in QuickTime Player, choose 'New Movie Recording' from the File menu. In the resulting window, on the controls bar (near the record button), there will be a small triangle. This triangle will produce a menu allowing you to choose your Fast Track as the desired microphone.
Once the video is recorded and satisfactory, from the File menu, you can choose 'Export To,' then 'iMovie...' After the export process completes, open iMovie (close and re-open if necessary), and you should be prompted to import the video into iMovie. If, for some reason, iMovie is not an option, the video can be exported to the Desktop or the Movies folder (if exporting, choose 'Movie' for Format), then imported into iMovie via the File menu, 'Import,' 'Movies...'
QuickTime Player 10.x: Record video or audio
http://support.apple.com/kb/PH5871
QuickTime Player 10.x: Export a movie in another format
http://support.apple.com/kb/PH5878
iMovie '11: Import video from movie files
http://support.apple.com/kb/PH2153
Cheers,
Allen

How can i use my axiom 49 with logic pro X

Hey..
So I've been using logic to make music for a while now and just recently obtained an axiom 49 controller to open my possibilities. The only thing is, I have no idea exactly how to make it work the way I expected it to. All that comes by default is that my keybord works with all the types of preloaded instruments, but none of the faders or knobs work.. Is there something else i need to install or is it in the settings?
Highly appreciate any help,
Danny

Ok, I'll ask again... have you downloaded and installed the software that enables the keyboard to become a controller for all the functions you've described?
You have to be an active participant in getting things to work correctly.
Have you read the M-Audio manual that tells you how to do this?
Here, I just went to the M-Audio site.
http://www.m-audio.com/index.php?do=support&tab=driver&serie_ID=3&PID=65526d20ff 75725a01dcf4dfab822e9d#tabs
It looks like it's called Direct Link, I imagine it comes with directions how to install the software and get it working with the keyboard. It's for Logic 9 but I suspect it will work with Logic X

How can I use a USB keyboard with my Macbook Pro?

My MBP will not recognize my brand new USB keyboard.
I have tried the keyboard on two other Macbook Air's and it works perfectly.
My MBP:
OS X Yosemite
10.10.1
Macbook Pro (Retina, 13-inch, Late 2013)
2.4 GHz Core i5
8GB 1600 MHz DDR3
Mac HD
Graphics Intel Iris 1536 MB
Thoughts on how I can resolve this issue would be greatly appreciated.
Thanks,
Greg

Brenden,
Thanks for the reply.
I've gone your suggestions in detail and the keyboard is still not working.
From what I can tell this is a known issue with Yosemite.
https://discussions.apple.com/thread/5676379
Someone at Apple must be able to figure this one out.
Greg

How do I use my USB webcam with Yosemite?

Since upgrading to OS 10.10, my Mac Pro no longer recognizes my Gear Head USB webcam. Any suggestions?

If restarting Mac does not fix, use relevant suggestions from How to Troubleshoot iSight.
There are also some other suggestions in this discussion topic that have helped some users.
Message was edited by: EZ Jim
Mac OSX 10.10

How does one use an external microphone with the internal camera?

I want to use the internal camera because I don't have anything better but I want to use an external mic to record video and sound simultaneously, for a video blog. How does one accomplish this? I'm getting no help from the manual.

Try this. Connect your external mic, either through the audio line in port or, into a USB port if it is a USB mic and then go to System Preferences under the Apple and select the Sound icon under Hardware. Click on your mic shown in the list of input devices.
Hope that works for you.
Forest

How do I use a recording deck with Logic?

Hey Guys,
I bought Logic Express with my mac at the end of 2008 and have since been using it with the built in mic on the mac. Recently though I have bought some song backing tracks and want to record higher quality. I bought a small mixing deck, 6 main ports. I figured I would plug the deck into the headphones port in the back of my imac, then the mic and headphones into the mixing deck. When I use logic though, It doesn't pick up anything from the mic, it just goes though the built in mic. HOW DO I FIX THIS!!???
I would be greatly indebted to anyone who can help me.
Many thanks,
Angus x

The headphones port outputs audio signal from Logic. Plug the mixer into the lin-in port.
JG

How do i use a Multitimbral Sampler with Logic?

I purchased a third party multiTimbral soft sampler. I did this so i can have 16 tracks in the arrange window, each with it's own midi channel, for use with ONE instance of this softsampler. When i create 16 tracks set to Instrument #1, i need for each of these 16 tracks to have their own unique midi channel.
As it currently is, if i change the midi channel on one of these tracks, the midi channel changes for all of the tracks assigned to play Instrument #1. If it's not possible to have more than one channel for simultaneous use with instrument 1, then it's not possible to use any multi-timbral instruments. Surely this can't be. Logic is a professional product, for which many third party software vendors make synths and samplers. (many of these, such as the MachFive Sampler, are multitimbral)
PLEASE don't tell me that i should simply load another instance of the sampler for each desired channel! That would A) be a supreme waste of CPU, and B) it would only allow for 128 channels of midi to ever be used.
The reason i purchased a third party soft sampler was because i want to have a great deal of sampler and synth channels available. With a multitimbral sampler, I'm able to have 128 channels of sample programs with just 8 instances of the MachFive loaded. This would allow me to have many available instrument slots for use with the various Logic soft synths.
Is there any way to have 16 seperate tracks in the arrange window, all with different midi channels, and all set to play one Instrument?
PowerMac G4 dual 1.25 ghz Mac OS X (10.4.4) MOTU MachFive SoftSampler

1: select an instrument channel, go the parameter of the channel then change the midi channel to "ALL"
2: insert the Multitimbral sampler of your choice ( RMX, hypersonic or what ever) and load the sounds you want onto them
3: open environment, in the environment parameter it shows AUDIO click hold it and select ALL OBJECT, then go to view and untick "BY TEXT"
4: connect the GM DEVICE to the channel that has the Multitimbral Sampler on it'll ask Do you want to remove the channels port setting? click remove
thats it
Now go to the arrange window and you can use all the 16 midi channels to control one Multitimbral Sampler
that means midi channel 1 will control what ever sound is loaded in the first slot on the Multitimbral Sampler
lemme know if there was a mistake along the line, i'm a bit tired gotta help out
stash

How do I use a usb web cam with MacBook Pro

How do I use a web camera with a MacBook Pro? I want to run it through my laptop so I can project it on a screen for teaching a class.

b. todd wrote:
Can I record directly into iMovie with a usb web cam instead of iSight?
You can try it, but probably not.
This Apple article http://support.apple.com/kb/PH2134 explains that a Firewire-connected, tape-based camera or camcorder mode will work.
If you don't have access to one that works, a simple workaround is to record your video with QuickTimeX Player (the v.10.x one from Lion). You can import that recorded video into iMovie for editing.
If your Mac OS is earlier than Lion whose QuickTime does not offer movie recording as installed, use QuickTime7 Pro for recording.
Message was edited by: EZ Jim
Mac OSX 10.7.3

USB microphone with adobe flash player on chromebook

I am using fash player to record a youtube video on my samsung chromebook. I am trying to use a USB microphone to do the recording. My chromebook recognizes the USB microphone when I plug it in and I select it in my chromebooks taskbar and select it as the audio input source. When i go to record my video on flashplayer and select the microhpone in flash player icon the only option I have is default. Does this mean I cant use my USB microphone or does default refer to whatever microphone i have selected in my chromebooks preference as the audio input.

What are microphone settings?
Microphone settings allow you to select a microphone, adjust its sensitivity, and reduce the echo that may be coming from your speakers.
What happens if I do nothing?
Adobe Flash Player automatically detects any default microphone or other audio recorder on your computer, and sets microphone sensitivity to a medium value.
Note that Flash Player asks your permission before allowing an application to access your camera or microphone. See Privacy pop-up question.
What can I change here?
You can select a different microphone, adjust microphone sensitivity, and reduce echo. The settings you select here apply immediately to the active Flash application. To change the default microphone, select another microphone from the pop-up menu.
To test your microphone, speak in a normal tone of voice and watch the indicator on the left. When the indicator shows yellow, your microphone is sensitive enough for Flash Player to pick up sound. To increase or decrease your microphone's sensitivity, move the slider to the right or the left, respectively.
If you are using speakers instead of headphones, select Reduce Echo. Reducing echo has the effect of reducing the noise coming from your microphone through your speakers.
What if Flash Player doesn't find a microphone?
If Flash Player cannot locate a microphone or other audio device on your computer, the player displays the warning "No microphone detected." Read the documentation for your computer and your microphone to make sure your microphone is installed correctly.
How do I test my speakers?
Click Test Speaker in the application shown below to hear a sample sound. Adjust your speakers or headset so the sound is at a comfortable level.
How can I display this panel again?
You may want to display this panel again if, for example, you want Flash Player to use a different microphone. To display the Microphone panel:
Right-click (Windows) or Control-click (Macintosh) the application image while it is playing.
From the context menu, select Settings, and then click the Microphone tab.
I don't see the Microphone tab, so I can't display this panel.
If your computer or device doesn't support audio recording using Flash Player, you cannot select a microphone to use, and this panel doesn't appear.

How do I use Edge Web Fonts with Muse?

How do I use Edge Web Fonts with Muse - is it an update to load, a stand alone, how does it interface with Muse? I've updated to CC but have no info on this.

Hello,
Is there a reason why you want to use Edge Web Fonts with Adobe Muse?
Assuming you wish to improve typography of your web pages, you should know that Muse is fully integrated with Typekit. This allows you to access and apply over 500 web fonts from within Muse. Here's how you do it:
Select a text component within Muse, and click the Text drop-down.
Select Add Web Fonts option, to pop-open the Add Web Fonts dialog.
Browse and apply fonts per your design needs.
Muse also allows you to create paragraph styles that you can save and apply to chunks of text, a la InDesign. Watch this video for more information: http://tv.adobe.com/watch/muse-feature-tour/using-typekit-with-adobe-muse/
Also take a look at these help files to see if they help you:
http://helpx.adobe.com/muse/tutorials/typography-muse-part-1.html
http://helpx.adobe.com/muse/tutorials/typography-muse-part-2.html
http://helpx.adobe.com/muse/tutorials/typography-muse-part-3.html
Hope this helps!
Regards,
Suhas Yogin

How do I use Qt and OpenGL with Visual Studio

Hi! I mainly want to program in C++ and I want to use Qt and OpenGL with Visual Studio.
I am currently revising C++ and later on i am going to start reading Qt and OpenGL. I have a background of
Embedded firmware design(C and Assembly).
The Visual Studio Version I have is 2013 ultimate. How do I use Qt and OpenGL with Visual Studio?
Thanks
Alexandros

Hi ClassicalGuitar,
The forum supports VS setup and installation. And your issue is not about the forum. I will move the thread to off-topic forum. Thanks for your understanding.
Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click HERE to participate the survey.

How do i use my mac book with my HP 6510 e all in one series printer

how do i use my mac book with HP photosmart 6510 e all in one series

Hello Marilynatsea,
Thanks for using Apple Support Communities.
To learn more about printing in OS X on your Mac, and how to add a printer, take a look at the article linked to below.
Mac Basics: Printing in OS X - Apple Support
Cheers,
Alex H.

How do I use my gigaware webcam with my mac?

How do I use my gigaware webcam with my mac? I just bought this webcam on amazon http://www.amazon.com/gp/product/B00IJE0ISS/ref=oh_aui_detailpage_o07_s00?ie=UTF 8&psc=1 and I want to use it with my mac. Is there an adapter or any software to make it compatible? Thanks.

Your amazon link states, in part, that this webcam is:
Compatible with Microsoft Windows 7,Vista, XP, 2000
Use a Mac OS X Compatible Webcam like one of those shown in the linked article instead.
For best compatibility and security, also update your OS X Mavericks (10.9.2) to the current OS X version by restarting Mac and then downloading and installing OS X Mavericks 10.9.4 Update (Combo).

How do I use a USB microphone with logic?

Similar Messages

Maybe you are looking for