How do I use a usb wireless on a mac pro desktop

How do I use a usb wireless adapter on a mac pro desktop.  I installed the driver, and the screen for realtek wireless adapter recognizes the network, but it does not appear in system preferences

Try a restart.
If no joy, read the manual, here:
http://eshop.macsales.com/tech_center/manuals/MAXPower/NT-WiFi-USBn_2012.pdf

Similar Messages

  • How do I use a usb web cam with MacBook Pro

    How do I use a web camera with a MacBook Pro?  I want to run it through my laptop so I can project it on a screen for teaching a class.

    b. todd wrote:
    Can I record directly into iMovie with a usb web cam instead of iSight?
    You can try it, but probably not. 
    This Apple article http://support.apple.com/kb/PH2134 explains that a Firewire-connected, tape-based camera or camcorder mode will work.
    If you don't have access to one that works, a simple workaround is to record your video with QuickTimeX Player (the v.10.x one from Lion).  You can import that recorded video into iMovie for editing.
    If your Mac OS is earlier than Lion whose QuickTime does not offer movie recording as installed, use QuickTime7 Pro for recording.
    Message was edited by: EZ Jim
    Mac OSX 10.7.3

  • How can I use an SSD in a 2006 Mac Pro 1,1 2.66Ghz

    Hi everyone,
    I'm trying to work out how to use my new SSD in an old 2006 MacPro. Bear with me, I'm not an expert and trying to work out what is best for me.
    I recently bought a 1TB Samsung SSD 840EVO to use in my old Mac Pro, not to use as my main machine, but as a network slave to save RAM with sound sample libraries.
    I also got an Apricorn SATA III Velocity Solo x2 - Extreme Performance SSD Upgrade Kit to get high speeds
    http://www.apricorn.com/products/desktop-ssd-hdd-upgrade-kits/vel-solox2.html?gc lid=CLOi46bvqMICFVGCMgodPG8AdA
    After installing the HD using the SATAIII connector in a PCIe slot, I did a hard drive test and realised I could only get about 160mbps, not 300-500mpbs which I think the SSD should run at. I had my friend test it on his machine too, and we realised the problem is the "Link Width" which says "x1" and not "x4" or something, so that the speed isn't running at full speed.
    So apparently it's not compatable.
    Apparently what I CAN do is install it in a regular Hard Drive bay with a sled, which will be SATA II ... will that work?
    I think I can use this: http://www.amazon.com/Mac-Pro-2006-2008-Sled-Drives/dp/B00AN55034
    Anyway - is this what I should be doing to get the fastest available connection?
    Any advice would be great- thanks!!!

    SATA II is generally just fine, no fuss no muss, for the system. Using PCIe to boot adds problems and most if not all such PCIe SSD cards do NOT WORK in 32-bit Mac Pro 1,1 and 2,1 (and the 3,1 is also sometimes difficult with some cards).
    Data uses though are useful, work, and benefit. Lightroom, Aperture, scratch, even iPhoto - all those graphic libraries.
    I would rewrite and make it "will the native SATA II drive bays" work, and the answer to that is YES. But not faster.
    You have a 4x and 8x slot, so one of those is fine.
    It is the reads and zero latency seeks along with queue depth and high 90K IOs per sec that help an SSD shine.
    Putting a 250GB or 500GB EVO 840 is the easiest and best return on system improvement you can make for $120-240 (plus $14 for Icy Dock adapter).
    Even the 2008 has two 4x PCIe 1.1 slots. The 2009 has PCIe 4x 2.1 slots that share bandwidth and cap out (only learned from stripping SSDs using two PCIe cards and 2-4 SSDs), so they aren't perfect either! ONLY the 5,1 really has the best PCIe design and setup.
    Sonnet only supports or recommends their Tempo Pro which is what I bought, so I don't know off hand how well yours works and if it even will. Some cards do require EFI 64-bit, AND 10.8.x or later, and maybe even PCIe 2.0 - but only to work, ie they don't work or not supported in PCIe 1.0... but NOT about the bandwidth.
    Booting in 10 seconds is nice. Launching a full dozen apps in 10 seconds (and ready to use) also. Only larger program suites takes 20 seconds now.
    250MB/sec is nothing to sneeze at when it comes to boot drive SSD.

  • No airport card easiest way to access wireless can you use a usb wireless on the mac

    My mac pro is not equiped wirelessly, what is the easiest way to access internet wirelessly.
    CanI purchase a usb wireless to work on the mac pro?

    yes, you sure can.usb wifi adapters are availabe for your Mac Pro. try afterthemac.com. I don't work for them, just the first page that popped up. Dlink
    makes something, but you may have heard a few stories about how DLink might be
    'iffy' (someone else's words, not mine). Oh, and apparently, you can make an antenna signal  booster out of an aluminum can.....
    anyways, best of luck
    John B

  • How can I use Final Cut Express in a Mac Pro

    I want to know how could I use my Final Cut Express HD programm (Version 3) in my new Mac Pro.

    FCE 3.0 was not designed to work with Intel based Macs when they were introduced years ago so you have no chance with a modern Mac.
    You must upgrade to FCE 4 unless you want to move onto Final Cut Pro X which is designed to be used with the latest technology.
    Final Cut Studio 3 will also work OK.

  • I am a senior citizen newbie to apple.  I have just downloaded my pictures from my camera.  How do i remove my usb port from my mac pro without damaging anything?

    I am a senior citizen newbie to apple.  I have just downloaded my pictures to my Mac Pro.  How do I remove the usb port without damaging anything.  I know I shouldn't just pull it out.

    The iphone is a "plug and play" device.  It is safe to unplug it without "ejecting it".  If you want to be sure it is safe open itunes and under devices next to your iphone you should see the eject symbol like a line with an up arrow above it, click that.  Once you no longer see the iphone listed under devices it'll be safe to remove.

  • Can I use a usb bluetooth adaptor with mac pro which already has bluetooth?

    Hi All,
    I have an early 2008 Mac Pro. I have a bluetooth sound device that I'd like to use across the other side of the house. The problem is that the in-built bluetooth transceiver is limited in area and i have a usb transceiver that has 15m broadcast range. Is there a way i can make my Mac Pro use the usb dongle and not the internal hardware..?

    You can disable the internal bluetooth radio. As long as you have drivers for your USB Bluetooth adapter you should be able to use it.

  • How can I use a USB keyboard with my Macbook Pro?

    My MBP will not recognize my brand new USB keyboard.
    I have tried the keyboard on two other Macbook Air's and it works perfectly.
    My MBP:
    OS X Yosemite
    10.10.1
    Macbook Pro (Retina, 13-inch, Late 2013)
    2.4 GHz Core i5
    8GB 1600 MHz DDR3
    Mac HD
    Graphics Intel Iris 1536 MB
    Thoughts on how I can resolve this issue would be greatly appreciated.
    Thanks,
    Greg

    Brenden,
    Thanks for the reply.
    I've gone your suggestions in detail and the keyboard is still not working.
    From what I can tell this is a known issue with Yosemite.
    https://discussions.apple.com/thread/5676379
    Someone at Apple must be able to figure this one out.
    Greg

  • Full backup ( ~ 1 TB ) using external HD - speed USB vs. Firewire vs. eSATA  - what are relative speeds - how to install eSATA on mid-2010 Mac Pro desktop ( dual hex-core processors)_

        Hi All,
         I'm trying to resume regular scheduled Full backup ( ~ 1 TB ) of drives using external HD (to allow off-site redundant backup storage) .
         What are relative speeds of USB vs. Firewire vs. eSATA ?
         I suspect eSATA connection may be considerably faster … how to install eSATA on mid-2010 Mac Pro desktop ( dual hex-core processors)?
          ( The quicker and easier backup protocol is, the more likely one is to use it to backup on a routine repetitive basis.)
    Thanks

    Jim Bogy wrote:
    ...I suspect eSATA connection may be considerably faster … how to install eSATA on mid-2010 Mac Pro desktop ( dual hex-core processors)?
          ( The quicker and easier backup protocol is, the more likely one is to use it to backup on a routine repetitive basis.)
    Adding a USB 3.0+eSATA PCIe card, which The hatter mentions, is the best solution that I've found. See http://eshop.macsales.com/item/CalDigit/FASTA6GU3/. The card is not cheap, but the USB 3.0 works flawlessly (which can't be assumed; ask me how I know) and the eSATA connection allows booting from the connected drive. Grant Bennet-Alder's point about HD speed is important to consider; in addition, the size of the individual files being backed up and where on the backup disk they're going will affect overall transfer speed. For example, using the USB 3.0 connection on that CalDigit card going to a Toshiba 3TB external, the transfer rate for a big file (say a virtual machine file) from an internal SSD boot drive was about 145 MB/sec while a bunch of little files might drop to 30 MB/sec and both rates decrease as an inner partition on the external is used. All told, a nearly 700 GB backup took under 1.5 hours. Using a HD as the source added almost an extra hour, though a WD external was used for that. Using a WD green drive plugged into this http://eshop.macsales.com/item/NewerTech/FWU3ES2HDK/ with an eSATA connection took about 2.5 hours also, but that was bootable whereas the USB 3.0 connection is not.
    Another point to consider is that USB 3.0 is ubiquitous on PC's now so there's lots of price competition for externals; not so much for eSATA externals.

  • Can i use a Usb wireless for my ibook?

    Can i use a Usb wireless for my ibook?

    Hi, Kimberly. Welcome to Apple Support Communities.
    If you mean a USB wireless dongle, the answer is yes (as long as it is Mac-compatible).
    http://eshop.macsales.com/item/Newer%20Technology/MXP2802GU2/
    http://eshop.macsales.com/item/NewerTech/MXP2802NU2C/

  • How do I use my gigaware webcam with my mac?

    How do I use my gigaware webcam with my mac? I just bought this webcam on amazon http://www.amazon.com/gp/product/B00IJE0ISS/ref=oh_aui_detailpage_o07_s00?ie=UTF 8&psc=1 and I want to use it with my mac. Is there an adapter or any software to make it compatible? Thanks.

    Your amazon link states, in part, that this webcam is:
    Compatible with Microsoft Windows 7,Vista, XP, 2000
    Use a Mac OS X Compatible Webcam like one of those shown in the linked article instead.
    For best compatibility and security, also update your OS X Mavericks (10.9.2) to the current OS X version by restarting Mac and then downloading and installing OS X Mavericks 10.9.4 Update (Combo).

  • How do I use a foot pedal with my mac?

    how do I use a foot pedal with my mac to use on YouTube?

    Can you be more specific? What kind of foot pedal? What is the foot pedal used for?

  • How do i use an external display with my macbook pro?

    How do I use an external display with a macbook pro?

    Just buy the proper adapter cord, such as MiniDisplay port to HDMI for example.  Plug it in and it will be automatically recognized.  Use System Preferences > Displays to set options.
    The display can Mirror your primary desktop or Extend the Desktop.
    Regards,
    Captfred

  • How do i use my apple remote on my macbook pro

    how do i use my apple remote on my macbook pro?

    Hi,
    System Preferences > Accounts > Your Account
    Select current  Pic and chose to Change it.
    You get an option to take a SnapShot.
    Quicktime will also be able to access it and record using Quicktime  X in Snow Leopard.
    Check the Menu items for New Recording.
    MSN for Mac can use it (It depend on version and in some cases whether you are connected to the correct type of Windows server)
    Yahoo (This is in Beta 3 and has been for years)
    Results can vary.
    A Web Browser with the Flash Plug-in active can access the camera on certain Web Sites that run video Chat rooms
    See Koowy
    (Type anything to Create a Room Name
    On the New Page allow access to the camera in the Flash Pop Up - You may need to use the tabs to Select Camera type.
    Send Buddy the URL of that page).
    Also see Here (Work by EZ Jim)
    I may receive some form of compensation, financial or otherwise, from my recommendation or link.
    9:44 PM      Saturday; May 7, 2011
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.7)
    , Mac OS X (10.6.7),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Can I use an USB disc with my macbook pro bought in 2005.  What capacity will it take 2.00 or 3.00?

    can I use an USB disc with my macbook pro bought in 2005.  What capacity will it take 2.00 or 3.00?

    The first MacBook Pro's were not released until the beginning of 2006, and they had USB 2 ports.
    Anything available new in 2005 would have been a PowerBook G4 and they also had USB 2 ports.
    A USB 3 disk will just transfer data slower then it could do, if you plug it into a USB 2 port though, so you can buy either.

Maybe you are looking for

  • N97 now so slow and laggy & cant access photo albu...

    All of a sudden my N97 is now laggy beyond belief and I cant use it hardly, its just so slow and is freezing and doing all sorts now. Ive had it 3 months with no worries. Plus I cant seem to access the photo album, I press captured images and it does

  • Can't drag

    When trying to drag & drop, either files or folders, from one folder to either another or an application like iPhoto or Aperture, the green + sign shows but nothing happens, as in it doesn't release into the required destination. Not only that but th

  • C:\Windows\system32\KERNELBASE.dll ccmexec.exe

    I tried to search the solution , But I couldn't but I saw lot of posts the same issue in different blogs /forums .  If any one / MVP's can give the solution for this issue.  For your reference below two links for problem which i am taking  https://so

  • Extending materials to WM views

    Dear Experts, I am extending materials to WM views. For some reason its not letting me to do it as I can not see the WM views in material master. Where would I do a config setting in order to extend the views to WM ? Thanks for your time in advance

  • 2 iClouds, 2 iPhones, 1 Mac, 1 address book...lion

    Hello, Has anyone here setup using two iCloud accounts (for two different users) on one Mac etc yet? I want to know how it works. - I have my iPhone, and I sync my calender from iCal to iCloud and my contacts to iCloud (Safari on my Mac and my iPhone