How do I use Airport Extreme to act as a wireless receiver for a Mac Pro?

Hello -
I'm trying to use an Airport Extreme (1st Generation) as a wireless receiver for a Mac Pro but I can't figure out how. My main modem / wireless router (non-Apple) is upstairs. My Mac Pro is down stairs. I'm looking to get internet connection for that Mac Pro downstairs. Is it possible to use the Airport Extreme to connect the Mac Pro to the wireless internet provided by my wireless router?
Thanks for the help.
Nathan

Is it possible to use the Airport Extreme to connect the Mac Pro to the wireless internet provided by my wireless router?
Unfortunately, Apple designed their routers to work with other Apple routers. It would be extremely unilikely that the AirPort Exteme could be configured to work with a router from another manufacturer.
The AirPort Extreme would need to be configured to "Extend a wireless network", but an error message is almost surely to occur when you try this.
There are other alternatives, but they would involve more hardware. Post back if you are interested.

Similar Messages

HT4145 How can I use an Airport Extreme to act as a Range Extender for an Alcatel One Touch Y800Z WiFi modem/router? I get a message saying it cannot be extended. Thank you. Arup

How can I use an Airport Extreme to act as a Range Extender for an Alcatel One Touch Y800Z WiFi modem/router? As we live in a rural area and our landline broadband speeds are awful, I have moved on to a 3G provider in the UK (EE/Orange) and set up the wireless modem which is working very well with an iMac. I have an Airport Extreme base station which was previously connected with an Ethernet cable to the landline router, and two Airport Express stations as Range Extenders. I would now like to use the Airport Extreme and the two Express stations to extend the range of the Alcatel WiFi device. I have tried automatic and manual set up with the Airport Utility but at the crucial step for selecting a network to extend, although the WiFi device is recognised, I get a message saying it cannot be extended.
Thank you for any help you can provide.
Arup

This is a problem with a lot of cheap end wifi hotspot like devices.. sometimes you can just swap the sim out to a real 3G wireless router.. that is a better approach IMHO than wireless repeater ever will be.
In the meantime..
Have a go with the suggestion.. place the express as wireless bridge. With a computer connected to the wifi from alcatel unit.. (I am amazed Alcatel still are in domestic market.. I thought they sold out). Set the express to join the wifi.. you do this in the airport utility.. old one is easy.. but in v6 you have to trust to luck so to speak and hope the auto setup works.. tell us if you have trouble.
With the Express bridging.. you can then plug it by ethernet into the TC.. which will be in router bridge..
ie
You can then run the connection from wireless or ethernet on the TC.. and it will relay back to the alcatel for internet.. all a bit dodgy but who knows.. it may give you what you need.
Wireless repeater is never particularly reliable in my experience. I would avoid it if possible.

How do you use Airport extreme at hotels etc, when traveling? I can plug my computer into the Airport with my ethernet but how does Airport pickup signal?

How do you use Airport extreme at hotels etc, when traveling? I can plug my computer into the Airport with my ethernet but how does Airport pickup signal? What equipment & devices do I need to travel with to make this possible?

You may mean the AirPort Express.....not AirPort Extreme.....as the Express is a popular travel router.
The whole idea behind using this device is that the hotel must provide an Ethernet jack in the hotel room. Then you connect the AirPort Express to the Ethernet jack with an Ethernet cable and configure it to provide your own wireless network in the room. You still have to agree to terms, pay the fees, etc.
The problem with this approach is that it is getting very difficult to find hotels in North America that prrovide an Ethernet jack....most have moved to wireless networks and the others are not far behind.
So, if the hotel is already providing a wireless signal, the AirPort Express is of no use in that situation.
If you normally stay at the same hotels, and know that they provide Ethernet ports, an AirPort Express might make sense in terms of convenience.

How do I use Airport Extreme to limit internet time for my kids? His computer is hardwired to the modem.

How do I use Airport Extreme to limit internet time for my kids? His computer is hardwired to the modem.

You can set up daily time limits for each computer that connects using wireless, but it is not possible to do this when a computer is connecting directly using a wired Ethernet connection.
Open Macintosh HD > Applications > Utilities > AirPort Utility on your Mac and click Manual Setup
Click the Access Control tab below the icons
Select Timed Access
For more details on this, click the Help menu at the top of the screen and enter the following phrase into the search box:
Controlling access to your wireless network
A more sophisticated approach would be to use a service provided by OpenDNS. From your computer, this would allow you to monitor web sites visited, and block any unsuitable sites. More info is here:
http://www.opendns.com/landings/familyshield

How do I use AirPort Extreme to be able print from my MacBook Pro AND a PC. If I connect printer into AirPort, I can only print on laptop. If printer is connected to PC hard drive, I can only print on desk top. How do I configure this to make both print?

How do I use AirPort Extreme to be able print from my MacBook Pro AND a PC. If I connect printer into AirPort, I can only print on laptop. If printer is connected to PC hard drive, I can only print on desk top. How do I configure this to make both print?

If you have not already done so, your chances will really improve if you....
1) Connect the printer to the USB port on the AirPort Extreme
2) Download and install Bonjour Print Services for Windows on the PC

How do I connect Airport Extreme in place of Buffalo wireless router in Japan?

How do I connect Airport Extreme to replace current Buffalo wireless router? ISP is StarCat in Japan.

Hello DM1960,
Thanks for using Apple Support Communities.
To set up and configure your AirPort Extreme please follow the steps in the article below:
OS X Mavericks: Set up an Apple wireless device
http://support.apple.com/kb/PH14058
Take care,
Alex H.

I hope this might interest someone. The situation; 3 floors,I am having trouble with an an Airport Extreme, 802.11n on the top floor and a Mac Pro 3.1 on the bottom floor. Not always but often it has trouble seeing the Airport and making a connection. I h

I'm not sure how to post a message. I hope this might interest someone. The situation; 3 floors,I am having trouble with an an Airport Extreme, 802.11n on the top floor and a Mac Pro 3.1 on the bottom floor. Not always but often it has trouble seeing the Airport and making a connection. I have an older Airport Express, would it help to install it? would it work best if it was installed in the same room? should it be installed half way in between? Get another Extreme? The Mac Book Pro on the middle floor can see 11 networks in the neighbourhood if that might be causing a problem or would if I installed the Express. Thank for your consideration.

Thanks for your time ... I appologize for the font and colour, I compossed the question in pages and failed to notice the font colour as grey ... there are a variety of computers of various ages so I think it is using a setting that allows both 5G and 2.4 ... the connection to the Airport is thru a cable modem and cable does run throuhout the house ... maybe those hard wires would be a place to look at ... do you think that putting the 'Express' on the second floor might help ... thanks again ...

How do i use my imac 21.5" 2011 as a display for my macbook pro late 2011, through thunderbolt cable ? I have tried and it doesnt seem to work, neither does target disk mode.

How do i use my imac 21.5" 2011 as a display for my macbook pro late 2011, through thunderbolt cable ? I have tried and it doesnt seem to work, neither does target disk mode.
Could it be a borked cable ? I just bought it new from the store today, i have updated both imac and macbook pro to latest thunderbolt firmware and updates. Both 10.7.3.
MacBook Pro:
Vendor Name:    Apple, Inc.
Device Name:    MacBook Pro
UID:    0x0001000A17016E60
Firmware Version:    22,1
Port:
Status:    No devices connected
Link Status:    7
Port Micro Firmware Version:    FFFF.FF.FF

You are correct, here is what Apple Says:
http://support.apple.com/kb/TS3775
I was able to find these instructions, however they referr to 2009-2011 27" iMacs. I think it's the same, if it's not then contact Apple directly for instructions. If either of the machines is less than 90 days old or covered by AppleCare then call AppleCare tomorrow for help, they should be able to easily answer this for you. You will find the number in your manual or you can use the AppleCare Contact Info link.
Your iMac should automatically recognize the presence of a digital video signal at the Mini DisplayPort and enter Target Display Mode.
If your iMac does not automatically enter Target Display Mode, press command + F2 to manually enter Target Display Mode.

How can I use Airport Extreme just as a file server - no wifi

I'm setting up a new Apple environment for an invalid music buff. Here are the components, all newly purchased.
MacBook Pro
Airport Extreme
Airport Express
I was handed a G-Drive with a large iTunes file collection on it.
The user will have Comcast as his network provider and he already has a Comcast wireless router, so none of the Apple devices will need to be used as a wireless router or base station (assuming I understand what Apple means by a "base station").
The Airport Express has the primary function of acting as an AirPlay device, feeding an analog music signal to the user's hi-end audio system (Denon integrated amplifier, Thiel Loudspeakers).
The Airport Extreme has the sole function of acting as a network file share for the G-Drive.
The MacBook Pro will operate iTunes and will get its music files from the network shared G-Drive and send it to the AirPlay device, which will feed the music signal to the hi-end audio system.
I am able to get the Airport Express to simply act as a wireless client on the Comcast provided wireless network. The MacBook Pro is also on the network and can see the Airport Express as an AirPlay device and send music to the audio system.
What I'm having problems with is getting the Airport Extreme to simply act as a file server on this LAN. It can either work in bridged mode and just be a wireless network client, or I can readily run an ethernet cable from the Airport Extreme to the Airport Express, or even to the Comcast router.
I tried to connect the MacBook Pro to the Airport Extreme with an ethernet cable and get it to "join an existing network", but it refused to recognize the Comcast provided network. All it could see were some networks in homes nearby.
I was hoping that if I just ran a network cable between the Airport Extreme and the Airport Express, that it would just get a network address over DHCP through the Airport Express. Nope.
So I'm stuck. How do I get the Airport Express to simply act as a file server for the G-Drive on my LAN?

+Can I use the Airport Extreme base station as a wired router, with wireless disabled for the time being?+
Sure, but it will probably take just as much time...a few minutes....to turn the wireless off than simply change the name on the default wireless network to your personal choice.
The AirPort Extreme is pre-configured to create a wireless network when it is hooked up to a modem. All you need do is assign a name to this network and establish a password. If you don't want to do this, you can turn the wireless off and use the device as a wired only router.
AirPort Utility, the application that is used to setup the AirPort Extreme has a simple guided step by step process for you to configure the device the way you want.

How to use Airport Extreme to create a second wireless network with different IP addresses behind an existing modem/router?

Hi,
I have an existing modem/router from my ISP that does DHCP and NAT with base IP 192.168.1.1 distributed in the wireless network. I use this wireless network for our private devices. I could turn off the DHCP server in this first router, but there isn't a separate setting to turn off NAT.
I want to connect my Airport Extreme (4th gen) to this existing router to create a separate wireless network for visiting guests, where IP addresses of 10.0.0.0 etc. are used. So I do not want to use the Airport Extreme in bridge mode, as I would like to keep the devices on the first network 'invisible' for those on the second network. (P.S. when connected in bridge mode, the Airport works well and can distribute a network with a different name from the first. It's just that I would feel more comfortable about our privacy if the Airport were to distribute a different IP range. False security, maybe?)
I've tried doing this by 'Sharing a public IP address' in Airport Utility's Internet tab, leaving TCP/IP's setting to 'via DHCP', setting DHCP addresses to start with 10.0.0.2 up to 200 with all else blank, and not using a standard host nor NAT-PMP in the NAT tab.
When I do this the Airport complains of a 'double NAT issue'. Internet connectivity seems to be OK, but when switching between the two networks on my Mac I get complaints about my IP address being in use by another device intermittently.
Can anyone help in how to get the 'double NAT issue' resolved?
Thanks!

So if someone is connected to the modem/router network they will be able to see the HD I will have put in to the AirPort Extreme?
As I said above.....since the modem/router and AirPort are bridged, devices on the modem/router wireless will be able to "see" devices on the AirPort wireless, and vice versa.....
If they can see the HD connected to the AirPort Extreme, will they be able to access it
Yes, unless you plan to password protect the drive connected to the AirPort Extreme.
or will they still need the password needed to get onto the AirPort Extreme network?
The modem/router and AirPort Extreme are bridged. They are on the same network. All devices are on the same network when the modem/router and AirPort are bridged. Not sure how else that I can say this.
Also, because it is bridged, I shouldn't have any problems accessing the HD I will have connected to the AirPort Extreme from an external location?
Accessing devices from a remote location is never easy....and a topic for a different post/discussion. If you have a "static" Internet IP address from your provider, and have all the details on how to forward ports on your modem/router, you are off to a good start.
Apparently there is some addressing issues because devices can be seen as "Double IP" because the modem/router would have allocated IP's as well as the AirPort allocating IP's thus making connections slower until resolved
When you "bridge", all IP addresses are issued by one device. There will be no conflicts on the network, since they are bridged.
Once again, in very simple terms, you have two doors (access points) that open into the same room (network). One "door" is the modem/router and the other "door" is the AirPort Extreme. They are on the same network....("room") because they are bridged.

How do I use Airport Extreme to create wired access point on wireless network?

Bit of an odd situation. I just went from cable to DSL at home and the modem moved from right by my computer to upstairs.
Trouble is, there's no real easy way to get a cable from the modem upstairs to my X-box (sans wireless connector) downstairs.
I could buy the wireless adaptor for the X-Box, but I was hoping I wouldn't have to spend any more money.
I have my airport extreme, and I was hoping I could use it to create a wired access point on the network, recieving the signal from the wireless modem upstairs and allowing me to plug in the X-Box.
Is this possible? If so, how? I've been through the config panel about a dozen times, but can't figure out what combination to set up.
Thanks.

Will it work if I use the express to create the network?
Yes, providing that you have an 802.11n version of the AirPort Express and the Express has been configured to "Allow this network to be extended".
Then, the AirPort Extreme can be configured to "extend" the Express network. When you do this, the AirPort Extreme will provide more wireless coverage and the LAN Ethernet ports are enabled, so you can connect an Ethernet device.
This will not be a "normal" Ethernet connection. It will only work as well as the wireless "hop" between the Express and Extreme allow.
For best results and performance, a wired connection through the hole in the wall is always best. If you decide to do this, you will need the "new" AirPort Express with both a WAN and LAN port on the device. But, you could try wireless first to see if it will meet your goals before you reach for the tools.

How do I use airport extreme to control individual device access?

I don't understand how I can control individual device access to the web using my AirPort Extreme.
I set up the network on a PC (for technical reasons) but hoping to control access of individual devices (including a Mac but also iPods and iPads) to the web using an iPad (although can use the PC if necessary). I have downloaded AirPort Utility on the PC and an iPad but can't work out what to do next.
Can anyone please provide some instructions or point me in the right direction?

The AE has no controls except timed access to wireless.. is that what you are after??

How do I use AirPort Extreme to extend my wifi network - have BT HomeHub 5

AirPort Extreme is plugged into my HomeHub 5 and I have set it up as extending a network using the Airport Utility, but it isn't finding the network - the light is orange
Please can someone help me.
Thanks
Joanna

Please check out the following Apple Support article on how to configure both devices for a roaming network. The "Extend a network" mode on the AirPort Extreme will NOT work in your setup.

From iPad how do I use airport extreme to print to Epson R340

Can't print from my iPad through Airport Extreme to my Epson R340 printer. Have no problem printing from my macbook air.

Unfortunately, it appears that your Epson is not AirPrint compatible. See the Apple support document below for more details.
http://support.apple.com/kb/HT4356
It's always possible that Epson may have updated the drivers recently to allow printing directly from the iPad, so you might want to check with Epson Support to see if that is the case.
A workaround that might work is to downloand and install an application like Printopia on your Mac. There's a free trial, so you will know in about 60 seconds whether this work for you or not.
The downside to the workaround is that your Mac must be running to allow the iPad to print using Printopia.
Printopia - AirPrint to Any Printer - Print from iPad - Print from iPhone ...

How do i use airport extreme to extend the range of my imac

I have an 2012 Imac and I would like to plug the Internet to my imac and use the the imac wireless and use my airport express to extend the range of the imac wireless signal. I am having an awfully hard time figuring this out - can anyone pass along a link to a document or any suggestions?
Thanks!

Apple's instructions for this are here:
http://support.apple.com/kb/HT4259
Although two AirPort Extremes are pictured in the example, the setup for a Time Capsule and AirPort Express would be exactly the same.
In general, a good starting location for the AirPort Express would be a point that is approximately half the distance from the Time Capsule and the area that needs more wireless coverage. You may need to experiment with the location of the Express a bit depending on the number of obstructions like walls and/or ceilings in the signal path

How do I use Airport Extreme to act as a wireless receiver for a Mac Pro?

Similar Messages

Maybe you are looking for